Report to delete OM objects
hello seniors
can anyone help me with report to delete OM objects?
*& Report Z_HRP1000_DELETE
REPORT Z_HRP1000_DELETE.
type-pools truxs.
DATA : it_raw TYPE truxs_t_text_data, "VARIABLES DECLARATION
c_space(1) TYPE c VALUE ' '.
data : begin of it_1000 occurs 0,
objid like hrp1000-objid,
end of it_1000,
wa_1000 like line of it_1000.
data : it_fail like it_1000 occurs 0 with header line.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_file LIKE rlgrap-filename OBLIGATORY.
parameters : p_otype like hrp1000-otype.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM get_file USING p_file. "CALLING F4 HELP FOR D=FILES
START-OF-SELECTION.
PERFORM get_data. "UPLAODING DATA FROM EXCEL
if it_1000[] is not initial.
loop at it_1000 into wa_1000.
delete from hrp1000 where otype = p_otype
and objid = wa_1000-objid.
if sy-subrc <> 0.
it_fail-objid = wa_1000-objid.
append it_fail.
clear it_fail.
endif.
clear wa_1000.
endloop.
endif.
if it_fail[] is not initial.
loop at it_fail.
write : it_fail-objid.
clear it_fail.
endloop.
endif.
*& Form GET_FILE
text
-->P_P_FILE text
form GET_FILE using p_p_file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
CHANGING
file_name = p_p_file
EXCEPTIONS
mask_too_long = 1
OTHERS = 2.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endform. " GET_FILE
*& Form GET_DATA
text
--> p1 text
<-- p2 text
form GET_DATA .
*If no file upload path is mentioned
IF p_file = c_space.
MESSAGE
LEAVE LIST-PROCESSING.
ENDIF.
*Function module for uploading the file
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw
i_filename = p_file
TABLES
i_tab_converted_data = it_1000
EXCEPTIONS
conversion_failed = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
LEAVE LIST-PROCESSING.
ENDIF.
endform. " GET_DATA
Similar Messages
-
Is There A Way To Republish A Report In CMC Without Deleting The Object?
We're using Business Objects Enterprise 11.5 to manage over 700 reports. Right now, whenever a user requests a change to a report (which happens several times a week) we go into CMC and delete the object completely, and create a new one. This seems pretty wasteful.
It seems to me like there should be some "Browse" function somewhere that would allow us to grab an updated .rpt file and replace the current one, but for the life of me I can't find it.That's a pretty lousy design IMO.
No comment
Crystal Reports needs to connect to the CMS, which by default listens on 6400. You can't force it to use another port, unless the CMS also listens on that port.
As for your IT dept not wanting that port open, the Import Wizard, Publishing Wizard, every client tool needs to connect to the CMS on this port (or the port the CMS listens on).
The gist is that Crystal Reports will have to connect to the CMS on 6400 (in your case). -
Project Online - Can't Delete Resource and User from Delete Enterprise Objects
I would like to link a resource account to a user account but I ran into an error: "The resource account
is already in use.". This is a known issue which I attempted to resolve by following the instructions in KB2881398.
However when deleting the selected resource from Delete Enterprise Objects I get a message indicating success ("The
selected Resources and Users have been deleted.") but the duplicate user is still in the listing in Delete Enterprise Objects and when attempting to link the remaining resource to a user logon account I still get the error
"The resource account is already in use."
Why is the user not deleted even though Delete Enterprise Objects reports success and how can I delete these duplicates to be able to successfully link the account?Hi,
This might be due to your Exchange Sync issue, where your project workspace is unable to delete that user from local DB. Try following steps to diagnose the problem:
1) Go to your Resource Pool, DELETE a resource.
2) While resource is being Deleted, open another window
Server Settings -> Manage Queue Jobs
3) Here you can view the progress of your current Resource Deletion update, check if all goes smooth and your Resource is deleted successfully by showing process completion 100% :
( to view any error look at the
last column of table on Manage Queue Job page)
4) Cross check your Resource by running Resource Availability Report.
Basically this will give you a fair idea of your resource deletion problems and how system is responding to it.
Regards -
ALV Tree Report without using ABAP Objects
Hi all,
I want to know the name of a function module to create ALV Tree in SE38 as a report. I am required to create this ALV Tree Report without using ABAP OBJECTS. Can u pls help me as early as possible.Hi
see this link
http://www.sapdev.co.uk/reporting/alv/alvtree.htm
*& Report ZBCALV_TREE
REPORT ZBCALV_TREE.
class cl_gui_column_tree definition load.
class cl_gui_cfw definition load.
data tree1 type ref to cl_gui_alv_tree.
data mr_toolbar type ref to cl_gui_toolbar.
include <icon>.
include bcalv_toolbar_event_receiver.
include bcalv_tree_event_receiver.
data: toolbar_event_receiver type ref to lcl_toolbar_event_receiver.
data: gt_VBAK type VBAK occurs 0, "Output-Table
gt_fieldcatalog type lvc_t_fcat, "Fieldcatalog
ok_code like sy-ucomm. "OK-Code
start-of-selection.
end-of-selection.
call screen 100.
*& Module STATUS_0100 OUTPUT
text
module STATUS_0100 output.
SET PF-STATUS 'MAIN'.
if tree1 is initial.
perform Zinit_tree.
endif.
call method cl_gui_cfw=>flush.
endmodule. " STATUS_0100 OUTPUT
*& Form Zinit_tree
text
--> p1 text
<-- p2 text
form Zinit_tree .
perform Zbuild_fieldcatalog.
create container for alv-tree
data: l_tree_container_name(30) type c,
l_custom_container type ref to cl_gui_custom_container.
l_tree_container_name = 'TREE1'.
if sy-batch is initial.
create object l_custom_container
exporting
container_name = l_tree_container_name
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
if sy-subrc <> 0.
message x208(00) with 'ERROR'. "#EC NOTEXT
endif.
endif.
create tree control
create object tree1
exporting
parent = l_custom_container
node_selection_mode = cl_gui_column_tree=>node_sel_mode_single
item_selection = 'X'
no_html_header = ''
no_toolbar = ''
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
illegal_node_selection_mode = 5
failed = 6
illegal_column_name = 7.
if sy-subrc <> 0.
message x208(00) with 'ERROR'. "#EC NOTEXT
endif.
create Hierarchy-header
data l_hierarchy_header type treev_hhdr.
perform zbuild_hierarchy_header changing l_hierarchy_header.
create info-table for html-header
data: lt_list_commentary type slis_t_listheader,
l_logo type sdydo_value.
perform Zbuild_comment using
lt_list_commentary
l_logo.
repid for saving variants
data: ls_variant type disvariant.
ls_variant-report = sy-repid.
create emty tree-control
call method tree1->set_table_for_first_display
exporting
is_hierarchy_header = l_hierarchy_header
it_list_commentary = lt_list_commentary
i_logo = l_logo
i_background_id = 'ALV_BACKGROUND'
i_save = 'A'
is_variant = ls_variant
changing
it_outtab = gt_VBAK "table must be emty !!
it_fieldcatalog = gt_fieldcatalog.
create hierarchy
perform Zcreate_hierarchy.
add own functioncodes to the toolbar
perform zchange_toolbar.
register events
perform zregister_events.
endform. " Zinit_tree
*& Form Zbuild_fieldcatalog
text
--> p1 text
<-- p2 text
form Zbuild_fieldcatalog .
get fieldcatalog
call function 'LVC_FIELDCATALOG_MERGE'
exporting
i_structure_name = 'VBAK'
changing
ct_fieldcat = gt_fieldcatalog.
sort gt_fieldcatalog by scrtext_l.
change fieldcatalog
data: ls_fieldcatalog type lvc_s_fcat.
loop at gt_fieldcatalog into ls_fieldcatalog.
case ls_fieldcatalog-fieldname.
when 'AUART' .
ls_fieldcatalog-no_out = 'X'.
ls_fieldcatalog-key = ''.
endcase.
modify gt_fieldcatalog from ls_fieldcatalog.
endloop.
endform. " Zbuild_fieldcatalog
*& Form zbuild_hierarchy_header
text
<--P_L_HIERARCHY_HEADER text
form zbuild_hierarchy_header changing
p_hierarchy_header type treev_hhdr.
p_hierarchy_header-heading = 'Hierarchy Header'. "#EC NOTEXT
p_hierarchy_header-tooltip =
'This is the Hierarchy Header !'. "#EC NOTEXT
p_hierarchy_header-width = 30.
p_hierarchy_header-width_pix = ''.
endform. " zbuild_hierarchy_header
*& Form Zbuild_comment
text
-->P_LT_LIST_COMMENTARY text
-->P_L_LOGO text
form Zbuild_comment using
pt_list_commentary type slis_t_listheader
p_logo type sdydo_value.
data: ls_line type slis_listheader.
LIST HEADING LINE: TYPE H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: NOT USED FOR THIS TYPE
ls_line-info = 'ALV-tree-demo: flight-overview'. "#EC NOTEXT
append ls_line to pt_list_commentary.
STATUS LINE: TYPE S
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = 'valid until'. "#EC NOTEXT
ls_line-info = 'January 29 1999'. "#EC NOTEXT
append ls_line to pt_list_commentary.
ls_line-key = 'time'.
ls_line-info = '2.00 pm'. "#EC NOTEXT
append ls_line to pt_list_commentary.
ACTION LINE: TYPE A
clear ls_line.
ls_line-typ = 'A'.
LS_LINE-KEY: NOT USED FOR THIS TYPE
ls_line-info = 'actual data'. "#EC NOTEXT
append ls_line to pt_list_commentary.
p_logo = 'ENJOYSAP_LOGO'.
endform. " Zbuild_comment
*& Form Zcreate_hierarchy
text
--> p1 text
<-- p2 text
form Zcreate_hierarchy .
data: ls_vbak type vbak,
lt_vbak type vbak occurs 0.
get data
select * from vbak into table lt_vbak
up to 200 rows . "#EC CI_NOWHERE
sort lt_vbak by AUART.
add data to tree
data: l_AUART_key type lvc_nkey.
loop at lt_vbak into ls_vbak.
on change of ls_vbak-AUART.
perform Zadd_AUART_line using ls_vbak
changing l_AUART_key.
endon.
endloop.
calculate totals
call method tree1->update_calculations.
this method must be called to send the data to the frontend
call method tree1->frontend_update.
endform. " Zcreate_hierarchy
*& Form Zadd_AUART_line
text
-->P_LS_vbak text
-->P_0379 text
<--P_L_AUART_KEY text
form Zadd_AUART_line using p_ls_vbak type vbak
p_relat_key type lvc_nkey
changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value,
ls_vbak type vbak.
set item-layout
data: lt_item_layout type lvc_t_layi,
ls_item_layout type lvc_s_layi.
ls_item_layout-t_image = '@3P@'.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
ls_item_layout-style =
cl_gui_column_tree=>style_intensifd_critical.
append ls_item_layout to lt_item_layout.
add node
l_node_text = p_ls_vbak-AUART.
data: ls_node type lvc_s_layn.
ls_node-n_image = space.
ls_node-exp_image = space.
call method tree1->add_node
exporting
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
i_node_text = l_node_text
is_outtab_line = ls_vbak
is_node_layout = ls_node
it_item_layout = lt_item_layout
importing
e_new_node_key = p_node_key .
endform. " Zadd_AUART_line
*& Form zchange_toolbar
text
--> p1 text
<-- p2 text
form zchange_toolbar .
get toolbar control
call method tree1->get_toolbar_object
importing
er_toolbar = mr_toolbar.
check not mr_toolbar is initial.
add seperator to toolbar
call method mr_toolbar->add_button
exporting
fcode = ''
icon = ''
butn_type = cntb_btype_sep
text = ''
quickinfo = 'This is a Seperator'. "#EC NOTEXT
add Standard Button to toolbar (for Delete Subtree)
call method mr_toolbar->add_button
exporting
fcode = 'DELETE'
icon = '@18@'
butn_type = cntb_btype_button
text = ''
quickinfo = 'Delete subtree'. "#EC NOTEXT
add Dropdown Button to toolbar (for Insert Line)
call method mr_toolbar->add_button
exporting
fcode = 'INSERT_LC'
icon = '@17@'
butn_type = cntb_btype_dropdown
text = ''
quickinfo = 'Insert Line'. "#EC NOTEXT
set event-handler for toolbar-control
create object toolbar_event_receiver.
set handler toolbar_event_receiver->on_function_selected
for mr_toolbar.
set handler toolbar_event_receiver->on_toolbar_dropdown
for mr_toolbar.
endform. " zchange_toolbar
*& Form zregister_events
text
--> p1 text
<-- p2 text
form zregister_events .
define the events which will be passed to the backend
data: lt_events type cntl_simple_events,
l_event type cntl_simple_event.
define the events which will be passed to the backend
l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_checkbox_change.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_click.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_keypress.
append l_event to lt_events.
call method tree1->set_registered_events
exporting
events = lt_events
exceptions
cntl_error = 1
cntl_system_error = 2
illegal_event_combination = 3.
if sy-subrc <> 0.
message x208(00) with 'ERROR'. "#EC NOTEXT
endif.
set Handler
data: l_event_receiver type ref to lcl_tree_event_receiver.
create object l_event_receiver.
set handler l_event_receiver->handle_node_ctmenu_request
for tree1.
set handler l_event_receiver->handle_node_ctmenu_selected
for tree1.
set handler l_event_receiver->handle_item_ctmenu_request
for tree1.
set handler l_event_receiver->handle_item_ctmenu_selected
for tree1.
endform. " zregister_events
*& Module USER_COMMAND_0100 INPUT
text
module USER_COMMAND_0100 input.
ok_code = sy-ucomm.
clear sy-ucomm.
case ok_code.
when 'EXIT' or 'BACK' or 'CANC'.
perform Zexit_program.
when others.
call method cl_gui_cfw=>dispatch.
endcase.
clear ok_code.
call method cl_gui_cfw=>flush.
endmodule. " USER_COMMAND_0100 INPUT
*& Form Zexit_program
text
--> p1 text
<-- p2 text
form Zexit_program .
call method tree1->free.
leave program.
endform. " Zexit_program
<b>Reward if usefull</b> -
How to delete webintelligence objects that are not viewed
Hi,
I need to find a way to delete the objects that have not been viewed in the last 12 months. We are using Business Objects XI 3.1 here. I've already looked for this feature around a lot of sites and foruns, but I still have not found anything.
We have over than 2.500 webintelligence objetcs in our environment. A lot of them are useless. So we would like to clean up the reports that are not viewed by the users. Maybe we would use this feature one time every year.
Thanks in advance,
Gustavo BorgesWe decided to clean up the old documents taking a look to their last modified date. It'll be easier and we won't loose important documents. That is gonna be enough for us.
Thanks,
Gustavo Borges -
Log for Addition/Deletion of object in a Transport Request
Dear Friends,
Recently I had a issue where I tried deleting an object from a transport request and I got the message that object is deleted successfully.
But when the transport was imported then it failed with Sy-subrc 8 because of the same object in transport. The reason for the same could be :
1.) Either the object was not deleted from the transport request.
2.) Or Some one else added the same object again in the request.
I want to read the log of this transport in such a way that I see when a object has been added/deleted from a transport request along with SAP User ID of the person doing it.
Is this possible ? If so kindly share the steps with me.
Thanks a Lot for your kind help!!! This is very important for me....
Regards,
LalitHello Lalit
I hope nothing of that sort is available as the transport requests will again have tasks under them.
The changes done to the task will have to be tracked in that case but SAP doesn't have that task change logging as far as I know.
All E0* tables relates to transports and objects under these transports none of them have logs on this nor even any transactions which allow user to edit the transport object.
You get an action log which provides who created it and who releaed them.
But if you configure CharM on Solution manager I hope you can track each changes.
Regards
Vivek -
Report for deleted line-items in Transfer Orders
Dear All,
Please help me in writing the code for "Report for deleted line-items in Transfer Orders".
regards,
nishuThanks. Repor completed.
-
Report to delet production orders
Hi guys,
help needed!
Does anybody of you know a report to delete production orders completely?
Such on as the RMMMDE00, which deletes all material of the current client.
Hoping for an answer,
BarbaraHi,
I guess the below link will help you to some extent....
http://www.sap-img.com/production/how-to-delete-old-production-orders.htm -
Error in FM DDIF_NAMETAB_GET when deleting BI objects via transport request
Dear all,
when importing a transport request in which several types of BI objects are deleted (Infocubes, DSO's, transformations, routines, DTP's, query elements, infosets, process chains). The import terminates only when transporting from acceptance to production with return code 12 due to an uncaught exception:
Transporting from development to acceptance did not raise this exception.
The ST22 dump (see below) refers in the "contents of system fields" section to a DSO, and to post-import activities. The DSO and the associated tables could not be found (rsa1 & se16), since they are deleted as desired.
Some of the relevant notes that I have found do refer to DSO related problems, but they all indicate to install SP19 which we already have installed (BW 7.0 Patch Level 23)
Could you please assist in pointing out potential solutions based on the information from the ST22 Runtime Error below?
Kind regards,
PJ
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_RS_PROGRAM_ERROR
Date and Time 08.02.2011 10:48:14
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_RS_PROGRAM_ERROR' was raised, but it was not caught anywhere
along the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSDD_DS====================CP' has to be
terminated.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RS_PROGRAM_ERROR', was not caught
and therefore caused a runtime error.
The reason for the exception is:
Error in BW: Error in DDIF_NAMETAB_GET
How to correct the error
If the error occurs in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_PROGRAM_ERROR"
"CL_RSDD_DS====================CP" or "CL_RSDD_DS====================CM001"
"APPEND_DS_TEC_FIELDS"
System environment
SAP-Release 700
Application server... "dp1ci"
Network address...... "<removed>"
Operating system..... "HP-UX"
Release.............. "B.11.23";
Hardware type........ "ia64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 45
Shortdump setting.... "full"
Database server... "spisap02"
Database type..... "ORACLE"
Database name..... "DP1"
Database user ID.. "SAPBIW"
Terminal................. " "
Char.set.... "C"
SAP kernel....... 700
created (date)... "Dec 14 2009 20:47:35"
create on........ "HP-UX B.11.23 U ia64"
Database version. "OCI_102 (10.2.0.1.0) "
Patch level. 236
Patch text.. " "
Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
SAP database version. 700
Operating system..... "HP-UX B.11";
Memory consumption
Roll.... 5979936
EM...... 0
Heap.... 1459888
Page.... 40960
MM Used. 6988880
MM Free. 415648
User and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Transactions ID..... "4D5111661004210BE10000000AFA2502"
Program............. "CL_RSDD_DS====================CP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "CL_RSDD_DS====================CP" -
in "APPEND_DS_TEC_FIELDS".
The main program was "RDDEXECU ".
In the source code you have the termination point in line 61
of the (Include) program "CL_RSDD_DS====================CM001".
The program "CL_RSDD_DS====================CP" was started as a background job.
Job Name....... "RDDEXECL"
Job Initiator.. "DDIC"
Job Number..... 10475900
Source Code Extract
Line SourceCde
31 RAISE EXCEPTION TYPE cx_rs_program_error
32 EXPORTING
33 text = 'Invalid DSO subtype'. "#EC NOTEXT
34 ENDCASE.
35
36 * get table name from DDIC
37 CALL METHOD cl_rsd_odso=>get_tablnm
38 EXPORTING
39 i_odsobject = n_infoprov
40 i_tabt = l_tab
41 IMPORTING
42 e_tablnm = l_tablnm
43 EXCEPTIONS
44 OTHERS = 1.
45
46 IF sy-subrc <> 0.
47 RAISE EXCEPTION TYPE cx_rs_program_error
48 EXPORTING
49 text = 'Error in CL_RSD_ODSO=>get_Tablnm'. "#EC NOTEXT
50 ENDIF.
51
52 CALL FUNCTION 'DDIF_NAMETAB_GET'
53 EXPORTING
54 tabname = l_tablnm
55 TABLES
56 dfies_tab = l_t_comp
57 EXCEPTIONS
58 not_found = 1
59 OTHERS = 2.
60 IF sy-subrc <> 0.
>>>>> RAISE EXCEPTION TYPE cx_rs_program_error
62 EXPORTING
63 text = 'Error in DDIF_NAMETAB_GET'. "#EC NOTEXT
64 ENDIF.
65
66
67 ELSE.
68 * model table only needed for standard datastore objects, for
69 * write optimized DSOs target table is a changelog that is fully described by
70 * dta_pro (infoobjects)
71 CHECK n_s_dta-odsotype = rsdod_c_type-standard.
72
73 * get model table fields to add
74 CALL METHOD cl_rsd_odso=>get_mod_tab
75 IMPORTING
76 e_mod_fld_ur = l_t_comp.
77 ENDIF.
78
79 * according to T.B. ( 13.04.2007) the correct position is
80 * not needed in the D version
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Post-Import Methods and XPRAs for Transport Request
SY-MSGTY E
SY-MSGID DA
SY-MSGNO 300
SY-MSGV1 /BIC/AV_AMOFCB40
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20110208
SY-UZEIT 104759
SY-XPROG SAPLSYST
SY-XFORM SYSTEM_HOOK_OPEN_DATASETHi All
We are also experiencing this same error when transporting deletions of multiple objects.
Although the transport was cancelled in the destination system (production) it appears to have largely deleted all objects successfully except for DSOs.
The DSOs still appear in the table RSDODSO (via SE11) but are not visible anywhere else. When you try to view the DSO via RSDODS a warning appears saying "DataStore object to be deleted by transport -> delete only allowed". If you try to delete them in this transaction the same ABAP runtime error as the transport appears.
Any assistance would be greatly appreciated!
Regards
David -
Report on deleted workstations
Is it possible to run a report on deleted workstations in ZCM 10.2. This could be done in ZAM7.5 and was a standard report.
Should we be retiring devices now as opposed to deleting obsolete inventory?
ie run a report where device=deleted
I don't seem to be able to find this in ZCM10.ahennessy,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
How to delete all objects in a package?
Hello,
I've seen a similar question here. But is there a tool or a smart way to delete all objects in a dev class or a transport request?
Best Regards
VolkerThese are really 3 questions??
1. To delete objects in a request there are a number of ways, here is one:
Position cursor on modifiable request.
Double click on request and choose 'Objects' tab
Choose object line you want to delete and click 'Delete'
Save your changes.
2. To delete objects in a Dev Class:
Go to work bench --> edit object, Class and give your class name, you will see delete option at the bottom of the screen.
3. How to delete all objects in a package:
here is a link with the steps you need for this: http://benxbrain.com/en/index.do?onInputProcessing(brai_object_thread)&001_threadid=0000161442&sysid=WP5&pgmid=R3TR&object=DOMA&obj_name=DEVCLASS&child_param= -
Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.This thread is pretty old, are you still having this issue?
-
Deletion of Object Dependency in BOM
Hi All,
I am trying to delete the Object dependency from a BOM using the Function Module "CUKD_API_ALLOCATIONS_MAINTAIN". After executing it, the Object is getting deleted but the Bulb like symbol for Obj(Object Dependency) in Transaction CEWB is not disabling. Please help me in this.
Thanks
VinaySolved
-
Deletion of Objects in ABAP Workbench
Hi,
I want do delete an self defined interface in the ABAP Workbench. But for some reason it is not possible to delete this interface, although its not used anywhere. I got the message
Object cannot be edited with Class Builder
Message no. OO612
But where else should I delete the interface if not in the class builder or in the workbench?
Any ideas how to solve this problem?Good day,
I also ran into this issue when trying to deploy some wd objects with SAPlink.
I managed to delete the objects by using the "OO_INTERFACE_DELETE" function module. There is also a function module called "OO_CLASS_DELETE" to delete classes.
In either case you just populate the parameters in the following way:
INTERFACE (or CLASS) = <your class\interface name>
COMMIT = 'X'
FORCE = 'X'
Hope this helps.
Regards,
Shaun -
Looking for a tool to search text fields in about 1000 reports installed on Business Objects Xi R3
Hi,
i am looking for a tool, program that can search all our reports installed on Business Objects Xi R3 for specific content in text fields and formulas.
We used a couple of years ago .rpt inspector, that worked pretty well for our purpose.
Unfortunately this is Win XP & Win Server 2003 only, so we can't reuse it anymore.
(I know there are way of getting WinXP that in a VMware, but that is not an option in our company.)
So i am interested , if there is another tool out there, which can help us?
regards Alex
btw we are using Business Objects XI R3 (SP7) with reports deisgned on crystal reports designer 2008Hi,
i am looking for a tool, program that can search all our reports installed on Business Objects Xi R3 for specific content in text fields and formulas.
We used a couple of years ago .rpt inspector, that worked pretty well for our purpose.
Unfortunately this is Win XP & Win Server 2003 only, so we can't reuse it anymore.
(I know there are way of getting WinXP that in a VMware, but that is not an option in our company.)
So i am interested , if there is another tool out there, which can help us?
regards Alex
btw we are using Business Objects XI R3 (SP7) with reports deisgned on crystal reports designer 2008
Maybe you are looking for
-
InDesign wont start anymore?
My InDesign wont start anymore. It Works fine on administrator user I have tried to reinstall it. I have Windows 7 pc joined a domain. I have tried to delete lst files
-
Will a mini dp work in my thunderbolt output slot on my MBPro?
Will a mini dp work in my thunderbolt output slot on my MBPro?
-
Hi all, I have the following sequence CREATE SEQUENCE TROIA.SEQID_CIDSMENSAGEM START WITH 1 MAXVALUE 999999999999999999999999999 MINVALUE 1 NOCYCLE CACHE 20 NOORDER; using sqlplus each time i issue the following sql: select troia.seqid_cidsmensagem.n
-
Takes out of alignment within track
I'm using Logic Express 8. I recorded a vocal track a couple of days ago. When I went to comp the takes today, some of the takes were no longer aligned with the piano. The ones that were off were consecutive and appear to be off by the exact same amo
-
Hi Yesterday when I tried to see the scorecard tab in the end user interface, I get an error saing: "error quering PAS database dat194: none selected variables: restore original variable selection. " Can you help me? This is strange because I don't