Report to list all POs & value contracts in a cost center

Hi,
Our client wants a report to pull all the POs and value contracts that are associated with a cost center. This particular cost center has been closed down. So the client is asking for a report from SAP that lists all the open POs and value contracts associated with the old cost center so that the cost center can be updated to the new one.
Can anyone please advise on this issue?
Thanks

Please make use of ME2K , specify the cost centers , purch org and Scope of lIst :- BEST.
The problem would be that the system does a calculation in order to find whether the order is still open or not in case of of partial receipts/invoice.

Similar Messages

  • Report to list all computers and their collection membership

    Hi
    I am currently working on a site where direct membership is used for collections but a need has arisen to move to AD Queries.
    I have created a simple powershell script that creates groups based on the contents of a csv file and another script which populates this with the members listed in another csv file.
    To help speed up the process is there a way to generate a report that lists ALL Computers and their Collection membership?
    The only reports I seem to find that are built in require an inputted value of either computer name of collection ID. I simply need a report that lists Computer Name is column 1 and Collection Name in column 2 for all computers and all collections.
    Many Thanks,
    Matt Thorley

    select 
    FCM.Name,
    C.Name
    from 
    dbo.v_Collection C
    join dbo.v_FullCollectionMembership FCM on C.CollectionID = FCM.CollectionID
    Thanks to Garth for original query. I just modified it :)
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

  • Create report to list all computers with chrome or mozilla browser al editions

    Hi All,
    I have SCCM 2007 R3 and I need to create report to list all computers with chrome or Mozilla browser all editions. any help?
    Thanks,
    Kareem Behery

    The above one is SMS collection query. For SQL report you may try the below query: 
    query for IE 10
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client
    from SMS_R_System inner join SMS_G_System_SoftwareFile on SMS_G_System_SoftwareFile.ResourceID
    = SMS_R_System.ResourceId where SMS_G_System_SoftwareFile.FileName
    = "iexplore.exe" and SMS_G_System_SoftwareFile.FilePath
    like "%prog%internet%" and SMS_G_System_SoftwareFile.FileVersion
    like "10.%"
    query for IE 9
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client
    from SMS_R_System inner join SMS_G_System_SoftwareFile on SMS_G_System_SoftwareFile.ResourceID
    = SMS_R_System.ResourceId where SMS_G_System_SoftwareFile.FileName
    = "iexplore.exe" and SMS_G_System_SoftwareFile.FilePath
    like "%prog%internet%" and SMS_G_System_SoftwareFile.FileVersion
    like "9.%"
    query for IE 10
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client
    from SMS_R_System inner join SMS_G_System_SoftwareFile on SMS_G_System_SoftwareFile.ResourceID
    = SMS_R_System.ResourceId where SMS_G_System_SoftwareFile.FileName
    = "iexplore.exe" and SMS_G_System_SoftwareFile.FilePath
    like "%prog%internet%" and SMS_G_System_SoftwareFile.FileVersion
    like "11.%"

  • A report that lists all non-exempt employees that do not have a supervisor

    HI all,
    Please help. This is urgent.
    bold "A report that lists all non-exempt employees that do not have a supervisor assigned in R/3." bold
    I have already selected non-exempt employees but don't know how to select people who do not have a supervisor" What selection criteria I should choose in the ad-hoc query
    Thanks a bunch,
    Rashmi

    Hi
    Actually its not that difficult. You can give a criteria in selection where relationship A002 is equal to a space . Replace A002 in this example with the relatioship you have defined for 'Reports(line) to'.
    Regards
    Waz

  • T code/ report to list all material sales pricing condition with deletion i

    I create sales org/ material level pricing conditions in VK11. Some unwanted material pricing conditions are with Deletion indicator active. Iu2019m looking for a report to list all material sales pricing condition with deletion indicator active.
    Please advice me on this.

    Hi Goto v/ld and select 16 which stands for individual prices, and then populate sales organization, distribution channel, customer ,material numbers,etc...and tick "Cond.marked for deletion" check box in "list screen" tab which is the most important, execute you will be able to see all material pricing condition even though it had been deleted.

  • Report to list all infotype record per employee

    Hi All
    is there a report that list all infotypes record per employee  ?
    thanks for helping
    Corinne

    Hi,
    It will not be feasible as all the IT has different fields.
    There is no standard report as Mr, Raghu mentioned.
    Ketul

  • To show report which list all Accounts with no activity associated with it

    Hi
    1) Is it possible to show report which list all the accounts which do not have any activity associated with it?
    2) A report which shows All the accounts with Activity ( Even though there is no activity associated with it)
    Quick reply appreciated

    Hi Rits,
    You can achieve this using combine analysis. Create two reports and in the first one make the Activity Id blank, In the second report keep it as it is and do union of both the analysis.
    This will give you all the accounts which have/have not Activities associated with them.
    Hope it helps,
    Thanks,
    Mayank

  • Report Painter - How to identity statistical orders in a Cost Center Report

    Hello,
    currently I am in the process of building a cost center report based on reporting tabel CCSS.
    This report should list all primary and secondary costs which are charged to a specific cost center/cost center group .
    The cost center or cost center group is given in the general data selection.
    All direct primary cost postings are identified in rows like this:
    - Cost Element (SET): cost element group A1, A2,...Axx
    - Business Transaction Type: COIN
    All primary cost postings deriving from (real) internal orders are identified like this:
    - Cost Element: 1 to 9999999999
    - Business Transaction: KOAO
    - Partner object number: 0 to 99999999
    Now here is the problem:
    The controlling department requests to identify all primary cost postings  to the given cost center which have been postet to a statistical internal order at the same time.  The most part of the primary costs have been directly postet to the cost center in the Additioanal Account Assignments. But some have been posted to the cost center and at the same time to a statistical internal order.
    Looking into BSEG I can quickly identify these line items as they have a value in BSEG-KOSTL and BSEG-AUFNR.
    How can I select these items in a report painter report?
    I would like to separate all items whith connection to statistical int. orders from those with no connection to internal ordes.
    Thanks for your help!

    Dear Elli,
    Dear SAP-Gurus,
    once again, thank you for your quick reply.
    You hints and remarks are very much appeciated.
    My problem seems to be slightly more complicated than what I had expected.
    All postings to the cost center/cost center group are actual postings. The cost center is the "real" cost element, there are no postings of value type 11 here.
    Most postings have the cost center as the only cost element, but others additionally mention a statistical order.
    My goal is to seperate those postings to the cost center [as (real) cost element] plus the statistical order from those with only the cost center.
    I would also like to sort these postings by the order number.
    I could easily write two reports:
    One  for the cost center and another one only for the statistical orders. The latter would use value type parameter 11 (as you proposed!). Unfortunately, I do not know all order numbers tied to the cost center. As table BSEG is not suitable for SAP Query,  I  run into deep problems here.
    I know I have problem in the design of my report here and  I would like to sort out, which options I have.
    Is Report Painter a suitable tool for me here anyway?
    Thanks again!
    Karsten

  • Report for list of POs for with Invoice has not been posted

    Hi All
    Can anybody tell me the report for list of PO' for which GR has already been done but Invoice is not posted
    Thnks
    Ranjith

    Hi
    Try Report ME2M,
    With input selection parameter  "WE101".
    Hope this helps.
    Harish

  • Std. Transaction / Report to List all PO's with no invoice posting

    Hi All,
    I would like to know is there a standard transaction or report, which lists out all PO's for which goods receipt has been done, but invoice posting has not been done?
    Vivek

    Hi All,
    Thanks for your inputs,
    1. MR11 - Can you please let me know what input conditions do i have to give, to view only those PO's for which GR is done & Invoice not posted, because when i run this transaction it is showing all PO's which have invoice posted as well.
    2. ME2M - I am not able to select the dynamic selection option, it is in grey, how do i activate it?
    3. ME80FN - This gives a list of PO's line wise, but what i need is all PO lines for which GR is done, but no invoice posted.
    Await inputs.
    Vivek

  • How to avoid report running for all the values in roll up of guided naviga

    Hi
    Thanks in Advance
    I have 3 reports on three different pages of a dashboard. (Implemented guided navigation on one column of each report).When I click on value of guided navigation column it guides me to report 2 for that particular value (is prompted), same way for 3 report also till here it works fine.
    However when I return from report 3 to report 2 and 2 to 1, the reports are running for all the values instead for the value which was passed by guided navigation of previous report earlier (Value on which I clicked to pass to the next report).
    Edited by: 808623 on Nov 9, 2010 2:10 AM

    Yes
    Example : If i click on values 'X' in report 1
    Report 2 shows results for 'X' only. And if i click on Value say 'Y' in 2 then report 3 shows for only 'Y'. But when i rollup from 3 to 2, Report 2 is showing for all values rather than showing 'x'.
    I'm using Link or Image Dashboard Object > Destination>Request or Dashboard (path of previous report)
    Edited by: 808623 on Nov 9, 2010 2:37 AM

  • Material Attribute value display based on cost center value

    Hi,
    Is it possible to display the material attribute value based on cost center value. I mean for some cost centers I would like to display the value of other characteristic in place of material attribute. I am trying to create a query on MP.
    Any info in this regard will be appreciated.
    Thank you.
    Harshan

    Hi Adi,
    In Rows, Create a struture. Using New Selection, You can restrict the New Value to the cost center (Restrict again on those some cost centers) and material. And for this New Characteristic, you can have a attribute.

  • Report with based on Asset number with repartition by cost center

    Hi everybody,
    I am looking for an asset report (standard one if possible but I did not find it):
    I want to extract assets per cost center and to have also the original asset number (ANLA-AIB1N).
    I know I can do that with SQVI or a query (SQ01) but this is quite ressources consuming and before to go that way I am looking for a standard report.
    Thanks in advance.

    Hello,
    it's almost what I am looking for, in dynamic selection I have the original asset number (AIB1N) but this number is not bring back in the result displayed.
    The aim of the report I am looking for is to display Asset number, Cost center, Original asset number.
    Thanks in advance

  • Problem with Crystal Reports not displaying all parameter values

    Hello,
    A co-worker of mine is developing a report in Crystal version 11.5.8.826.  One of the requirements from his user is that they would like to select from a list of users for applicable criteria to appear in the report.  He created a parameter with a dynamic list of values, entered prompt group text, selected "existing" as the data source (and chose the corresponding field from the table).  This dropped the UserID field into the "value" field in the table and linked the table to the parameter.  We selected "allow multiple values" as "true" and "allow discrete values" as "true". 
    Here is the problem.  When Crystal prompts us to select the parameters, it doesn't show all of the applicable list of users (it shows 8 out of 12 users).  When we run the query in a standalone sql generating tool (Toad or Golden), we see the full list of users.  Crystal Reports appears to be filtering the selection list of users for some unknown reason.  We have tried changing most every option that we could find within the parameter, but no luck. 
    The problem definitely appears to lie within the parameter- if we run the report without the parameter, we see the full list of users.  Once we add the parameter and attempt to select one or many users, the problem appears.
    Any thoughts?  What am I missing?  Any help is appreciated.
    thanks,
    Noel

    I'll answer my own question in case somebody is curious or happens to find this message via google or another search engine.  See this link.  You need to set your upper threshold within your Registry Editor.
    http://www.crystalreportsbook.com/Forum/forum_posts.asp?TID=8029

  • Report for listing all document flow for SD

    Hi expert,
    do you know any report from SAP or you have any sample report that can display and show all document flow for SD in one line...
    let say in selection screen i have contract number... so when i key in by contract number all detail and flow will display e.g
    conract  2000001 service order 3000000 delivery 4000000 invoice 5000000
    thanks.
    [SAP Notes & Tips|http://abap4beginner.blogspot.com/]

    hi,
    thanks for the solutions. Did others have experience on this situation?
    Thanks.
    [Abap Notes & Tips|http://www.abap4beginner.blogspot.com/]

Maybe you are looking for