Report Server - Error creating Service Application

I am adding a report server to the farm for a customer. This is a SharePoint 2010 Foundation Farm with one SQL server, one SharePoint server and I have just added a Report Server to the Farm.
I installed SharePoint on the report server and added it to the farm. I then installed SQL 2012 Report Services SharePoint Integration Add-on and Database Engine to the Report Server. I added the Report Services and Proxy via PowerShell and everything
seemed to be working. I then configured the Report Services Service Application with the Report database being on the report server and once I clicked submit it just spins and never completed the process. When I look at the event viewer I see three
errors.
Error 1
The Execute method of job definition
Microsoft.ReportingServices.Sharepoint.SharedService.Service.DoWork.TimerJob threw an exception.
The HTTP service located at
http://blablablaReportingServiceBackgroundProcessing.svc is too busy
Error 2
The value of UrlRoot in rsreportserver.config is not valid. The default value will be used instead.
Error 3
An exception occurred while updating address for connected app. The uri endpoint information may be stale.
I also noticed that I can not access reporting services configuration manager. When I go to the reporting service configuration manager and enter the report server as the server name and click find to select the instance I get an error.
Unable to connect to the Report Server "ServerName"

Thank you for moving this question to the correct board and looking into my question.
Here is my setup and what I have done so far.
SharePoint Server 2010 Foundations(Front End & App Server)
Installed the SQL Reporting Services Add-On for SharePoint Products
Installed Reporting Services - SharePoint
SQL 2008 R2 Database Server (original database server for farm)
Did nothing to this server just hold the existing content and config database.
Report Server
Installed SharePoint 2010 Foundations and attached it to the farm.
Ran PowerShell Script to add SQL Reporting Service Application and Proxy
Started SQL Reporting Service
Installed SQL 2012 including the following components
Database Engine Services
Reporting Services - SharePoint
Reporting Services Add-in for SharePoint Products
Management Tools
Created a new Reporting Services Service Application - created a new app pool and used the Report server name as the database for the reports
This is where it would seem to get stuck when I would try to create the service application
I am very familiar with sharepoint but have not added a report server to the farm before. Can you tell me what it is trying to do when it created the service application
Thank you for your time

Similar Messages

Display the report server error in the application

i have got an error while running the report from the application , the status of the report was "TERMINATED_WITH_ERROR" which come from the "REPORT_OBJECT_STATUS" built in function ,
when i go to the application server to the failed jobs i got :
Terminated with error: REP-1401: ??? ??? ???? ?? PL/SQL: 'cf_1formula'.
ORA-01403: ?? ??? ?????? ??? ??? ??????
the problem is i wan to display to the end user this error ORA-01403
not only "TERMINATED_WITH_ERROR" .....
please help me
thanks

Give a button in your web page with 'Check status' which on hitting, make an ajax call, to query the status table, and show the status in that page.
Hope this helps

The oracle report server (rep60_ machine service returned service specific error 186

dear fellows i have installed 9i 1.2.0 on nt 4 sp5 machine
form is running ok but for report it say
Error: The requested URL was not found,
or cannot be served at this time.
Oracle Reports Server CGI - Unable to communicate with the Reports Server.
when i go to services and try to start service for report
it gives me error
The oracle report server (rep60_<machine> service returned service specific error 186
i have created a service throu start program isuite net8easyconfig
and tested that service come with success
and then copied that tnsname to 806 net80 folder
but in no vain any help

I believe you'll need to edit your tnsnames.ora file located in \ORACLE\806\NET80\ADMIN. The last line of this file should read something like
Rep60_SYSNAME, Rep60_SYSNAME.world = (ADDRESS=(PROTOCOL=tcp) (HOST=SYSNAME) (PORT=1949))
where SYSNAME is the name of the PC Reports is installed on.
I had this same error, and once I modified this file, everything seemd to work fine.
Good Luck
[email protected]

CR 2008 Report Printing,hit error "Server Error in '/CRReport' Application"

Hi
We encountered Error Message when trying to print Crystal Report 2008 via Windows Internet Explorer.
"Server Error in '/CRReports' Application."
Failed to Open Report
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error & where it originated in the code.
Exception Details:
"System.Runtime.interopService.COMException: Failed to open report."
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
I really appreciate your feedback.
Jenny Heng

Make sure you're using the latest SP:
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Consider adding latest FP also:
https://smpdl.sap-ag.de/~sapidp/012002523100001024152010E/cr2008_fp24.zip
Make sure you are disposing of the report object once you are done with it and before you re-run it with new parameters (.close, .dispose).
Test without the combo box. Let the report prompt. Can you reproduce the behavior now? If not, try to supply the parameter values via a text box. Can you reproduce the issue now? E.g.; is it the combo box that is the issue, or the report?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Report server error 1075

I have installed 9iAS v 10222 enterprise edition on p4 machine.
9iAS installed ok.
but the report server installed by default with name
Rep60_machine_name
but application are using different name for the report server
so I uninstalled the default report server by using the command
rwmts60 -uninstall Rep60_machine_name.
Now I installed the report server with the desired name using command
rwmts60 -install newname -tcpip
set the system account from services.
and start the new report server. But the error occurs while starting the report server.
the error message is
error 1075 occured: The dependency service either does not exist or have been marked for deletion
pls help
Thanks in advance
Regards
Yogesh Kumar

Hi,
this is the Oracle Forms forum, you might have more luck in the Reports forum here Reports
However, I guess you installed the reports server as a service under windows, right? Check the DependOnService registry key value under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\<reports server key>
Uninstall the reports server using rwserver -uninstall <server_name> and reinstall it using rwserver -install <server_name> [batch=yes/no] [autostart=yes/no] with valid parameters.
HTH
Gerald.

Crystal Report server error

I'm new to posting here, so please bear with me! I have installed, in this order, crystal report server XI R2 .Net server 2005 (used as a viewer for reports in our web application), Crystal report server XI (BO), Crystal Report XI, BO XI SP4 on Windows Server 2003 R2 running as a VM. When I first install crystal report server XI R2 .Net server 2005, open our web app and run Crystal reports, they run just fine. After installing BO XI, Crystal Reports XI and BO SP4, I get an error:
Server Error in '/ImageWorks' Application.
Not enough memory for operation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Not enough memory for operation.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x80041004): Not enough memory for operation.]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +87
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +279
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +341
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +964
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +73
   roi_AdminReportViewer.Page_Load(Object sender, EventArgs e) +83
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +47
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1436
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
I have loaded this same configuration on similar servers over the past 2 years with no issue. Can anyone help me? Doesn't look like the memory is being touched on the server, it's an IIS server with 1.5 GB RAM.

Hi Elaine,
So everything worked fine until you installed CRXI and BO R2 SP4? Let me know if the order of installation I have below is correct:
1. crystal report server XI R2 .Net server 2005
2. Crystal report server XI (BO)
3. Crystal Report XI
4. BO XI SP4
I know the .net viewer is usually set up in the Crystal Reports Server installation. I'm unsure as to why you have it listed separately.
Also which version of BO (Crystal Reports Server) are you installing (R1,R2,R3)?   Could you clearly outline your first 2 installation steps?

Server Error in '/ias_relay_server' Application.

Hello All,
I am getting error while enrollment code inspect.
Server Error in '/ias_relay_server' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /ias_relay_server/client/rs_client.dll/ios-farm/aips/aipService.svc/GetEnrollmentSeedData
I have checked all the rsoe service.
Can anyone suggest the what is the issue and resolution.
Regards,
Mahesh Deshmukh

Post Author: JGomes
CA Forum: Deployment
Any IIS/Windows/.NET updates? Maybe this will help, although it mainly applies after new installs: check if there is a '\' at the end of the Web Content string, under Local Path. Also, take a look at http://support.microsoft.com/kb/315122

Server Error in '/simias10' Application

Im losing sleep and hair over this error
====================
Server Error in '/simias10' Application
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /simias10/
Version information: Runtime: Mono 2.4.3; ASP.NET Version: 2.0.50727.1433
==========================
I get this message when logging into my server https://myhost/simias10. When I login as https://myhost/admin Im able to get in ok , I can connect using the ifolder MAC / Window / Iphone clients .
I followed this guide exactly - The Ramblings of an IT Engineer Lost in a Manufacturing World Insight from an IT engineer who gets pulled into everything
and have reinstalled the server sevral times with the same result .
Im using Open Suse 11.4 with the latest ifolder at Downloads . Ill pay $30.00 via paypal if you can help me get this working.
Cheers Al

This is perfectly correct message. If you are trying to access https://ip/simias10.
If you need to access any webservice you need to specify one of them like
https://ip/simias10/Simias.asmx , you will be asked to authenticate after which you can use these. some more services are iFolderAdmin.asmx, HostAdmin.asmx, iFolderWeb.asmx, iFolderBackup.asmx, DiscoveryService.asmx ..etc etc.
May i know what are you trying to do by accessing this. May be i could provide more help based on this.
>>> aappiah<[email protected]> 9/23/2011 2:16 AM >>>
Im losing sleep and hair over this error
====================
Server Error in '/simias10' Application
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its
dependencies) could have been removed, had its name changed, or is
temporarily unavailable. Please review the following URL and make sure
that it is spelled correctly.
Requested URL: /simias10/
Version information: Runtime: Mono 2.4.3; ASP.NET Version:
2.0.50727.1433
==========================
I get this message when logging into my server https://myhost/simias10.
When I login as https://myhost/admin Im able to get in ok , I can
connect using the ifolder MAC / Window / Iphone clients .
I followed this guide exactly - 'The Ramblings of an IT Engineer Lost
in a Manufacturing World Insight from an IT engineer who gets pulled
into everything' (http://troitlimw.gamersanon.com/)
and have reinstalled the server sevral times with the same result .
Im using Open Suse 11.4 with the latest ifolder at 'Downloads'
(http://www.kablink.org/download/) . Ill pay $30.00 via paypal if you
can help me get this working.
Cheers Al
aappiah
aappiah's Profile: http://forums.novell.com/member.php?userid=117117
View this thread: http://forums.novell.com/showthread.php?t=445219

500 Internal Server Error BEx Web Application

Hello,
can everybody help for the fault, or had the same error ?
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Cannot get connection for 60 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPFactory" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.
Log ID 0014C265209B005B000007300000610A000473C4612CBCB9
thanks

Hi,
I am getting similar kind of error.Can you please tell me how you resolved the issue.
Regards,
Priyanka

What does this mean? Server Error in '/BoardPortal' Application. Runtime Error Description: An application error occurred on the server. The current custom err

Server Error in '/BoardPortal' Application. 
Runtime Error 
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
 
 
<pre><nowiki>
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
</nowiki></pre>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
 
 
<pre><nowiki>
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration></nowiki></pre>

That is a problem on the web server that you are trying to access. 
This may need to be fixed at that server.
Try to clear the cache and the cookies from sites that cause the problems to see if that helps.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"

Server Error in '/ecp' Application. Runtime Error

When I try to logon to ECP I get the message below. I have tried recreating the virtual directory but this did no good. This happened after doing an update on Friday. Thanks Microsoft. Any assistance is greatly appreciated.
Server Error in '/ecp' Application.
Runtime Error
Description: An exception occurred while processing your request. Additionally, another exception occurred while executing the custom error page for the first exception. The request has been terminated.

Hi,
What’s update have you applied to Exchange?
Is there any issue while trying to access OWA?
Please take your time to collect some events related to this issue from application logs.
Based on my experience, I saw the same errors after installing CU6 in other similar threads. In that case the scenario is that the OWA related files are not copied correctly. Themes folder "C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\owa\prem\15.0.995.31\resources\themes"
doesn't exist. That issue solved by the following steps:
Stop all the Exchange related Services
Backup the
15.0.995.31 to a different directory
Copy the files and folders from 15.0.995.29 to 15.0.995.31
Start all the Exchange related services
Best Regards.

Server Error in '/NWO' Application

Hi
The date/weather in my dashboard appears empty, and when i double clic on it, it send me to a webpage with this error:
Server Error in '/NWO' Application
I´ve tried ro restar the computer, but it´s still empty. MacOs 10.5.8
Any help...?

This is perfectly correct message. If you are trying to access https://ip/simias10.
If you need to access any webservice you need to specify one of them like
https://ip/simias10/Simias.asmx , you will be asked to authenticate after which you can use these. some more services are iFolderAdmin.asmx, HostAdmin.asmx, iFolderWeb.asmx, iFolderBackup.asmx, DiscoveryService.asmx ..etc etc.
May i know what are you trying to do by accessing this. May be i could provide more help based on this.
>>> aappiah<[email protected]> 9/23/2011 2:16 AM >>>
Im losing sleep and hair over this error
====================
Server Error in '/simias10' Application
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its
dependencies) could have been removed, had its name changed, or is
temporarily unavailable. Please review the following URL and make sure
that it is spelled correctly.
Requested URL: /simias10/
Version information: Runtime: Mono 2.4.3; ASP.NET Version:
2.0.50727.1433
==========================
I get this message when logging into my server https://myhost/simias10.
When I login as https://myhost/admin Im able to get in ok , I can
connect using the ifolder MAC / Window / Iphone clients .
I followed this guide exactly - 'The Ramblings of an IT Engineer Lost
in a Manufacturing World Insight from an IT engineer who gets pulled
into everything' (http://troitlimw.gamersanon.com/)
and have reinstalled the server sevral times with the same result .
Im using Open Suse 11.4 with the latest ifolder at 'Downloads'
(http://www.kablink.org/download/) . Ill pay $30.00 via paypal if you
can help me get this working.
Cheers Al
aappiah
aappiah's Profile: http://forums.novell.com/member.php?userid=117117
View this thread: http://forums.novell.com/showthread.php?t=445219

No current report server error

Using Report Builder 3.0, I get no current report server error and when I run the report I get no data. Does anyone know how I can remedy this problem?
sukai

Hi sukai,
Based on your description, it seems that you have not connect report server when you run a report in Report Builder. In this scenario, I suggest that you should click the Connect option with “No current report server” in the lower-left corner.
If you have access to the machine where SSRS is installed, you can open up the Reporting Services Configuration Manager. Then you can see the Report Server Web Service URLs in the Web Service URL tab. Another option is directly type the following URL in
the popup window:
http://<machine name>/ReportServer_<SQL Server instance name>
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Office web apps "Server error in '/wv' Application"

Hi, I successfully installed office web app for sharepoint 2013. However, when I tried to open documents, it shows the preview but once view/edit in browser, I got this error. What seems to be the problem?
Server error in '/wv' Application.
Unable to determine zone from request

Hi ,
According to your description, my understanding is that you encountered the error “Server error in '/wv' Application. Unable to determine zone from request” when you open document using Office Web Apps.
Are you using https:// to access the Office Web Apps server? Is the default zone of your web application in Alternate Access Mappings using http:// ?
If so, you can change the default zone
of your web application in Alternate Access Mappings to use https:// .
Or set AllowOAuthOverHttp to true:
$config = (Get-SPSecurityTokenServiceConfig)
$config.AllowOAuthOverHttp = $true
$config.Update()
Reference:
http://social.technet.microsoft.com/Forums/office/en-US/de49617c-4b0a-4aa9-9877-8f085f48abc2/sharepoint-2013-sp1-and-office-web-apps-sp1-not-working-using-http?forum=sharepointadmin
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f7be5f88-8c98-464e-8596-60956b5e98fd/sharepoint-2013-office-web-apps-problem-unable-to-openviewedit?forum=sharepointgeneral
Best Regards,
Eric
Eric Tao
TechNet Community Support

Lync Server 2010 control panel - Server Error in '/cscp' Application

Hi everyone,
Recently i have installed Lync 2010 with no problem at all. But when i try to open de control panel it sends me this error:
Server Error in '/cscp' Application.
Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.TypeLoadException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[TypeLoadException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type) +0
   System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName) +153
   System.Type.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase) +63
   System.Web.Compilation.BuildManager.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase) +124
   System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) +76
[ConfigurationErrorsException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) +12406256
   System.Web.Configuration.Common.ModulesEntry.SecureGetType(String typeName, String propertyName, ConfigurationElement configElement) +69
   System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) +62
   System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) +299
   System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) +1262
   System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +133
   System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +304
   System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +404
   System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +475
[HttpException (0x80004005): Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12599232
   System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
   System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12438981
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.33440
Anyone has any idea what is going on?

To fix your issue, you can refer below link
http://social.technet.microsoft.com/Forums/lync/en-US/14948578-dfaa-4d32-b29d-42ecf576afeb/lync-control-panel-errors
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Report Server - Error creating Service Application

Similar Messages

Maybe you are looking for