Report painter font

Dear sirs,
can you please help me solve a customer requirement: to change the font that is used in our report painter reports. Can this be done? If yes, how can this be done? And who will be affected by the change? Is that user specific, report specific, report group specific setup?
Thank you, Otto

No solution ever found.

Similar Messages

Report Painter Fonts & Formats

I have created some report painter reports, but cant find any way of changing the fonts that the results are displayed in?
Does report painter only allow one font to be used?
Thanks

是这样的，其实一般的报表可以不用去取report painter的结果，只需要直接取数据库表即可，但有些report painter做出
来的报表逻辑较复杂，而且顾问考虑到其它各种各样的因素，如果直接去取表，逻辑将会很复杂，很麻烦，而且今后
对数是个问题，所以就决定直接去拿report painter生成的报表，请帮忙想想法，谢谢。

Change font size and layout of reports in Report painter

Hi,
I want to change the print layout and the fonts of reports created in Report Painter.
In the print output i am getting 40% of the total screen
My requirement is to increase the font size and the print layout to fullscreen so that the report layout fits to the page.
Kindly help.
Parin

Hi,
Well i generate a report which has two three columns.....
1) Description
2) Column 1 for fiscal year 2009
3) Column 2 for fiscal year 2008 for comparison
Here after these columns we have unformated space as a column.
Now we tried to hide this column but the system is not allowing to hide this.
How can we remove this unformatted column/space from the print output.
Thanking you,
Parin

Need help in Report Painter

Can anybody help me in Report Painter? I need a link.
Regards,
Subhasish

Please go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
I have a standard report and it uses a structure to pull the data for the report. I need to create a custom report which uses the same structure, selection screen but a different layout. Could any of u plz advice, if its doable in report painter or just plain abap program?? Also I am interested to know how the report painter stores the actual report?? as ABAP program?? Please help..urgent..
check the SAP help ..
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
I had made couple of SD reports in report painter 4 year ago .. as far as process is concern you have create library , but it deals with information structure which start with s0* , after defining information structure in library it take to select the fields and display them on your out put . information structure have the statistical data most of the time . As i worked on information structure , so31,32,33 .....
I t creates ABAP program like ABAP query creates in background . if you execute Customer Over due analysis or in Co02 cost analysis report or MC* ( MM stock reports ) those are in report painter .
Hope this'll give you some guide line ...
As far as I know about report painter, It create a report in background..Like when you make ABAP query (SQ01, 02, 03 ) .. It will create a report. You cant modify the report . You have to get OSS id in order to do that. if you're ready do it then you can pass it to Memory and can achieve your goal ...
I think it will give you some hint. I wish I could have authorization to use report painter on my this project so I can help you out practically.
Please see these steps , it`ll help you ...
http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp
The variation objects are coming from the sets.
For example, when you read the report 'Cost Centers: Actual/Plan/Variance'(T-code : S_ALR_87013611), you can find the characteristic 'Cost Center' is set as a 'set variable'. So the cost center in the report left side are coming from the cost center group that you input.
Does any know if we could use Report Painter across two controlling areas? Any documentation available will be great. Yes. When setting up a report in CCA you can have multiple controlling areas. In the General data selection you will have the option for the CA as a selection.
You can also use standard references objects to construct your own reports: libraries, standard layouts, default columns, and row and column models, all in the standard R/3 System, are available for custom reports.
Report Painter report definition requires several Preparatory Steps, depending on the complexity of the report to be generated.
1) Create a library and pick your reporting tables.
2) Create your report
3) define your set up within the report
a)General data selections
b)Colimns
c) rows
d) formulas
Standard layouts are maintained in the IMG "Financial Accounting" under "Special Ledger -> Information System -> Maintain standard layout.
Create libraries, which means assigning the
characteristics
key figures
Predefined columns
For each of these categories you need to select the objects to be used in reports of the specific library. You define the sequence of the objects in the selection lists of the Report Painter in field "Position". Frequently used objects should be at the top of the list.
go to
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22ba743c611d182b30000e829fbfe/frameset.htm
I have created a report through report writer/Painter(GR51). My query here is to link this report to a transaction code. Could you please suggest me how can I acheive this?
Go to SE93 and select the Transaction with Parameters ( Parameter Transaction)
Then in the Transaction field give: START_REPORT
Skip initial screen
Screen 0
In the default value for the parameters give
D_SREPOVARI-REPORTTYPE RW
D_SREPOVARI-REPORT ( Give your Report Group )
If you have any doubt pick any report painter tcode and check in SE93
Follow below steps
1) Execute report through report painter
2) From system status get the program name
3 ) go to se93 and select report transaction and assign
program name .
Is it possible to make bigger the text a I have on a text field?, Im using the screen painter and I need to put the title bigger (as a requirment).
You can define your text as any length.If you are talking about the font,i am afraid you cannot do that.
No, you can not change the size(font) of the text on the dynpro, you can hightlight it, which changes the color to "blue" to make it stand out. You can change this on the attributes tab when double-clicking on the element in screen painter.
what is the sentence that open a screen painter file
Don´t really understand what you mean with "open a screen painter file".
If you are speaking about showing a form generated with the screen painter,
Dim oXMLDoc As New MSXML2.DOMDocument
oXMLDoc.load("Form.xml")
SBO_Application.LoadBatchActions(oXMLDoc.xml)
Dim oForm As SAPbouiCOM.Form
oForm = SBO_Application.Forms.Item("YourFormID")
oForm.Visible = True
regards
vinod

Change color on Report Painter

Dear gurus.
Pls give idear about Report painter.
Now I am making comparson report between planned data and
actual data on report painter in order to check variance between them.
Column1: Planned data
Column2: Actual data
Column3: Variance between Column1 and 2
Then, I want to change the font color of Column3 only in
case that the variance over the criteria such as 10,000 $.
Do you know how to do it on report painter?
I don't care whether "Change color" or "make font Bold" or "Font blinking".
My purpose is to give warning to report's readers which record
they have to read carefully.
BR
yoshitada

Dear Sadashivan
Thanks for your info.
I tried the way you mentioned.
However, the thing I want to do is not to change the font color of specified column.
The thing I want to do is to setup the threshhold such as percentage or amount
and emphasize the data which over the threshhold by changing the color
automatically.
Thanks anyway.
BR
Yoshitada

Report Painter Formatting

Guys,
I have designed a profit center report using library 0FL in report painter.its working fine, but I have problem in formatting.I wanted to make the lines appear in BOLD font.I tried "color for emphasis".it didn't work,then I checked color for totals,so totals are coming up in bold.Is there any way to make the data appear in BOLD font for every line.Thanks
Regards
Shaun

Andrew,
But I saw when you select "color for Totals" its coming up in bold font.but if you just select "color for emphasis".its not doing anything.All the lines appear in regular font.Thanks
Regards
Shaun

GRR1- Report painter

hi,
I have developed a report from report painter by using T Code GRR1. when i open the report in expert mode in excel format it automatically select one Font and Font Size, now client does not want to print this report in this font size as with this font user could not print the report directly.
is there any solution for this requirement in SAP?
Regards,

Hi,
If you have release 4.7, then make sure that the note 635715 is implemented.
Regards,
Greta

Logical Formulae in Report Painter

Hi,
How do we insert a logical formula in a report painter.
For instance, "IF-THEN-ELSE".
Your early replies would be appreciated..

You would create a formula column in reports or formula variables to use in columns.
More details on link's below:
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22c6243c611d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22ea043c611d182b30000e829fbfe/frameset.htm
Best Regards,
Daniel Scoz.

Error in generating a report group in Report Painter

Hi,
I created a report in SAP report painter using transaction code GRR2. I attached the report to an existing group ( 15 reports already in the group), when I generate the group in transaction code GR55 thereu2019s an error message u201CSyntax error in GP40V42F6QG4OQVI4Q93F6FE3QK500, row 97,644 (-> long text)u201D. Please help me on this error.
Thanks,
Louie

There's no error when I generate the same report in a new created group as well as when I generate the existting report group without the new created report.
Information on where terminated
    The termination occurred in the ABAP program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
     in "FILL_RANGES_FROM_SET".
    The main program was "GP40V42ERDE7HBU91TXFAHVA6B0500 ".
    The termination occurred in line 92457 of the source code of the (Include)
     program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
    of the source code of program "GP40V42F6QG4OQVI4Q93F6FE3QK500" (when calling
     the editor 924570).
Louie

Creation of report with the help of report painter

Dear Experts,
I need report painter material, if any body have pls farward to me.
my intension to create controlling report with the help of report painter.
I am ready to award full points.
Thanks in advance
Regards
avudaiappan
Moderator - Please read this:
/thread/931177 [original link is broken]
Thread locked

Hello Chinasammy,
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
=============================================
Below mentioned is the process for creating reports using Report Painter as a tool.
Selecting and maintaining a library for your report: As the transfer structure to Report Painter you use a report table, which is defaulted by SAP and can not be maintained. This table contains characteristics, key figures and predefined columns. In a library, you collect the characteristics, key figures, and predefined columns from the report table, which you need for your Report Painter reports.
When you define a Report Painter report, you assign it to a library. Reports assigned to one library can only use the characteristics, key figures, and predefined columns selected for that library.
When you create or maintain a library, the Position field determines the sequence in which the characteristics, key figures or (predefined) key figures appear in the Report Painter selection lists when you define a report. This allows you to position the objects that you use regularly in your reports at the beginning of the selection lists. If you do not make an entry in the Position field, you will not be able to use this object in Report Painter reports.
You can use either the standard SAP libraries for your reports or define your own.
(ii) Selecting or maintaining a standard layout for your report: Standard layouts determine report layout features and the format of your report data.If the SAP standard layouts do not meet your reporting requirements, you can create a new standard layout or change an existing one.
(iii) Defining row and column models: A model is a one-dimensional, predefined reporting structure that you can insert in either the rows or columns of your report.If you often use the same or similar row or column definitions in your reports, it is recommended that you create row or column models.
You must define the row and/or column models that you want to include in your report definition before you define the report.
You can also use the standard column models supplied by SAP.
(iv) Defining the report: Defining a Report Painter report involves the following steps.
(a) Define the report columns: You define the report columns using the characteristics, key figures, and predefined columns selected for the library that the report uses. Alternatively, you can use a column model for column definition. Column models are predefined column structures which you insert into your entire column definition, instead of defining each individual column.
(b) Define the report rows: You define the report rows using the characteristics selected for the library selected for the report.
Alternatively, you can use a row model for your row definition. Row models serve the same purpose as column models, but are used to define a report row.
Edit and format the report rows and columns in line with your requirements. (For example, you can hide rows or columns, define the column width or define colors for your report rows).
(iii)Define general data selection criteria for the selection of your report data: Selection criteria are the characteristics used to select data for the entire report. You cannot enter characteristics as data selection criteria if they are already being used in the report rows or columns.
(iv) Assigning the report to a report group: Once you have defined a report, you must assign it to a report group. A report group can contain one or more reports from the same library. However, reports that share the same data will select data more quickly and improve processing time.
Hopw this helps you. Please let me know if you need anything more and assign points.
Rgds
Manish

Changing header in report painter

Hi All,
I have a requirement to change the header(column). I am using the global variable &5PY(Period/Year) in the characterictics value. So it displays an output like 06.2008. But the client needs this to be displayed as June 2008.
Kindly help me out with this.
Regards,
Karthik

In report painter you can select variouselements based on which the data will be pulled. I haven't seen any report painter with two header lines and don't think report painter allows that. But for your requirement I believe you can select the periods in the header line itself.

Add element in Report Painter

Hi All,
I am trying a add an element (to the individual/lowest level) in my existing report in 'GRR2'.
If I do not explode, element is created as below image,
If I explode, element is shifted to final level as below image,
But I want the element to be present at the lowest level as below,
* 1990
Note: The test '1990' will be replaced with the actual account name...
Expert advice is appreciated...
Thanks
Rajesh P

hi
Report painter
the below Pdf should help you
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://help.sap.com/erp2005_ehp_03/helpdata/EN/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/eb/1377e443c411d1896f0000e8322d00/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
nagesh

Planned values in report painter

Hello,
Does anybody knows if it is possible to extract planned values (planned through transaction code FSE5N) into a report built through report painter tool?
My report is comming out with "0" values even though I have selected plan version and Plan/Act. indicator.
Appreciate any help!
Paula Rocha

Hi Stacey.
I have just tried, and no changes... Still have "0" values...

Index Currency in Report Painter

Hi,
Is there any way I could include the Index Currency as a key figure for my Report Painter reports?

Hi,
Before running the repport go to envoriment / option and expert mode.
Now you get extra buttons select currency translation. Here you can select what you want. You can create variant from this
Paul

Lead Columns in Report Painter

Hi All
Is it possible to have two lead columns in a report? My requirement is that i want to prepare a profit and loss account by using report painter. It should look like
Expense           Amount           Revenue          Amount
Exp G/L A/c       XXX             Sale G/L A/c      XXX          (For Example)
Now i want to define Expense column as lead column and revenue column as a lead column
Kindly help me with issue
Regards
Invin

Hi Abhijit
Kindly elaborate it I am new to report painter i would like to tell you again what is my specific design requirement
LEAD Column                Column 1                              LEAD Column                    Column 2
Expense                      Amount                                     Revenue                      Amount
(These four will be my columns under this following will be )
Salary Exp G/L       1000                                 Sale G/L A/c       2000 (For Example)
(This salary will be my heading and i will be typing in words and under this i will be assigning my salary Gl A/c same will be the case with Sale)
Now i want to define Expense column as lead column and revenue column as a lead column so that i can write Salary as heading and sales as heading just like traditional Profit and loss account what earlier we use to prepare by hand.
Kindly elaborate it how to do it
Regards
Invin
Edited by: sapcofi on Oct 6, 2009 1:37 PM

Report painter font

Similar Messages

Maybe you are looking for