Report server error 1075

I have installed 9iAS v 10222 enterprise edition on p4 machine.
9iAS installed ok.
but the report server installed by default with name
Rep60_machine_name
but application are using different name for the report server
so I uninstalled the default report server by using the command
rwmts60 -uninstall Rep60_machine_name.
Now I installed the report server with the desired name using command
rwmts60 -install newname -tcpip
set the system account from services.
and start the new report server. But the error occurs while starting the report server.
the error message is
error 1075 occured: The dependency service either does not exist or have been marked for deletion
pls help
Thanks in advance
Regards
Yogesh Kumar

Hi,
this is the Oracle Forms forum, you might have more luck in the Reports forum here Reports
However, I guess you installed the reports server as a service under windows, right? Check the DependOnService registry key value under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\<reports server key>
Uninstall the reports server using rwserver -uninstall <server_name> and reinstall it using rwserver -install <server_name> [batch=yes/no] [autostart=yes/no] with valid parameters.
HTH
Gerald.

Similar Messages

Error from explorer (Report Server Error)

Report Server Error Report 10g
REP-51002: Bind server myservername failed
Message was edited by:
Dipo Ogundele
Message was edited by:
Dipo Ogundele

this means either the reports server is already running or some issue with the reports server configuration.
Are you able to start a new reports server?
Check this link and try using list of reports server fmx to see all the reports servers in your network.
http://www.alexyscorp.com/products.htm
Rajesh Alex

No current report server error

Using Report Builder 3.0, I get no current report server error and when I run the report I get no data. Does anyone know how I can remedy this problem?
sukai

Hi sukai,
Based on your description, it seems that you have not connect report server when you run a report in Report Builder. In this scenario, I suggest that you should click the Connect option with “No current report server” in the lower-left corner.
If you have access to the machine where SSRS is installed, you can open up the Reporting Services Configuration Manager. Then you can see the Report Server Web Service URLs in the Web Service URL tab. Another option is directly type the following URL in
the popup window:
http://<machine name>/ReportServer_<SQL Server instance name>
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Crystal Report server error

I'm new to posting here, so please bear with me! I have installed, in this order, crystal report server XI R2 .Net server 2005 (used as a viewer for reports in our web application), Crystal report server XI (BO), Crystal Report XI, BO XI SP4 on Windows Server 2003 R2 running as a VM. When I first install crystal report server XI R2 .Net server 2005, open our web app and run Crystal reports, they run just fine. After installing BO XI, Crystal Reports XI and BO SP4, I get an error:
Server Error in '/ImageWorks' Application.
Not enough memory for operation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Not enough memory for operation.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x80041004): Not enough memory for operation.]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +87
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +279
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +341
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +964
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +73
   roi_AdminReportViewer.Page_Load(Object sender, EventArgs e) +83
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +47
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1436
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
I have loaded this same configuration on similar servers over the past 2 years with no issue. Can anyone help me? Doesn't look like the memory is being touched on the server, it's an IIS server with 1.5 GB RAM.

Hi Elaine,
So everything worked fine until you installed CRXI and BO R2 SP4? Let me know if the order of installation I have below is correct:
1. crystal report server XI R2 .Net server 2005
2. Crystal report server XI (BO)
3. Crystal Report XI
4. BO XI SP4
I know the .net viewer is usually set up in the Crystal Reports Server installation. I'm unsure as to why you have it listed separately.
Also which version of BO (Crystal Reports Server) are you installing (R1,R2,R3)?   Could you clearly outline your first 2 installation steps?

Unable to print a report- Server Error

I have a java/CR XI (sp3) web application which will display reporters but will not print them. When attempting to print the Crystal report viewer page shows the print dialog page with a choice of printers. When I select a printer and press print. I get a "Server Error" message box that says "An error occured on the server. Printing will be stopped. Would you like to view the error information?" When I say "yes" I get a blank page "PrintControlError.html". There is also a background window that says "Retrieving page 1".
Edited by: Allen Oliver on Sep 2, 2008 9:11 AM

That suggest a communication issue between the ActiveX Print Control and the server.
The ActiveX Print Control posts back to the generating page for each page that it prints out.
If you use [Fiddler|http://www.fiddlertool.com/] (.NET based) or [Charles|http://www.charlesproxy.com/] (Java based) on the client browser machine, are you able to see any error messages in the page 1 request?
ActiveX controls usually hide interesting error messages.
Sincerely,
Ted Ueda

Web Intelligence Report Server - Error: Failed to run rexec. Error number

Hello,
I post a message in this forum :
"When i want to start "Web Intelligence Report Server" with CMC, i've got this error :
Web Intelligence Report Server: Echec du démarrage/de l'arrêt du service sur l'ordinateur distant : Error: Failed to run rexec. Error number: %12.
Any idea ?"
I've do this command :
bouser@v-bo-1 bobje$ ./ccm.sh -restart ras
bouser@v-bo-1 bobje$
but i have always the same error "Error: Failed to run rexec. Error number: %12".
Thanks

Please try to avoid posting duplicate forum posts.
This command :
bouser@v-bo-1 bobje$ ./ccm.sh -restart ras
Restarts RAS server and has nothing to so with WebIntelligence.
To be able to Start/Stop servers from CMC, you have to have rexec running on your Unix box.
Google rexec for more information on what it does and ask your Unix admin to enable it.

Report server error

Hi all,
I have designed a report and deployed it in report server. The report worked fine in SSRS but it is showing error in report server. The error is given below,please help me
An
error has occurred during report processing. (rsProcessingAborted)
Query
execution failed for dataset 'LA_Unapproved_JV'. (rsErrorExecutingCommand)
SQL0104:
Token ( was not valid. Valid tokens: FOR SKIP WITH FETCH ORDER UNION EXCEPT
OPTIMIZE. Cause . . . . . : A syntax error was detected at token (. Token ( is
not a valid token. A partial list of valid tokens is FOR SKIP WITH FETCH ORDER
UNION EXCEPT OPTIMIZE. This list assumes that the statement is correct up to the
token. The error may be earlier in the statement, but the syntax of the
statement appears to be valid up to this point. Recovery . . . : Do one or more
of the following and try the request again: -- Verify the SQL statement in the
area of the token (. Correct the statement. The error could be a missing comma
or quotation mark, it could be a misspelled word, or it could be related to the
order of clauses. -- If the error token is <END-OF-STATEMENT>, correct the
SQL statement because it does not end with a valid
clause.

According to the error message, there is error next to (, the syntax for openquery is OPENQUERY ( linked_server ,'query' ). I used the following query in dateset and it works fine:
select * from openquery(servername,'select * from servername.testdb.dbo.t1') where name <>''
please try to use servername instead of "10.1.6.164".
In addition, make sure the part
SUD_MIS.dbo.LADate_2_Datetime(trandate) is correct.

Report Server - Error creating Service Application

I am adding a report server to the farm for a customer. This is a SharePoint 2010 Foundation Farm with one SQL server, one SharePoint server and I have just added a Report Server to the Farm.
I installed SharePoint on the report server and added it to the farm. I then installed SQL 2012 Report Services SharePoint Integration Add-on and Database Engine to the Report Server. I added the Report Services and Proxy via PowerShell and everything
seemed to be working. I then configured the Report Services Service Application with the Report database being on the report server and once I clicked submit it just spins and never completed the process. When I look at the event viewer I see three
errors.
Error 1
The Execute method of job definition
Microsoft.ReportingServices.Sharepoint.SharedService.Service.DoWork.TimerJob threw an exception.
The HTTP service located at
http://blablablaReportingServiceBackgroundProcessing.svc is too busy
Error 2
The value of UrlRoot in rsreportserver.config is not valid. The default value will be used instead.
Error 3
An exception occurred while updating address for connected app. The uri endpoint information may be stale.
I also noticed that I can not access reporting services configuration manager. When I go to the reporting service configuration manager and enter the report server as the server name and click find to select the instance I get an error.
Unable to connect to the Report Server "ServerName"

Thank you for moving this question to the correct board and looking into my question.
Here is my setup and what I have done so far.
SharePoint Server 2010 Foundations(Front End & App Server)
Installed the SQL Reporting Services Add-On for SharePoint Products
Installed Reporting Services - SharePoint
SQL 2008 R2 Database Server (original database server for farm)
Did nothing to this server just hold the existing content and config database.
Report Server
Installed SharePoint 2010 Foundations and attached it to the farm.
Ran PowerShell Script to add SQL Reporting Service Application and Proxy
Started SQL Reporting Service
Installed SQL 2012 including the following components
Database Engine Services
Reporting Services - SharePoint
Reporting Services Add-in for SharePoint Products
Management Tools
Created a new Reporting Services Service Application - created a new app pool and used the Report server name as the database for the reports
This is where it would seem to get stuck when I would try to create the service application
I am very familiar with sharepoint but have not added a report server to the farm before. Can you tell me what it is trying to do when it created the service application
Thank you for your time

Report server, error code 186

I installed 9ias(http server, forms &report server , oem server) on windows 2000, but the report server don't startup, error code 186. can you tell me how to resolve the problem.

Hi Qiang,
Please check http://metalink.oracle.com/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOT&p_id=1047650.6 for possible solutions for this error.
Thanks,
Erik

Crystal Reports Server Error - Unable to cast object of type

Hi Everyone,
Not sure if this is the right place to post this question but couldn't find a Crystal Reports Server section.
After doing a windows update on my crystal reports server the following error now occurs when trying to log into .Net InfoView -
An error has occurred: Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'BusinessObjects.Enterprise.Desktop.InfoView'.
I found the following article which I followed and re-installed the .net components as well as ensured all services are enabled.
Article: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303335333433323337%7D.do
The error still occurs.
I did some further investigation and found that a similar error occurs in the Admin Console when I try and open the Crystal Report DataSources.
This is the error page that comes up
Server Error in '/businessobjects/Enterprise11/WebTools' Application.
Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.Desktop.Report'.
+Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information
about the error and where it originated in the code.+
+Exception Details: System.InvalidCastException:
Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.Desktop.Report'.+
Source Error:
+The source code that generated this unhandled exception can only be shown when compiled in debug mode.
To enable this, please follow one of the below steps, then request the URL:+
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
<configuration>
   <system.web>
       <compilation debug="true"/>
   </system.web>
</configuration>
+Note that this second technique will cause all files within a given application to be compiled in debug mode.
The first technique will cause only that particular file to be compiled in debug mode.+
+Important: Running applications in debug mode does incur a memory/performance overhead.
You should make sure that an application has debugging disabled before deploying into production scenario.+
Stack Trace:
InvalidCastException: Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.Desktop.Report'.
   +CrystalDecisions.Enterprise.WebContent.WebSamples.DataSources.Common.datasourceInfoFromReports(ArrayList reports) 226
   +CrystalDecisions.Enterprise.WebContent.WebSamples.DataSources.Datasources.Main() 1821
   +ASP.websamples_datasources_datasources_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) 531
   +System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) 98
   +System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) 20
   +System.Web.UI.Page.Render(HtmlTextWriter writer) 26
   +System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) 25
   +System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) 121
   +System.Web.UI.Control.RenderControl(HtmlTextWriter writer) 22
   +System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 2558
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
Any information on how I can fix this is greatly appreciated.
Regards
Paul
Edited by: Paul Griscti on Sep 3, 2008 2:52 AM

I'd try creating a new Application Pool just for running businessobjects and crystalreportviewers11 and nothing else.
Although the apps are .NET, it uses COM Interop for functionality, so using a common app pool with other versions will collide.
Beyond that - if you have a SAP Business Objects support contract - you might open a new SAP Incident ticket.
Sincerely,
Ted Ueda

Uninstalling BPC fails - Reporting server error

Hi,
I am uninstalling BPC 75 SP06, as recommended I deleted all folders related to the tool such as:
Control Panel - Uninstall clients and Server
C: - PC_MS folder
desktop shortcuts
C:> docs and settings > administrator > my documents >PC_MS
C:> SAP Business Objects
After this, I installed again the tool but the error "Cannot COnnect to reporting services server, check your server information".
I havent changed anything !!
Also trying to access to Reporting services inside SQL shows this:
===================================
Cannot connect to BPCDEMO.
===================================
The underlying connection was closed: The connection was closed unexpectedly. (Microsoft.SqlServer.Management.UI.RSClient)
Program Location:
   at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
   at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
   at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
   at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
   at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
   at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
   at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
   at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
What can I do?
Please i need help ASAP
Velázquez

Hi Nilanjan,
Thanx for the response.
The Reporting Service is running, I installed it as "default installation" and everything seems to be ok, the Configure Report Server console shows everything green even Database Setup. Im using just 1 user (default and administrator) because it is a local machine however I rtied to performs a test in the Database Setup tab and I selected "credentials type - windows , account name - administrator , password - xxx"   and it shows "there was a failure applying your change" it seems that the user is not appropiate and I have no idea why.
I tried to reinstall Reporting Services but it doesnt seem to work, I have no idea what to do, please help.
Velázquez

Cannot connect to the reporting server error

Hi,
When trying to process an application, I get the error : "cannot connect to the reporting server".
We have the BPC application server on a machine and DB, SSAS and SSRS (SQL 2008) on another machine.
We don't have a named instance, we use the default one.
If I connect to http://%SQLServer%/reports, it works.
What could be the problem ?
Thank you in advance.

Hi,
we had got the same problem. In the end we:
- Installed RS on the same machine of BPC (Application Server) (please be careful to make a new db if you want to use the same DB Server)
- Configured correctly the server manager to point the new ReportServer
- Edited from SQL Server Management Console the tblAppSetInfo, in order to make the column of the ReportServer of all Application Sets to point to the new report server.
- (not sure was needed) rebooted and restarted all the services
- Tested it and it worked!
HTH
Daniele Tiles

Unable to connect to report server Error: Message : ErrorCode : 10061

I have configured a report server oracle 10.1.0.2 app server on solaris 10. when the user tries to connect through the front end application web he gets the below error:
Type : System.Net.WebException, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=
Message : Unable to connect to the remote server
Source : System
Help link :
Status : ConnectFailure
Response :
Data : System.Collections.ListDictionaryInternal
Inner Exception
Type : System.Net.Sockets.SocketException, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=
Message : No connection could be made because the target machine actively refused it 10.10.1.180:4444
Source : System
Help link :
ErrorCode : 10061
SocketErrorCode : ConnectionRefused
NativeErrorCode : 10061
Data : System.Collections.ListDictionaryInternal
TargetSite : Void DoConnect(System.Net.EndPoint, System.Net.SocketAddress)
Can anyone please let me know which files or conf files I need to look at.
I did not see any errors in the server trace files. The tnsnames look good. They connect to a oracle DB

In the ssl.conf I put the listen port as 4444 ,
but when I go to the OEM of the report server - ports , it does not show me the port used as 4444 , the field is blank.
is there any place I need to make the port change to 4444
thanks

Acuate 7 Report Server Error

Hi All,
We are getting this Error when i Click on a Report in Thin Client.
Please lets us know is there any other configuration required to see the report.
our reports are working fine in thick client but we are not able to see the report in thin client_+
This error is triggered by the Actuate Reports Server in the following cases:
1. The .ROX file or folder does not exist in the Reports Server Encyclopedia or;
2. User does not have privileges to access the .ROX file or folder.
Please have the system administrator check the Reports Server for the .ROX file or folder. If it is found, then administrator should check the privilege settings.(SBL-RPT-00107)'
ProcessRequest ProcessRequestError 1 0 2012-04-09 05:36:29 (Symbolic URL: ReportsServerImmediateJob) Symbolic URL: 'ReportsServerImmediateJob' Argument: '__executableName' is Required.
Its urgent. Please help.
Regards,
Asif Ansari

its been resolved,the issue was with Xmanager software installed on the windows system.Thnax :)

Report Server: Error initializing printer

Oracle Report Server 6.0 for Windows NT doesn't work. When I try to call any report I get next error message:
Error message returned from Reports server:
REP-3002: Error initializing printer.
Please make sure a printer is installed.
The printer is installed on Windows NT server and is default. Where is the error? My URL example:
http://mccrash.eagle.ru/ows-bin/rwcgi60.exe?report=test.rdf+userid=scott/tiger+server=reportsserver+desformat=html+destype=cache
Next URLs work successufully:
http://mccrash.eagle.ru/ows-bin/rwcgi60.exe/help
http://mccrash.eagle.ru/ows-bin/rwcgi60.exe/showenv
http://mccrash.eagle.ru/ows-bin/rwcgi60.exe/showmap
What ideas?
null

Fyi -- in Reports 6i a printer is no longer mandatory. eg if you're only doing web publishing, you don't need to setup a printer and give the Reports server access to it (of course, if you're trying to print from Reports - you need a printer! ;-).
To answer your question, make sure the USER that is running the Reports server as an NT service has access to a printer. If it's the SYSTEM account (goto Control Panel -> Services and double click on the Oracle Reports Server xxxxx entry (where xxxxx is the name of the server) and look at the user account that is running the server. If it's the SYSTEM account, it doesn't have access to a printer, so change it to a user (either local or domain user) that does have printer access.
Regards
The Oracle Reports Team http://technet.oracle.com

Report server error 1075

Similar Messages

Maybe you are looking for