Report Painter - how to insert sub header rows with no values

In a report painter, I am designing a report with several rows with formulas. I need to insert a sub-header row in the middle of the rows. That will not have a value. It shall contain no value, but I am given only options of either insert a row of characteristics or a formula. I need neither of them. Can we have something excel like feature in report painter (4.6c) just to insert a sub header row? If so how do we get that.
e.g
ADMINISTRATIVE EXPENSES (how to insert this row?)
Account 1 - 10

Hi,
try to add a formular row containing a formular like = +x -x.
Maybe you can use "formatting / row" and use overscores / underscores to get a blank row (underscore one line, overscore the line thats following).
No other idea...
best regards, Christian

Similar Messages

How to create the new row with existing values

Hi all,
first of all i create a row,
i opened that in edit mode,
suppose i want to edit any one of the value in that recordd,
that time compulsory create a new row with those valuess.
how can i create a new row with those valuess.

Hi Anusha,
This code correct for your requirement, only thing is you are not able to modify it as per your requirement.
What you have to do is:
1. Copy queried row into into new row, change primary key values(but don't commit your changes here).
2. Now you have two rows in your VO(OLD as well as New)
3. Make any changes if you want using User Interface.
4. At the save button first compare OLD and NEW row, if any value is differing then commit the chnages(it will insert new row in corresponding database table), if no changes are there I mean to say OLD value and NEW rows are same then rollback(it will remove copied row from VO and no row will be inserted in database.)
While comparing rows please note that Primary keys will not be same so don't compare Primary keys while comparing rows.
I hope it will help you.
Regards,
Reetesh Sharma

How use replace all grid row with variable value

hi master
sir i have master detail form
in detail form i have 5 column grid thate have 25 row at time
one column name id
such as id have value 23
but i want replace all id row with 555
how i replace all id in grid with 555 befor commit_form
how i use loop for grid
or any other method
please give me idea
thank's
aamir

Go_Block('Detail');
First_Record;
Loop
:detail.item := '...' ;
Exit when :system.last_Record = 'TRUE' ;
Next_record;
End loop;
First_Record ;Francois

How to skip the header rows of the file using UTL_FILE?

Hi,
I created a procedure to read the file from shared location using UTl_FILE package. But, I stucked why because I don't know how to skip the header rows as those rows are headings for one of the report.Since, please help me.
Regards,
Vissu.....

vissu wrote:
Hi,
I created a procedure to read the file from shared location using UTl_FILE package. But, I stucked why because I don't know how to skip the header rows as those rows are headings for one of the report.Since, please help me.
Regards,
Vissu.....UTL_FILE just reads data from the file. It has no concept of what could be a "header" or "body" or "records" or "footer" or any other data based concept. If you want to skip lines of a file, you will just need to read them using UTL_FILE and ignore them.

Report Painter: How to change the order of lines in selection screen

Dear Gurus on Report Painter,
how can I change the order of the lines (where the values for the variable selection of my cost center report are entered) in the selection screen of a report painter report? The Selection screen looks awful.
Is there also a possibility to add another description to each line of the selection screen?
Thank you very much for your advice.
Best regards Timo

I am afraid you have much choice in choosing the order of the selection parameters. However, with the developer's access you may.
This is how!
Step 1: If it is a standard report, copy to your own report. and assign it to a report group. and execute.
Step 2: When you execute, and the selection appears, go to systems>status and here , copy the program name (it may look something like GP46LP6VEDORBSA2IHWYSR4TL58020)
Step3: Go to SE38 and enter the above derived program name with a view to re-arrange the line withing the program, with reference to selection parameters.
For example: I have a selection screen in the following order:
Controlling area
Fiscal Year
From period
To period
Plan version
Cost center group
Or value(s)
Cost element group
Or value(s)
The corresponding program that drives this order is in the program and would look like this,
SELECTION-SCREEN BEGIN OF BLOCK VALUE_SELECTION
 WITH FRAME TITLE TEXT-003.
 PARAMETERS: $1KOKRE LIKE CCR1S-KOKRS .
PARAMETERS: %1KOKRE LIKE CCR1S-KOKRS MODIF ID IN4.
 for controlling area
PARAMETERS: $1GJAHR LIKE COSP-GJAHR .
PARAMETERS: %1GJAHR LIKE COSP-GJAHR MODIF ID IN4.
 for fiscal year
PARAMETERS: $1PERIV LIKE COSP-PERBL .
PARAMETERS: %1PERIV LIKE COSP-PERBL MODIF ID IN4.
 for period from
PARAMETERS: $1PERIB LIKE COSP-PERBL .
PARAMETERS: %1PERIB LIKE COSP-PERBL MODIF ID IN4.
 for period to
etc.
PARAMETERS: $1VERP LIKE COSP-VERSN .
PARAMETERS: %1VERP LIKE COSP-VERSN MODIF ID IN4.
PARAMETERS: $1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4 .
PARAMETERS: %1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4.
SELECTION-SCREEN END OF BLOCK VALUE_SELECTION.
......... set variables ..............................................
SELECTION-SCREEN BEGIN OF BLOCK SET_SELECTION
 WITH FRAME TITLE TEXT-004.
PARAMETERS: $1KOSET LIKE RKSB1-KSGRU.
PARAMETERS: %1KOSET LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KOSET FOR CCR1S-KOSTL .
PARAMETERS: $1KSTAR LIKE RKSB1-KAGRU.
PARAMETERS: %1KSTAR LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KSTAR FOR CCR1Z-KSTAR .
SELECTION-SCREEN END OF BLOCK SET_SELECTION.
If you want fiscal year to appear first, you try just copying the coding relating to fiscal year just above the coding for Controlling area.
Extend the same logic for what you may want to get.

How to insert a new row in the middle of an set of rows

Hi
How to insert a new row in the middle of an set of rows ? and How to Reset the line id after the new row added ?
Regards,
Sudhir B.

Hai,
just try this,
Instead of using omatrix.Addrow(1,-1) use like
omatrix.AddRow( RowCount , Position)
RowCount
The number of rows to add (default is 1)
Position
The position of the new rows (0-based; default is -1, meaning append row to the end)
After adding rows in matrix For, sno.
for i=1 to omatrix.visualrowcount
otext=omatrix.getcellspecific("columnid",i) '--where columnid is the unique id of the sno column
otext.value=i
next i
Hope this helps you.
Thanks & Regards,
Parvatha Solai.N

How to insert a new Row in a table? - Need help

Hi everyone,
I'm using JDeveloper 10.1.2, UIX pages and STRUTS.
This is my situation: When I navigate from page one to page two, I have in my page2 one table and I need to create a new row with some values by default, but I don't want to commit this line except the user decides to complete this line.
Can anyone help me? This is very important.
Thanks,
Atena

Hi Sascha,
thanks very much for your replay.
My project changed and I have another question about this. My page1 has a table (table1) and when I select one line from table1 and press a button, I go to page 2.
I have an action in the Struts-Config.xml like this in page2 (S2PopUpObstaculos):
<action path="/S2PopUpObstaculos" type="oracle.jheadstart.controller.strutsadf.action.JhsDataActionSaveObstaculos" className="oracle.jheadstart.controller.strutsadf.action.JhsDataActionMapping" parameter="/WEB-INF/page/S2PopUpObstaculos.uix" name="DataForm">
<set-property property="modelReference" value="S2AltaSociais2UIModel"/>
<set-property property="bindParams" value="S2DominiosLevel1Iterator=${data.S2AltaSociais2UIModel.Obstaculo},${data.S2AltaSociais2UIModel.AlsEpsPsId},${data.S2AltaSociais2UIModel.AlsEpsId},${data.S2AltaSociais2UIModel.Obstaculo}"/>
</action>
But now, the problem is, if I don't select one Row from table1 and press the button to go to page2, I need to pass diferent parameters to page 2, like this:
<set-property property="bindParams" value="S2DominiosLevel1Iterator=0,${data.S2AltaSociais2UIModel.AlsEpsPsId},${data.S2AltaSociais2UIModel.AlsEpsId},0"/>
</action>
Do you have any ideia how to do this? Can you help me?
Thanks,
Atena

How to get a unique row in a value set

How to get a unique row in a value set which is used in concurrent program.
Example if a table contains 10 unique rows i need only one row to show.
Thanks

add conditions in where clause to supress the duplicate values.
On how to supress the duplicate values follow the link
http://oracleschools.com/index.php?topic=40.msg76#msg76
Thanks
Prudhvi
www.erpschools.com

How to merge rows with similar values in alv grid display in webdynpro

Hi experts,
i want to know about how to merge rows with similar values in alv grid display of webdynpro.grouping rows is possible in table display in webdynpro but i am not able to do row grouping in the alv grid display in webdynpro.
kindly suggest.
thanks ,
Anita.

Hi Anita,
did you find a solution for this? I have opened a Thread, if you know the answer maybe you could help me out:
Is there an ALV function similar to the TABLE Row grouping?
Thanx in advanced!!!
Kind Regards,
Gerardo J

How to reject external table rows with some blank columns

How to reject external table rows with some blank columns
I have an external table and I would like to reject rows when a number of fields are empty. Here are the details.
CREATE TABLE EXTTAB (
ID NUMBER(10),
TSTAMP DATE,
C1 NUMBER(5,0),
C2 DATE,
C3 FLOAT(126)
ORGANIZATION EXTERNAL (
TYPE ORACLE_LOADER
DEFAULT DIRECTORY EXT_DAT_DIR
ACCESS PARAMETERS (
RECORDS DELIMITED BY NEWLINE
LOAD WHEN (NOT (c1 = BLANKS AND c2 = BLANKS AND c3 = BLANKS))
LOGFILE EXT_LOG_DIR:'exttab.log'
BADFILE EXT_BAD_DIR:'exttab.bad'
DISCARDFILE EXT_BAD_DIR:'exttab.dsc'
FIELDS TERMINATED BY "|"
LRTRIM
MISSING FIELD VALUES ARE NULL
REJECT ROWS WITH ALL NULL
FIELDS (
ID,
TSTAMP DATE 'YYYYMMDDHH24MISS',
C1,
C2 DATE 'YYYYMMDDHH24MISS',
C3
) LOCATION ('dummy.dat')
REJECT LIMIT UNLIMITED
So, as you can see from the LOAD WHEN clause, I'd like to reject rows when C1, C2 and C3 are empty.
The above statement works fine and creates the table. However when I am trying to load data using it, the following error is produced:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-00554: error encountered while parsing access parameters
KUP-01005: syntax error: found "not": expecting one of: "double-quoted-string, identifier, (, number, single-quoted-string"
KUP-01007: at line 1 column 41
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1
It seems that external tables driver does not understand the "NOT (...)" condition. Could anyone suggest how I can achieve what I want in a different way?
Thank you.
Denis

Another method would be to simply remove the "LOAD WHEN condition" and create a view on the external table which filters the data.
CREATE EXTTAB_VIEW AS
SELECT * FROM EXTTAB
WHERE not (c1 is null and c2 is null and c3 is null);

How to handle the current row with radio button selection???

Hi Everyone,
I have one ADF page with one table and one "Find" button.
I have created one new attribute with VARCHAR2(1) in the VO and dragged that attribute as first column in the table. And changed that first column to Radio Button to select only one row at a time.
Upon clicking on the "Find" button i need to get the values of current selected row.
How can i get the values of selected row?
What code should i write to get the values of selected row in Method Binding of "Find" button?
Any suggestions will be really useful.
Thanks.

Hello Kumar,
I have some comments on your case.
>
I have created one new attribute with VARCHAR2(1) in the VO
>
1- You should create this attribute in the Entity object and then add it to the view object.
2- Do you need that only one radio button is set at a time for all rows ? If yes then you need to handle the case when the user set more than one row and clear the value of the attribute for all other rows.
>
How can i get all the values of current row in backing bean method(method binding of Find method)?
can u plz provide me the code for that?
>
If you mean by the current row is that the row with its value of the selected attribute is set (the radio button is set for that row), then you can write a method in the viewObjectImpl class and expose it to client interface and call it from your bean.
here is an example based in Department table in HR schema.
//This method is written in DepartmentsViewImpl
public Row getSelectedRadioRow(){
            //create a second row set to not impact the row set used in ADF
            RowSet duplicateRowSet = this.createRowSet("duplicateRowSet");
            //get the current row of the table to set it back after re-executing the VO
            DepartmentsViewRowImpl currentRow = (DepartmentsViewRowImpl)this.getCurrentRow();
            Row[] filteredRows = duplicateRowSet.getFilteredRows("IsSelected", "1");
            DepartmentsViewRowImpl row=null;
            if(filteredRows.length>0){
                row = (DepartmentsViewRowImpl)filteredRows[0];
                System.out.println("Department Name " + row.getDepartmentName());
            this.setCurrentRow(currentRow);
            duplicateRowSet.closeRowSet();
            return row;
        }

Deleting rows with missing values in field in start routine of update rule

Hello experts,
how can I delet rows with missing values in a specific field in the start routine of update rules?
I think ABAP code should look something like this:
delete ... from DATA_PACKAGE where Z_NO = ''.
thanks in advance for any suggestions!
hiza

Write:
delete data_package where field = value.
Hope it helps.
Regards

Show rows with empty values

Hello,
We are creating a cross tab report, with products as the columns, and relationship managers with direct and shared revenue displayed across the rows.
For Eg
Relationship Manager    Coverage         Product1   Product2   Product3   Product4
Bob                                Direct                 100,           0,               35,            50
                                      Shared                0,              0,               15,            0
Alex                               Direct                  15,            25,             40,            10
                                      Shared                5,              0,               5,               0
George                          Direct                  0,               0,              0,               30
                                      Shared                0,               0,              0,               5
The problem lies when either one of the products has no values, or one of the relationship managers has no direct or shared revenues. If one of the products has no revenues, it disappears, and also when one of the RMs has no direct or shared revenues, the Direct or Shared row disappears.
I have tried to create a second query just included the Coverage variable, and using this variable in Query 2 with the RM variable from query 1, along with checking the "Show Rows with Empty Measure values", "Show Rows with Empty Dimension Values" and "Show when empty", but it still does not appear to work.
It only shows rows with values in them, and shows the rows with empty values at the end with no RM.
I have not tried to solve for empty columns yet.
Help with this would be much appreciated!!!!!!!!
Thank you

Hi ,
I think you can resolve this issue following ways ,
you need create another query ( Ex :Qauery2 ) add Product object and RM (Direct,shared) object only without conation. So now query2 result wil have all product and RM(Direct,shared).
Merge the Product object and RM between query1 and query2
Now create table using Product and RM from query2 and measure value from query1. Now you will get row even there is no data.
If you want try this sample report using efasion unvierse.
1) Add year ,state and Discount objects and apply condition Year Not in list "2004" and state Not in list "California "
2) run this query and create the cross tab table . Now you will not get 2004 column and California row in table.
3) Create query2 add Year and State only without any condition , run the query. Now query 2 will display all state and year .
4) Merge the column Year and State between query1 and query2
4) Create the cross table ussing Year and state from query2 and Discount from Query1
Now cross table will show 2004 and California ,even there is not in query 1.
I hope this will help you.
Ponnarasu
Edited by: ponnarasuk on Dec 7, 2011 12:48 PM

Updating multiple rows with different values

Hi!
I have a problem. I need to update more then 1000 rows with different values. How can I do it?
For exsample i have table:
id; color, date,
1 red
2 green
3 white
I need to update date field.
Update table
set date='01.02.03'
where id=1
Update table
set date='01.03.03'
where id=2
Maybe there is way how to update multiple rows at one query?
Sorry for my bad english.
Thanks!

Hi,
You can try this
UPDATE TABLE SET DATE = CASE
                    WHEN ID = 1 THEN TO_DATE('01-02-03','DD-MM-RR')
                    WHEN ID = 2 THEN TO_DATE('01-03-03','DD-MM-RR')
                    ENDcheers
VT

How can I get the variable with the value from Thread Run method?

We want to access a variable from the run method of a Thread externally in a class or in a method. Even though I make the variable as public /public static, I could get the value till the end of the run method only. After that scope of the variable gets lost resulting to null value in the called method/class..
How can I get the variable with the value?
This is sample code:
public class SampleSynchronisation
     public static void main(String df[])
sampleThread sathr= new sampleThread();
sathr.start();
System.out.println("This is the value from the run method "+sathr.x);
// I should get Inside the run method::: But I get only Inside
class sampleThread extends Thread
     public String x="Inside";
     public void run()
          x+="the run method";
NB: if i write the variable in to a file I am able to read it from external method. This I dont want to do

We want to access a variable from the run method of a
Thread externally in a class or in a method. I presume you mean a member variable of the thread class and not a local variable inside the run() method.
Even
though I make the variable as public /public static, I
could get the value till the end of the run method
only. After that scope of the variable gets lost
resulting to null value in the called method/class..
I find it easier to implement the Runnable interface rather than extending a thread. This allows your class to extend another class (ie if you extend thread you can't extend something else, but if you implement Runnable you have the ability to inherit from something). Here's how I would write it:
public class SampleSynchronisation
public static void main(String[] args)
    SampleSynchronisation app = new SampleSynchronisation();
public SampleSynchronisation()
    MyRunnable runner = new MyRunnable();
    new Thread(runner).start();
    // yield this thread so other thread gets a chance to start
    Thread.yield();
    System.out.println("runner's X = " + runner.getX());
class MyRunnable implements Runnable
    String X = null;
    // this method called from the controlling thread
    public synchronized String getX()
      return X;
    public void run()
      System.out.println("Inside MyRunnable");
      X = "MyRunnable's data";
} // end class MyRunnable
} // end class SampleSynchronisation>
public class SampleSynchronisation
public static void main(String df[])
sampleThread sathr= new sampleThread();
sathr.start();
System.out.println("This is the value from the run
method "+sathr.x);
// I should get Inside the run method::: But I get
only Inside
class sampleThread extends Thread
public String x="Inside";
public void run()
x+="the run method";
NB: if i write the variable in to a file I am able to
read it from external method. This I dont want to do

Report Painter - how to insert sub header rows with no values

Similar Messages

Maybe you are looking for