Report v3 or V6 and Page Ordering

I need to have Reports print two copies of a report UNCOLLATED. I can set the COPIES parameter to 2 with no problem, BUT I cannot get the pages to print page 1, page 1, page 2, page 2, page 3, page 3, etc. The whole report will print, then the copy will print. Is there any way to turn off report collation?
Also, I am launching the report from Forms with a parameter list. I don't want the parameter screen to display (PARAMFORM=NO) but I do want the Windows Print Dialog to appear (PRINTJOB=YES). The paremeter screen suppression works, but the print dialog does not. Why is this?
Any help on these topics GREATLY appreciated. Email me direct at [email protected]
Thank you

Hello RideTheStorm,
This sounds like an odd requirement and I would say you don't need to "change" the value of the item, just write your SQL in the Classic Report to use what you need.
But to your question...
You can change the value with a Process or Computation that happens "Before Regions". Then the report will use this value (as it's part of the Regions).
Then a Process or Computation that has it's firing point anywhere after "After Regions" will be able to change the values. Now because rendering already happen, if you inspect your page you'll see the "old/original" value, but session state will have the newly calculated value. (However, a post will probably override it again as whatever is in the HTML is what will be posted back to APEX effectively using that value. Hope this makes sense).
The problem with this approach is that I wonder if it will affect pagination and sorting of the report as those actions will use the last value set.
So, I would personally use a different item for the report that I don't need to change back and forth.
Perhaps it would be helpful if you explain the business requirement you're trying to accomplish.
As for the get and post. The http get only renders (but it does execute all the steps in the rendering section). When looking at a page go to "Utilities -> Page Events" to see a representation of the exact order in which things will be processed.
For the POST, it will post/send data back to the server and process. It will NOT render. However... immediately after the post processing is complete something needs to render. So a render will happen immediately following the Page Processing. With a branch you can control which page will render next, but if nothing is specified usually the same page will render again.
Hope this helps.
Thanks
-Jorge

Similar Messages

Report with purchase requisitions and purchase orders: how?

Hi,
I need to get a list of items bought with their purchase requisitions and purchase orders (when they exist). This can be done looking at each purchase order (ME23N), ou purchase requisition (ME53N), and writing it down. But in some cases, I have to do it on about 450 operations. I'd like to get this list without having to search for each requisition ou order. I can get a complete list of orders and requisitions, but without any relationship between them (they are mixed as if they were the same thing, but there´s a field telling it that row is an order or a requisition). Using some macros in excel, I can find this relationship in 40% of the cases (for example, if item 421351 was purchased only once, an order for item 421351 is related to a requisition for item 421351). Is there any way to get this list automatically? Or is there any field that tell me this relationship?
Thanks,
Francisco Morbiolo
Votorantim Cimentos
Votorantim, SP - Brazil

Sorry, I forgot to tell this: I don´t have access to SQ01/SQ02/SQ03.
I get the orders and requisition reports using ZGLPS020.
Thanks,
Francisco Morbiolo
Votorantim Cimentos
Votorantim, SP - Brazil

Photo books and page order

Ok i have a question about the page order on the photo books you make with iPhoto. Cover is.. a cover, then is Page 1 the page right behind the cover or the following one? On the book I've made page 2 and 3 look like as they are on the same side but if page 1 is the one behind the cover then the order should be like that : Page 1 & 2 go together, then Page 3 & 4 etc. I don't know if I made myself clear. I just want to make sure I've organized my book the way I want it to be.
Thanks in advance.

It is a book - when you open it odd numbered pages on on the right and even numbered pages on the left - same as every professional book made
Page 2 is the back side of Page 1, etc.
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
The preview will show the exact layout
LN

Multi page report in design view and page breaks

Hey,
I have designed a report that spans more then a single 8X11 page in design view. The report has one parent frame and 2 child frames. The parent data prints first and then there is a page break before each child's data. The trouble I am having is that where the report is designed over 2 pages in design view the first child's data prints on the 3rd page because of the page break, and then if there is another child it will start to print on the 5th page, etc. Another problem is with the actual page numbering and that page 1 according to the print out actually is 2 pages because of the 2 page design view. I am looking for a way to design a report on 2 pages in design view but have it to print on only 1 page per parent and child depending on how much data there is. If I could fit all of the data elements on a single page in design view it would be easy, but using 2 pages is making it difficult.
Does this make sense? Any suggestions?
Thanks

Try doing the page break by setting the Page Protect property to Yes, not by Page Break before/after.

Interactive alv report with migo miro and purchase order

hi all
to make my alv interactive i put the following code....
i dont know whether it is correct or not coz i hav not done alv before
FORM display.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-cprog
 is_layout = wa_layout
 I_CALLBACK_USER_COMMAND = 'HANDLE_USER_COMMAND'
 it_fieldcat = it_fieldcat
 TABLES
 t_outtab = itab.
ENDFORM. "DISPLAY
FORM HANDLE_USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
 RS_SELFIELD TYPE SLIS_SELFIELD.
 CASE R_UCOMM.
 WHEN '&IC1'.
 IF RS_SELFIELD-FIELDNAME = 'EBELN'.
 READ TABLE ITAB INDEX RS_SELFIELD-TABINDEX.
 SET PARAMETER ID 'ITAB-EBELN' FIELD ITAB-EBELN.
 call transaction 'ME23N' AND SKIP FIRST SCREEN.
 CLEAR RS_SELFIELD.
 ENDIF.
ENDCASE.
ENDFORM. "HANDLE_USER_COMMAND
this code is working
but i hav some problems
when ever i double click on PO number
1. it always opne the last PO number of the my alv list
2. I want to open the migo with migo number when i double clik on the migo number
3. and same for the MIRO
plz help its very urgent...
points wil b rewarded.

Hi,
Following report will explains how to do interactive list in alv report regarding purchase order. Kindly go through that one.
REPORT YMS_ALVINTERSAMPLE NO STANDARD PAGE HEADING LINE-SIZE 650
MESSAGE-ID ZZ_9838.
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
 EBELN LIKE EKKO-EBELN,
 AEDAT LIKE EKKO-AEDAT,
 BUKRS LIKE EKKO-BUKRS,
 BSART LIKE EKKO-BSART,
 LIFNR LIKE EKKO-LIFNR,
 END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
 WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
 EBELN LIKE EKPO-EBELN,
 EBELP LIKE EKPO-EBELP,
 MATNR LIKE EKPO-MATNR,
 MENGE LIKE EKPO-MENGE,
 MEINS LIKE EKPO-MEINS,
 NETPR LIKE EKPO-NETPR,
 END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
 WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
 WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
 I_VARIANT1 TYPE DISVARIANT,
 I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
 Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 I_LIST_TYPE = 0
 IMPORTING
 ET_EVENTS = V_EVENTS
EXCEPTIONS
 LIST_TYPE_WRONG = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
 Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
 WA_EVENT-FORM = 'TOP_OF_PAGE'.
 MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
 WA_EVENT-FORM = 'USER_COMMAND'.
 MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
 text
 -->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
 text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
 I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
 IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
 i_default = 'ZLAY1'
 I_SAVE = 'A'
 is_variant = i_variant
 IT_EVENTS = V_EVENTS
 TABLES
 T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
 text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 IT_LIST_COMMENTARY = IT_LISTHEADER
 i_logo =
 I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
 text
 -->R_UCOMM text
 -->, text
 -->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
 WHEN '&IC1'.
 READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
 PERFORM BUILD_FIELDCATLOG_EKPO.
 PERFORM EVENT_CALL_EKPO.
 PERFORM POPULATE_EVENT_EKPO.
 PERFORM DATA_RETRIEVAL_EKPO.
 PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
 PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
 text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 I_LIST_TYPE = 0
 IMPORTING
 ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
 Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT_EKPO.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
 WA_EVENT-FORM = 'TOP_OF_PAGE'.
 MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
 text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 IT_LIST_COMMENTARY = IT_LISTHEADER
 i_logo =
 I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
 text
 -->R_UCOMM text
 -->, text
 -->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM DATA_RETRIEVAL_EKPO.
SELECT EBELN EBELP MATNR MENGE MEINS NETPR FROM EKPO INTO TABLE IT_EKPO.
ENDFORM.
FORM BUILD_LISTHEADER_EKPO USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: HLINE1 TYPE SLIS_LISTHEADER.
HLINE1-TYP = 'H'.
HLINE1-INFO = 'CHECKING PGM'.
ENDFORM.
FORM DISPLAY_ALV_EKPO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
 I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
 I_GRID_TITLE = I_TITLE_EKPO
I_GRID_SETTINGS =
IS_LAYOUT =
 IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT =
 I_SAVE = 'A'
IS_VARIANT =
 IT_EVENTS = V_EVENTS
TABLES
 T_OUTTAB = IT_EKPO
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Thanks,
Sankar M

Report for duplicate PO and Sales Order

Hi All,
I need to find out two reorts for below purpose:
1) Report that will give me list of all PO's which has duplicate sales order against them .
2) Report that will give me list of all sales order which has duplicate PO's .
I know there is a report SDD1, but it is not giving required reports.
Regards
Nidhi

Hi Nidhi,
As you told SDD1 will work. But what fields you are expecting.
Regards,
Madhu.

Images on iPad started to mix album's pages order since last sync,the names order are correct I've tried to erase and put back album's but got worse because it failed to write some. I would like to avoid to ripristinate the iPad.

ciao, I've got some problema with my Image reader app. Since last sync it started to mix pages order, pages that are correctly nominated and were dispalyed in the correct order since the last sync. unfortunatelly I haven't a backup and I would like to avoid to ripristinate it as I would loose my App documents. I have already tried several time to erase all my albums and putting back, but it got worse and it fails to copy some albums. What can i do?

Since your intention was to sell legit software, I'm sorry that you were as much a victim as your buyers were. I don't know what else you could do except report it as others have suggested and pay your customers back. Companies like Adobe don't have the resources to follow up on every individual case of piracy, but they should be interested in tracking down the sources of the big professional counterfeiting rings. Judging from your description of the packages you sold and the cost of producing such packages, I assume they come from such a source.
function(){return A.apply(null,[this].concat($A(arguments)))}
I'm from Seattle, so I didn't really think twice when the seller told me their source was a person who worked at Microsoft and had access to the "Microsoft store" (which is somewhat infamous here because of how cheap you can get software for if you have access).
I don't get the connection - you were selling Adobe software, not Microsoft software.

Open and closed order reports

Hi,
Please anyone tell me how we can find which orders are open order & which are closed orders??
Also the difference in the recognition between WIP Sales order and Closed Sales order??
Regards,
Roma

Hey,
I know about open and sales order. Actually i have to make an open order report, a WIP order report and a closed order report. And i know we can make these reports from the following:-
CHARACTERISTICS: Bill-to-party,Ship to party, sold to party, Company code,Plant,Sales organization ,Sales Office,Material Number,Deliver block
KEY FIGURES:orders,Open Orders,Order items,Subtotal,Net weight, open Quantity,Gross weight
But i dont know which characteristics and key figures we will use for open order report, which one are for WIP order report and also for closed order report.
Please do tell me how can i make these three reports.
Regards,
Roma

Report for Asset number and its Purahcse order number

Hello Friends,
Please give me details of report for Asset number and its Purchase order number .
Regards
Nilesh Vakil

hi,
GO to ME2N...
use SHIFT + F4..
there check for the acc. assign cata. field and input the asset and execute..
Regards
Priyanka.P

Report for Pegging for forecast and sales order consumption(pegging)

Hi ,
Plaese help to create a report for the below
Requirement is there to have a showing Forecast (Number) and Sales order (Number) pegging Report
Means like to which forecast number the sales order number is consumed
Regards
Kiran

I have tested this on ASCP and I am agree with you. I am pasting one para from document...
"Oracle Master Scheduling/MRP and Supply Chain Planning calculates the ATP quantity of an item for each day of planned production by adding planned production during the period (planned orders and scheduled receipts) to the quantity on hand, and then subtracting all committed demand for the period (sales orders, component demand from planned orders, discrete jobs, and repetitive schedules).
Note: Committed demand does not include forecasted demand or manually entered master demand schedule entries. Also, the amount available during each period is not cumulative. Oracle Master Scheduling/MRP and Supply Chain Planning does not consider ATP quantities from prior periods as supply in future periods. "
Thanks and Regards,
Dipak

Control the page height and page width of pdf report using pasta_pdf.cfg

Hi All,
I've followed the note: 338990.1 (how to print publisher PDF reports via the concurrent manager) in metalink to print a PDF REPORT. Everything work fine except the page height and page width is used as default (8X11). Is there anyway that i can custom page height and page width size such as: legal (8.5X14).
current set up in pasta_pdf.cfg
[DEFAULT]
%% ============== Preprocessing Command ==================== %%
% Pasta can use a preprocessing command to invoke any executable
% that supports an input file and an output file (a filter program).
% You can use redirection. Pasta will invoke the filter program
% to preprocess the Pasta output before passing it to the printing
% command. By using the preprocess option, you can generate output
% formats other than the formats Pasta currently supports. For
% example, you can generate PCL output.
% You can use {infile} and {outfile} in this option.
% {infile} is the output file generated by Pasta. You can use
% it as input for the preprocessing command. It is a temporary
% file and will be deleted after being passed to the
% preprocessing command. {outfile} is the output file generated
% by the preprocessing command. Pasta names it temporarily and
% it will be deleted after being passed to the printing command.
% If you want to keep it, you can name it by using the '-o'
% command line option. Pasta will copy {outfile} to the file you
% specify.
% Preprocess for PDF output
% This is an example for PDF output to print.
; Xpdf
preprocess=/usr/local/bin/pdftops {infile} {outfile}
; Ghost Script
; preprocess=pdf2ps {infile} {outfile}
; Acrobat
; preprocess=acroread -toPostScript -pairs {infile} {outfile}
%% ============== Printing Command ========================= %%
% You can specify the printing command and options you want
% to use to print your report. Pasta will pass the final output
% to this command. {printername} will be replaced by the
% actual printer name passed through the command line option
% (-pn), so in most cases you don't have to change these
% options.
% for UNIX platform
printCommand=lp -c -d{printername}
% for Windows platform
ntPrintCommand=print /D:{printername}
%% ============== Error Log File =========================== %%
% This tells Pasta to create a log file. The default error
% output is stderr.
;errorlogfile=pasta.log
NOTE: pasta version 3.0.4
form server 6.0.8.27.0
third party tool is pdftops
Thanks
Kevin

i think that can be down from the printing direver/styles/prt files when you added the printer at your apps system check the follwoign for more info.
( How to Implement Printing for Oracle Applications: Getting Started )
Note:269129.1
(Step By Step Guide to Set Up a Printer in Oracle Applications)
( Note:60936.1)
fadi
http://oracle-magic.blogspot.com

Print, Export and Page Navigation Buttons in the Report

When I view a report through CR4E, the generated report has 3 buttons namely Print, Export and Page Navigation buttons. But when I click on either of the buttons I get a 'null pointer exception'. This is a critical error as I am unable to navigate past the first page. Do I have to add code to these buttons? If not, why am I getting an error? Kindly solve my problem as soon as possible.

Looking at your code it appears that you are storing the ReportSource in session prior to passing in the ResultSet. This will create a problem when a postback is made on the viewer page (which all of the viewer actions do). If you look at the sample code which is generated when you use the JSP Page Wizard you will notice that the ResultSet is passed to the ReportClientDocument object prior to it being stored in session. Then, when the page is called again this object is retrieved and the ReportSource is used by the viewer. You can quickly run the test using one of our sample reports to see what I am talking about. The code below was generated using the Consolidated Balance Sheet.rpt and did not experience any problems doing any of the viewer actions.<%@page import="com.businessobjects.samples.JRCHelperSample, com.crystaldecisions.report.web.viewer.CrystalReportViewer, com.crystaldecisions.reports.sdk.ReportClientDocument, com.crystaldecisions.sdk.occa.report.application.OpenReportOptions, com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase, com.crystaldecisions.sdk.occa.report.reportsource.IReportSource, java.sql.Connection, java.sql.DriverManager, java.sql.ResultSet, java.sql.SQLException, java.sql.Statement"%><% try { String reportName = "Sample Reports/Consolidated Balance Sheet.rpt"; ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName); if (clientDoc == null) { clientDoc = new ReportClientDocument(); // Open report clientDoc.open(reportName, OpenReportOptions._openAsReadOnly); { // **** POPULATE MAIN REPORT **** { // Connection Info for fetching the resultSet String connectStr = "jdbc:derby:classpath:/Xtreme"; String driverName = "org.apache.derby.jdbc.EmbeddedDriver"; String userName = "dbuser"; // TODO: Fill in database user String password = "dbpassword"; // TODO: Fill in valid password String query = "SELECT CUSTOMER_NAME FROM APP.CUSTOMER WHERE COUNTRY = 'Australia'"; String tableAlias = "FINANCIALS"; // TODO: Change to correct table alias JRCHelperSample.passResultSet(clientDoc, fetchResultSet(driverName, connectStr, userName, password, query), tableAlias, ""); } } // Store the report document in session session.setAttribute(reportName, clientDoc); } { // Create the CrystalReportViewer object CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer(); // set the reportsource property of the viewer IReportSource reportSource = clientDoc.getReportSource(); crystalReportPageViewer.setReportSource(reportSource); // set viewer attributes crystalReportPageViewer.setOwnPage(true); crystalReportPageViewer.setOwnForm(true); // Process the report crystalReportPageViewer.processHttpRequest(request, response, application, null); } } catch (ReportSDKExceptionBase e) { out.println(e); } %><%! // Simple utility function for obtaining result sets that will be pushed into the report. // This is just standard querying of a Java result set and does NOT involve any // Crystal JRC SDK functions. private static ResultSet fetchResultSet(String driverName, String connectStr, String userName, String password, String query) throws SQLException, ClassNotFoundException { //Load JDBC driver for the database that will be queried Class.forName(driverName); Connection connection = DriverManager.getConnection(connectStr, userName, password); Statement statement = connection.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_READ_ONLY); //Execute query and return result sets return statement.executeQuery(query); }%>Try using the code generated from the wizard to see if it works for you as well. Regards, Sean Johnson (CR4E Product Manager)

How to put report title and page no to appear in multiple pages,when using cross tab reports

Post Author: shaminranaweera
CA Forum: General
I am using crystal reports 9.0 with odbc foxpro database conectivity
I have designed a cross tab report and it is on the report header part and all the report details are fine,except that the report title and and page no's only show on the first page of my report.Pls tell me how can i put my report title and page no on all the pages in my crosstab.

Post Author: foghat
CA Forum: General
You need to put your title in the page header if you want it to appear on every page. The report header only displays once per report.

Crystal 6.0 : How to hide the Page footer and Page Header of the Main Report on the Sub report.

Post Author: pranay
CA Forum: Crystal Reports
Hi ,
I have a Main report and a Sub report . When a subreport spans across multiple pages , the page header and page footer of the main report gets displayed along with it . I want to hide the Page Footer and Page Header of the main report when a sub report is displayed . Is there any way it could be acheived in Crystal Report 6.0.

I am assuming you are talking about the JSControl dropdown menu navigation. The easiest way to hide Community pages is to disable the Below Banner View for that navigation scheme, although it also disables the Subcommunties, Related Communities and Go up to Parent Community links. If you still want these in below the banner menu you could not display Community Pages in the "In this Community" tab and only leave the "Community Members and Knowledge Directly" link in there.
You would think that it would be better to remove the "In this Community" tab althogether but it is tricky to remove it due to the fact that there needs to be a default horizontal menu displayed all the time. Not all Communities will have a Subcommunities or Related Communities tab so these communities would not display any below banner menus at all if there is no "In this Community" tab, which could be confusing.

Project code based Sales Order and Purchase Order - Item wise Report

Dear all,
Scenario:
We are doing business based on Projects. So, for every Sales , Project code is created and Sales order is booked with Project code and subsequently Purchase Order is booked with Project code. (Note:Some cases, few items might not be purchased since stock is available.)
We want report like
SO Project code
SO Posting date
SO Sales Employee
SO Customer Name
SO Item code
SO Quantity
SO Unit price
SO Row Total
PO Project code
PO Posting date
PO Sales Employee
PO Customer Name
PO Item code
PO Quantity
PO Unit price
PO Row Total
*SO line item and PO line item for same project should be parallel , that is important and challenge (certain cases, item in SO might not be in PO, for such cases Blank field should appear for PO Item code.)
Thanks in advance,
Regards,
Dwarak.

Hi Dwarak.......
Your Report is right but a small change you have to make Left join RDR1 with POR1........
Try this.......
SELECT T0.PrjCode, T1.Project, T0.PrjName, T1.DocNum, T1.DocDate, T1.CardName, T2.ItemCode, T2.Dscription, T2.Quantity, T2.Price, T2.LineTotal, T3.Project, T4.ItemCode, T4.Dscription, T4.Quantity, T4.Price, T4.LineTotal FROM OPRJ T0 INNER JOIN ORDR T1 ON T0.PrjCode = T1.Project INNER JOIN RDR1 T2 ON T1.DocEntry = T2.DocEntry LEFT JOIN OPOR T3 ON T0.PrjCode = T3.Project LEFT OUTER JOIN POR1 T4 ON T3.DocEntry = T4.DocEntry AND T2.ITEMCODE = T4.ITEMCODE INNER JOIN OITM T5 ON T2.ItemCode = T5.ItemCode WHERE T0.PrjCode ='[%0]' AND
T5.ItmsGrpCod in ('108', '110') GROUP BY T0.PrjCode, T1.Project, T0.PrjName, T1.DocNum, T1.DocDate, T1.CardName, T2.ItemCode, T2.Dscription, T2.Quantity, T2.Price, T2.LineTotal, T3.Project, T4.ItemCode, T4.Dscription, T4.Quantity, T4.Price, T4.LineTotal
Regards,
Rahul

Report v3 or V6 and Page Ordering

Similar Messages

Maybe you are looking for