Report on production orders
Guys,
I describe the problem with example.
Header material X. It has sub components Y1(phantom). Y1 has Y2(phantom) below it. Y2 has Y3(Phantom) below it. Y3 has A(inhouse production) and B(External procurement).
When Material X is order in sales order, and MRP is run, how many production orders will be created. Only for X or for Y1,Y2,Y3 separately. Is there any report which will show the link of these production orders at one place or do I need to analyse then one by one in MD04 and link to each other for understanding?
For your info, it is MTO with project stock.
Reg
Sunny
Dear Sunny,
For the phantom assembly the system does not create any planned order and the system creates planned order/purchase req
for the component's of the phantom assembly skipping the phantom assembly.
You can use the reports COOIS or else CO26.
Regards
Mangalraj.S
Similar Messages
-
Report on production order status and shortage report
I want to know standard report on production order status and shortage report. Kindly suggest.
COOIS - Production order information system . In this report you can give system status in selection screen and in report you can get complete status details (both system and user status) .
shortage report - CO24 -
Report for Production orders with name of Customers
Dear Expert,
Kindly suggest to view the production orders with customer numbers for which the sales orders is created.
I tried in MB51 with layout settings but the customer number comes out be blank despite the sales order number is populated for an production order.
Kindly suggst a way or any report in the system to get the corresponding information of production order number and corresponding customer name mentioned in the sales order .
Thanks in advance for your help and inputs..
Best regards,
Nitish jainNitish,
MB51 is a Material Document list. Many production orders exist that have no entries in this report, so it would be an unlikely candidate to be a solution for your requirement..
The standard production order reporting tool is COOIS. The output for MTO orders can be configured to display Sales order and Item and Soldto.
Obviously, displaying even the customer order number in COOIS is impossible in a MTS scenario.
In addition, a user experienced in using SAP Query (SQVI or SQ01/SQ02/SQ03) could also create a production order report without having to know ABAP, by properly linking tables AFKO, AUFK, AFPO (production order data) with VBAK (sales order header data) to get customer number, and KNA1 to get customer name..
If you are not expert in SAP Query, I suggest you discuss this requirement with a local ABAPer.
If you are feeling like educating yourself in the wonders of SAP query, try this doc. Although old, SAP query hasn't changed very much since this document was written.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
Rgds,
DB49
Edited by: Dogboy49 on Apr 20, 2010 10:47 PM -
Report for Production order list
Dear all,
I need your help..
we have two plants in which we divided total qty of customer order for production
now i want a list in which i got the details like which sale order and how much qty we punched in plant one and plant 2
to compare total valve produced for customer
how to find such kind of report..?
which t code is helpfull.
NehaIf you're working with a MTO stg. (eg: 20), then the sales order details will be linked to the production order & you can then use COOIS report by specifying the sales order nos.
But if you're working in a MTS environment, then there will not be a specific link between the Production order & the sales order, so if you have maintained the SO nos. in some field, then you will have to execute the COOIS report & then use the filter option on the field where you've maintained the SO nos. -
Report for production order with actual and target cost for each
Hi
Is there any report that gives me the list of all production orders in a month with its respective actual and target costs?
I can use COOIS to get a list of production orders, then double click on the prod order, then click on goto and then to cost analyis.. but can i avoid going through all this and get a report with the details i need?
thanks in advanceThanks a lot for that.
I'm a little confused with the columns in the report.
Which columns should I keep for my requirement? -
Production Order
Total Target Cost
Total Actual Cost
Total Actual Qty
Total Target Qty
Thanks -
Standard report for production order
Dear all
Is there any standard report with reference to material for all procuction orders ie open,closed etcHi,
COOIS - Production order information system
For Open Prod orders
Enter material number and sys. status CNF tick Excl.
For Closed Prod orders
Enter material number and sys. status CNF, DLV.
Regards,
Sankaran -
I need help in Report for production orders for my customer.
Hi All
I have scenario where plant A needs the following report for Material XXX which has setting as Stock Trnasfer order from Plant B.
Need report withthe following details, Storage Unit number, Material No, Quantity, Planned Order Date in plant A, Date Produced in plant B, Date Received by Plant A.
Please tell me if there is any standard report to take the following details. Scenario is that the header material YYY in Plant A has one material XXX as BOM component. Now this material has setting as Stock transfer from Plant B. On creating a plan order for Header material it will create a Plan order in plant B for component XXX. The above said detail is required for component XXX in plant A.Dear
Did you explore the report in CO46-Order Progress Report based on Sales Order /Material /Production Order
Or COOIS/COHV for your requirement.Here you can get the Planned Order Details and also Production Order Details .
Regards
JH
Edited by: Jiaul Haque on Sep 27, 2010 2:57 PM -
Report for Production order operation
Hi
Is there any standard report which will give the list of production orders which are confirmed upto a particular operation.
For Ex: Lets say routing has operations 0010,0020 and 0030. I want to know which production orders are confirmed upto operation 0020 and not beyond that.
Thanks in advance.
Maruthi RamHi,
Options:
1. Use COOIS.
In the drop down LIST options select Operations. In the Select at Operation Level specify the Syst. Status as CNF & CRTD, click exclude check box, specify the Plant at Select at Header Level & execute the report.
The output will display all operations which are not confirmed or created, now you can set filter on the operation column & get the info you're looking for.
2. Use MCP1 - Check if this report helps.
Hope the above answers your query.
Regards,
Vivek -
Plan v/s actual materail consumption report for production order - urgent
Dear all Hi,
Is there any report or T code from which i can get the plan v/s actual material consumption for a production order or wbs element after completion of order, please suggest / help, the requirement is very urgent.
thanks in advanceHi shaiz,
You can get that in COOIS tcode
Select components again List
then give the plant,Order details
execute
You can find 2 fields reqmn qty(nothing but planned) & qty Withdrawn(Actual consumption) in the report
Hope this hepls
Rgds,
SVP -
Standard Vs Actual Cost report for Production Order
Hi Expert,
I have an requirement that i need report for Standard Cost (CK40N) and Actual cost (261 Movement) for multiple production order or Multiple Material.
Please suggest standard report if available or FS for creating Z Report.
Regards,
PranavHi Pranav
There are Standard reports
Option 1
You can use Product Drilldown reports in KKO0
For this:-
a. Do settings in OKN0 - assign a Cost Comp Structure and Choose Material group = Product Group
b. Run KKRV to collect data and then use KKO0 reports
I have replied this in SCN many times.. You can search here. Just google as "SCN" "Ajay Maheshwari" "OKN0" and you can see some posts answered by me
Option 2
You can use Summarization Hierarchy KKBC_HOE
For this
a. Set up Summ Hierarchy in KKR0.
b. Run KKRC
c. Run KKBC_HOE report
Br Ajay M -
BOM report on Production order
Dear All,
I need to make BOM report as per production order.
Very helpfull for me if any FM for that?
I need also the table where I can get the relation of that.
Can anybody help me?
Thanks in advance.hi
hope it will help you.
Pls reward if help.
REPORT ZMULTIBOM NO STANDARD PAGE HEADING LINE-SIZE 195
LINE-COUNT 60(2) MESSAGE-ID Z1.
TABLES: MBEW, "Material Valuation
MSLB, "Special stocks with vendor
MARA, "Material Master
MAKT, "Material Descriptions
MARD, "Material Master: Storage Location/Batch Segment
MAST, "BOM Header
STKO, "BOM Detail
STPO, "Bom Components
STAS. "BOM Alternative
Text Elements
Plant
SELECT-OPTIONS: S_WERKS FOR MAST-WERKS DEFAULT 'CA',
Material
S_MATNR FOR MAST-MATNR,
Material Type
S_MTART FOR MARA-MTART.
Base Quantity
PARAMETERS: S_BASE TYPE I DEFAULT '1'.
Display up to Level
PARAMETERS: S_LVL TYPE I DEFAULT '99'.
SELECTION-SCREEN SKIP.
Include Vendor Stock
PARAMETERS: X_MSLB AS CHECKBOX.
DATA: W_MATNR LIKE MAPL-MATNR.
DATA: PARENT-MATNR LIKE MAST-MATNR,
CHILD-MATNR LIKE STPO-IDNRK,
CHILD-WERKS LIKE MAST-WERKS,
CHILD-STLAL LIKE MAST-STLAL,
W_MAKTX LIKE MAKT-MAKTX,
W_STD TYPE P DECIMALS 5,
W_MAV TYPE P DECIMALS 5,
W_MENGE TYPE P DECIMALS 3,
W_LEVEL TYPE I,
W_DOT(1),
W_LVL(12),
W_LVL1(12),
W_LVL2(2),
W_COL TYPE I,
W_LFLAG,
W_TTL LIKE MARD-LABST.
DATA: BEGIN OF INT1 OCCURS 50,
LGORT(6),
LABST LIKE MARD-LABST,
END OF INT1.
IF S_BASE EQ 0.
S_BASE = 1.
ENDIF.
append multi level routing
SELECT * FROM MAST WHERE WERKS IN S_WERKS AND
MATNR IN S_MATNR.
SELECT SINGLE * FROM MARA WHERE MATNR = MAST-MATNR AND
MTART IN S_MTART.
IF SY-SUBRC NE 0.
CONTINUE.
ENDIF.
IF MARA-LVORM <> 'X'.
PARENT-MATNR = MAST-MATNR.
CHILD-MATNR = MAST-MATNR.
CHILD-WERKS = MAST-WERKS.
CHILD-STLAL = MAST-STLAL.
SELECT SINGLE * FROM MAKT WHERE MATNR = MAST-MATNR AND
SPRAS = 'E'.
W_MAKTX = MAKT-MAKTX.
REFRESH INT1.
SELECT * FROM MARD WHERE MATNR = MAST-MATNR AND
WERKS = MAST-WERKS AND
LABST NE 0.
MOVE MARD-LGORT TO INT1-LGORT.
MOVE MARD-LABST TO INT1-LABST.
APPEND INT1.
ENDSELECT.
IF X_MSLB EQ 'X'.
SELECT * FROM MSLB WHERE MATNR EQ MAST-MATNR AND
WERKS EQ MAST-WERKS AND
LBLAB NE 0.
MOVE MSLB-LIFNR TO INT1-LGORT.
MOVE MSLB-LBLAB TO INT1-LABST.
APPEND INT1.
ENDSELECT.
ENDIF.
W_LEVEL = 1.
NEW-PAGE.
PERFORM GETCHILD.
ENDIF.
ENDSELECT.
get child parts
FORM GETCHILD.
SELECT * FROM STPO WHERE STLNR = MAST-STLNR
ORDER BY POSNR.
SELECT SINGLE * FROM STKO WHERE STLNR = STPO-STLNR
AND STLAL = MAST-STLAL.
SELECT SINGLE * FROM STAS WHERE STLNR = STPO-STLNR AND
STLKN = STPO-STLKN AND
STLAL = MAST-STLAL.
IF SY-SUBRC EQ 0.
CLEAR: W_DOT, W_LVL, W_LVL1.
PERFORM WRT_DTL.
CHILD-MATNR = STPO-IDNRK.
W_LEVEL = W_LEVEL + 1.
IF W_LEVEL <= S_LVL.
PERFORM SUBCHILD.
ENDIF.
W_LEVEL = W_LEVEL - 1.
ENDIF.
ENDSELECT.
ENDFORM.
get grand children parts
FORM SUBCHILD.
SELECT SINGLE * FROM MAST WHERE MATNR = CHILD-MATNR
AND WERKS = CHILD-WERKS.
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
SELECT * FROM STPO WHERE STLNR = MAST-STLNR
ORDER BY POSNR.
SELECT SINGLE * FROM STKO WHERE STLNR = STPO-STLNR AND
STLAL = MAST-STLAL.
SELECT SINGLE * FROM STAS WHERE STLNR = STPO-STLNR AND
STLKN = STPO-STLKN AND
STLAL = STKO-STLAL.
IF SY-SUBRC EQ 0.
W_DOT = '.'.
PERFORM WRT_DTL.
CHILD-MATNR = STPO-IDNRK.
W_LEVEL = W_LEVEL + 1.
IF W_LEVEL <= S_LVL.
PERFORM SUBCHILD.
ENDIF.
W_LEVEL = W_LEVEL - 1.
SHIFT W_LVL.
ENDIF.
ENDSELECT.
ENDFORM.
TOP-OF-PAGE.
WRITE:/ SY-DATUM,SY-UZEIT,
85 'ABC PTE LTD',
182 'Page', SY-PAGNO.
WRITE: / SY-REPID,
75 'BOM STRUCTURE (WITH LOCATION BALANCES)',
182 SY-UNAME.
SKIP.
CLEAR W_LFLAG.
WRITE:/ 'Material No.:', PARENT-MATNR,
60 'Plant :', MAST-WERKS.
W_COL = 90.
CLEAR W_TTL.
LOOP AT INT1.
IF W_COL > 195.
IF W_LFLAG IS INITIAL.
WRITE:/ 'Description :', W_MAKTX,
60 'Base Qty :', S_BASE LEFT-JUSTIFIED.
W_LFLAG = 'X'.
W_COL = 90.
ELSE.
W_COL = 90.
SKIP.
ENDIF.
ENDIF.
WRITE AT W_COL 'Loc :'.
W_COL = W_COL + 6.
WRITE AT W_COL INT1-LGORT.
W_COL = W_COL + 7.
WRITE AT W_COL(12) INT1-LABST LEFT-JUSTIFIED.
W_COL = W_COL + 16.
W_TTL = W_TTL + INT1-LABST.
ENDLOOP.
IF W_LFLAG IS INITIAL.
WRITE:/ 'Description :', W_MAKTX,
60 'Base Qty :', S_BASE LEFT-JUSTIFIED,
90 'Total :', W_TTL LEFT-JUSTIFIED.
ELSE.
WRITE AT W_COL 'Total :'.
W_COL = W_COL + 8.
WRITE AT W_COL W_TTL LEFT-JUSTIFIED.
ENDIF.
SKIP.
ULINE.
WRITE: /001 'Level',
011 'Item',
017 'Component',
037 'Description',
079 ' Per',
089 'UOM',
094 ' Std Price',
106 'Moving Avg',
119 'Location',
128 ' Balance',
139 'Location',
148 ' Balance',
159 'Location',
168 ' Balance',
179 'Total Quantity'.
ULINE.
FORM WRT_DTL.
CLEAR: MAKT-MAKTX, W_MAV, W_STD.
SELECT SINGLE * FROM MAKT WHERE MATNR = STPO-IDNRK AND
SPRAS = 'E'.
SELECT SINGLE * FROM MBEW WHERE MATNR = STPO-IDNRK AND
BWKEY = MAST-WERKS.
IF SY-SUBRC = 0.
W_MAV = MBEW-VERPR / MBEW-PEINH.
W_STD = MBEW-STPRS / MBEW-PEINH.
ENDIF.
W_MENGE = ( STPO-MENGE / STKO-BMENG ) * S_BASE.
W_LVL2 = W_LEVEL.
CONCATENATE W_DOT W_LVL INTO W_LVL.
CONCATENATE W_LVL W_LVL2 INTO W_LVL1.
WRITE: /001 W_LVL1,
011 STPO-POSNR,
017 STPO-IDNRK,
037 MAKT-MAKTX,
079(8) W_MENGE,
089 STPO-MEINS,
094(10) W_STD,
106(10) W_MAV.
W_COL = 119.
CLEAR W_TTL.
SELECT * FROM MARD WHERE MATNR = STPO-IDNRK AND
WERKS = MAST-WERKS AND
LABST NE 0.
IF W_COL > 166.
W_COL = 119.
WRITE AT /W_COL ' '.
ENDIF.
WRITE AT W_COL MARD-LGORT.
W_COL = W_COL + 5.
WRITE AT W_COL(13) MARD-LABST.
W_COL = W_COL + 15.
W_TTL = W_TTL + MARD-LABST.
ENDSELECT.
IF X_MSLB EQ 'X'.
SELECT * FROM MSLB WHERE MATNR = STPO-IDNRK AND
WERKS = MAST-WERKS AND
LBLAB NE 0.
IF W_COL > 166.
W_COL = 119.
WRITE AT /W_COL ' '.
ENDIF.
WRITE AT W_COL(6) MSLB-LIFNR.
W_COL = W_COL + 6.
WRITE AT W_COL(12) MSLB-LBLAB.
W_COL = W_COL + 14.
W_TTL = W_TTL + MSLB-LBLAB.
ENDSELECT.
ENDIF.
WRITE AT 179(15) W_TTL.
ENDFORM. -
Operation wise Report of production order
Dear Experts,
I am having total 4 operations in production order .I want operation wise report ( For example ,I am having production order of 10 quantity , I want a report through which I can check how much quantity is lying in operation 10 ,20 30 & 40 )
waiting for inputs.
Warm Regards,
Satyahi,
Work Center
CRHD Workcenter Header Data
CRCA Workcenter Capacity Allocation
CRCO Workcenter Cost Center Assignment
CRHH Hierarchy Header
CRHS Hierarchy Structure
CRTX Workcenter Text
KAKO Capacity Header
KAZY Intervals of Capacity
Routing
PLPO Routing Operation Details
PLKO Routing Header Details
MAPL Routing Link to Material
PLAB Relationships - Standard Network
PLAS Task List - Selection of Operations
PLMZ Component Allocation
PLPH CAPP Sub-operations
PLFH PRT Allocation
PLWP Maintenance Package Allocation
PLMK Inspection Characteristics
Bill of Material
STPO BOM Item Details
STPU BOM Sub Items (designators)
STKO BOM Header Details
MAST BOM Group to Material
STZU BOM History Records
STAS BOM Item Selection
STPF BOM Explosion Structure
Thanking you -
Issue for Production Report With Production Order Details and Batch Number
Hi Guys,
I am looking for a batch report.I have tried it but i didnt get the desired results.Pls any body give me some solution.
I need to include the Batch number in this report and when i have done the same the values are repeating and also need to display the Item Description for (Description in Production Order - Parent Item)
SELECT distinct t0.docnum,T0.[DocDate], t4.IssuedQty as 'Consumed Qty', T1.[ItemCode] as 'Circle Codee',T1.[Dscription] as 'Circle Name',t3.itemcode
FROM [dbo].[OIGE] T0
INNER JOIN [dbo].[IGE1] T1 ON T0.DocEntry = T1.DocEntry
LEFT JOIN owor t3 on t1.baseref = t3.docnum
left join wor1 t4 on t3.docentry=t4.docentry
INNER JOIN OITM T5 ON T1.ItemCode = T5.ItemCode
INNER JOIN OITB T6 ON T5.ItmsGrpCod = T6.ItmsGrpCod
INNER JOIN IBT1 T7 ON T5.ItemCode = T7.ItemCode
INNER JOIN OIBT T8 ON T7.BatchNum = T8.Batchnum and T7.ItemCode = T8.itemcode
where t0.docdate between [%0] and [%1] and T6.[ItmsGrpNam] = 'Raw Materials' and t0.JrnlMemo = 'Issue for Production'
Any body provide me some idea for achieving this....
Regards,
Vamsi.Hi Bala.
Thanks for the query but still not acheived the result.
The Scenario is to know the quantity of the Coil (Raw MAterial) used IN making a product in different stages and from which batch and Whse the RawMaterial is Consumed in making of the Product(Production Order Parent Item)
------------- (Issue for Production )-----------------------| Production Order Qty(IssuedQty) Production Order | BatchNum
DocNo/Date | ( RawMaterial/Coil Code/Desription) | (Quantity issued for RM) ItemCode/Description | Batchnum
Regards,
Vamsi..
Edited by: VamsamP on Dec 1, 2010 5:06 PM -
Dear Gurus,
I want to find out production orders against which GI 261 is done after GR 101 in perticular period. ( It should display me dirctly production order list )
Is there any way to find out this as in COOIS documented goods movement I need to search manually .
IshwarIn Documented goods movement report in COOIS
sort on mov type and sort on the posting date and then see thye list of production order
there is no other report...we may have to go for Z report -
Consumption Report for Production order(BOM)
Hi All
Is there any option to see consumption reports for any particular BOM.Hi Richa,
Unfortunately there is no such a report in SBO. But you can write a report to show the consumption of BOMs using the Query Generator or Wizard. (Thus no SDK work is required).
Maybe you are looking for
-
Hi, We have a scenario PROXY(ABAP)->XI->JDBC. The source structure is Partners(occurance n),Line items(occurence n). The target structure is Details(Occurance n). For "n" number of Partners and "m" number of Line items in source we need m*n(i.e, m mu
-
Hi Experts, I want to store certain expenses as commitment through Internal Order. I want to create 5 services for every GL and Internal Order. 1. How to create service and what is higher service no. is it necessary to create . 2. What should be done
-
when I go to my pictures through file explorer I get a mwssage that state files not aacessible access denied >file exp./ documents/my pictures. However I can get to them on one drive as well as the picture app on the app screen. These pictures came f
-
"You need to restart your computer" message keeps appearing
After am done with my computing session, and try to shut down my computer often times, this being the 7th, the machine will not shut down but instead it will display the message "You need to restart your computer...". After i do the restart, a messag
-
Creating Posters/Flyers - Best format to save?
I have created a poster/flyer in photoshop... Saved it as a PSD.... Now i want to save it in illustrator as I want it to be the best qaulity possible. What format should I save the image(s) and whats the best way to go about it? The idea is to use th