Report writer totals not displayed.

Hi Gurus,
We included a Set in a Report .. Which includes G/L account(RACCT) from GLT1 table. Just by including the "Set" in the Report... The totals row(just formula) is emptied out ...
Will the enhancements or patches help this .. Since this is working fine in Dev system.. but has problem only with PRD system.
Thanks,
YGB

ANSWERED BY ME

Similar Messages

Print Logo in Classic Report (Write Method,Not ALV)

Hi All,
I'm currently doing conversion of the All the Classic Report with addition of Header with 'LOGO'.
I'm willing to find out that Function (CALL FUNCTION 'WWW_GET_MIME_OBJECT') is only able for display but not show out during printing.
Is that any method, I can do it(Print with Logo) without conversion to SAP Script or Smartform that was exhausted.
*Please take note is Classic Report with Write Method (Line by Line), Not ALV.
Thank you all in advance
Regards,
Trevor Wong.

Hi,
It is possible to include logo in classical report but its not possible to print logo in classical report. It can be done in ALV's.
Write the code in Top-of-page event in ALV.
The following is the code for inserting the logo in ALV.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
           I_LOGO             = 'ENJOYSAP_LOGO'
            IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM.
Regards
Purnand

Few values of report column do not display in report while applying filter

Post Author: anuragg11
CA Forum: WebIntelligence Reporting
There are 6 drill filters applied on the report to filter out the report column data. Few values of the report are not displaying in the report when using drill filter. Same issue is with report filter too. If filters are removed then values are appearing in the report. We are using version BO XI R2 & Java runtime JRE 1.4v. It doesn't look issue is with Java version because only few specific data of the report column are not shown in the report when using filter on the data. Example: One of Report data column contains below values: 24.2, 26.9, 120.1, 230, 274.9, 275.8, 333.2 Report is displaying all these values when there is no filter on any data. But report doesn't display data when applying filter on 274.9 or 120.1 howver filter on other values 24.2, 26.9, 230, 275.8, 333.2 are working fine.

Hello,
I think i know what your problem is.
Although in table view your 2 requests combine perfectly and show separate results in pivot view BI unfortunaterly adds them up.
One work around would be to go in your criteria add in each request a dummy column. This can be obtained the following way:
1. click on a column to add it in the criteria (it doesnt matter which one)
2. go into the edit formula of that column
3. delete the formula and in its place write 'Dummy Column 1'
Do the same for the second request by adding a "Dummy Column 2'
Now the Pivot Table should also show up correctly
Let me know if it goes well or if you have any further questions,
Kostis

Problem in report .if i run the report it is not display the quantity,price

This program is an AP Standard Price Variance Report. For each Material it details all invoices created for that material including the quantity invoiced, the actual Unit Cost for invoiced quantity and the actual   amount invoiced. For each material/Vendor combination, it totals and compares the actual quantity, Unit Cost, and the amount with standard quantity, Unit Cost and amount. The amount difference   equals the   total   deviation.
problem in if run the report under material have items but one of the item not displaying quantity and cost but it is calcualting
displaying the total invoice cost ..but under material number it is showing 0...
if it_bkpf-blart eq 'WE' or
       ( it_bkpf-blart eq 'WA' and
     ( it_bseg-werks = '09' or it_bseg-werks = '99' ) and "DV2K927836
         ( it_bseg-hkont = '0001701010' or
         it_bseg-hkont = '0001720010' ) ).
      it_detail-menge      = it_bseg-menge.
    endif.
    it_detail-werks      = it_bseg-werks.
    it_detail-hkont      = it_bseg-hkont.
    it_detail-hkont_desc = ws_hkont_desc.
    it_detail-belnr      = it_bkpf-belnr.
    it_detail-blart      = it_bkpf-blart.
    it_detail-lifnr      = ws_lifnr.
    it_detail-lifnr_desc = ws_lifnr_desc.
    if it_bkpf-blart eq 'RN'
       or it_bkpf-blart eq 'RI'
       or it_bkpf-blart eq 'RF'
       or it_bkpf-blart eq 'RC'
         or it_bkpf-blart eq 'RD'
           or it_bkpf-blart eq 'ER'.
      if it_bseg-menge ne 0.
        it_detail-inv_ucost = it_bseg-wrbtr / it_bseg-menge.
      else.
        it_detail-inv_ucost = it_bseg-wrbtr.
      endif.
      if it_bseg-shkzg = 'H'.          "Credit Indicator
        it_bseg-wrbtr = 0 - it_bseg-wrbtr.
      endif.
      it_detail-inv_cost = it_bseg-wrbtr.
    endif.
    if it_bkpf-blart = 'WE' or it_bkpf-blart = 'WA'.
      if it_bseg-hkont = '0001701010' or
         it_bseg-hkont = '0001720010'.
        if ( it_bkpf-blart eq 'WA' and
        ( it_bseg-werks = '09' or it_bseg-werks = '99' ) ). "DV2K927836
          clear ws_awkey.
          ws_awkey = it_bkpf-awkey.
clear ws_mseg_werks.

This program is an AP Standard Price Variance Report. For each Material it details all invoices created for that material including the quantity invoiced, the actual Unit Cost for invoiced quantity and the actual   amount invoiced. For each material/Vendor combination, it totals and compares the actual quantity, Unit Cost, and the amount with standard quantity, Unit Cost and amount. The amount difference   equals the   total   deviation.
problem in if run the report under material have items but one of the item not displaying quantity and cost but it is calcualting
displaying the total invoice cost ..but under material number it is showing 0...
if it_bkpf-blart eq 'WE' or
       ( it_bkpf-blart eq 'WA' and
     ( it_bseg-werks = '09' or it_bseg-werks = '99' ) and "DV2K927836
         ( it_bseg-hkont = '0001701010' or
         it_bseg-hkont = '0001720010' ) ).
      it_detail-menge      = it_bseg-menge.
    endif.
    it_detail-werks      = it_bseg-werks.
    it_detail-hkont      = it_bseg-hkont.
    it_detail-hkont_desc = ws_hkont_desc.
    it_detail-belnr      = it_bkpf-belnr.
    it_detail-blart      = it_bkpf-blart.
    it_detail-lifnr      = ws_lifnr.
    it_detail-lifnr_desc = ws_lifnr_desc.
    if it_bkpf-blart eq 'RN'
       or it_bkpf-blart eq 'RI'
       or it_bkpf-blart eq 'RF'
       or it_bkpf-blart eq 'RC'
         or it_bkpf-blart eq 'RD'
           or it_bkpf-blart eq 'ER'.
      if it_bseg-menge ne 0.
        it_detail-inv_ucost = it_bseg-wrbtr / it_bseg-menge.
      else.
        it_detail-inv_ucost = it_bseg-wrbtr.
      endif.
      if it_bseg-shkzg = 'H'.          "Credit Indicator
        it_bseg-wrbtr = 0 - it_bseg-wrbtr.
      endif.
      it_detail-inv_cost = it_bseg-wrbtr.
    endif.
    if it_bkpf-blart = 'WE' or it_bkpf-blart = 'WA'.
      if it_bseg-hkont = '0001701010' or
         it_bseg-hkont = '0001720010'.
        if ( it_bkpf-blart eq 'WA' and
        ( it_bseg-werks = '09' or it_bseg-werks = '99' ) ). "DV2K927836
          clear ws_awkey.
          ws_awkey = it_bkpf-awkey.
clear ws_mseg_werks.

Grand Total not displaying correctly on Column level security.

Hi All,
I have implemented the Column level security for three columns. But in dashboard report. The grand total is not displaying correctly. The grand total values are still displayed for the hidden columns.
Is there any work around for this.
The sample how my report looks like after column level security is.
ColumnA Metric1 Metric2 Metrics3(to be hidden)
A 100 200
B 150 100
GrandTotal 250 300 400( this includes the value of A = 300, B = 100).
Regards,
Bhavik

Any pointers please.

Report Painter - Values not displaying

I have a report created in Report Painter using Library 1GK that shows the total units. When I run the report for all cost centers the data does not display. I can explode the row and see the values but not total. I can export the data and the values export. This happens for both units and hours. Any ideas?
Thank you!
Helen

Please check the Section layout for your report and review the Rows tab. The Miscellaneous area has Mark Totals and Suppress duplicated totals. Treatment of zero rows can also be checked, may be the total of debits and credit of individual rows are totalling to zero. Just a guess.

Interactive report: third screen not displaying

Hi Experts,
I am doing a interactive report in ALV grid...and my requirement is
when the user clicks on SPMON which is displayed on the initial screen the first screen
should display and in first screen when the user clicks LIFNR second screen should display..
I am able to display initial and first screen but second screen is not displaying...I am
pasting a pinch of my code please have a look and advice me..
FORM USER_COMM USING P_UCOMM LIKE SY-UCOMM
                           R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
    WHEN '&IC1'.
      IF R_SELFIELD-FIELDNAME = 'SPMON'.
        READ TABLE IT_TAB INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_1[].
        CLEAR IT_TAB_1.
        LOOP AT IT_FIRST WHERE WERK EQ IT_TAB-WERK AND SPMON EQ IT_TAB-SPMON
                           AND ART = IT_TAB-ART.
          MOVE IT_FIRST-WERK       TO IT_TAB_1-WERK.
          MOVE IT_FIRST-LIFNR      TO IT_TAB_1-LIFNR.
          MOVE IT_FIRST-MEANQ      TO IT_TAB_1-MEANQ.
          MOVE IT_FIRST-BASME_QM   TO IT_TAB_1-BASME_QM.
           APPEND IT_TAB_1.
          CLEAR: IT_FIRST, IT_TAB_1.
        ENDLOOP.
        REFRESH IT_FIELDCAT1[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT1
        USING:
          'IT_TAB_1' 'WERK' ' ' 'PLANT' ' ' ' ',
          'IT_TAB_1' 'LIFNR' ' ' 'VENDOR NUMBER' ' ' ' ',
          'IT_TAB_1' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
          'IT_TAB_1' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           I_CALLBACK_USER_COMMAND             = 'USER_COMM_1'
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT1[]
         TABLES
            T_OUTTAB                          = IT_TAB_1[]
      ENDIF.
ENDCASE.
ENDFORM.                    "USER_COMM
For second screen : which is not working
FORM USER_COMM_1 USING P_UCOMM LIKE SY-UCOMM
                           R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
    WHEN '&IC2'.
      IF R_SELFIELD-FIELDNAME = 'LIFNR'.
        READ TABLE IT_TAB_1 INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_2[].
        CLEAR IT_TAB_2.
        LOOP AT IT_SECOND WHERE WERK EQ IT_TAB_1-WERK AND
SPMON EQ IT_TAB_1-SPMON AND ART = IT_TAB_1-ART AND LIFNR = IT_TAB_1-LIFNR.
          MOVE IT_SECOND-ART        TO IT_TAB_2-ART.
          MOVE IT_SECOND-SPMON      TO IT_TAB_2-SPMON.
          MOVE IT_SECOND-MATNR      TO IT_TAB_2-MATNR.
               APPEND IT_TAB_2.
          CLEAR: IT_SECOND, IT_TAB_2.
        ENDLOOP.
        REFRESH IT_FIELDCAT2[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT2
                USING:
                  'IT_TAB_2' 'MATNR' ' ' 'MATERIAL NUMBER' ' ' ' ',
                  'IT_TAB_2' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
                  'IT_TAB_2' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT2[]
          TABLES
            T_OUTTAB                          = IT_TAB_2[]
      ENDIF.
ENDCASE.
ENDFORM.                    "USER_COMM_1
Please advice
Karthik
Edited by: Karthik R on Apr 29, 2009 12:22 PM

Use both conditions in USER_COMM.
FORM USER_COMM USING P_UCOMM LIKE SY-UCOMM
                           R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
    WHEN '&IC1'.
      IF R_SELFIELD-FIELDNAME = 'SPMON'.                      " Field name SPMON
        READ TABLE IT_TAB INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_1[].
        CLEAR IT_TAB_1.
        LOOP AT IT_FIRST WHERE WERK EQ IT_TAB-WERK AND SPMON EQ IT_TAB-SPMON
                           AND ART = IT_TAB-ART.
          MOVE IT_FIRST-WERK       TO IT_TAB_1-WERK.
          MOVE IT_FIRST-LIFNR      TO IT_TAB_1-LIFNR.
          MOVE IT_FIRST-MEANQ      TO IT_TAB_1-MEANQ.
          MOVE IT_FIRST-BASME_QM   TO IT_TAB_1-BASME_QM.
           APPEND IT_TAB_1.
          CLEAR: IT_FIRST, IT_TAB_1.
        ENDLOOP.
        REFRESH IT_FIELDCAT1[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT1
        USING:
          'IT_TAB_1' 'WERK' ' ' 'PLANT' ' ' ' ',
          'IT_TAB_1' 'LIFNR' ' ' 'VENDOR NUMBER' ' ' ' ',
          'IT_TAB_1' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
          'IT_TAB_1' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           I_CALLBACK_USER_COMMAND             = 'USER_COMM_1'
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT1[]
         TABLES
            T_OUTTAB                          = IT_TAB_1[]
      ELSEIF R_SELFIELD-FIELDNAME = 'LIFNR'.              " ELSE FIELDNAME LIFNR
        READ TABLE IT_TAB_1 INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_2[].
        CLEAR IT_TAB_2.
        LOOP AT IT_SECOND WHERE WERK EQ IT_TAB_1-WERK AND
        SPMON EQ IT_TAB_1-SPMON AND ART = IT_TAB_1-ART AND LIFNR = IT_TAB_1-LIFNR.
          MOVE IT_SECOND-ART        TO IT_TAB_2-ART.
          MOVE IT_SECOND-SPMON      TO IT_TAB_2-SPMON.
          MOVE IT_SECOND-MATNR      TO IT_TAB_2-MATNR.
               APPEND IT_TAB_2.
          CLEAR: IT_SECOND, IT_TAB_2.
        ENDLOOP.
        REFRESH IT_FIELDCAT2[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT2
                USING:
                  'IT_TAB_2' 'MATNR' ' ' 'MATERIAL NUMBER' ' ' ' ',
                  'IT_TAB_2' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
                  'IT_TAB_2' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT2[]
          TABLES
            T_OUTTAB                          = IT_TAB_2[]
      ENDIF.
ENDCASE.
ENDFORM.                    "USER_COMM
Regards,
Gurpreet

Crystal Report V9 do not display decimal value HELP!

I have a field in Informix data type is Decimal(6,2)when i used the field in the report, the decimal is not displayedexample: field1 = 305.50, in crystal report it only displayed 305.00, already setup the formatting. any possible solution?, please help!

have check all the options in my pc and crystal report, all seems to be ok, and have tried displaying an informix field decimal(5,2), and it displays ok (154.23) in my crystal report, but when trying to display the field decimal(6,2) crystal report display decimal up to 99.99, but when it reaches 100+, it will not display the decimal, very weird, help.have tried the formula as well but still doesnt work.any other possible solutions, pls help, thanks.

SSRS Report - background image not displaying in MHTML email

We have a report that has a rectangle with an image as a background (doesn't make any difference whether image is external, embedded, etc). The background image displays fine on the screen and when exporting to PDF, but doesn't show when emailing (via subscription)
in MHTML format and opening in MS Outlook, gmail, etc.
It seems to be a legitimate bug with SSRS (have tried in SSRS 2008 R2, 2012, 2014).
Is there a workaround? Service Pack?

Hi Corey Gray,
Per my understanding that the background image in the email subscription not display which format is MHTML, right?
I have tested on my local environment and can reproduce the issue. I deliver this report to three email amounts: Outlook, Hotmail and 163, below I will share the test results with you.
Outlook: the backgroudimage disappear in the email body and there is no one attachment being sent in the email.
Hotmail: the backgroudimage disappear in the email body, however, the backgroundimage being sent as one attachment in the email.
163: the backgroudimage displays in the email body and the backgroundimage being sent as one attachment in the email.
Based on previous test results, we can conclude that: these different scenarios caused by the settings of the email rather than Reporting Services.
If you are using Outlook, I would recommend you submit one thread in this Outlook forum,
http://social.technet.microsoft.com/Forums/en-us/outlook/threads.
In this forum, you can get more professional support about how to set the Outlook.
If you have any other question, please feel free to let me know.
Regards
Vicky Liu

Standard Report's Layout not displaying 'SAVE LAYOUT' Option

Dear All,
Using Tcode VF44, i am getting output list.But in that list when i click on select layout option from toolbar its not displaying 'save layout' Option. can anybody give me soln for the same.How can i get that option?
Regards,
Mayank

HI,
No yaar, This one is standard report and i am getting 'SAVE LAYOUT' option in 300 but not in Production Server.There must be settings for this. If u hv any idea ?
Regards,
Mayank

COOIS- Report Grid Value not displaying

Hi Experts,
In COOIS report Prd Order item details , the grid values and stock category are not displaying values. we created the production order with AFS grid but while seeing report of item details the grid values and stock category are showing null values.
initial screen,
Report
but production order contains grid values.
any one guide me to resolve it.
Regards,
Thangam.P
Message was edited by: Thangam Perumal

Hi ,
my requirement is need to show the grid value and stock category of AFS production order based on item details. i think that alv reports is working based on view. it is possible to add custom view for that report? . if possible mean to any one guide me to fix the problem.
Regards,
Thangam.P

Interactive report's data not displaying on the edit form.

I have an interactive report that contains 3 rows. When I click on the edit button next to one of these rows, the edit form displays the data from that row.
But when I click the edit buttons next to the other 2 report rows, I get an error message that states: "ORA-01403: no data found. Error Unable to fetch row."
I do not see why this is happening. The PK of the table involved is "Request Date", so the report's "Link Column" region sends the value "Request Date" to the item P54_Request_Date in the form page.
Any idea why this would work correctly for one of the report rows but not for the other 2?
Clearly, each of the report rows must have a value for the PK, so why would the form not be able to find the same row that the report displays? Is it a problem with the form's "Fetch Row from" process?
Thanks.

Hello:
Your problems are primarily related to in your choice of a 'Date' type as the PK for your table. The Automated Row Fetch (ARF) process uses a SQL statement similar to the one below to retrieve a record from a table select c1, c2, c3 ... from tab where PK_col = :page_item_containing_PK_value . This would work find if the the 'page_item_containing_PK_value' were of the DATE data type. However, all APEX binds are done using varchar2. This means that the 'page_containging_PK_value' needs to have the char representation of the date that matches the default date setting on your database. So the page-item needs to be something like 'DD-MON-YYYY HH24:MI'. In your case the PK item is probably being set to 'DD-MON-YYYY' and therefore the fetch fails.
Now, for the 'issue with the :' in the character representation of the date.The link on the report page uses the standard APEX URL syntax to construct the link
f?p=App:Page:Session:Request:Debug:ClearCache:itemNames:itemValues:PrinterFriendly
As you can see, the ':' acts as the separator that delineates the components that make up the APEX URL. So, having a ':' in the 'itemValues' component will make the APEX engine treat whatever follows the ':' in the value passed as a delimiter as opposed to being part of the value being passed.
Varad

Crystal Report for Enterprise not displaying Long Text from BEx

Hello,
I am creating a report using SAP Crystal Report for Enterprise 4.0 (Version 14.0.2) and the source of data is BEx query via OLAP connection created using IDT. I am using SAP BusinessObjects BI platform 4.0.
The Characteristic (which is hierarchy) in the Rows section of the BEx Query is set to display long text and as such, it displays long text when the query is executed in the BEx Analyzer. However, when it comes to Crystal Report, the short text is displayed in the report. Can I display long text in the Crystal Report? How?
Thanks,
KP

Venkat,
Thanks for your response. Please note, however, the transaction RAD1 does not exist. Let me provide more details about the current settings of the InfoObject.
The Characteristic is 'Item' (0CS_ITEM) and upon going to RSA1 > Modeling > InfoObjects > Item (0CS_ITEM) > Right Click > Display > Business Explorer (tab) > Text Type is set to 'Long Text' and BEx description is set to 'Long description' already.
When I run/execute the query with this Item characteristic, the results in BEx Analyzer is showing appropriate long text, however, Crystal Report for Enterprise shows short text only
K
Edited by: Kumar Pathak on Feb 3, 2012 6:18 PM

Totals not displaying in excel when download from ALV?

Hi,
I have a program that displays the output in ALV with totals. I am using REUSE_ALV_GRID_DISPLAY. The output in the ALV is correct, totals are also displayed correctly. But when I click on the excel button, data is shown in excel correctly but the TOTALs are not displayed. Please let me know what could be the reason.
I am also trying to put the totals text as
gb_layout-zebra = 'X'.
gb_layout-totals_text = 'Totals'.
but Totals text is not printed in the total of ALV.
Thanks,
Deepthi

Hi Deepti,
Check your field catalog whether you have missed any parameter.
W_FLDCAT-FIELDNAME = 'NETWR'.
W_FLDCAT-SELTEXT_L = 'Net_Value'.
W_FLDCAT-COL_POS = 6.
W_FLDCAT-OUTPUTLEN = 10.
W_FLDCAT-DO_SUM = 'X'.
W_FLDCAT-DATATYPE = 'CURR'.
My guess you might be getting #### symbols if yes the no problem just extend the excel sheet cell(drag the cell are extend ) you can see the values removing #### symbols.
Cheers!!
VEnk@
Edited by: Venkat Reddy on Nov 1, 2008 11:17 AM

Security report SEC_LIST_MBR is not displaying users list

Hi,
When we run security report SEC_LIST_MBR. It is not displaying list of users instead it is just displaying user id who ran the report all other columns Full Name, Teams, Task Profile and Member access are blank.
Please suggest what is causing it not to display list of users.
In database we loaded the following page http://ReportServer/reports and ran report SEC_LIST_MBR. It also gave same result - one row with user id data only.
Regards,
Rajesh

We found the root cause it was because table "task" does not have records in APPSERVER Database.
Once we updated task table. Security report SEC_LIST_MBR is displaying results correctly.
Regards,
Rajesh

Report writer totals not displayed.

Similar Messages

Maybe you are looking for