Report on different margins of layout(error)

Respected all,
i made matrix report manually. following message is appearing "rep-1253 report on different margins of layout".
please help me. my whole work is stopped due to this error.
best regards

Just to add - Oracle does support hetrogeneous Primary and Standby systems. Details on metalink note 413484.1
Thanks

Similar Messages

11g Reports Development Environment, Run Web Layout Error

Hi,
I'm using
Operation System: Windows 7 32 bit
Jdk: jdk1.7.0_07
Weblogic Server: 10.3.6
Forms and Reports: 11.1.2 Development Environment.
When I'm trying to run report in web layout, it gives error
java.lang.NoClassDefFoundError:
Javax/servlet/jsp/tagext/TagLibraryInfo
Kindly help me to resolve this error
Thanks
Edited by: Sadiq Ali on Oct 3, 2012 11:08 PM

Hello,
First, JDK 1.7 is not certified with Forms 11gR2. Only JDK 1.6 familly is certified and supported.
It seems to be an environment/installation issue as this installation works fine.
- Are you installing as Admin user and running Builder as the with the same OS user?
- Let me know the WLS 10.3.6 complete zip file name you installed and the command you used to install it. Also the 11.1.2 file names for review
As a workaround:
You can open rwrun.jar in Jdeveloper and check the classpath in the manifest.
I remembered i had an issue on this(11.1.1.3 version) when rwrun.jar called a jar file javax.jsp_1.1.0.0_2-1.jar that did not exist in the installaton(There was a newer version like javax.jsp_1.2.0.0_2-1.jar in the installation).
Normally should not be happening in 11gR2, but give it a try.
Regards,
Alex
If someone's answer is helpful or correct please mark it accordingly.

PDF Printing Issue - Customised Report Layout Error

Hi,
I am trying to get a PDF file output based on the customised RTF file created. I follow the following steps but I am facing an issue with that.
(i) Go to Shared Components > Report Queries.
(ii) Create a new Report query with more than one query.
(iii) Using the XML Data in the Report queries, create a Report Layout (RTF) file.
(iv) Navigate to shared components Report Layout and upload the RTF file.
(v) Once this is done, use the Report Layout created in the Report Queries. Select the Layout name from the Drop Down.
(vi) Click on TEST REPORT, this produces an error: Adobe Reader could not open the <file name> because it is either not a supported file type or because the file has been damaged (for example it was sent as an email attachment and wasn't correctly decoded )
Additional Info
The apex instance configured with Embbedded plsql, rdbms version is 11.1.0.7.0 and the BI publisher version 10.1.3.3.
ISSUE DESC
When I use mulitple Queries even after using Generic Report Layout I get the output for the first query alone in the PDF and the remaining Queries are ignored.
And when i use a user defined template, then even If i have a single report query I get the error.
To summarise, I am not able to use the customised Layouts.
I have reproduced the issue in apex.oracle.com
Please log in using,
WORKSPACE: demo_test
USER NAME: [email protected]
pwd: vidhya
After logging in please select the Application Builder.
In that select the Application named PDF.
Select the Shared components > Report Queries
Select the Report Query named test.
Click on the TEST REPORT button in the Source Queries Section.
You will get the error.
Now in the same page in the Report Query Attributes Section change the Report Layout to Use Generic Report Layout and then click on 'TEST REPORT', this will give the PDF file without errors.
The same report has been called from the PRINT REPORT button provided in the page 1 of the application.
This issue is really urgent and critical. Require your inputs/help.
Thanks,
Ramya

I' an APEX newbie and believe I am having the same or a similar problem. I am (for now) developing a system using the hosted Apex development system online. I have created a Report Query which works fine with the default layout. I downloaded the XML (tried both sample data and schema) into Word 2007 with the BI Publisher Template Builder. I used the table wizard to create a simple layout containing all columns with no customization at all. Saved as an RTF, uploaded to Apex as a Report Layout, associated it with the Report Query, clicked Test Report -- and I got nothing.
When the is a PDF, I get the same error you mention ( Adobe Reader could not open the <file name> because it is either not a supported file type or because the file has been damaged (for example it was sent as an email attachment and wasn't correctly decoded ). If I switch to an HTML file the out is just a blank screen.
If I switch back to generic report layout, it works fine. This suggests there is something wrong with the template, though it looks fine in Word with the sample data.
I've searched the forums and Google for the better part of a day. What am I missing?

Run Web Layout Error 11g R2 Report

Report Builder 11.1.2.0.0
When button pressed on Run Web Layout in Oracle Report Builder then
It's show Error:-
java.lang.NoClassDefFoundError:
javax/servlet/tagext/tagLibraryInfo
Installed proucts are:-
Weblogic Server 10.3.6
SE JDK 6U35 64bit
Oracle 11g R2 (Forms & Reports )
Please give advice

Have you checked out {thread:id=2418100} ?
Cheers,

How to create a report with different page sizes

Hi,
I would like to create a report with different page sizes, it's possible to do it with diadem?
When I change the layout parameters, changes afect to all sheets...
Is there a way to change page size individually for each sheet?
Thanks in advance.
Marc

Hi Marc,
You can use the DocStart and DocEnd commands along with the PicPrint command to spool multiple print commands to the same output PDF file using the direct printer approach. This should enable you to programmatically specify the page size differently for each sheet that you add to the print job.
' Print PDF Page by Page.VBS
OPTION EXPLICIT
Dim i, Path, OldPrintName
Path = AutoActPath & "2D Stacked"
Call DataDelAll
Call DataFileLoad(Path & ".TDM")
PDFFileName = Path & " Page by Page.pdf"
IF FileExist(PDFFileName) THEN Call FileDelete(PDFFileName)
OldPrintName = PrintName
PrintName = "winspool,DIAdem PDF Export,LPT1:" ' Set to PDF printer
PDFResolution = "72 DPI" ' "2400 DPI" , "default"
PDFOptimization = TRUE
PDFFontsEmbedded = FALSE
PDFJPGCompressed = "high"
PrintOrient = "landscape" ' orient paper
Call PrintMaxScale("GRAPH") ' auto-max, see alternative margin setting variables below
PrintLeftMarg = 0.181
PrintTopMarg = 0.181
PrintWidth = 10.67
'PrintHeigth = 7 (read-only)
Call WndShow("REPORT")
Call DocStart ' Begin multi-page document/print job
FOR i = 1 TO 4
Call PicLoad(Path & ".TDR")
Call GraphSheetNGet(1)
Call GraphSheetRename(GraphSheetName, "Page " & i)
Call PicUpdate
Call PicPrint("WinPrint") ' Add a page to be printed
NEXT ' i
Call DocEnd ' End multi-page document/print job
PrintName = OldPrintName
Call ExtProgram(PDFFileName)
Brad Turpin
DIAdem Product Support Engineer
National Instruments

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

How can I print a label on the last page of the report in the margin

I would like to display a label on my report but has to appear only on the last page of the report in the margin area or as a footer. I have tried using the solution below that I came across in this forum. This solution only worked if I put the label as a report trailer and not in the margin of the main section of report. The problem of putting the label as a report trailer is that it will only appear at the end of the report on it's own page, i.e. on a new page. I would like the label to appear at the end of the report, on the last page which has the other report details and not to appear on a new page on its own. Could you please help? Thanks.
1. Create a dummy query, like
select 1 dummy
from dual
2. Create a package spec:
PACKAGE pkg_globals IS
totalPages number(3);
END;
2. Create a repeating frame and field for this dummy at the end of the report layout.
3. Create a format trigger for this frame:
function R_1FormatTrigger return boolean is
begin
SRW.GET_PAGE_NUM(pkg_globals.totalPages);
return (FALSE);
end;
4. Create a format trigger for your margin field:
function F_1FormatTrigger return boolean is
pagenum number;
begin
srw.get_page_num(pagenum);
if pagenum = pkg_globals.totalPages then
return (TRUE);
else
return (false);
end if;
end;

user8655468 wrote:
I would like to display a label on my report but has to appear only on the last page of the report in the margin areaCreate a fixed frame at the bottom of margin area and inside the frame put your label.
set the frame print object on: Last page
Hope this works..

Need to run the report in different languages

Hi All,
i need to run the Bex report in different languages (SAP-BI). to maintain the Language plase give me the tables name.
To maintain Query Description :Table?
To maintain Desription of Key fig and CKF and RKF : Tables
Regards
Srinu

thanks for replying, but i tried this option too, it did not work for me, neither isnull nor coalesce. I mean, the solution work for single value but when i pass multiple values then separated by a comma then it doesn't work and shows me an error like "Incorrect Syntax ','". I am using SQL server as DB and bip is 10.1.3.4.1
also please share the SR number, so i can also check the same.
can there be any other work around to this?
thanks,
ronny

Different margins in the same document

So if I understand this right, the only way to have different margins in different parts of a document is to (a) set the document margins to the smallest ones needed, and then (b) break the document into sections and set the layout for each section to increase the margins to the desired point for that particular section. Right?

Partially.
There are two types of margin. The margin you set with the Document Inspector is global for the whole document. The Layout Margin that you set with the Layout Inspector is relative to that but can't be negative i.e. you can't make it smaller than the document margin as you said.
The bit where you were slightly incorrect is that you can adjust the layout either after a Section Break or after a Layout Break. Layout Breaks don't start on new page like Section Breaks so can be useful sometimes.
I hope that helps.

How do I apply different margins to different section in the same document?

In Pages 5, how do I apply different margins to different section in the same document? there are is no layout break like in Pages 4.

Use the Text Format Pane, Layout Tab, Indents.
You could do the same thing by dragging the margin stops on the Ruler.
Jerry

Different margins in different sections

Is it possible in Pages (iWork '09) to set different margins for different sections? If so, how?

D,
You must first set the Document Margins in the Document Inspector, Document Tab, Document Margins area. This setting is the narrowest margin that you intend to use anywhere in the document.
Then when you add a Layout Break, go to the Layout Inspector, Layout Tab, Layout Margins area and add more margin width with the settings there.
The Document Margins dictate the maximum text width (smallest margins) anywhere in the document. The Layout Margins further narrow the text area on a per-layout-region basis.
Jerry

NVSRUN (nVision-Report) - nVision process going in the error status

NVSRUN (nVision-Report) - nVision process going in the error status for all nVision reports submitted from the web.
All nVision reports submitted online from the web are failing. Need to create new run control ID? How to do that for NVSRUN process?
========================================================================================
Message:
Process Request shows status of 'INITIATED' or 'PROCESSING' but no longer running

Make sure u can open excel from the process scheduler server manually. when excel.exe gets crashed on the server, nvision reports may start to fail on the web. if u have too many excel.exe on the task manager also, u might want to kill the executables by suspending the prcs.
make sure u have the right parameters for the drilldown and layout paths. this also can contribute to the process running to error status.
Need to add the run control id - for a drill down report request u don't need a run control id. for a report book u can always add a run control parameters for every run. u can also differentiate the reports by the business units with your run control ids.
Thanks

Different margin for odd and even pages

Hi there,
I am writing a book which will be printed in 2 sided paper. Therefor I will need different margin (left and right) for the odd and even pages.
How is it possible in Pages? I am using Pages 5.2 (1860).
Thank you.
Sebastian.

Indesign & Xpress are professional DTP applications. They can layout pages in any order you can imagine with custom margins. They are also complex to learn & expensive in comparison to Pages.
There is a trial of Indesign IIRC…
https://www.adobe.com/uk/products/indesign.html
Quark also has a trial too…
http://www.quark.com
I expect there may be cheaper 'layout' software that is capable of arranging facing pages correctly (possibly from a single pages PDF export from Pages), but I just avoid apps like Pages if I need a finer level of output control.

When we create any EVDRE report for any application getting an error

Hi Experts,
When we create any EVDRE report for any application getting an error
EVDRE encountered an error retrieving data from the web server.. We also
tried creating EVDRE report on the APP SET/RATE application still getting the same error. All the cell base reporting are working. We are on the latest patch. the server and the client machine.
1) BPC Version : 7.0 MS (7.0.115.06)
2) SQ L Server 2005 SP3
3) Office 2007 with latest support packs
4) It is happening since the install
5) All users are getting the same error. Tried from two different PCs,
same issue. also tried the Install (ADM id) and also the ids created. All
ids are having this issue.
6) Single Server environment.
Please send reply as soon as possible.
Regards,
Arjun.

Hi,
There are many many SAP notes existing on the same subject.
I would recommend you to go through them. You will potentially find the solution for your problem.
Some examples of SAP notes: 1242648, 1395993, 1453433, 1439155, 1439100.
Hope this will help.
Best Regards,
Patrick

Report on different margins of layout(error)

Similar Messages

Maybe you are looking for