Report on difference between PO price and Material standard price

Hi,
We need a report on Purchase price difference, which is report showing Open PO price & Material standard price, if there is a price difference
This need to be run every day to avoid buyer changing price at PO level unless there is a valid reason
Similarly difference if any between Schedule agreement price & Material master standard price
Please help

Hi,
There is no standard report available for this.
You need to develop one.
Considering your requirement, it can be achieved with a query as well provided you do not need complex functionality out of the report.
Hope this helps.

Similar Messages

What's the difference between UPK Professional and UPK standard

Hi
I want to know the difference between UPK Professional and UPK standard.
Thanks!

Hi,
In a nutshell, the primary difference is the use of Knowledge Center.
UPK Std makes use of limited usage tracking and reporting, whereas UPK Pro allows full use of the Knowledge Center and related technologies.
The Reports Management.pdf and User and Content Management.pdf documents highlight specifics as to what is only available in UPK Pro.
You will find these docs as part of the installation media.
Hope this helps.
Regards,
Greig

Difference between stock currency and material currency

Hi all,
I have noticed there is difference in Stock currency and Material currency in MB5L(List of stock overview). Both stock vaue should tally every month. But it is showing difference for the last month.
Could anybody help me how to find out this difference, I have checked the MR21 already, But there is no price difference.
Any suggestions????????
Tx,
Veena

Hello,
Transfer posting may involve or not involve the physical goods transfer. In the system you might do transfer posting from quality to unrestricted, or from one store location to another.
In transfer posting you remove and or replace materials from storage in one storage location and place them in another storage location.
That transction code you use for transfer posting MB1B with following movement types may be used
301, 303,305,311,411,309.
301 is Stock Transfer Between Plants in One Step
303 & 305 : Stock Transfer Between Plants in Two Steps
In stock transfer, it always involves physical movement of goods, like transfer between plants under same company code or different company codes.
Following types are possible with STO's
Stock Transport Order Without Delivery
Stock Transport Order with Delivery via Shipping
Stock Transport Order with Delivery and Billing Document/Invoice
http://help.sap.com/saphelp_470/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/content.htm
Please go through attach SAP document
BR,
Tushar

Difference between Item Proposal and Material Determination

Hi
What is the difference between the item proposal and material determination product proposal?
Thanks
KM

Hi
Item proposal and product proposal are the same.
Item proposal is the list of materials and order quantities that can be copied into the sales order from the customer master data.
We use VA51 to create the item proposal. Here we get a number.This number is then linked to the customer master data in the sales view. This is very commonly used.
Material determination is very closely related to item proposal /product proposal and is used to swap one material for another in the sales order using the condition technique. I have not seen Material determination procedures used in the projects I have worked.
Item Proposal or Product proposal:
Item proposal is same as product proposal & SAP uses the two terms interchangeably.
An item proposal is a list of materials and order quantities that can be copied into the sales order. Items can also be selected from a list and copied into a sales order.
1) Use transaction [VOV8] to configure the document type ("MS" for product proposal).
2) Use transaction [VA51] to create a proposal.
3) Enter the item proposal on the sales area data (sales tab) of the customer master record.
4) In [VA01] to create a sales order, Select Edit & propose items."
Material determination:
"Material determination uses the condition technique to swap one material for another when certain conditions apply. Material
determination is triggered by the material entered in the line item of the sales order.
Use transaction [VB11] to create a material determination condition record. And [OV12] for configuration of material determination.
Material determination is useful when old product is becoming obsolete or a new product is released by the company at specific date."
Thanks
CGRA

Business Content: Difference between Articles, Products and Material

Hi experts,
what is exactly the difference between the repositories of the business content for
- Articles
- Products and
- Material?
In which business cases do I have to choose which repository? Maybe articles for retail, material for manufacturing, etc.?
When I am using business content repositories is there any kind of (customizing) data that is necessary in more than one repository (e.g. plants, units, etc.) so that it has to be maintained twice in two different repositories?
Thanks for your answers. Of course helpful answers will be rewarded.
BR, bd

Hi,
First of all please make your question clear.
On the other hand I don't think you required two different kind
of repositories for a particular master data object(AS Material)
in terms of activation of standerd business content.
Because there is no relevance if you are considering to make two different repositories with two different field of Material say
Unit, Plants..it is kind of reference data for a particular object(Material). and by making two different Repo. there will be no relavance otherwise you can make it.
Hope it helps.
BR
Deepak

Differences between 8i enterprise and 8i standard edition

I have seen numerous discussions on whether 8i enterprise or 8i standard should be used in my division, can anyone point me to a source where I can get a comparision of the features between these two.
null

I have installed Oracle 10 XE and it just seems so easy to work with. There's a GUI for everything. It does not have SQL Plus(that I've seen), but there's an area to type your commands into inside the program that helps administrator the Database. I could not find any documents on 9.2 so Im reading documents on Orcale 10 that I have downloaded from this site.
I am wanting to practice creating, removing,resizing tablespaces, creating databases, and other DBA things. I also want to have triggers functions and procedures working on it too. I wrote some in college against Oracle 8i.

DIFFERENCE BETWEEN GROSS PRICE, NET PRICE AND EFFECTIVE PRICE

HI FRIENDS,
CAN YOU EXPLAIN ME IN DETAIL, WHAT IS THE DIFFERENCE BETWEEN GROSS PRICE, NET PRICE AND EFFECTIVE PRICE WITH A GOOD EXAMPLE.
REGARDS.

Hi,
Example: Material Price is Rs.1000/-
& Discount is 10% and tax is 10% and freight is Rs.50/-,Fixed( it may also %)
So Here the Material Price is called Gross Price Rs.1000/-
Gross Price (Rs.1000/-) Discount {Rs100/-(10% of Rs.1000/-)}= Net Price Rs.900/-
Here Net Price Rs.900/-
Tax Rs. 90/- (Rs.900/- +Rs.90=Rs990/- is called sub-total)
Freight Rs. 50/-
Rs.1040/-
The Total Price (Rs.1040/-) is called Effective Price.
Note:
1) Total value = total quantity x price
When a price changes, the value of the stock changes, since the value is calculated from the price:( its also depends on price Control)
2) Effective (actual) price: Net price minus cash discount and plus miscellaneous provisions and delivery costs as well as non-deductible input tax.
Regards,

What is difference between interactive list and interactive reports?

what is difference between interactive list and interactive reports?

hi check this..
interactive report/list means any input(double click or single click or user command ) on the screen will results a new screen with the corresponding fields....this is upto 20 levels only check this..
report .
start-of-selection.
write:/ 'this is the source list'.
at line-selection .
if sy-lsind = 1 .
write:/ ' this is the 1st list'.
elseif.
if sy-lsind = 2 .
write:/ ' this is the 2 list'.
if sy-lsind = 3 .
write:/ ' this is the 3 list'.
if sy-lsind = 4 .
write:/ ' this is the 4 list'.
if sy-lsind = 5 .
write:/ ' this is the 5 list'.
if sy-lsind = 6 .
write:/ ' this is the 6 list'.
if sy-lsind = 7 .
write:/ ' this is the 7 list'.
if sy-lsind = 8.
write:/ ' this is the 8 list'.
if sy-lsind = 9 .
write:/ ' this is the 9 list'.
if sy-lsind = 10 .
write:/ ' this is the 10 list'.
endif.
regards,
venkat

What is the difference between list display and grid display in alv report

Hai genious
i am a new of the abap, i dont know the alv report, i have a small doubt, can u please tell me what is the main difference between list display and grid display in alv report
thanks&regards
chinnu

Hi ,
1. For all practical purposes, they are the same.
2. Some differences:
a) from abap coding point of view,
alv list is done with Function modules,
alv gris can also be done with FM,
but can also be done using OO concepts.
b) Alv grid (using oo concept) requires
designing the screen layout .
Hence, in one screen, we can show more
then one alv grid
(we cannot show more than
one alv list on one screen)
c) ALV grid uses ActiveX controls
present on the Presentation Server.
Hence, it consumes More Memory
on the presentation server.
d) ALV LIST is Display Only.
Whereas
ALV Grid Can Be made EDITABLE for entry purpose.
e) In alv grid, these options are possible,
but not in alv list.
without horizontal lines
without vertical lines
without cell merging during sorts
display total lines above the entries
I hope it helps.
Regards,
Mamta
Edited by: Mamta Verma on Nov 27, 2008 6:41 AM

What is the difference between handling unit and packaging material

hi
what is the difference between handling unit and packaging material

Hi,
A handling unit is a physical unit that consists of the packaging materials (load carrier / packaging material) and the goods contained therein. A handling unit is always a combination of materials and packaging materials. All the information contained in the material items, such as batches and serial numbers, is always available by way of the handling units.
Packaging materials are intended to enclose or hold together the materials that are to be packed. In other words, the material that is to be packed can be packed into or onto the packaging material. The packaging material can be a load carrier. The most important packaging materials include crates, boxes, containers, wire baskets, and pallets.
Regards,
Naveen

Difference between Item Cost and Last Evaluated Price

Dear All,
What is the difference between Item Cost and Price in Last Evaluated Price List. Exactly when are they updated?
Regards
Sibasish

Hi Sibasish,
The "Last Evaluated Price" is simply a price list but can't have a direct manipulation like other price lists. Its values may not involve in any accounting transactions if it's not selected for the concerned transaction any way.
On the other hand the item cost is the cost which is maintained by SAP B1 (until and unless you select the Standard Valuation Method), and it gets involved in the accounting transactions where inventory is involved. For e.g. the "COGS" is calculated on the basis of this value.
Please close this thread if answered ... or please let us hear something more from you on this...

SCOM-Difference between Problem Count and Event Count in Application Failure Analysis Report

Dear All,
Could someone explain me clearly , the difference between Problem Count and
Event Count in Application Failure Analysis Report. Please help me in understanding What is meant be problem and event in the report .
Thanks in Advance.
Regards,
Rajesh Kumar C

Hello Rajesh,
The "problem" is the logically grouped set of the exception events which have the identical hash calculated over several fields as "Stack", "Source", "Failed Function" and so on... So, even if exceptions are different
in the other properties but hash matches over the considered properties - then all those exceptions go into the same "problem group".
So, event is an instance of the problem. One event contributes to one problem but one problem might have a huge event count if you have a repeating issue.
The logic is similar for the performance analysis report, only fields that go into the "problem" hash are different. e.g. "Stack" is not used in hash for perf events...
Dmitry Matveev

Difference between table CKMLKEPH and transaction figure of CKM3

Hi Gurus,
Having an issue in material ledger transaction and table data.
There is a difference between table CKMLKEPH and transaction figure of CKM3 for couple of periods.
Single level price difference for raw material domestic figure coming in transaction CKM3 is not matching with CKMLKEPH table.
Can you advice the tentative reason of it.
Thanks in advance,
MC.

Hi MC,
MLHELP_CCS_CONS_CHECK which check the actual CCS and the program
MLHELP_SPRICE_CCS_INIT for the standard CCS.
These programs are provided by the ML Helpdesk tool via note 364368.
Although these reports are used by SAP Support you can execute them in
test mode to verify your CCS data.
Regards,Declan

Difference between Free goods and BOM (ERLA)

Hi,
Could any body throw some light on the Difference between Free goods and BOM(ERLA) to clarify my weired thought.
AS of what i know is Free goods is 1:1 ratio.
The main item will be prices and sub item will be free .
Than same thing is also With BOM (ERLA)
Regards,
Venksys

Hi Venksys
Please note as given below :
Free Goods : This function allows you to offer your customers a product free of charge in the form of free goods when a certain quantity of products is ordered. Free goods is a kind of quantity discount, and is granted in the form of a goods delivery that is free of charge when a certain quantity is purchased. There are Two types of free goods :
1.Inclusive : The customer only pays for part of the goods ordered. The rest of the products are provided at no extra cost. For example, a customer orders for 3 bottels but pays for 2 bottels and 1 is supplied free .
2.Exclusive - The customer pays for the goods ordered, and also receives additional products for free. The materials delivered as free goods will not be the same as that of ordered onces. For examples customer orders 5 bottels , but will receive 1 Bottle opener free.
BOM : It consists of 2 or more items combined and sold as an package : Example : Combination of 1 Tooth paste + 1 tooth brush packed as BOM.
The Higher level Material ( BOM) is not relevant for pricing but relevant for picking : The tooth paste and brush is relevant for pricing and also can be sold independently : The Item cat group of the Header BOM material will be ERLA and for Tooth paste and brush material the Item category group will have TAN.
For more details , please refer to the link below:
http://www.sap-img.com/sap-sd/what-is-bom-referring-to-sap-sd.htm
Thanks and regards
Veera
Edited by: veera PV on Jan 24, 2011 9:06 AM

Difference between business area and sales area

Hi
I am swetha i have one doubt
1) what is the buisiness area and what purpose we use the business area
2) what is sales area and what purpose we use the sales area
3)what is the main Difference between business area and sales area.
Regards
Swetha

Hii..
Business Areas in SAP are used to differentiate transactions originating from different points/lines/locations in business. Let me give some examples to elucidiate:-
A company (say, ABC) is a huge company and has a variety of businesses under it. Let us say that it typically operates in 3 different domains like machinery manufacturing, trading and assembling of machine parts.
There are 2 options here now -
1. Either create different company codes for the 3 business operations (which would be the easiest and require no creativity)
or
2.) Create each of these business lines into business areas (the better option).
The advantages of using the second option is:
1. You can use these business areas if other company codes require the same areas
2. The configuration is simpler as in case of company code, you would require to go through the entire configuration of creating Chart of Accounts, Fiscal Year variants, posting periods variants and so on. In the business area option, you just need to attach it to the company code and the rest of the details in Business area is attached by default from the company code you are using it in.
3. Using the options in controlling (EC-PCA, Enterprise Controlling, Profit Centre Accounting), you can even draw up Balance Sheets and PL statements for your business areas and hence this is used for management accounting in some companies (like HP, Dell, etc) when it wants to know the operating profits for different business areas/lines.
The above was an example when the company wanted to separate entries according to the lines it operates in... the other case could be when it wants to find out profitability during its operations in cities and differentiates these cities into Business
Areas...
Business Areas are not much relevant in FI but are much more relevant in CO.
Hope this clears.
What is mySAP SD?
The SAP sales and distribution is part of the logistics module that support your customers, starting from quotations, sales order and all the way towards billing the customer. It is tightly integrated with the MM and PP functional modules. It allows companies to input their customer sales price, check for open orders and forecast etc.
The most important basic functional features in the sd module are:
- Pricing                                           - Availability Check
- Credit Management                       - Material Determination
- Output Determination                     - Text Processing
- Tax Determination                          - Account Determination
Regards,
Aakash

Report on difference between PO price and Material standard price

Similar Messages

Maybe you are looking for