Report output displaying displaying as *

Hi Experts,
I searhed all the thread could'nt get a solution ,While displaying the data in BEX, it is displaying as '*' for keyfigures. Though the data is available. I transported this quey from quality to production every thing fine quality system no issues but this problem in production system only i Tried NODIM option issue not solve . In ouput level bex analzer right click k in formula option data displaying but this locally only is displaying i want to this in query designer level .Can any one suggets me on this issue.
Regards.
Rk

You either have a mix of units, currencies or currency types in your columns. It is probably true that you didn't have the same volume/valid data in the Q system versus the P system. You probably don't have any of these as options for filters in your query so to check this go into the Infoprovider for this query and check, using the ListCube tcode, to see what types of data you actually have in the infoprovider. You will probably see that there is a mix of data based on the units or currencies.

Similar Messages

Printing issue of report output list display

Dear All,
I need to print the report output display list. So, for this I have used the following code. But it's not printing.
Will you please check the below code and kindly let me where should I change/modify in the code.
START-OF-SELECTION.
SET PF-STATUS 'ZGUI_STATUS1'.
END-OF-SELECTION.
AT USER-COMMAND.
CASE sy-ucomm.
    WHEN 'PRNT'.
     DATA: l_params TYPE pri_params,
           l_valid TYPE c,
           l_arc_params TYPE arc_params.
     CALL FUNCTION 'GET_PRINT_PARAMETERS'
       EXPORTING
         destination            = l_v_usr01-spld
         copies                 = 1
         list_name              = 'TEST'
         list_text              = 'Test NEW-PAGE PRINT ON'
         immediately            = 'X'
         line_size              = 220
         release                = 'X'
         mode                   = 'CURRENT'
         no_dialog              = 'X'
       IMPORTING
         out_archive_parameters = l_arc_params
         out_parameters         = l_params
         valid                  = l_valid
       EXCEPTIONS
         archive_info_not_found = 1
         invalid_print_params   = 2
         invalid_archive_params = 3
         OTHERS                 = 4.
NEW-PAGE PRINT ON PARAMETERS l_params ARCHIVE PARAMETERS
                          l_arc_params NO DIALOG.
      PERFORM display_data.
      NEW-PAGE PRINT OFF.
ENDCASE.
Many Thanks,
Ranjan

Dear Amit,
The font size is not increasing, in-fact, if I use the code like the below, it's not even printing, I am checking different ways,
DATA: lay   TYPE pri_params-paart,
      lines TYPE pri_params-linct,
      rows TYPE pri_params-linsz.
AT USER-COMMAND.
CASE sy-ucomm.
    WHEN 'PRNT'.
      lay = 'X_60_85'.
      lines = 60.
      rows = 85.
      DATA: l_params TYPE pri_params,
            l_valid TYPE c,
            l_arc_params TYPE arc_params.
      CALL FUNCTION 'GET_PRINT_PARAMETERS'
        EXPORTING
         destination            = l_v_usr01-spld
          destination            = 'LPIN'
          copies                 = 1
          list_name              = 'TEST'
          list_text              = 'Test NEW-PAGE PRINT ON'
          immediately            = 'X'
          layout                 = lay
          line_count             = lines
          line_size              = rows
         line_size              = 220
          release                = 'X'
          mode                   = 'CURRENT'
          no_dialog              = 'X'
        IMPORTING
         out_archive_parameters = l_arc_params
          out_parameters         = l_params
          valid                  = l_valid
        EXCEPTIONS
          archive_info_not_found = 1
          invalid_print_params   = 2
          invalid_archive_params = 3
          OTHERS                 = 4.
      NEW-PAGE PRINT ON   PARAMETERS l_params NO DIALOG.
      PERFORM display_data.
      NEW-PAGE PRINT OFF.
ENDCASE.
Kindly let me know if you have some new answer?
Kind Regards,
Ranjan

RDF Report Output Got Displayed in Special Chars

Team,
RDF report output is getting displayed in special chars.
when i query the data from SQL Developer, the data is displayed fine.
But when the data is displayed in the report the characters(single quotes, double quotes) are not displayed properly, they are displayed in a special char.
why it is happening so . Is it related any font missing ? Plz do let me know.
thanks
sridhar

(single quotes, double quotes) These are probably not really single and double quotes. Check the ASCII value.
drop table ttest;
create table ttest (col1 varchar2(10));
insert into ttest values ('''Quote''');
insert into ttest values ('"Quote"');
select * from ttest;
select dump(col1) from ttest;
Table dropped.
Table created.
1 row created.
1 row created.
COL1
'Quote'
"Quote"
2 rows selected.
DUMP(COL1)
Typ=1 Len=7: 39,81,117,111,116,101,39
Typ=1 Len=7: 34,81,117,111,116,101,34
2 rows selected.

Send report output(alv display) as email to end user

I have developed a report the output of which has to be sent to the end user if he enters his email id in selection screen. The out put is in alv form. Pls can anyone tell me how to send this displayed output as an email attachment using function module SO_NEW_DOCUMENT_ATT_SEND_API1 . I am wondering How this displayed output can be passed as a parameter to this function module.

Thanks Sham..
I am able to send HTML email following above link.
The problem i am facing is,When i am deploying the code through crxde.Code is working fine.
But using maven deploy..Bundle get activated ..But at line:
messageGateway = this.messageGatewayService.getGateway(HtmlEmail.class);
,it gives null Pointer exception.
Any pointer,why its not working from maven deployment.
Regards
Deepika

Report Output not displaying

Hi folks,
I am experiencing a strange problem. I created a master-detail report in the builder that takes a single user defined parameter.
On running the report and entering the requested parameter value, all i get is a report that shows no data at all. All i get is a title.
I thought there was a problem with my parameter value, but further examination showed that was not the case. I then created another report that is similar to the preceding one but which required no parameter. i got the same result.
All other reports created exhibit the same behavior.
Any clues as to what's going on. Only started today.
Thanks a lot.
PS: Report builder keeps crashing. Latest error message was as follows
'instruction at "0x77f58bdd" referenced memory at "0x50207373". the memory could not be "written".
click on OK to terminate the program.'
It's very frustrating. Can anyone help out.
I have a lot of RAM(384MB) and i am running Win XP Professional on a Pentium 1.6GHz PC.
Thanks.

hello,
this sounds like a job for oracle support services. the only thing i can advise you is to upgrade to the latest patchset of whatever version of reports you are on to try to get rid of the crashes.
about the behaviour you describe with the report not showing any output, this is very hard to solve here via the forums as you are basically saying that none of your reports returns any data, which is very strange.
regards,
philipp

Is it possible to can a program (report output) from SAP Script?

Hi,
From SAP Script I would like to call a report output (without displaying the selection screen).
Is this possible. If so, how can I do this?
Thanks.

H i kumar g,
why not?
In script you can call external subroutine. You must define the subroutine in a program, there you can do a SUBMIT or whatever you want.
See online docu for further explanation.
Regards,
Clemens

WBS element field to Depreciation Simulation Report output display

Hi SAP Experts,
We need to Add the WBS element field to Depreciation Simulation Report output display (S_ALR_87012936)
Could please give your valuable inputs
Thanks
Hari Pothula

HI Javed,
We have capitalized with WBS element but not displaying in simulation report.
All configurations done in in ACSET and activation Account assignment objects
Thanks
Hari

Displaying selection criteria in ALV report output

Hello,
Ive been using REUSE_ALV_GRID_DISPLAY function module to display my report content in ALV.
My reports selection criteria has parameters, select options, checkboxes and radio buttons. As part of the ALV output, I want to display the criteria that the user had selected in the selection screen. I was hoping to do that via parameter "i_callback_top_of_page" and fill the selection criteria in the header area. I'm using REUSE_ALV_COMMENTARY_WRITE to fill the header area.
However, the header area takes too much of view space in the output if I put all the selection screen information in it.
Is there a way to make the header area scrollable? What is a good way of displaying the selection criteria information as part of the report output?
Appreciate your help.
ss

Hi SS,
1. The purpose of displaying / writring
   selection information
   in alv is
   for identifying what the user has seleccted,
   directly from the report (when its printed)
2. So, the option of priting/writing
   it on the TOP of alv, is ok.
3. However, U can also choose to WRITE
it at the BOTTOM (instead of top)
4. Try to utilise maximum spacing (horizontally)
   field1 : abcd      fidl2 = xyz field3 = ppp
   field4 : mnc       etc.         etc.
regards,
amit m.

Is it possible to display keyfigures in italics format in report output

Hi All,
Is it possible to display keyfigures in italics and bold format in report output?
Thanks,
Sri Arun Prian

you can edit the CSS - there is a CSS class assigned to the key figures.... this is for WAD....
Edited by: Arun Varadarajan on Feb 5, 2009 2:43 PM

Code page issue - Unix file(s) content display in a report output

Hi All,
I am trying to retrieve file from Unix server and display in my report output.
I have written code as below:
OPEN DATASET filename FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET filename INTO i_tab-line.
ENDDO.
CLOSE DATASET.
1. Now i am able to display files of type .txt in report output but with line numbers above each line.
How can i avaoid it! I want to display as it looks in AL11 view.
2. If i am displaying files of type .PDF it is giving dump with below message:
A character set conversion is not possible.
At the conversion of text from code page '4110' to '4102' is not possible.
- a character was found that cannot be displayed in one of the two code pages;
- or it was detected that this conversion is not supported.
How can i display the .PDF (or) all types of files in my report as it is viewable in AL11.
Can anybody solve this this.
I have tried UTF-8 & NON-UNICODE options with ENCODE also they are also giving same dump.
Can anybody resolve these issues!
Thanks in advance.
Thanks,
Deep.

Hi All,
Any resolution for above posted issue!
Thanks,
Deep.

Display date prompt in crystal report output

Hi There,
In my report output the values entered in date prompt(range) is not displayed.
I've prompt that is created on document created on field. The properties of prompt are
Posting date...... date.........static values
value field : ERDAT.....
value options:
optional prompt: false
allow custom values: true
allow multiple values : false
allow discrete values: false
allow range values: true

Hi Raj,
I believe you're trying to display the start date and the end date of the date range parameter.
Create a formula called 'start':
Minimum(?Postingdate) //This formula extracts the start date from the date parameter
Similarly, create another formula called 'end':
Maximum(?Postingdate) //This extracts the end date
Place these formulae on the desired report section.
P.S: You may even do this in a single formula.
Hope this helps!
-Abhilash

Oracle Report, How to Display Polish Characters in a PDF Output

Environment :
Oracle Application Server version 10.1.2.0.2 on Red Hat 4 Enterprise (Kernel 2.6.9-42.0.3 , 32 bit) Oracle Database Version 10.2.0.3.0 Our character set of database is UTF8
I have trouble to display polish characters in Reports Output. We develop on Windows XP machines. I can see the Polish Caharacters in the Reports Builder using several fonts (arial, arial unicode, Times new roman, verdana...) during design time or when running with the paper layout. But when the report deployed to application server running on the linux, the polish characters are replaced by symbols.
Even under Windows, when I select 'generate to a PDF' file option, the characters are not displayed correctly (When I open the generated PDF file with Acrobat reader and go to Document Properties / Fonts, I see the Fonts are always replaced with Adobe Sans MM)
Using the Forms Applications running on the same application server we have no trouble dealing/displaying with the characters (Ąą ĆćĘę Ł ł ŃńÓóŚ ś Ź ź Ż ż ß Đ đ € )
NLS_LANG setting is AMERICAN_AMERICA.UTF8 on the Linux Box and AMERICAN_AMERICA.WE8MSWIN1250 is on the Development machines. (have tried a number of different NLS_LANG settings on the development box as well with no luck).
Any direction would be appreciated.

Hi,
You have several different approaches to fix this problem. First of all, you would be able to generate the PDF output with Font Subsetting setup and be able to see the Polish characters correctly when running the output with destype=cache&desformat=pdf. The following metalink documents would guide you with this setup :
Note.207711.1 "How to Use Font Subsetting in Reports 9i and 10g for PDF Output"
As at design time you use many different Windows specific fonts, I also advice you to check the following document :
Note.356221.1 "A Practical Methodology on Porting Reports from Windows to Unix with Different Fonts"
Once the PDF output is generated properly with correct characters, then if you need to use "destype=printer" for direct print, rather than "destype=cache" to display the output in browser, then you can use the "PDFPrint" pluggable destination, which is located in :
http://www.oracle.com/technology/products/reports/pluginxchange/index.html
Regards,
-Bulent

Problem In report output display when i run in the background

Hi,
In a classical report i am printing around 17 fields the width of the report out put is around 800 characters.
If i run the report in the fore ground it running perfectly. But the thing is when i give large selection is it GETTING ' TIMED OUT ' as it is running more than an Hour.
so i wanted to run it in the back ground to avoid TIME OUT problems.
But when i run in the backgroud i am not getting full out put in the SPOOL request(SIZE of the report output may causing the problem) .
Pls come up with some solutions
Thanks in advance

Try increasing the spool length..
Refer this link for doing so.
Spool List output display > 255 char when the rpt is run in Background
Thanks
mahesh

How create header with user id time date to VC-report's output as display ?

How create header with user id time date to VC-report's output as display ?
This info should come from the VC - not all the way from R3-side via FunctionModule/BABI. So only userid, date, time to output as normal text (which is not editable of course). Thanks =)

Hi ann-mari
Go through following link may it help u
Form Item disabled based on portal role
/people/community.user/blog/2007/01/17/visual-composer-explorations-using-portal-roles-to-influence-ui-element-behavior
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/usingrolestoinfluenceapplication&
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/passingvaluesvia+URL&
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad182ac7-0a01-0010-4fb8-8a4d217b19c1
Best Regards
````Satish````

XML report output displays xml code instead of pdf

Hi,
My Release is R12.1.1, An xml report whose output is set as pdf. when running this report output is coming as xml code instead of pdf
another xml report ouput is coming in word instead of pdf
is there any additional settings required to display in pdf format
eventhough i configured pasta.csg & ixlib.cfg files
Thanks,
Alig
Edited by: user12257829 on Jun 2, 2010 11:41 PM
Edited by: user12257829 on Jun 2, 2010 11:41 PM

Hi,
Helios
Even i tried both MOS documents u have referenced, as both reports compeleting normally without any error
one thing i want to know can application use the same pasta.cfg file for pdf and text format
as i have a single pasta.cfg configured
Thanks
Alig
Edited by: user12257829 on Jun 3, 2010 1:18 AM
Edited by: user12257829 on Jun 3, 2010 1:18 AM

Font not displaying on Reports Output (RHEL 5) for 10g

Hi, I know I've posted a question in the past about a font not displaying on Report Output for my Arial, Arial Narrow, and Courier New fonts. I worked with Oracle Support and found that Metalink Note#261879.1 fixed my problem with those 3 fonts. I ran the scripts and now that part works great.
However, I have one font "ARIALUNI.TTF" that will not work. This is out specific barcode font we use. I've pushed it on Linux from my Windows by pushing it as a binary file to the ORACLE_HOME/guicommon/tk/admin/TTF directory. I even put it in the directory for TTF on Metalink Notoe 261829.1 and let it create the files, but it still doesn't find it when I ran a report that uses this font.
I tried using font subsetting via the uiprint.ali and make a reference but it still doesn't seem to work.
Is there something I'm missing that would cause any of these not to work. I thought maybe some files had to be created under the guicommon/tk/admin/AFM file directory but I'm not sure.
I just want to have my 2 or 3 reports that use this barcode to work. Once I get them, I'm done and all my font issues are resolved. Any help is appreciated.
Chris

They are probably a very old Type 1 font. Try checking the dates on the font files. Your best bet would be to get the OpenType versions of those fonts and install them.

Report output displaying displaying as *

Similar Messages

Maybe you are looking for