Material Attribute value display based on cost center value

Hi,
Is it possible to display the material attribute value based on cost center value. I mean for some cost centers I would like to display the value of other characteristic in place of material attribute. I am trying to create a query on MP.
Any info in this regard will be appreciated.
Thank you.
Harshan

Hi Adi,
In Rows, Create a struture. Using New Selection, You can restrict the New Value to the cost center (Restrict again on those some cost centers) and material. And for this New Characteristic, you can have a attribute.

Similar Messages

  • Display descriptions of cost center and G/L account in ME51N/ME52N/ME53N

    Hi Experts,
    Can any one suggest that how to display descriptions of cost center and G/L account in account assignment subscreen- ME51N / ME52N / ME53N.
    Thanks in Advance...
    Siva

    hi
    if the field is required then u have to enter them manually
    so if this are not required then goto OKB9 here give the default cost center for the Gl acct

  • Cost Center values of POs

    hi,
    i want to get the cost center values for all POs. in BBP_PD i could see the cost center assignment values under table BBP_PDACC.
    i'm not able to link this table with CRMD_ORDERADM_H & CRMD_ORDERADM_I  tables.
    i found one FM BBP_ACCOUNT_MULTI_GETDETAIL but this accepts only one header guid.
    but primaraly i want to fetch directly from the table.
    Please let me know how i can link the CRMD_*  tables with BBP_PDACC.
    thanks,
    gupta.

    its got resolved.
    CRMD_ORDER_ADM_I->CRMD_LINK->BBP_PDACC
    thanks,
    gupta.

  • SAP report which display PO nos based  on cost center, Internal orders

    Hi.
    I am looking for a report in MM which will display the list of purchase orders for a cost center, Internal orders etc.
    The report output should have ALV grid format,The output of the report should have material no or short text, PO quantity, PO Price, PO value. GR qty, GR value,IR qty, IR value, G/L to which consumption has posted etc.
    Reports ME2K, MB5S, ME80FN do not show the G/L account to which GR value is posted.
    Basically I am looking for a existing report which is readily available.

    Hi
    I dont think there is standard report. we have developed custom report one of my previous project.
    YOu can try a abap query using tables EKKO, EKPO, EKBE and EKKN.
    regards
    Srinivas

  • Cost Center value

    Hi all
    Can any one  explain me one thing in same connection of cost center
    At what time cost is captured at cost center in the below flow, please correct me if I am wrong
    At the time of GR
    Material A/C Dr
    To GR/IR
    At the time of IR
    GR/IR Ac Dr
    To vendor
    Issue material  to production order
    Material Consumed
      To Material
    Received from Production order
    Finish Good Inventory A/c Dr
    To cost of finish good  cr
    At the time of PGI
    COGS
    Finish Good Inventory
    At time of billing
    Customer A/C Dr
    To Revenue
    Now at what level cost center is effected im not able to understand.
    Please clear my doubt. because in every place i find orders (in purchase and sales order).
    If i see cost center report i will not find any value related to above.
    Thanks in advance
    Shyam

    Thanks for reply,
    as you told that Cost Centers are normally used for Overhead cost management, while direct material costs in production environment do not flow via Cost Centers.
    So can you please tell me what is difference beteween Cost center and order, as both are use for capturing costs
    Regards
    Shayam
    Edited by: Shayam_210 on Oct 20, 2009 12:36 PM

  • Find the KOSTL(cost center) value using coing group and coding code

    Hi,
        Can we get the value cost center Kostl by using coding code and coding group. As per the requirement the coding group is specified in the table qmel-qmgrp and the coding code is qmel-qmcod.. So by using this values only can we get the KOSTL value..Please do help me in this regard.

    so the thing is for the particular coding group QMGRP we have the coding codes QMCOD assigned to it and for the transaction QM01 we cannot have the notification number (as this number is generated only after the transaction is completed)only the notification type is specified in first screen after we press enter a subscreen with Production order number is specified press enter,
    later in the first tab strip specify any material number and also plant number later the defect location and defect type, later in the subject tab strip in the coding group we get the F4 help for the coding code and group,there by picking any of the elements we also get the KOSTL value in text so i was just worried where can we get this value i have checked for the options that u have specified but this doesn't work for me...
    Thanx and reply me back(very Urgent)

  • URGENT ( To put a validation in Purchase requistion based on Cost center)

    Dear All,
    I require to put a validation in purchase requistion, based on user and cost center.
    Each user is assigned to one cost center, and that particular user must be allowed to input or change only that cost center in the purchase requistion.That is by default based on the user the cost center field must be filled in purchase requistion.
    thanks.....
    Deepak

    Dear Deepak,
    <b>That is by default based on the user the cost center field must be filled in purchase requistion.</b>
    You can maintain this by maintaining proper value for parameter ID of cost center in the user record.
    <b>Each user is assigned to one cost center, and that particular user must be allowed to input or change only that cost center in the purchase requistion.</b>
    You can achieve this by maintain proper authorization for the user.
    Hope this will help.
    Regards,
    Naveen.

  • Doesn't save Cost Center values

    Hi experts ,
    I have an issue with cost center,When I have a cost center in product envi in the Headcount application.I am trying to post values against cost center for employees.
    But its not saved in the DB.I have crosss checked all the locks and tried to replicate this isue in our test sys,but it doesn't replicate.Please advise.
    Ravi

    Hi,
    I would request you to follow few things.
    1. Check the member access profile for the problematic User ID. Make sure that the ID has the write access to the members of the secured dimensions.
    2. Full optimize the application, so that the FactWB table is empty.
    3. Now run the input schedule with the problematic ID and post records. After this, open the factWB table and compare the records.

  • Employee benefit costs are not splitting based on Cost Center/InternalOrder

    Good Afternoon!
    I'm having an issue with Employee benefit costs that are not splitting based on the cost center/Internal order splits entered on the timesheet. This was discovered while running the cost center report: PC00_MNA_CC_ADM.
    For example- this employee has one cost center stored on the Infotype 0001 Organizational Assignment. No other overriding cost distribution set up on IT0027 Cost Distribution. Also, no other setup on OM- HRP1018 Cost Distribution.
    Then, on the timesheet, 70 hours of regular time were recorded on the attendance type 2REG and also 10 hours of regular time (also 2 REG) were charged to a different cost center.
    Then on the report the Health/Life section are not coming out correctly. On the original cost center from IT0001, the following amounts are shown: ER Dental, Posting Prescription, PPKP Posting, BN Posting Adm Fee, ER cr Flex life, ER cr flex ad&d.
    On the other cost center (entered on the timesheet), only ER Dental, ER cr flex life and ER cr flex ad&d are there.
    In addition to the the difference in the posting list, the amounts do not calculate out.
    If I have 70 hours of regular time to one, and 10 hours of regular time to another, that should calculate out, but my amounts are off.
    For example:
    Cost Center#1
    ER Dental 61.92
    Posting prescription 173.62
    PPKP Posting 715.50
    BN Posting Adm Fee 26.32
    ER cr flex life 2.75
    ER cr flex ad&d 1.24
    Cost Center#2
    ER Dental 3.90
    ER cr flex life 0.17
    ER cr flex ad&d 0.08
    If anyone has an idea of where my issue might be I would greatly appreciate any help you can provide. Thank you for taking the time to read my post.

    The only good solution I have found is using the New General Ledger: Distribution of liabilities according to expenses.  I believe this is only available for users of ECC 6.0 and finance has to be using the new GL funtionality.  This will allow you to post the benefits and taxes to the cost centers associated with the earnings.

  • Report to list all POs & value contracts in a cost center

    Hi,
    Our client wants a report to pull all the POs and value contracts that are associated with a cost center. This particular cost center has been closed down. So the client is asking for a report from SAP that lists all the open POs and value contracts associated with the old cost center so that the cost center can be updated to the new one.
    Can anyone please advise on this issue?
    Thanks

    Please make use of ME2K , specify the cost centers , purch org and Scope of lIst :- BEST.
    The problem would be that the system does a calculation in order to find whether the order is still open or not in case of of partial receipts/invoice.

  • Profit Center value for Creation of Cost Center in MDG F

    Hi
    I am using MDG-F 6.1. I want to create cost center using change request type OG_W003 ( Cost Center single processing) without uploading intial data from ECC check table ( CEPC- Procit Center Master Data ).
    Is this possible as there is warning message while creation of CC?
    As there is warning message befor submitting of CR as 
    'Field "Profit Center": Field should be filled because Profit Center Accounting is active'
    If we go ahead for with final processing then again one warning message
    'The status of change request 86 does not allow for object changes'
    After Approval active CC stores in MDG database table and not replicated to ECC even assigned Edition with flag'Immediate replicate' .
    Also one more question How referance data ( Like Controlling Area/Company Codes) are retrived in MDG F in case of add on deployement?
    Does intial upload is requird for this as well?
    In ECC it is possible to create CC without PC.

    Hello Sanjay
    For Interface and for ALE setup Global company code is must. You are dealing with cross-company transfers since you are using MDG and ECC. In the ALE distribution layer, it is required to set up the global company code for the program to understand for which company code the master data is created. This setting will not affect any process. Tcode- ob72 and obb5.
    Kiran

  • BADI for IW31 which has values of Plant,Fundcenter,cost center

    Hi,
    My requirement is that While running IW31,if the first four characters of Settlement Rule(Cost Center) and FundsCenter is not equal to Planning Plant then an error message should be raised . Can you suggest any appropriate BADI or User Exit for this?
    Path for Funds Center-->Go to>Assignment--->Funds Management
    Thanks
    K Srinivas

    Hi Srinivas,
       In order to find Badi or User Exit, you can put a STOP point at class CL_EXITHANDLER and in method GET_INSTANCE, CALL METHOD cl_exithandler=>get_class_name_by_interface and then you can execute the Tcode and then at every click it will stop in debugging & give the name of the Exit or Badi.
    Hope it Helps...
    Regards,
    Shailesh Jadhav

  • URGENT:Making a poplist value freezed based on another poplist value

    Hi,
    I have a requirement to make a poplist value freezed(should get disabled so that no further change can be done) based on another poplist value.
    for ex : poplist 1 : A,B.
    poplist2: yes,no
    if A is selected, yes,no should appear in the poplist2.
    if B is selected, only YEs should appear in the poplist2 and it should get greyed out(disabled for further changing).
    Please help.
    Thanks,
    Veena.
    Edited by: Veena. on Dec 31, 2012 4:00 AM

    Veena,
    there is nothing urgent on this forum!
    You know that you should provide your jdev version so that we can help you solve your problem.
    Next it would help if you provide the code (of the page) so that we see how you setup the 'poplist' (whatever that exactly is).
    If you mean a selectOnceChioce you can implement a valuechangeListener on poplist A and depending on the new value set the value of poplist B to yes and disable it.
    Timo

  • Display only active cost center in match code

    Hello everyone.
    I know this question was already posted but it hasne been answer, any suggestions?
    Thanks!

    By the face of the heading I am unable to understand your requirement.
    However I am answering this with an assumption that while you do an F4 search help for searching the cost centers and at this juncture you don't want all the inactive cost centers to be supprssed.
    If my assumption of your requirement is correct there is no standard functionality available. However you can customize your search help with an ABAPer who can code the display of values as per your requirement.

  • Conditional Display Based on a Field Value

    I'm a newbie ...
    I developed an application that shows payment information.
    Record type one is a cheque
    Record type two is a payment stub
    Rec Type Account Amount PDFFile
    1 888888 1234.00 summary.pdf
    2 888888 10.00
    2 888888 400.00
    2 888888 800.00
    2 888888 24.00
    I have developed a program that assimilates a number of cheque images into a single pdf file. I write the filename and location of that pdf file into a field on 'record type one' (cheque record).
    I want to have a button that only renders on records that that have a value in this field.
    I've looked at conditional display, but can't seem to find the right option.
    Can anyone get me pointed in the right direction?
    Thanks
    Dave

    Dave - Where do you "write" this field? On the same page or from a previous page? What is the display type of this field (which I hope is implemented as an Application Express page item)?
    It's all about having a value in session state for that page item at the time your button is rendered. If you've got that, then the button condition will be trivial.
    Scott

Maybe you are looking for