REPORT WITH SALES AND PRODUCTIN INTEGRATION?

HI,
HERE I NEED TO DISPLAY THE SALES AND PRODUCTION INTEGRATED (FOR MAKE TO STOCK) LIST BY DAY WISE ,I AM NOT ABLE TO FIND THE TABLES FOR THAT.
HERE LIST HEADER IS FOLOWING.
MATERIAL CODE, MATERIAL DISCRIPTION, PRODUCTION QTY, PROD. VALUE, SALES(BILLING QTY, SALES(BILLING) VALUE.
AND THAT LIST TOTAL PRODUCTION VALUE SHOULD EQUAL TO THAT PARTICULAR DAY TOTAL PRODUCTION VALUE,
AND THAT LIST TOTAL SALES(BLIING) VALUE SHOULD EQUAL TO THAT PARTICULSR DAY TOTAL SALES(BILLING) VALUE.
PLZ HELP OUT FROM THIS,
REWARDS IN ADVANCE....
REGARDS,
NAVEEN

Have you tried the txn code MC-Q or the report program RMCV0500.

Similar Messages

Connecting Crystal reports with dashboards and passing parameters

Hi ,
Can anyone have any document on Connecting Crystal reports with dashboards and passing parameters.
I would appreciate for this.
Thank You.

Hi Ganesh,
You can refer the following links for connecting Crystal reports with dashboards:
Dashboard integration in Crystal Reports using flash variables | Clariba Blog
https://websmp102.sapag.de/~sapidp/011000358700001426732009E/Xcelsius_EmbeddingInCR2008.pdf
http://events.asug.com/2012BOUC/0315_Integrating_SAP_Dashboards_into_SAP_Crystal_Reports.pdf
Regards,
Renu

To build some Custom reports for Sales and Distribution

I want to build some Custom reports for Sales and Distribution.
I do not know how to do that.
I reviewed lots of threads earlier, but couldnt understand how to do that.
If any one can send me suitable step by step guide, I will really appreciate it.
Or send me some link or some documents with couple of nice exampples of how to do that.
Which setting to make in B ex and everything.
I am new to BI.
Please advise.
Points will be awarded

Hi,
Could you be more specific about your requirement. I could understand that you wanted to know what all are the Customer sales reports could be provided in SD.
Generally irrespective of projects few reports are considered as baseline reports for any SAP implementations.
For example: 1. Order intakes daily
                      2. Order intakes monthly
                      3. Order magin (daily,monthly)
                     4. Order analysis.
Best regards.

Sub:Stock report with sales unit of measurement - reg.,

Hi guru's
we have a requirement to have the stock report with sales unit of measure instead of base unit of measure can anybody guide me how to do this.
thanks in advance
tulja singh.

From std. , I think your requirement can not satisfied.
Make customized report.
Take the help of ABAPER.

Is there any ECC report with PurchOrder and Purchase Requisition Selection

Hi there,
for one of my BI report reconciliation with ECC requirement, I would like to know how many POs are there without Purchase requisitions, same way want to know how many POs are there with Purchase requisition.
I know some tables where we can find this info, unfortunately I cannot ask my user to go and check in Tables for Acceptance testing. So I am looking for any standard ECC report with POs and PRs as Columns
Due to time constraints, I cannot go build any ABAP queries in ECC at the moment,
Any insights are greatly appreciated.
Thanks

Hi Curious ,
Check if the following link is helpful. The link is from the SDN Wiki for creating a Z Report in R/3 for Purchase Requisition.
http://wiki.sdn.sap.com/wiki/display/ABAP/PurchaseRequisitionDetail+Report
Or try the following transactions:
ME5A - Purchase Requisitions: List Display
ME53 - Display Purchase Requisition
ME53N - Display Purchase Requisition
Hope this helps your cause.
Regards,
Kush Kashyap

DB View with Sales and Finance Data

Team,
Is there a DB view with Sales and Finance data?
-Cust No.
-PO#
-Invoice
-Clearing Doc
-Ship From
-Unit Price
Etc.
Thanks
Naved

hi there is a maximum level of view
BKPF_BSID_AEDAT ....
if you want you can create a with view with you own selection in the seSE11 ..
go for the database view ..... because it wil give you the data @ database level
Girish

I need to make a report with graphs, and generate an exit file to word

I have to do the acquisition for a laboratory and to make inmediately a report with graphics and a constant test about the method of the experimentation

Probably your best bet is to use ActiveX and control Word from LabVIEW, this way, you can act as you were using Word directly, automating all the steps to create your report. Look for examples in the developer zone, although there will be more examples relating Excel, that can show you the way to act. If you need to use this intensively, i think NI has created a Word toolokit that you can buy.
For any particular question, just ask.
Good luck

Enhancing Customer Reports with Commands and Parameters

Hi All,
I am implementing the mentioned tutorial. I have succesfully deployed the AccessStatisticApplication PAR on portal. While scheduling the report from Content Management -> Reports -> Running Reports, it is giving error "Can't find bundle for base name com.sap.netweaver.km.stats.reports.DocumentAccessReport, locale en_US". Has anyone faced the problem, can anyone please help to remove this runtime error.
Related Link: <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7d28a67b-0c01-0010-8d9a-d7e6811377c0">Enhancing Customer Reports with Commands and Parameters</a>
Regards
Poonam

True, the application property service is apparently not to be used for a real-life scenario
You can definitely use the application property service in production scenarios - it's used by other components in a standard KM install, i.e. out-of-the-box.
in our case it forced the server down with deadlocks. 
This should definitely not happen! Did you get SAP support to take a look at this? Was it the most popular documents report that caused this, or some other custom code? There should be no such problem with this service, since it's been around for quite some time and in production use.

Even if the code sample is not to be used for real-life scenarios it could at least make use of something else than the application property service which isnt't optimal for this use.

The application property service is good for a lot of scenarios, so it is realistic to use in in real-life scenarios. The only time I have seen this approach (storing the number of hits on documents in the database) fail is in very high-load scenarios.
Could you provide me with a link to the documentation for the logging framework?
<a href="http://http://help.sap.com/saphelp_nw70/helpdata/en/d2/5c830ca67fd842b2e87b0c341c64cd/frameset.htm">Logging and Tracing</a> on help.sap.com and <a href="https://help.sap.com/javadocs/NW04S/current/en/index.html">Logging and Tracing API (J2EE Engine API)</a> for NW 7.0.

Customer Report with Sales Employee and Due date

Hi,
I need to configure a report for Customers with Sales Employee & Due date.is there any standard report for this combination in SAP or Do i need to Configure separate report for this.If i need to configure this -kindly help me with some guide lines to prepare this.It would be a great help if you provide some steps to configure this Report.
Thanks in advance
Suvarna

Have you tried the txn code MC-Q or the report program RMCV0500.

Creating a report with user and lastlogintime

Hello,
I need to create a report to show the users and their lastlogintime.
How can this be accomplished?
We have OIM 10g integrated with OAM and OID.
Thanks
Khanh

Hi,
Yes, It should be possible if your OAM is storing user's session.
http://docs.oracle.com/cd/E21764_01/doc.1111/e15478/session.htm#CHDDAGHI
Try to make some SQL queries using OAM DB and execute those queries using BI publisher to generate the reports.
Just check whether OOTB OAM reports includes any such kind of reports.
http://docs.oracle.com/cd/E21764_01/doc.1111/e15478/audit.htm#BABEJGAA
~J

Sales Report with Sales Group Field

Hi Experts,
Do you know some reports that will display also the sales group value?
Thanks a lot!

Hi
You can create a Z report with the logic of Fetching VBELN form Table VBKD with customer account assignment group KDGRP.
Your selection query "Select VBELN from VBKD where KDGRP = '02' ".
try and revert.

PR or PO report with Sales Order Number

Friends,
Is there any report with PR Number & Sales Order Number or PO Number & Sales Order Number
Regards
Banniar

hi,
VBAK SAles doc header data
VBAP sales doc item data
VBEP - sales doc schedule line data
VBFA - sales doc flow...in it VBELV gives preceding doc...and VBELN gives subsequent docs....
hope it helps...
Regards
Priyanka.P
Edited by: Priyanka Paltanwale on Sep 23, 2008 6:38 AM

BO report with additive and nonadditive data

Hi.
Sorry if this is duplicated question.
I need to design datamarts, universe and a report.
I have the next figures in the report:
Date (lookup date Year / Month / Week / Day) - Dimention. May be list of date on the same report (2013 Jan, Mar, Nov)
Sale, USD - Measure SUM for each period
Balans, USD - Measure. Have to show figure on the last date of each selected periods.
Example:
Prompt = list (Jan 2013, Mar 2013, Nov 2013)
Date...........Jan'13...........Mar'13...............Nov'13
Sale...........100...............200...................300
Balans.......1000.............2000.................3000
Table Example:
Good..................Date....................Sale..................Balans
Mobile................01/01/2013...........50.....................950
Charger..............01/15/2013...........50.....................1000
iPad...................03/01/2013...........100...................1900
USB Cable..........03/15/2013...........100...................2000
LapTop...............11/01/2013...........150...................1850
Charger...............03/15/2013...........150...................3000
May I use one table only (as I showed above Table Example) with columns: Good, Date, Sale, Balans and to configure Univers to catch SUM(Sale) and Balans on the last date of each selected period?
Could you provide please the best way for this case?
Thank you in advance.

It is doesn't metter how I receive Balance.
I need AGGREGATE SUM of Sales and catch Balance of the last day selected period (bold figures on the tebles below).
Good..................Date....................Sale..................Balans
Mobile................01/01/2013...........50.....................950
Charger..............01/15/2013...........50.....................1000
iPad...................03/01/2013...........100...................1900
USB Cable..........03/15/2013...........100...................2000
LapTop...............11/01/2013...........150...................1850
Charger...............03/15/2013...........150...................3000
Let me know if something is wrong on the question.

Problem with PRI and Nortel Integration

We have a Nortel Option 81C connected to a 3825 MGCP gateway and we had a weird problem with it. The PRI looked fine from CallManager's perspective, but the PBX was showing that the first nine channels were in a Far End Make Busy state (FE MBSY) instead of being in IDLE state like CCM thought.
I did some checking around and found a weird "fix" for the problem that involved enabling and then disabled D-channel service messages on the PBX, but I'd like to find out more about this problem. I got the fix from a guy who has a LOT of experience with Nortel and with Cisco, and he said that 99 times out of 100, an FE MBSY problem like this is going to be because of the Cisco side, not the Nortel side.
I just did a bug search through CCM 4.1(3) and IOS 12.4(8) and I didn't see anything about D-channels being incorrectly reported as unavailable on PRI.
Have any of you ever heard of something like this?
Thanks!
John

John,
Our 81Cs are long gone, but the only ISDN switchtype that worked flawlessly for us was NI. We tried DMS100, and saw your problem. Nortel sees NI as a carrier side protocol and will not allow an inbound NI call to tandem through to another NI PRI. This forced us move all PSTN PRIs to CCM gateways early in out migration, but worked out well. I believe QSIG will also work, but it was a $20k upgrade for our PBXs, so was not an option.
Dave

Report for Sales and purchase tax (selection criteria-Tax code)

Hi
I have one query for sales tax details which gives me detail for all A/R invoices and taxes involved in it. But i want that while executing query system should ask tax code and gives detail of tax amount in front of item and invoice according to tax code selected.
The query is:
SELECT M.DocNum AS 'Inv.No ', M.DocDate as 'Date', M.CardName as 'Customer Name',L.Dscription,L.Quantity,L.Price, (Select Sum(LineTotal) FROM INV1 L Where L.DocEntry=M.DocEntry) as 'Base Amt.(Rs.)', (SELECT Avg(TaxRate) FROM INV4 where statype=1 and DocEntry=M.DocEntry) as ' VAT % ', (SELECT Sum(TaxSum) FROM INV4 where statype=1 and DocEntry=M.DocEntry) as ' VAT (Rs.) ', (SELECT Avg(TaxRate) FROM INV4 where statype=4 and DocEntry=M.DocEntry) as ' CST % ', (SELECT Sum(TaxSum) FROM INV4 where statype=4 and DocEntry=M.DocEntry) as ' CST (Rs.) ', (SELECT Avg(TaxRate) FROM INV4 where statype=7 and DocEntry=M.DocEntry) as ' TAXEXEMPT % ', (SELECT Sum(TaxSum) FROM INV4 where statype=7 and DocEntry=M.DocEntry) as ' TAXEXEMPT ', (SELECT Avg(TaxRate) FROM INV4 where statype=8 and DocEntry=M.DocEntry) as ' VAT% ', (SELECT Sum(TaxSum) FROM INV4 where statype=8 and DocEntry=M.DocEntry) as 'VAT12.5 ', (SELECT Avg(TaxRate) FROM INV4 where statype=9 and DocEntry=M.DocEntry) as ' CST 2% ', (SELECT Sum(TaxSum) FROM INV4 where statype=9 and DocEntry=M.DocEntry) as ' CST @2 ', (SELECT Avg(TaxRate) FROM INV4 where statype=11 and DocEntry=M.DocEntry) as ' CENVCST % ', (SELECT Sum(TaxSum) FROM INV4 where statype=11 and DocEntry=M.DocEntry) as ' CENVCST ', (SELECT Avg(TaxRate) FROM INV4 where statype=-90 and DocEntry=M.DocEntry) as ' BED % ', (SELECT Sum(TaxSum) FROM INV4 where statype=-90 and DocEntry=M.DocEntry) as ' BED ', (SELECT Avg(TaxRate) FROM INV4 where statype=-60 and DocEntry=M.DocEntry) as ' Cess% ', (SELECT Sum(TaxSum) FROM INV4 where statype=-60 and DocEntry=M.DocEntry) as ' Cess ', (SELECT Avg(TaxRate) FROM INV4 where statype=-55 and DocEntry=M.DocEntry) as ' HCess % ', (SELECT Sum(TaxSum) FROM INV4 where statype=-55 and DocEntry=M.DocEntry) as ' Hcess ', L.LineTotal as 'Row Total (Rs.)',M.DocTotal as 'Doc Total' FROM OINV M LEFT OUTER JOIN INV1 L on L.DocEntry=M.DocEntry LEFT OUTER JOIN INV4 T on T.DocEntry=L.DocEntry and L.LineNum=T.LineNum LEFT OUTER JOIN INV5 J ON M.DocEntry = J.AbsEntry LEFT OUTER JOIN INV3 Q ON M.DocEntry = Q.DocEntry WHERE (M.DocDate >= '[%0]' AND M.DocDate <= '[%1]') AND TargetType ! = 14 GROUP BY M.DocNum,M.DocDate,M.CardName,M.NumAtCard,M.DocEntry,M.DiscSum,M.WTSum,L.Dscription,L.Quantity,L.Price,L.LineTotal,M.DocTotal ORDER BY M.DocNum,M.DocDate,M.CardName,M.NumAtCard,M.DocEntry,M.DiscSum,M.WTSum,L.Dscription,L.Quantity,L.Price,L.LineTotal,M.DocTotal
I want 2 queries which asks tax code during selection criteria for both cases sales and purchase.

Hi Malhotra,
Try this,
1st remove the FROM/TO Doc. Date where Condition in your Query report.
AND add the below where condition in your Query report.
WHERE statype = '[%0]'
OR
Try this Query Report.
SELECT
M.DocNum as 'A/R Invoice No.',
M.DocDate as 'Inv. Date',
M.CardCode as 'Customer Code',
M.CardName as 'Customer Name',
M.NumAtCard as 'Bill No. & Date',
ISNULL(L.ItemCode,'Service Item') as 'Item Code',
L.Dscription,
L.Quantity,
L.LineTotal,
L.TaxCode,
L.[VatSum],
M.WTSum AS 'TDS (Rs.)',
M.DocTotal as 'Total (Rs.)'
FROM OINV M
LEFT OUTER JOIN INV1 L on L.DocEntry=M.DocEntry
LEFT OUTER JOIN INV4 T on T.DocEntry=L.DocEntry and L.LineNum=T.LineNum
LEFT OUTER JOIN INV5 J ON M.DocEntry = J.AbsEntry
LEFT OUTER JOIN INV3 Q ON M.DocEntry = Q.DocEntry
WHERE
(M.DocDate >= '[%0]' AND M.DocDate <= '[%1]')
AND
L.TaxCode='[%2]'
GROUP BY
M.DocNum,M.DocDate,M.CardCode,M.CardName,M.NumAtCard,L.ItemCode,L.Dscription,L.Quantity,
L.LineTotal,M.DocEntry,M.[DiscSum],L.TaxCode,L.[VatSum],M.WTSum,M.DocTotal
ORDER BY
M.DocNum,M.DocDate,M.CardCode,M.CardName,M.NumAtCard,L.ItemCode,L.Dscription,L.Quantity,
L.LineTotal,M.DocEntry,M.[DiscSum],L.TaxCode,L.[VatSum],M.WTSum,M.DocTotal
Regards,
Madhan.

REPORT WITH SALES AND PRODUCTIN INTEGRATION?

Similar Messages

Maybe you are looking for