Report Server Configuration Issue

Hi all ,
We are trying to install Report Server 11gR2 ( 11.1.2.1.0) , Weblogic Server is 10.3.6.0 on Sun Solaris on Sparc (64-bit) version 11. Java used is JDK1.7_21 .
We first installed Weblogic and did a software only install of Forms and Reports 11g. Now we are trying to configure Report Server by running config.sh from $ORACLE_HOME/bin directory.
Everything is working fine untill wizard try to restart WLS_REPORT server . When it tries to restart WLS_REPORT managed server it gives unable to restart managed server error. Log files of Managed server are giving below error :-->
<Dec 9, 2013 5:40:27 AM CST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason:
java.lang.ExceptionInInitializerError
java.lang.ExceptionInInitializerError
        at weblogic.rjvm.LocalRJVM.getLocalRJVM(LocalRJVM.java:72)
        at weblogic.rjvm.JVMID.<init>(JVMID.java:373)
        at weblogic.rjvm.JVMID.setLocalID(JVMID.java:239)
        at weblogic.rjvm.RJVMService.setJVMID(RJVMService.java:48)
        at weblogic.rjvm.RJVMService.start(RJVMService.java:30)
        Truncated. see log file for complete stacktrace
Caused By: java.security.ProviderException: Error parsing configuration
        at sun.security.pkcs11.Config.getConfig(Config.java:71)
        at sun.security.pkcs11.SunPKCS11.<init>(SunPKCS11.java:110)
        at sun.security.pkcs11.SunPKCS11.<init>(SunPKCS11.java:86)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
        Truncated. see log file for complete stacktrace
Caused By: sun.security.pkcs11.ConfigurationException: Unknown keyword 'useEcX963Encoding', line 15
at sun.security.pkcs11.Config.parse(Config.java:425)
        at sun.security.pkcs11.Config.<init>(Config.java:194)
        at sun.security.pkcs11.Config.getConfig(Config.java:67)
        at sun.security.pkcs11.SunPKCS11.<init>(SunPKCS11.java:110)
        at sun.security.pkcs11.SunPKCS11.<init>(SunPKCS11.java:86)
        Truncated. see log file for complete stacktrace
>
The WebLogic Server encountered a critical failure
Reason: Assertion violated
Exception in thread "main" java.lang.NoClassDefFoundError: Could not initialize class weblogic.protocol.ServerIdentityManager
$Initializer
        at weblogic.protocol.ServerIdentityManager.findServerIdentity(ServerIdentityManager.java:64)
        at weblogic.protocol.URLManager.findAdministrationURL(URLManager.java:173)
        at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:1078)
        at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:429) "
What could be the cause of this error , we had done all the prerequisites and Admin Server is also working fine .
Please help .
Regards

Hi Subathra,
From the
document, we can know that “Starting with the SQL Server 2012 release, the Reporting Services Configuration Manager is not designed to manage SharePoint mode report servers. SharePoint mode is managed and configured by using SharePoint Central Administration
and PowerShell scripts.” It means that the Reporting Services Configuration Manager (2012) is no longer required or supported to configure and administer Reporting Services SharePoint mode. We should use SharePoint Central Administration and PowerShell scripts
to configure this.
For more details about how to install Reporting Services 2012 SharePoint Mode for SharePoint 2013, we can refer to the following articles:
http://msdn.microsoft.com/en-us/library/jj219068.aspx
http://blogs.msdn.com/b/biblog/archive/2012/12/04/installing-and-configuring-sql-reporting-services-on-sharepoint-2013.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

There is no ZENworks Reporting Server configured

There is no ZENworks Reporting Server configured in the Management Zone.
This shows up on a fresh install of primary server (only server) in the ZCC under reporting I did not get any errors when I installed the server. This looks like a duplicate post from some Windows users but there was not much help there for me. Is the Reporting server not part of the default install? I see no errors in the logs and not sure how to proceed.
Thanks

Originally Posted by mmayer5823
There is no ZENworks Reporting Server configured in the Management Zone.
This shows up on a fresh install of primary server (only server) in the ZCC under reporting I did not get any errors when I installed the server. This looks like a duplicate post from some Windows users but there was not much help there for me. Is the Reporting server not part of the default install? I see no errors in the logs and not sure how to proceed.
Thanks
No, as you can see here: NOVELL: Downloads - Novell ZENworks 10 Configuration Management SP3 (10.3) Standard there is a separate ISO for the reporting server.
Thomas

SQL Server Reporting Services configuration issue

When I click on “System Settings” in the SSRS service application management I get an 503 (server Unavailable) error even though the service is running.
The farm consists of 4 servers (2 Web and 2 Application server). SSRS is running on one of the application server. SharePoint 2013, SSRS 2012.
SP2013 WFEs - Installed only RS Add In
SP2013 APP1 - Installed RS in SP Mode, SQL 2012 SP1 and Add-in.
In services on server, The SSRS service is started on the application server.
I can activate/deactivate Site collection feature for Report Server Integration Feature.
Add Reports Content Type in document library.
Has anyone see anything like this or have an explanation of what is happening?
Thanks and Regards, Parth

w3wp.exe (0x43DC) 0x0AF0
SharePoint Foundation General
ajlz0 High
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ServiceModel.ServerTooBusyException: The HTTP service located at http://servername:32843/a5febe755f494ab7a0b2a4823c10a969/ReportingWebService.svc
is unavailable. This could be because the service is too busy or because no endpoint was found listening at the specified address. Please ensure that the address is correct and try accessing the service again later. ---> System.Net.WebException: The
remote server returned an error: (503) Server Unavailable. at System.Net.HttpWebRequest.GetResponse() at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
--- End of inner exception stack trace --- Server stack trace: at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout) at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) at
System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[]
ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage
message) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type) at Microsoft.ReportingServices.ServiceContract.IReportServiceManagement.ListJobs() at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.<>c__DisplayClass1.<ListJobs>b__0(IReportServiceManagement
mchannel) at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.DoManagementChannelCall(Action`1 caller) at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesJobsManagement.get_Jobs()
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesJobsManagement.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
77e6dc9c-5396-30aa-eca0-2879f8f287e4
Thanks and Regards, Parth

Report Server 2005 Issue

Hi ,
I am getting the following error message when trying to access the Report Server after I configured my reporting services in SharePoint Integrated mode(which gets completed by the way).
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
Could not load file or assembly 'RSSharePointSoapProxy, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (C:\Inetpub\wwwroot\wss\VirtualDirectories\8080\web.config
line 112)
Could not load file or assembly 'RSSharePointSoapProxy, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
Any Idea what may be causing this.
Thanks & Regards
Atul LaL

Hi Atul,
Based on my research, this issue can be caused by Reporting Services add-in for SharePoint not installed on the Report Server. If in this scenario, please try to install it.
The Microsoft SQL Server 2005 Reporting Services Add-in provides a set of features that enable you to run a report server. And It is installed through a Setup program that you run at a command prompt on a server that has an instance of the SharePoint product
or technology you want to use.
For more details, please see the following documents:
Installing the Reporting Services Add-in
Requirements for Running Reporting Services in SharePoint Integrated Mode
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Report server name issue

Dear All,
I am stucking with the following problem,
I have deployed my ERP apllication (developed in oracle forms & reports 10g) on oracle apllication server 10g forms & report services. my apllication server has two LAN card. out of two one has been configured with statis IP for web access. but while running report from parameter form i am taking report url from table. table contain report server name as my local server name.
My problem is,
If i am accessing erp from web using static ip and running report then server name is not recognized
because it is my local server name coming from table. so for that every time i need to change report url & replace server name with statis ip in browser addr for web users.
Please guide me what should i do to resolve this issue.
Your reply would be greatly apprecited.
Thanks

If "Credentials supplied by the user running the report" is selected, when the report is run, the user will be prompted to provide credentials. They would need to provide credentials that have the appropriate permissions (e.g., read, execute) to the
database. This prevents the double hop.
If "Credentials stored securely in the report server" is selected, you have to enter the username and password of a user (or service account) that has the appropriate permissions (e.g., read, execute) to the database. When the report is run, SSRS will use
these stored credentials each time to authenticate to the database engine and query the data. Users running the report are not prompted to provide credentials. With this option you can use an Active Directory or SQL Server account.
In order to access/run the report, a user will need to authenticate to SSRS. There are options here as well. You can provide them the link to the report manager and they can authenticate, navigate to, and run the report. You can also provide
direct links to reports that users click in a document or application. At this point the user is typically still prompted to authenticate to SSRS. You can also programmatically call the report using API's and essentially build a proxy that authenticates
to SSRS and open the report.
Not sure if that answers your question.

There is no ZENworks Reporting Server configured in the Management Zone

I have ZCM 10.1 installed on SUSE. I installed Reporting. The above is the
message when I go to reporting so here I sit. I can't seem to find anything
in the documentation to configure it other than a pointer to the SAP website.
That isn't particularly helpful.
Any pointers or advice?
Bob Taylor
Harrang Long Gary Rudnick P.C.
bob.taylor at harrang.com
Bob J. Taylor
Harrang Long Gary Rudnick P.C.
bobdottaylor@harrangdotcom

Sorry it took me so long to see this reply. I started looking at your tids
and it turns out that Reporting is not installing. All I have is the xml log
which I am having trouble understanding. I have attached it as I am not sure
what to look for.
Bob
On Thu, 15 Jan 2009 22:25:13 GMT, "Susan Perrin" <[email protected]> wrote:
>Hi
>
>Can you check out the following tids:
>
>7001797
>7000973
>
>Also be sure you aren't logging into the zcc using a user source syntax such
>as [email protected] (see readme about this)
>
>If 7001797 helps you out, I'd like to followup with a test that we are
>considering for future releases.
>
>If the services can't start then we would want the install logs. See tid
>3418069 section
>
>Component Name: Installation and Deployment - ZENworks Reporting Server
>(Business Objects Enterprise)
>
>Thank you
>Susan
>
>
>"Bob J. Taylor" <bob.taylor_at_harrang.com@> wrote in message
>news:[email protected]. .
>> Forgot to add this isn't a 64bit machine and reporting and ZCM are on the
>> same
>> server.
>>
>>
>> Bob
>>
>> On Wed, 19 Nov 2008 18:31:44 GMT, Bob J. Taylor
>> <bob.taylor_at_harrang.com@>
>> wrote:
>>
>>>I have ZCM 10.1 installed on SUSE. I installed Reporting. The above is
>>>the
>>>message when I go to reporting so here I sit. I can't seem to find
>>>anything
>>>in the documentation to configure it other than a pointer to the SAP
>>>website.
>>>That isn't particularly helpful.
>>>
>>>Any pointers or advice?
>>>
>>>
>>>Bob Taylor
>>>Harrang Long Gary Rudnick P.C.
>>>bob.taylor at harrang.com
>>>Bob J. Taylor
>>>Harrang Long Gary Rudnick P.C.
>>>bobdottaylor@harrangdotcom
>> Bob J. Taylor
>> Harrang Long Gary Rudnick P.C.
>> bobdottaylor@harrangdotcom
>
Bob J. Taylor
Harrang Long Gary Rudnick P.C.
bobdottaylor@harrangdotcom

Reporting server installation issue

Hello,
I have a problem while installing SCOM 2012 R2 Reporting server. My configuration is as follows:
1) 3 servers - 1 database server on SQL 2012 Standard SP2 + 2 SCOM 2012 R2 Management servers
2) all servers on Windows 2012 R2 Standard
3) Windows Firewall is disabled on all servers
4) DB server + Reporting server is installed on SQL server
5) I am able to access SQL Reporting server URLs
6) Account I am using to install is local admin on SQL and SCOM management server and has public and sysadmin role in SQL
During the installation I got error messages below. Any idea?
[17:05:40]: Error: :ModifySRSServiceAccount failed.: Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BE, Exception.Message:
[17:05:40]: Error: :StackTrace:   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at System.Management.ManagementObject.InvokeMethod(String methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingConfigurationHelper.ReportingConfiguration.ModifySRSServiceAccount(String userName, String userPassword, String sqlSRSServer, String srsServiceName, String sqlServerForSRSDatabase,
String srsDBName)
[17:05:40]: Warn: :Message:SetSRSSecurity Exception Exception: . Will retry..
[17:05:40]: Debug: :Now Sleeping for : 60000 milliseconds
[17:06:40]: Debug: :More: 4 rety to go..

Hi,
Did you install SCOM reporting on the SQL server which has SQL Reporting service running?
Have you followed the link below:
http://www.rickygao.com/step-by-step-installing-system-center-2012-r2-operation-manager/
In which step you got this error. How about changing another admin account to install the reporting server?
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Content Server Configuration issue

Hi Gurus
I am working on Content server configuration.
Installed Content server (640 build 201 ) on Win 2003 server
- Using SAP ECC 5.0
- This is initially our test environment so here we are not using any certificates
I am facing issue with TXN (si24_csconfig) configuration of newly installed content server.
It flash error "error occured while creating depositories"
Please note that this transaction will go on for some work if i try administrator user, which is the user for NT server where content server is installed. With any other user it again prompt for password and will not move forward untill I provide this user-pwd.
When I check in txn slg1 log following is the error message:
HTTP error: 500 (Internal Server Error) "CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver Manager] Data s
Message no. CMS025
Diagnosis
Error in accessing via HTTP
500 (Internal Server Error)
"CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver Manager] Data s
Please suggest.
Best Regards
Jaswant

Hi,
Give the following parameter in CSADMIN for windows:
Driver MaxDB
Immediately the error goes away.
Regards,
Phani.

Report server configuration

Hi
I want to configure report server in Oracle10gAS(10.1.2)in LINUX 4 so that I can run reports through browser, which were compiled in Reports2.5 .
So kindly help me through details informations , means - what are the files to be configured and how?.
With Regards
Subir

Check this link
http://www.oracle.com/technology/products/ids/daily/may02.html
Rajesh Alex

Reporting server configuration in ATG Customer Intelligence 10.0.3

Hi,
I am trying to setup an ATG customer intelligence 10.0.3 installation to support an ecommerce application running on ATG webcommerce 10.0.3. When doing the cognos configuration for the reporting server in ATG CI, its required to specify the Gateway URI and Controller URI for Gateway properties.
What should be the values of these properties?
Is it required to install any applications or webpages in Apache server to enable these 2 properties?

"The Oracle ATG Web Commerce 10.0.3 release does not have a separate documentation set. For this
release, please use the manuals in the Oracle ATG Web Commerce 10.0.2 Online Documentation Library,
which can be viewed or downloaded from the Oracle Technology Network.
Almost all the information in the 10.0.2 documentation library applies to the 10.0.3 release".
http://docs.oracle.com/cd/E22630_01/CRS.1002/index.html
Praveer

Problems with Report Server configuration

I am installing the Report Server using the Web Cartridge in Oracle Aplication Server.
The version of OAS is 4.0.
I have followed the steps indicated in the manual of configuration of the Report Server, but the cartridge it doesn't work, being obtained the following error in the logging files:
06-29-2000 12:46:40 543608 andromeda `Cartridge Server` 2696 1 0x400fff `OWS-10804: Cartridge instance failed to initialze `
06-29-2000 12:46:40 560208 andromeda `Cartridge Server` 2696 1 0x400fff `OWS-10911: Throwing exception for reason: wrkwfCreate: Error in Creating instances `
06-29-2000 12:46:40 608409 andromeda `Broker` 122 1 0x10fff `OWS-04793: Operation oracle_OAS_Cartridge_OASCartridgeFactory_create_nw returns exception IDL:oracle/OAS/Cartridge/CreateFailed:1.0 `
06-29-2000 12:46:40 760776 andromeda `Cartridge Server` 2696 1 0x400fff `OWS-10827: Cartridge LISTA/Lactas init instance callback did not return WRB_DONE `
06-29-2000 12:46:40 778988 andromeda `Cartridge Server` 2696 1 0x400fff `OWS-10911: Throwing exception for reason: wrkwInit : instance init did not return WRB_DONE `
When an application and a cartridge are defined for the Form Server there is not any problem, and OAS it works perfectly.
I wait some suggestion on that it is what can have been forgotten in the configuration the one cartridge.
Thank you in advance.

"Unable to connect to the server at CALYSTO\ReportService.
Hello Tom,
It should be "ReportServer" in the URL, not "ReportService".
In "Reporting Service Configuration Manager" look up the correct URL. Open Internet Explorer with right-mouse click => "Run as Administrator" and open the URL, this should work. Navigate to "Side setting" (on top right side),
go to tab "Security" and add your account with role "System Administrator". Afterwards you should be able to open the URL without running IE as admin.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Upstream and Downstream Server Configuration Issues

Hello
We're trying to configure an upstream and downstream server infrastructure. We believe that we have this configured and working properly but our issue is that local clients and servers are appearing on the downstream server and not the upstream server.
It would be useful for all clients to be managed from the upstream server to reduce administration time.
We manually assign computers to groups and use Group Policy to specify the client configuration. The client and server settings have these keys specified:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
Name: WUServer    Type: REG_SZ    Data: (Downstream Server)
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
Name: WUStatusServer    Type: REG_SZ    Data: (Upstream Server)
To me, this should mean that clients only get updates from the downstream server and are conmpletely managed from the upstream server but maybe it doesn't work that way?
All downstream servers are set to replicas.
Can anyone help? I'm sure you shouldn't have to assign every client to group at downstream level. I have thought about using GPO to assign to groups but it would be complicated with our structure due to testing containers and I think I would
have the same result.
Basically, I would like to assign computers to groups from all sites using the upstream server only.
Thanks in advance,
Luke

our issue is that local clients and servers are appearing on the downstream server and not the upstream server.
Number one cause associated with this symptom is not enabling Reporting Rollup on the upstream server in Options->Reporting Rollup.
It would be useful for all clients to be managed from the upstream server to reduce administration time.
This won't happen in any case. Clients are managed from the WSUS server they are assigned to. You can, however, register more than one WSUS server in the WSUS console and manage multiple WSUS servers from a single console.
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
Name: WUServer    Type: REG_SZ    Data: (Downstream Server)
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
Name: WUStatusServer    Type: REG_SZ    Data: (Upstream Server)
This is not correct, but it's not a critical issue since "WUServer" is set correctly. The WUA is just ignoring the incorrect value for "WUStatusServer". Both of these strings should be set to the same value -- the assigned WSUS server.
To me, this should mean that clients only get updates from the downstream server and are conmpletely managed from the upstream server but maybe it doesn't work that way?
It doesn't.
Basically, I would like to assign computers to groups from all sites using the upstream server only.
Not an option. You have two choices with replica servers:
Assign the group memberships from the assigned replica server.
Assign the group memberships via Group Policy.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Reporting Server Configuration

Hi,
Please share any document for configuring the Reporting services in SQL 2008 for SAP BPC M 7.0.
Thanks in Advance.
Regards,
G.Vijaya Kumar

Sorry I saw after that you are using SQL Server 2008.
Use the follow link like starting point. http://technet.microsoft.com/en-us/library/ms156305.aspx
for more details you will find another links into this article.
Regards
Sorin Radulescu

Need help on P6 v8.1 Progress Reporter installation / configuration issue

Successfully installed P6 EPPM v8.1 on Win 2k8 ent. for evaluation. However, upon completion of the progress reporter configuration an internal server is encountered.
I can successfully navigate to https://<ip>/pr page. However, when you click on the "Launch P6 Progress Reporter" link, the error 500 is presented
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
The setDomainEnv changes outlined in the administrators manual have been completed.
The database configuration has been completed and the server was restarted. (https://<ip>/pr/admin/configuration) however a couple of observations:
If I change the configuration home location the configuration does NOT stick, that is when I log back in to the pr admin configuration page I would expect to be able navigate to other tabs (i.e. connection pool, authentication, logging) but I cannot. ONLY upon accepting the default configuration home, does this take and the other tabs are presented after the restart.
Additionally, if I select to increase the logging through the admin configuration screen, and click save, then the same error 500 page is presented (see above).
Have also tried to use the http://<ip>/pr/applet?lang=en no success.

here is the log file null pointer exception.
Aug 25, 2011 1:44:51 PM org.eclipse.persistence.session.file:/C:/Oracle/Middleware/user_projects/domains/p6/servers/Server-0/tmp/_WL_user/pr/xl82q5/war/WEB-INF/lib/pr-model-8.1.0.0.jar_Model
WARNING:
java.lang.NullPointerException
at org.eclipse.persistence.internal.security.PrivilegedAccessHelper.getMethodParameterTypes(PrivilegedAccessHelper.java:318)
at org.eclipse.persistence.internal.descriptors.MethodAttributeAccessor.getSetMethodParameterType(MethodAttributeAccessor.java:143)
at org.eclipse.persistence.internal.descriptors.MethodAttributeAccessor.getSetMethodParameterType(MethodAttributeAccessor.java:131)
at org.eclipse.persistence.internal.descriptors.MethodAttributeAccessor.setAttributeValueInObject(MethodAttributeAccessor.java:257)
at org.eclipse.persistence.internal.descriptors.MethodAttributeAccessor.setAttributeValueInObject(MethodAttributeAccessor.java:201)
at org.eclipse.persistence.mappings.DatabaseMapping.setAttributeValueInObject(DatabaseMapping.java:1393)
at org.eclipse.persistence.mappings.ForeignReferenceMapping.buildCloneFromRow(ForeignReferenceMapping.java:207)
at org.eclipse.persistence.internal.descriptors.ObjectBuilder.buildAttributesIntoWorkingCopyClone(ObjectBuilder.java:1344)
at org.eclipse.persistence.internal.descriptors.ObjectBuilder.buildWorkingCopyCloneFromRow(ObjectBuilder.java:1472)
at org.eclipse.persistence.internal.descriptors.ObjectBuilder.buildObjectInUnitOfWork(ObjectBuilder.java:565)
at org.eclipse.persistence.internal.descriptors.ObjectBuilder.buildObject(ObjectBuilder.java:502)
at org.eclipse.persistence.internal.descriptors.ObjectBuilder.buildObject(ObjectBuilder.java:454)
at org.eclipse.persistence.queries.ObjectLevelReadQuery.buildObject(ObjectLevelReadQuery.java:723)
at org.eclipse.persistence.queries.ReadAllQuery.registerResultInUnitOfWork(ReadAllQuery.java:738)
at org.eclipse.persistence.queries.ReadAllQuery.executeObjectLevelReadQuery(ReadAllQuery.java:420)
at org.eclipse.persistence.queries.ObjectLevelReadQuery.executeDatabaseQuery(ObjectLevelReadQuery.java:1076)
at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:740)
at org.eclipse.persistence.queries.ObjectLevelReadQuery.execute(ObjectLevelReadQuery.java:1036)
at org.eclipse.persistence.queries.ReadAllQuery.execute(ReadAllQuery.java:380)
at org.eclipse.persistence.queries.ObjectLevelReadQuery.executeInUnitOfWork(ObjectLevelReadQuery.java:1122)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2910)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1291)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1273)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1247)
at org.eclipse.persistence.internal.jpa.EJBQueryImpl.executeReadQuery(EJBQueryImpl.java:479)
at org.eclipse.persistence.internal.jpa.EJBQueryImpl.getResultList(EJBQueryImpl.java:714)
at com.primavera.pr.dao.impl.UserDaoImpl.findByName(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.primavera.pr.jamon.JamonIndivQueriesMonitor.invoke(JamonIndivQueriesMonitor.java:33)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.primavera.pr.jamon.JamonQueryMonit

Application Server Configuration Issue - Issuing commands on the UNIX OS

Hi. The Forms folks thought it might be good to post my issue here as they believe my issue might be with the configuration of the application server. So here goes....
Hi. I'm running Forms 10g on UNIX (newbie). My first attempt at the Host command is this (in a when-button-click trigger):
cl := 'ls -ltr > /ttms/flatfile/steve_test.txt';
message (cl);
message (cl);
host(cl);
I know the code is running. My message displays the 'cl' variable exactly as I would execute it from the UNIX command line, but my text file is never created. There are no errors and the form runs as I would anticipate...just no file created.
If I issue the same command after having logged into the UNIX box then the file is created just fine.
Any suggestions as to what I might be doing wrong?

Hi Buechler,
I think indeed this a Forms forum issue. As you might know, the host command is executed on the server where Forms is installed, not the client. Also, the host command is executed as user ORACLE instead of Window's SYTEM user.
When you're doing your "cl := 'ls -ltr > /ttms/flatfile/steve_test.txt';". In which directory are you in? Do you have read-privileges to that directory? Do you have write-privileges to the /ttms/flatfile/ directory?
Regards,
Martin

Report Server Configuration Issue

Similar Messages

Maybe you are looking for