Report Server 2005 Issue

Hi ,
I am getting the following error message when trying to access the Report Server after I configured my reporting services in SharePoint Integrated mode(which gets completed by the way).
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
Could not load file or assembly 'RSSharePointSoapProxy, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (C:\Inetpub\wwwroot\wss\VirtualDirectories\8080\web.config
line 112)
Could not load file or assembly 'RSSharePointSoapProxy, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
Any Idea what may be causing this.
Thanks & Regards
Atul LaL

Hi Atul,
Based on my research, this issue can be caused by Reporting Services add-in for SharePoint not installed on the Report Server. If in this scenario, please try to install it.
The Microsoft SQL Server 2005 Reporting Services Add-in provides a set of features that enable you to run a report server. And It is installed through a Setup program that you run at a command prompt on a server that has an instance of the SharePoint product
or technology you want to use.
For more details, please see the following documents:
Installing the Reporting Services Add-in
Requirements for Running Reporting Services in SharePoint Integrated Mode
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

  • A report that uses tablix returns error when trying to deploy to Report Server 2005

    We have some reports that have been built using tablixes, and tested in a 2008 Report Server. When trying to deploy to Report Server 2005 (don't ask why) we get an error saying
    The report definition is not valid. Details: The element 'ReportItems' in namespace 'XXXXXX' has invalid child element 'Tablix'
    So.. what is the issue? I guess 2005 does not support tablixes.. And we cannot upgrade the server version. So the real question is.. is there a workaround for this to avoid having to remake those reports for 2005??
    Thanks!
    Juan Pablo Realini .Net Developer in developement, musician, Star Wars fan, married, father of 2 1/2

    Hi Shei Pi,
    Unfortunately Microsoft provide upgrade option only, not downgrade  .
    SSRS 2005 report can be seen in 2008.. but 2008 report cant seen in 2005.
    One guy created the utility which is paid, to convert the report from 2008 version to 2005.
    You can see similar thread in MSDN here, you can find the paid utility  link also for this issue.
    https://social.msdn.microsoft.com/forums/sqlserver/en-US/bc5fbe11-531a-4a9d-861f-24625a9f4599/converting-rdl-file-of-ssrs-2008-to-ssrs-2005
    Thanks
    Prasad

  • SQL Server reporting server 2005 having error. 'The report server is not responding. Verify that report server is running and can be accessed from this computer'

    Hi team,
    I got below error message in SQL Server 2005 reporting service.
    ''The report server is not responding. Verify that report server is running and can be accessed from this computer'
    also in reports, i am getting below error:
    "The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
    Get Online Help
    The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
    Get Online Help "
    Please find below log:
    <Header>
      <Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
      <Locale>en-US</Locale>
      <TimeZone>Eastern Daylight Time</TimeZone>
      <Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
      <SystemName>MFLDDDBS04</SystemName>
      <OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
      <OSVersion>5.2.3790.131072</OSVersion>
    </Header>
    w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException'  as specified in Configuration
    file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False'  as specified in Configuration file.
    w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
    w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
    w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
    Win32 error:13;
     Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
    w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
     Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. See the report server log files for more information.
       at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
       at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
       at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
       --- End of inner exception stack trace ---

    Hi Vivek,
    In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
    we can know that it relates to the domain account for report server connection.
    To fix this issue, we can refer to the following steps:
    Log in to SQL Server Database Engine in SQL Server Management Studio.
    Under Security folder, give sufficient permissions for your domain account.
    Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
    Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
    Restart the Report Server services.
    Reference:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • OraOledb, Linked Servers and SQL Server 2005 issues

    Some issues I've come across when using SQL Server 2005 (and SQL Server Express 2005), the OraOLEDB provider (10.2.0.1) and a linked Oracle database (8.1.7.4.0 64-bit)
    1) You must set the OraOledb.Oracle\AllowInProcess value to 1 to allow the OraOledb provider to run in SQL Server's process. Without doing this I receive an 'unspecified error' from the OLE DB provider when attempting to run a query
    2) When running a ' select * ' query across a linked server using the provider, I receive the following error: Msg 9803, Level 16, State 1, Line 1
    Invalid data for type "numeric". I can, however, select all of the columns by name and the query completes (no error). Sometimes the 'select *' query returns a few rows before the error, sometimes it doesn't. The Microsoft Provider for Oracle does not have this problem

    Okay... I've got a Win2K3 Std Ed server (x64) running 64-bit SQL Server 2005 Enterprise Edition. I've installed the Oracle 10g 10.2.1 full client and admin tools, added two named services via the NetConfig assistant, and successfully set up (and tested) a connection via the ODBC Administrator to an Oracle database.
    Now... when I try to create a new connection manager in SQL Server 2005 Integration Services, the OLEDB provider for Oracle can't be found, and when I try to manually add an underlying OLEDB connection to the database, SQL Server reports:
    Test connection failed because of an error in initializing provider. The 'OraOLEDB.Oracle.1' provider is not registered on the local machine.
    Does anyone know what I need to do to see my ODBC Server data connections in SQL Server 2005 (64 bit)? I don't have this issue on my 32-bit SQL Server 2005 servers.

  • Report server name issue

    Dear All,
    I am stucking with the following problem,
    I have deployed my ERP apllication (developed in oracle forms & reports 10g) on oracle apllication server 10g forms & report services. my apllication server has two LAN card. out of two one has been configured with statis IP for web access. but while running report from parameter form i am taking report url from table. table contain report server name as my local server name.
    My problem is,
    If i am accessing erp from web using static ip and running report then server name is not recognized
    because it is my local server name coming from table. so for that every time i need to change report url & replace server name with statis ip in browser addr for web users.
    Please guide me what should i do to resolve this issue.
    Your reply would be greatly apprecited.
    Thanks

    If "Credentials supplied by the user running the report" is selected, when the report is run, the user will be prompted to provide credentials.  They would need to provide credentials that have the appropriate permissions (e.g., read, execute) to the
    database.  This prevents the double hop.
    If "Credentials stored securely in the report server" is selected, you have to enter the username and password of a user (or service account) that has the appropriate permissions (e.g., read, execute) to the database. When the report is run, SSRS will use
    these stored credentials each time to authenticate to the database engine and query the data.  Users running the report are not prompted to provide credentials.  With this option you can use an Active Directory or SQL Server account.
    In order to access/run the report, a user will need to authenticate to SSRS.  There are options here as well. You can provide them the link to the report manager and they can authenticate, navigate to, and run the report.  You can also provide
    direct links to reports that users click in a document or application.  At this point the user is typically still prompted to authenticate to SSRS.  You can also programmatically call the report using API's and essentially build a proxy that authenticates
    to SSRS and open the report.
    Not sure if that answers your question.

  • OraOledb for 64-bit, Linked Servers and SQL Server 2005 issues

    Our environment is : SQL Server 2005, Windows Server 2003, 64-bit and 32-bit operating systems.
    Problem on 64-bit operating system box: (32-bit works fine).
    I am trying to access Oracle 10g database using linked server from our SQL Server 2005. In case of number fileds i got the following error:
    Invalid data for type "numeric".
    After going through one of the posting in this forumn i was able to resolve the problem by converting those column values to char while querying and then converting them back to numeric type on SQL server side.
    But today i ran into another problem. There is a VARCHAR2 column. I was able to retrieve the data yesterday for that column but today i am getting a blank recordset. If i exclude the colum from the query then i am getting all the rows.
    I am querying against a view and it has got a number of columns whose data type is VARCHAR2.
    Again the problem is on 64-bit operating system only. We have a 32-bit operating system on which i am able to retrieve the data including this column. I looked at the data and everything looks OK. No funny characters etc.
    I tried workarounds like using cast, to_char, checking for nulls etc., Nothing works.
    Any help is greately appreciated. Thanks.

    Did you find a resolution for this? We have similar problem. Set up a linked server in SQL 2006 to Oracle (running on Windows 64-bit) Linked server works and views I had set up were working but they added some new data in the Oracle test database I am using and now I get errors on one of the views.
    Error I am getting on the view is "Cannot initialize the data source object of OLE DB Provider "OraOLDEDB.ORacle" for the linked server"
    If I fine tune my queries to find the specific table or view that is at issue, then I get the error "inconsistent metadata for a column"

  • Report Server Configuration Issue

    Hi all  ,
    We are trying to install Report Server 11gR2 ( 11.1.2.1.0) , Weblogic Server is 10.3.6.0 on Sun Solaris on Sparc (64-bit) version 11. Java used is JDK1.7_21 .
    We first installed Weblogic and did a software only install of Forms and Reports 11g. Now we are trying to configure Report Server by running config.sh from $ORACLE_HOME/bin directory.
    Everything is working fine untill wizard try to restart WLS_REPORT server . When it tries to restart WLS_REPORT managed server it gives unable to restart managed server error. Log files of Managed server are giving below error :-->
    <Dec 9, 2013 5:40:27 AM CST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason:
    java.lang.ExceptionInInitializerError
    java.lang.ExceptionInInitializerError
            at weblogic.rjvm.LocalRJVM.getLocalRJVM(LocalRJVM.java:72)
            at weblogic.rjvm.JVMID.<init>(JVMID.java:373)
            at weblogic.rjvm.JVMID.setLocalID(JVMID.java:239)
            at weblogic.rjvm.RJVMService.setJVMID(RJVMService.java:48)
            at weblogic.rjvm.RJVMService.start(RJVMService.java:30)
            Truncated. see log file for complete stacktrace
    Caused By: java.security.ProviderException: Error parsing configuration
            at sun.security.pkcs11.Config.getConfig(Config.java:71)
            at sun.security.pkcs11.SunPKCS11.<init>(SunPKCS11.java:110)
            at sun.security.pkcs11.SunPKCS11.<init>(SunPKCS11.java:86)
            at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
            at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
            Truncated. see log file for complete stacktrace
    Caused By: sun.security.pkcs11.ConfigurationException: Unknown keyword 'useEcX963Encoding', line 15
    at sun.security.pkcs11.Config.parse(Config.java:425)
            at sun.security.pkcs11.Config.<init>(Config.java:194)
            at sun.security.pkcs11.Config.getConfig(Config.java:67)
            at sun.security.pkcs11.SunPKCS11.<init>(SunPKCS11.java:110)
            at sun.security.pkcs11.SunPKCS11.<init>(SunPKCS11.java:86)
            Truncated. see log file for complete stacktrace
    >
    The WebLogic Server encountered a critical failure
    Reason: Assertion violated
    Exception in thread "main" java.lang.NoClassDefFoundError: Could not initialize class weblogic.protocol.ServerIdentityManager
    $Initializer
            at weblogic.protocol.ServerIdentityManager.findServerIdentity(ServerIdentityManager.java:64)
            at weblogic.protocol.URLManager.findAdministrationURL(URLManager.java:173)
            at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:1078)
            at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:429) "
    What could be the cause of this error , we had done all the prerequisites and Admin Server is also working fine .
    Please help .
    Regards

    Hi Subathra,
    From the
    document, we can know that “Starting with the SQL Server 2012 release, the Reporting Services Configuration Manager is not designed to manage SharePoint mode report servers. SharePoint mode is managed and configured by using SharePoint Central Administration
    and PowerShell scripts.” It means that the Reporting Services Configuration Manager (2012) is no longer required or supported to configure and administer Reporting Services SharePoint mode. We should use SharePoint Central Administration and PowerShell scripts
    to configure this.
    For more details about how to install Reporting Services 2012 SharePoint Mode for SharePoint 2013, we can refer to the following articles:
    http://msdn.microsoft.com/en-us/library/jj219068.aspx
    http://blogs.msdn.com/b/biblog/archive/2012/12/04/installing-and-configuring-sql-reporting-services-on-sharepoint-2013.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Reporting server installation issue

    Hello,
    I have a problem while installing SCOM 2012 R2 Reporting server. My configuration is as follows:
    1) 3 servers - 1 database server on SQL 2012 Standard SP2 + 2 SCOM 2012 R2 Management servers
    2) all servers on Windows 2012 R2 Standard
    3) Windows Firewall is disabled on all servers
    4) DB server + Reporting server is installed on SQL server
    5) I am able to access SQL Reporting server URLs
    6) Account I am using to install is local admin on SQL and SCOM management server and has public and sysadmin role in SQL
    During the installation I got error messages below. Any idea?
    [17:05:40]: Error: :ModifySRSServiceAccount failed.: Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BE, Exception.Message:
    [17:05:40]: Error: :StackTrace:   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
       at System.Management.ManagementObject.InvokeMethod(String methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingConfigurationHelper.ReportingConfiguration.ModifySRSServiceAccount(String userName, String userPassword, String sqlSRSServer, String srsServiceName, String sqlServerForSRSDatabase,
    String srsDBName)
    [17:05:40]: Warn: :Message:SetSRSSecurity Exception Exception: . Will retry..
    [17:05:40]: Debug: :Now Sleeping for : 60000 milliseconds
    [17:06:40]: Debug: :More: 4 rety to go..

    Hi,
    Did you install SCOM reporting on the SQL server which has SQL Reporting service running?
    Have you followed the link below:
    http://www.rickygao.com/step-by-step-installing-system-center-2012-r2-operation-manager/
    In which step you got this error. How about changing another admin account to install the reporting server?
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Issues while migration reports to 2012 report server .

    I am stuck in report server related issue . Following are steps and log files details  for migrating report server database from 2005 to 2012 :-
    Back up the encryption key for the report server database.
    Back up the report server database a SQL Server database.
    Back up the report server configuration files.
    Restore the database from the backup created , As temporary database and the main database are depend so they should be restored together.
    Start the Reporting Services Configuration tool and connect to the Reporting Services instance you just installed.
    Configure URLs for the report server and Report Manager
    Configure the report server database, selecting the existing report server database from your previous installation. After successful configuration, the report server services
    will restart, and once a connection is made to the report server database, the database will be automatically upgraded to SQL Server 2012 Reporting Services.
    As we were not able to figure out the password I tried another approach to test if the
    report server works after deleting the encrypted data . I deleted encrypted data.
    Error below is shown in log files when I try to access report manager .
    Log Files Details:-
    at Microsoft.ReportingServices.UI.FolderItems.LoadItems()
       at Microsoft.ReportingServices.UI.SortableItems.Control_Init(Object sender, EventArgs args)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.AddedControl(Control control, Int32 index)
       at Microsoft.ReportingServices.UI.FolderContentsPageCtrl.Control_Init(Object sender, EventArgs args)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.AddedControl(Control control, Int32 index)
       at Microsoft.ReportingServices.UI.SharedArea.Control_Init(Object sender, EventArgs args)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.AddedControl(Control control, Int32 index)
       at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Page.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    ui!ReportManager_0-1!1e18!07/30/2012-05:17:31:: e ERROR: HTTP status code --> 200
    -------Details--------
    System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException:
    An internal error occurred on the report server. See the error log for more details.
       at Microsoft.ReportingServices.Library.ReportingService2005Impl.ListChildren(String Item, Boolean Recursive, CatalogItemList& CatalogItems)
       at Microsoft.ReportingServices.WebServer.ReportingService2010.ListChildren(String ItemPath, Boolean Recursive, CatalogItem[]& CatalogItems)
       at Microsoft.ReportingServices.UI.FolderItems.LoadItems()
       at Microsoft.ReportingServices.UI.SortableItems.Control_Init(Object sender, EventArgs args)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.AddedControl(Control control, Int32 index)
       at Microsoft.ReportingServices.UI.FolderContentsPageCtrl.Control_Init(Object sender, EventArgs args)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.AddedControl(Control control, Int32 index)
       at Microsoft.ReportingServices.UI.SharedArea.Control_Init(Object sender, EventArgs args)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Control.AddedControl(Control control, Int32 index)
       at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Page.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    library!ReportServer_0-2!160c!07/30/2012-05:17:31:: i INFO: Call to GetSystemPropertiesAction().
    ui!ReportManager_0-1!1e18!07/30/2012-05:17:32:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
       at System.Threading.Thread.AbortInternal()
       at System.Threading.Thread.Abort(Object stateInfo)
       at System.Web.HttpResponse.End()
       at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)

    Hello Manish,
    I am sorry for my delay.
    As we know, the service pack of SQL Server is free to download and install, and the latest SP for SQL server 2005 is SP4, so that Microsoft recommend that we migrate the service from SQL Server 2005 SP4 to SQL Server 2012. If you still want to upgrade the
    service from SSRS 2005 SP3, we cannot guarantee that all features can work properly, and we did not test it yet. Therefore, I still recommend you upgrade the SQL server 2005 to SP4 if possible.
    In addition, you can refer to the following article on MSDN to see whether it can meet your requirement. It is a general step to migrate the SSRS.
    http://msdn.microsoft.com/en-us/library/ms143747.aspx
    I hope it is helpful to you.
    Regards,
    Edward
    Edward Zhu
    TechNet Community Support

  • Invalid Key code Error while installing crystal report server 11

    While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
    MAILS--Dear Mohit,
    Thanks for the patience.
    We have received the below update from the Licensing Team.
    You received your permanent key in respect of these licenses - the key is  for Crystal Reports Server XI.
    You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer.  The software included was version XIR2, but you elected to use version XI instead and received key .
    You would need to enroll the licenses in maintenance if you want to upgrade them.
    In case of any queries please create a ticket via the Service Market Place.
    Regards,
    Jessy
    Customer Interaction Center
    SAP Active Global Support
    Hello Jessy,
    The customer received their permanent key in respect of these licenses - the key is  for Crystal Reports Server XI.
    They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer.  The software included was version XIR2, but they elected to use version XI instead and they received key .
    They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
    Kind regards,
    Rosemary
    From: BOSAPASIA
    Sent: 29 September 2009 05:49
    To: Savage, Rosemary
    Subject: FW: Crystal Reports Server Installation Issue
    Importance: High
    HI Rose ,
    Need your assistance on the below issue.
    Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
    He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
    Regards,
    Jessy
    CIC Team Lead
    Customer Interaction Center
    Global Support Centre India
    SAP Labs India Pvt Ltd
    Hi,
    Providing you with the required details to proceed further
    Registration Number-
    Registration Email Address-taxmantra.support
    And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
    Dear Mohitk,
    Thank you for your information.
    I checked with the concerned colleague and received the below update:
    Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
    If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
    If you did not register before, as the promotion is over so the key code could not be replaced.
    I request you to kindly check the same at your end and revert with the details.
    Moreover, there are two ways for Crystal Report customer to get support.
    One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
    A learning map was provided, listed on left column.
    The other is customer with only Crystal report product, the support is via SDN.
    http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
    Customers can first check whether other customer has got the same issue and find the reply from our engineers.
    You may also post your own thread for support.
    Anything else I could help, please do not hesitate to contact again.
    Hi,
    I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
    Please find attached the Scanned Document  containing the details as per the details required by you.
    Hope to see a quick resolution for the issue.
    Dear Mohit,
    Thank you for your e-mail.
    As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
    Your customer number:
    Your customer name and address:
    Purchase order number:
    Any other products purchased along with Crystal Reports Server 11
    Any S-User Id:
    Any old case ID:
    Please feel free to contact us if any further queries.
    Hi,
    I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
    We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
    "The product key code you have entered is incorrect"
    We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
    Please help us to resolve the issue as early as possible.
    My contact number:
    If you need any further information do let me know

    Ajit,
      By design, the product is not able to be installed under the superuser account.
    1.  Create a new user and specify a home directory for the user without a quota set.
    2.  Copy or move the installation files to a directory that the new user can read.  I suggest you move the installation files directly into the new user's home directory.
    3.  Logon as the new user (or su - newuser)
    4.  run the installation shell script using that new user's account.
    NOTE:  Ensure the system meets the requirements from the supported platforms documents.
    .Tony

  • Reporting Service 2005 to 2014 migration.

    We are in the middle of migrating our SSRS 2005 server to SSRS 2014. So far all the reports are working except our barcode reports.
    When we try and upload the barcode reports we get the following message:
    "The definition of this report is not valid or supported by this version of Reporting Services. The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based
    on Reporting Services schemas. Details: Deserialization failed: The element 'Style' in namespace 'http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition' has invalid child element 'Border' in namespace 'http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition'.
    List of possible elements expected: 'BorderColor, BorderStyle, BorderWidth, BackgroundColor, BackgroundGradientType, BackgroundGradientEndColor, BackgroundImage, FontStyle, FontFamily, FontSize, FontWeight, Format, TextDecoration, TextAlign, VerticalAlign,
    Color, PaddingLeft, PaddingRight, PaddingTop, PaddingBottom, LineHeight, Direction, WritingMode, Language, UnicodeBiDi, Calendar, NumeralLanguage, NumeralVariant' in namespace 'http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition' as well
    as any element in namespace '##other'. Line 664, position 26. (rsInvalidReportDefinition)."
    If I change
    http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition
    With
    http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition
    We get the following message:
    "The definition of this report is not valid or supported by this version of Reporting Services. The report definition may have been created with a later version of Reporting Services, or contain content that is not formed or not valid based on Reporting
    Services schemas. Details: The report definition has an invalid target namespace " which cannot be upgraded. (rsInvalidReportDefinition)"
    Here is an example of one of our report files: (too many characters to upload here so I've linked it to my DropBox)
    https://www.dropbox.com/s/z5eb9m9cpw6ivrj/Item%20Barcodes%20%28Subassembly%29%20-%20Neodynamic.rdl?dl=0
    What needs to be changed for these reports to run on 2014?

    Hi Kelvin.uk,
    Based on my understanding, you are migrating the content of Report Server 2005 to Report Server 2014, but the barcode reports can’t be uploaded to report server 2014 and error is thrown out.
    In Reporting Services, upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file. In your scenario, since you are migrating the reports to a new environment with a higher Reporting Services version installed, and some
    .NET components are referenced when creating the barcode reports, you should upgrade reports definition, then deploy them to report server.
    Reference:
    Upgrade Reports
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • Issues in exporting SSRS report to PDF format in Report Server - Blank spaces are deleted

    Hi Gurus,
    I have a problem in exporting SSRS report to PDF format. It deletes all the blank spaces when I use bullet in a Text box and try to export to PDF formt in Report Server . For example
    •             Project submitted to the TRC
    Result in PDF format:
         • ProjectsubmittedtotheTRC
    I also noted that when I try to export to PDF in Visual Stuio 2005 (Business Intelligence development studio), it does not delete any blank spaces and shows the correct aligned Data in PDF format.
    Please help me as it is frustrating a lot
    I would highly appreciate for your quick response 

    Was there ever a solution found for this as i have the same issue.
    When bullet point is entered in a field all the spaces are removed when exported to PDF
    i tried exporting to excel and it does not remove spaces, however this is no use to me as it needs to be in PDF
    Using IE 7 (Don't think the browser has anything to do with it as this happened via a subscription)
    Didn't know SSRS had specific Service Packs, i though they came as patches to SQL Server (SQL Server is on Service Pack 3)
    This should be easy to replicate all you need to do is copy text containing a bullet point into a sql server database field and then add this field to a report export to pdf and the spaces are gone
    Thanks in advance,
    Mark Brunton
    brunzire

  • I plan to upgrade the SSRS 2005 SP2 enterprise edition in our internal web server to 2005 SP4, the Reporting server database is hosted in another sql server in sql server 2005 SP4. Do I need to do anything on the reporting server database side?

    My question is what the steps do I need to take to upgrade SSRS from 2005 SP2 to SP4.  The web server that host the SSRS is in 2005 SP2, and the OS is in window 2003. 
    Our SSRS report server and report server database are in different servers.  The SSRS in the web server is in 2005 SP2 enterprise edition, the report server database is in sql server 2005 SP4 enterprise edition.
    To upgrade the SSRS in web server from 2005 sp2 to sp4, do I need to backup/restore the encryption key?  Nothing will be changed in the report server database.  We will still pointing to the same database in the current server, all
    I wanted to do is performing a inplace upgrade of SSRS from 2005 SP2 to SP4.  
    Any response will be greate appreciated.  Thank you!
    Li-hui Chen

    Hi Lihui Chen,
    According to your description, you want to install the Services Pack 4 for SQL Server. Right?
    In SQL Server, Services Packs are used for fixing issues of current version product. It's not an Upgrade, you don't have to backup/restore your encryption key. You just need to download the Service Pack 4 on:
    Microsoft SQL Server 2005 Service Pack 4 RTM  . Please make sure you have administrative rights on the computer to install SQL Server 2005 SP4. For more information, see links below:
    How to obtain the latest service pack for SQL Server 2005
    List of the issues that are fixed in SQL Server 2005 Service Pack 4
    SQL Server 2005 SP4, KBA 2463332, Installation Issues
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Can Reporting Services 2005 report on SQL Server 2012 database?

    We would like to upgrade our SQL Server from Standard 2005 to Enterprise/Standard 2012. Unfortunately, we also have a lot of reports based on Reporting Services 2005. If possible we would like avoid upgrading them at this time.
    Is it possible to run Reporting Services 2005 of SQL Server 2012? If yes then is there pre-requiste  like drivers  or dll or any other to connect SSRS 2005 to SQL server 2012?  
    If we run Reporting Services 2005 of SQL Server 2012  then do we will face performance lag issue due to version difference of SSRS 2005 and SQL server 2012?

    Moderators,
    Can anyone merge this -
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2c44351c-35b4-4208-a2b7-88fc810d53ff/can-reporting-services-2005-report-on-sql-server-2012-database?forum=sqlreportingservices
    sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

  • Datetime from SQL server 2005 to Crystal Reports 11 subtracting 6 hours

    I have a view that I build a report from in crystal reports 11.  in the view in SQL server 2005 I have a date field that returns 2008-12-15 00:00:00.000 but when I view this in Crystal Reports it shows up as 12/14/08   6:00 pm.  Any suggestions why this is happening?

    never mind this post.  looks like it is the oledb provider we are using that has the issue.

Maybe you are looking for

  • Can't connect over d-link, why? Is airport better?

    i just spent the evening trying to have a PBookG4 connect to the internet over a d-link 1310 wireless router with cable access. The computer sees the router and can configure it, the router is obviously connected to the net. but why can't the mac mak

  • How to Insert Fields in ColumnSet of Change Layout Buttonof ALVgrid Output?

    Hi Guys,             Can anybody tell me how to insert columns in Column Set of Change Layout Button.My Reuireemnt is i Have to display the Basic Layout and have to provide the other fields in the "Columnset" in Change Layout which will be displayed

  • SOAP sender - how to ensure EOIO for end to end processing

    Hi experts,     In our scenario SOAP client -> XI -> ABAP proxy - the sender is interested in sending messages with QOS = EOIO. In SAP-help I have found: 1) The SOAP message provided by the SOAP client must contain a unique GUID. This can be provided

  • Creating booklet: Should image files from illustrator be in PDF format??

    Good morning, Over the weekend i got thinking about a image booklet i am looking to create. Despite being a newbie, i feel as though i have made great strides in becoming familiar with both Indesign and Illustrator. Having created artwork in Illustra

  • Audio Drop out @ every 2 seconds

    Having issue with the Audio dropping out every @ 2 seconds, indepentant of source (local, sync'd computer and web trailers). Have done factory reset, still doing the same thing. AppleTV is connected to the TV through HDMI connection.