Report to Report interface - restrict query results

HI Experts,
following issue. i'm using the Report-Report interface to jump from a report to a very detailled report.
my concern is if the user don't filter the first report to a specific Item the receiver report can explode trying to get all items.
is there any technical possibility to restrict this i.e. display message or check the number of items selected?
note: i'm working with BEx analyzer.
thanks to all,
regards,
Younes

HI,
there is a mandatory variables for time restriction.
but not for the material ids so this was the requirement.
are there any other possibilities?
thanks,
regards,
YNS

Similar Messages

Restrict Query Result to last N Documents

Hi,
in a query on an ODS with purchasing documents (headers) I would like to show only the last 5 documents of a supplier.
I can sort on the document date, but how to restrict to the last documents?
Any ideas? Thanks in advance!
Peter

hi Peter,
you may try top/last N, take a look
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/2695d2fd2f0d23e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/66/f0d853a87411d1898a0000e8284689/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/b57138c1afbd20e10000009b38f889/frameset.htm
hope this helps.

Bex report to report interface dynamically based on Value in the query

Hi,
Is it possible to change the destination of the report to report interface dynamically based on the data of the bex query?
For example my query has the below data
Plant | KPI | Quantity
P1 | A | 20.00
P2 | B | 25.00
When the user selects KPI A I want to navigate to Query 1, and when KPI B is selected to Query 2. Query 1 and Query 2 have completely different layouts, Instead of create to two destinations is it possible to pick one based on the KPI selected.
Is this possible in Bex report to report interface or any other way.
Please suggest
Thanks in advance.

Hi
we have RRI in sap bw. ( TCODE RSBBS.)
Below article will enlighten you about this topic .
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?quicklink=index&overridelayout=true
hope this helps

SAP Infoset Query Reporting Set Restriction by Org. Structure

Dear Experts,
I am giving some new users a demo on using Infoset Query on an IDES server.
I am using the user group Personnel Administration (PA) and the HRDATA infoset.
As per my understanding, I should be able to restrict the reporting set according to organizational structure as the infoset is based on logical database PNP. However I am only seeing "No. of hits" in the restrict by drop-down (as can also be seen in the screenshot).
What am I missing to be able to see the restrict by option of "Persons along organizational structure"?
All assistance in this regard is really appreciated.
Regards,
Talha

Dear Azury,
Thankyou for your response.
Your solution is perfectly sound for fulfilling the purpose.
However, because I am conducting a demo, I thought a reporting set restriction on the main screen would be more appealing, than an additional selection screen.
In a demo screenshot I have seen that the restrict by option "Persons along organizational structure", is listed right under "No. of hits" like in my screen shot. Can you shed some light on that. I am attaching the demo screenshot I am talking about for reference as well
Thanks,
Talha

How to add different query results in Report designer

Hi,
I am creating a report based on 3 queries. At the end i need to show total of 3 query results.
How can i add results of queries in report designer??
thanks in advance

Hi Siva,
As u said that u want to show the results of the queries through report designer but i think it is used for formatted reports .
If u want to see tha results of diffrent query then u can use workbook .
In workbook u can also analyse reports easily by applying slice and dice techniques .
from different queries result set will be displayed on workbook with formatting and good look and feel.
regards,
Supriya

Styling report rows using the query result

Hello, is it possible to style a row in a report using the values returned by the underlying sql query?
For example, if my query returns a column called ROW_CLASS I would like to use the placeholder #ROW_CLASS# to style the row, e.g. specifying the row class.
Apparently such row attributes are not available to the apex developer. For each single column value I can set the "Tabular Form Attributes" and "Column Formatting", but I cannot set anything on the whole row.
In other words I can style the TDs but not the TRs.
I think this is clearly a "missing feature" that should be there, single the APEX engine that turns the query result into the HTML that displays the table can already access the column values via their placeholders. It would be sufficient to add some "row attributes" or "row class" field in the report.
It could be used for lots of useful things, in my particular case, highlighting rows that contain errors.
Also there is no way to perform that operation in CSS (e.g. get the TRs which contain at least one TD of class "ROWERROR"). I know it could be done in JS, but that's very messy for such a simple declarative problem.

GChierico wrote:
Hello, is it possible to style a row in a report using the values returned by the underlying sql query? Yes, for standard reports, using custom report templates: +{thread:id=2493917}+
Interactive reports require the use of Dynamic Actions/jQuery.

Desktop apps: Report Builder 3.0 (x86) that does not let me allow query result which I created Customers Report. Here is the error message returns.:

Desktop apps: Report Builder 3.0 (x86) that does not let me allow query result which I created Customers Report. Here is the error message returns as following.
Database query from: AdventureWorks2014
System.Web.Services.Protocols.SoapException: The permissions granted to user 'SQLServer2014\Mubs' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to
user 'mujb-HP\mujb' are insufficient for performing this operation.
at Microsoft.ReportingServices.Library.ReportingService2010Impl.CreateReportEditSession(String Report, String Parent, Byte[] Definition, String& EditSessionID, Warning[]& Warnings)
at Microsoft.ReportingServices.WebServer.ReportingService2010.CreateReportEditSession(String Report, String Parent, Byte[] Definition, String& EditSessionID, Warning[]& Warnings)
The permissions granted to user 'mujb-HP\mujb' are insufficient for performing this operation.
Is there anybody help me out, pl
My MSSQL Server express 2014 edition x64 and My desktop "Report Builder (RB) 3.0' is 32bit (x86).
Does Report Builder x64 exist? I didn't see anywhere so I downloaded x86 RB

Hi mujb,
Per my understanding you are using the report builder 3.0 to design the report and when you click the query designer button to execute the query you got the error message above, right?
I have tested on my local envornment and your issue can be caused by the user "SQLServer2014\Mubs" and "mujb-HP\mujb" haven't grant permission to the report server or the shared dataeource/dataset if you have used this.
I would like to confirm if you have assigned both the Item-Level and System-Level role of the user above to sucessfully access the report server, If you haven't grant any access to the above user and when you connect to the report server in the report builder,
you may got the error message:
More details information below for your reference:
Please execute the query in the microsoft SQL Server Management Studio to see if you have permission to execute the query.
If the query works fine in step1, please run the report builder as Administrator and if you are using the shared datasource/dataset the issue can be cause by the you haven't grant access the share datasource, Double click to open the Datasource
and click the "Test Connection" as below to test if it can connect successfully:
If the "Test Connection" failed, please click the shared datasource/dataset on Report Server to check if you have grant correct permission.
Related information about the grant permission to report server for your reference:
https://msdn.microsoft.com/en-us/library/ms156034.aspx
http://www.allenkinsel.com/archive/2013/01/adventures-in-ssrs/
If your issue still exists, please try to provide more details information.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Two query result rows in single report according to condition

Is it possible to have a report where the first rwo of the report will display the result of query1 and second row will display the result of query2.
The query1 and Query2 are as follows:
SELECT BNO, DATA1 FROM TABLE1 ;
SELECT RNO, DATA2 FROM TABLE2
The matching condition is BNO = RNO(+)
Kindly suggest ?
Sanjay
CREATE TABLE TABLE1
BNO          NUMBER,
DATA1        VARCHAR2(20)
CREATE TABLE TABLE2
RPNO           NUMBER,
RNO         NUMBER,
DATA2       VARCHAR2(20)
INSERT INTO TABLE1(BNO, DATA1) VALUES(111,'200');
INSERT INTO TABLE1(BNO, DATA1) VALUES(112,'400');
INSERT INTO TABLE1(BNO, DATA1) VALUES(113,'500');
INSERT INTO TABLE2(RPNO,RNO,DATA2) VALUES(10,111,'100');
INSERT INTO TABLE2(RPNO,RNO,DATA2) VALUES(11,111,'100');
INSERT INTO TABLE2(RPNO,RNO,DATA2) VALUES(12,111,'100');
INSERT INTO TABLE2(RPNO,RNO,DATA2) VALUES(13,112,'400');
INSERT INTO TABLE2(RPNO,RNO,DATA2) VALUES(14,113,'500');

One option can be UNION ALL
SELECT
     BNO,
     DATA1
FROM
          SELECT
               BNO, DATA1,rownum as rn
          FROM
               TABLE1
          UNION ALL
          SELECT
               t2.RNO as BNO, t2.DATA2 as DATA1, rownum as rn
          FROM
               TABLE2 t2
          WHERE
               EXISTS
                    SELECT
                         1
                    FROM
                         table1 t1
                    WHERE
                         t1.bno = t2.RNO
          ORDER BY
               1,3
BNO                    DATA1
111                    200
111                    100
111                    100
111                    100
112                    400
112                    400
113                    500
113                    500
8 rows selected

Apex 4.2 Report region sql query with "apex_item.text" renders wrongly

In APEX 4.2 page i have created region "Report data".
Type="SQl Query".
"User Interface"-->"Template"="Reports Region".
"Region Source"="select apex_item.text(1, '111') as c1 from dual".
Actually the select query is little bit more complex, but generally simplified it is such, that it uses function "select apex_item.text" to construct HTML textfield.
If i run in Sql Developer query
select apex_item.text(1, '111') as c1 from dual;Then result is:
<input type="text" name="f01" size="20" maxlength="2000" value="111" />But in APEX 4.2 the report is rendered so:
<td headers="c1">&lt ;input type=&quot ;text&quot ; name="f01" size="20" maxlength="2000" value="111" /&gt ;</td>(for this forum to display correctly i had to put extra spaces between" &gt" and ";" and so on)
And APEX 4.2 shows ugly html inside report cell/slot for me, displaying characters/symbols ">". The reason is that APEX HTML page source does not have symbol ">" but has " &gt ;" .
In APEX 3 i have similar query working well, without such anomaly.
What attribute should i change in APEX 4.2 region to display my query result as needed?
I need that function "apex_item.text", i cannot remove it.
Edited by: CharlesRoos on 13.02.2013 15:28
Edited by: CharlesRoos on 13.02.2013 15:29
Edited by: CharlesRoos on 13.02.2013 15:29

CharlesRoos wrote:
In APEX 4.2 page i have created region "Report data".
Type="SQl Query".
"User Interface"-->"Template"="Reports Region".
"Region Source"="select apex_item.text(1, '111') as c1 from dual".
Actually the select query is little bit more complex, but generally simplified it is such, that it uses function "select apex_item.text" to construct HTML textfield.
If i run in Sql Developer query
select apex_item.text(1, '111') as c1 from dual;Then result is:
<input type="text" name="f01" size="20" maxlength="2000" value="111" />But in APEX 4.2 the report is rendered so:
<td headers="c1">&lt ;input type=&quot ;text&quot ; name="f01" size="20" maxlength="2000" value="111" /&gt ;</td>(for this forum to display correctly i had to put extra spaces between" &gt" and ";" and so on)
And APEX 4.2 shows ugly html inside report cell/slot for me, displaying characters/symbols ">". The reason is that APEX HTML page source does not have symbol ">" but has " &gt ;" .
In APEX 3 i have similar query working well, without such anomaly.
What attribute should i change in APEX 4.2 region to display my query result as needed?Ensure that the Display As Column Attribute for the C1 column is Standard Report Column.

CO 1SRJ-001: Too many line items selected via report interface

Report group/report 1SRJ/1SRJ-001 (CCentres: Rolling Year): provides an overview for the last 12 periods of actual and plan data.
When you access line item report RKAEP000 (KSB1 or KSBP) from report Cost Centres Rolling Year (1SRJ-001) using the report/report interface, too much data is selected.
For example, you enter fiscal year 2009 and month 8 in selection parameters, the report generates results for the last 12 periods: 2008/9 to 2009/8. But the line item report accessed via report interface selected ALL data for the fiscal years 2008 and 2009.
I searched and found Note 127643 that described a similar but not exactly the same situation. Have anyone have any problems with this report? Any suggestion is appreicated.
Regards,

Issue with report 1SRJ-001 (S_ALR_87013631) has been resolved. The interfaced line item report selects all data records for fiscal years 2008 and 2009, instead of just for the selected last 12 months. The problem is due to missing restrictions for a characteristic, in this case, the from-period and to-period fields.
SAP has corrected the problem by issuing an updated version (1999) and the one we were using was the 1995 version. I imported the updated version of report from client 000 and now it works fine.

Scheduling a webi report and export the result in PDF on local disk

I'm working with the new SDK to schedule a report and export its result on my local c:\ hard disk drive. My code give no errors at run but I do not find the file on my root.
The Instance counter of the report increase each time, so there is a refresh.
Is something wrong in the following lines? I just follow the examples give in the documentation for scheduling.
Thanks in advance !
Here is my code :
               Destinations oDestinations = Destinations.Factory.newInstance();
               Destination[] oDestination = new Destination[1];
               oDestination[0] = Destination.Factory.newInstance();
               oDestination[0].setName("CrystalEnterprise.DiskUnmanaged");
               DiskUnmanagedScheduleOptions diskOptions = DiskUnmanagedScheduleOptions.Factory.newInstance();
               String[] destinationFile = new String[1];
               destinationFile[0] = "c:\\" + report_name + ".pdf";
               DestinationFiles destinationFiles = DestinationFiles.Factory.newInstance();
               destinationFiles.setDestinationFileArray(destinationFile);
               diskOptions.setDestinationFiles(destinationFiles);
               oDestination[0].setDestinationScheduleOptions(diskOptions);
               oDestinations.setDestinationArray(oDestination);
               System.out.println("Getting report...");
               ResponseHolder respons = this.platform.get("path://InfoObjects/<path to report>/" + report_name, null);
               InfoObjects reports = respons.getInfoObjects();
               if (reports == null)
                    return;
               Webi myReport = (Webi)reports.getInfoObjectArray()[0];
               System.out.println("Getting scheduling info...");
               SchedulingInfo schedulingInfo = myReport.getSchedulingInfo();
               boolean newSchedulingInfo = false;
               if (schedulingInfo == null)
                    schedulingInfo = SchedulingInfo.Factory.newInstance();
                    newSchedulingInfo = true;
               System.out.println("Setting scheduling info...");
               schedulingInfo.setRightNow(Boolean.TRUE);
               schedulingInfo.setScheduleType(ScheduleTypeEnum.ONCE);
               schedulingInfo.setDestinations(oDestinations);
               WebiProcessingInfo webiProcessingInfo = myReport.getWebiProcessingInfo();
               if(webiProcessingInfo == null) {
                    webiProcessingInfo = WebiProcessingInfo.Factory.newInstance();
               WebiFormatOptions webiReportFormatOptions = webiProcessingInfo.getWebiFormatOptions();
               if(webiReportFormatOptions == null)
                    webiReportFormatOptions = WebiFormatOptions.Factory.newInstance();
               System.out.println("Setting Format...");
               webiReportFormatOptions.setFormat(WebiFormatEnum.PDF);
               webiProcessingInfo.setWebiFormatOptions(webiReportFormatOptions);
               myReport.setWebiProcessingInfo(webiProcessingInfo);
               if (newSchedulingInfo)
                    myReport.setSchedulingInfo(schedulingInfo);
               System.out.println("Schedule...");
               this.platform.schedule(reports);
               System.out.println("Schedule done...");

Hi Jerome,
I have gon ethrough your code again and there we are missing the destination plugin.
We have to query the info store to get the disk unmanaged plugin.
Below is the code
IDestinationPlugin destPlugin = null; //Destination plugin returned by InfoStore Query
        IDiskUnmanagedOptions diskUnmanagedOptions = null; //Object returned by the getSchedulingOptions() method
        List listDestination = null; //List object to hold destination file location
        IDestination destination = null; //Destination Interface
        //retrieve the Scheduling Options and cast it as IDiskUnmanagedOptions
        //This interface is the one which allows us to add the file location
        //for the scheduling
          for(int i = 0; i< oInfoObjects.getResultSize();i++)
           oInfoObject = (IInfoObject) oInfoObjects.get(i);
           destPlugin = (IDestinationPlugin)iStore.query( "SELECT * from CI_SYSTEMOBJECTS WHERE SI_PARENTID=29 and SI_NAME='CrystalEnterprise.DiskUnmanaged'").get(0);
          diskUnmanagedOptions = (IDiskUnmanagedOptions) destPlugin.getScheduleOptions();
        listDestination = diskUnmanagedOptions.getDestinationFiles();
          String dest = "c:\\";
        listDestination.add (dest + oInfoObject.getTitle()+".pdf");
          schedInfo = oInfoObject.getSchedulingInfo();
        schedInfo.setRightNow(true);
        schedInfo.setType(CeScheduleType.ONCE);
        //retrieve the IDestination interface from the SchedulingInfo object
        //use the setFromPlugin() to apply the changes we made to the
        //IDestinationPlugin object returned from the IStore
        destination = schedInfo.getDestination();
        destination.setFromPlugin(destPlugin);
          iStore.schedule(oInfoObjects);
Regards,
Prithvi

On starting BI Server Report is showing 0 Result

I have facing a strange problem.One report is showing 0 Result on starting server,checked back end query,it shows it is hitting some other fact,tht'why measure is not found and cast Null as 0 is happening.
Strange thing is when I pull some other column from the same fact (But different Presentation table,same Logical table and Same LTS) along with my required measure it is showing data,hitting correct fact.But If I restart the server,again 0 result is coming.
I disabled cache and restarted,still the issue is coming.
I thought from BMM Layer the measure is not getting correct joins.
So I check all logical and physical join with conformed dimensions with Logical Fact.All are ok.
Measure has 2 definition at two LTS.
1.CASE "Oracle Data Warehouse"."Catalog"."dbo"."Fact_W_ORDERITEM_F"."TOP_LVL_LN_FLG" WHEN 'Y' THEN "Oracle Data Warehouse"."Catalog"."dbo"."Fact_W_ORDERITEM_F"."ROW_WID" END
2."Oracle Data Warehouse"."Catalog"."dbo"."Fact_W_ORDER_F"."NUM_ORDER_ITMS"
Please suggest possible reason.
Edited by: 980674 on Jan 8, 2013 9:04 PM
Edited by: 980674 on Jan 9, 2013 7:12 AM

Say the data is like this.
Material Sold to Party Act Bud
M1          S1               100   0
M1          #                    0    50
M1          S2               200   0
And you want to see like below.
Material Sold to Party Act Bud
M1          S1               100   50
M1          S2               200   50
If this is your requirement, let the sold to party be in Rows.
In columns, for budget, create a local selection, drag budget kf, sold to party (restrict this by # and right click and choose constant selection). This makes the budget kf independent of what is coming in the rows and always shows data corresponding to sold to party #. Hope this is clear.

How to copy existing query report into new query report in SQ00

Hi Experts,
Hi Experts,
I want to add fields "company code" "'region" to existing query report AQZZ/SAPQUERY/FKF1============
(list of vendor address) for this i done as following:
1.In SQ01 go to "EDIT->other user group" and i selected user group as /SAPQUERY/FK
2.I typed F1 in query field and click change button
3.I clicked next screen button and entered into "change query f1: select fields screen".here i clicked "basic list" button and searched company code checkbox and saved it as result company code is appearing in the standard report"AQZZ/SAPQUERY/FKF1============"
but unfortunately there is no region field(LFA1-REGIO) for this i think i should copy the existing query report into new query report(Ex:Z_LIST_OF_VEND) which should be 14 characters.please tell me briefly how to do this because this is first time i am using SQ00.
one more issue is when i selected "edit-otheruser group" and choosing /SAPQUERY/FK i am getting only infoset "/SAPQUERY/FIKD" but i should need Info set: "/SAPQUERY/FIDD" please tell me how to add the previous one into user group.i think if i got /SAPQUERY/FIDD into usergroup /SAPQUERY/FK i can add region also into Query report as i mentioned above by going SQ01 ...............................
please help regarding this which should be very beneficiary to my carrier.
Regards,
naresh

Hi Experts ,
I solved issue by changing infoset in SQ02 by means of assigning field to field group and changed the query in SQ00.
Regards,
naresh.

Report to Report Interface Error

Hello,
I have a summary query which needs to go to detail query. I used the RSBBS transaction to designate the sender and receiver query. I can see the "go to" option in the context box when I try to link from my summary to detail and see the detail query as available. However, when it tries to transfer, I get the following error. I know these queries are saved and active. I can run them each independently but cannot get the Report-to-Report Interface to work. Any help would be greatly appreciated.
Thanks,
Lynda
error:
query &v2 on infoprovider &v3 can't be assigned to the dataprovider &v1,
because it does not exist on the BW Server.

Hi Chandran,
Thank you for your reply and the two links. I am reviewing the assignment details and have a few questions. I currently only have 2 fields assigned - as variables - material and plant.
Everything else is set to generic.
My first query is driven by one date variable which I created which takes a default of January 2008 and pulls Feb - Dec (used offset +1, +2, etc).
The summary report comes up with correct data.
Material Plant UOM Yearly Budgeted Amt Jan/Yr Feb/Yr March/Yr etc
The user then wants to drilldown to detail behind a month. i.e. Jan/Yr
I created the detail query to ask for material and plant which then provides
Material Plant Purchase Order Main Vendor Freight Vendor UOM Qty Recvd Price and Freight Amoutn
There will be multiple Purchase Orders.
One thing I am not sure about transferring fields. Do I need to designate the month/year as a variable in my detail query along with material and plant? I am a bit fuzzy as to the whole process.
Someone I worked with before mentioned that the sending query will pass the fields on the line where you click "go to"????
Thanks for your patience and help...
Lynda

IR Dashboard report from new query not getting all Quick Filter selections

I inherited an IR Dashboard .bqy and my user recently added a new Query, Result, Table, and Report section to it. I cannot get the report to dynamically filter based on the date chosen in the existing Quick Filters section. It seems to be filtering the Location properly (drop down in Quick Filters section), but not the date. Her result section refuses to show anything less than ALL dates from the query.
The other reports/pivots already on the dashboard work fine with all QuickFilters.
In my attempt to integrate her new report in to the dashboard I add a new hidden "dummy" pivot (based on the existing query btw, not the new query-could that be the issue? it's dummy though so i figured it was ok), reference this pivot in the Embedded Targets object I found by adding "Object~Pivot4|Type~9|Target~Casket Margin Summary" line,
went to Dashboard Studio and was able to Associate this report in to the right frame, etc.
In the script behind the QIQ date "Set Filters" button I saw this code for the existing "Result_Detail" section so I added a line for my new "Results_Merch Detail" section.
var objServDate = ActiveDocument.Sections["Casket Margin"].Shapes["Service_Date^qiqlbx^showname^a"];
if (objServDate.SelectedList.Count > 2){
Alert("Please select only two dates");
return;
ActiveDocument.Sections.Item(txlMe.Text).Qiq_onControlClick(this.Parent,this)
ActiveDocument.Sections["Results_Merch Detail"].Limits["Service Date"].Operator = 11
ActiveDocument.Sections["Results_Detail"].Limits["Service Date"].Operator = 11;
I tried it with and without an extra semi-colon at the end of my line. Is that the right way to tell it to apply it to more than 1 Result??
Worked with this for hours now and can't find whatever else is hidden which tells the QIQfIlter Date to refresh this NEW query/result when chosen.
I tried to make sure all Filter items exist in the new query's Request line, one was missing. i haven't gone back to Dash Studio since then and re-saved, does THAT matter? I saved the .BQY and re-processed, still no luck.
can anyone help? I'm desperate for suggestions.
Thank you!
Karen

This has been resolved. The main thing that kept it from working was I kept launching the Dashboard Studio after I was in Design mode so any time I got to the QIQ Filters setup screen it looked like cryptic code and there was nothing to alter or play with to try and force the filters to take effect, so I never changed anything.
This time I launched the Dashboard Studio while accidentally in regular mode, blessing in disguise. on Step 1 of the wizard I chose QIQ Filter Properties from the configuration drop down list which pops up the Local Filters setup window, now in place of code syntax there was english-like words & action items for me to play around with so I chose my new result set from the drop down list and highlighted all the limits and clicked "Set Filters". Presto, that did it.
Also I had to make sure all the columns referenced in the QIQ drop down lists and pick list was in my request line in the Query & Result section, repeat the above, and it's all working great now.
Thanks,
Karen

Report to Report interface - restrict query results

Similar Messages

Maybe you are looking for