ReportDocument.Load Exception: Failed to find Report Applicatication Server
I am using ReportDocument.Load(InfoObject infoObject, EnterpriseSession enterpriseSession) to load from an InfoObjects retrieved using InfoStore.Query. Though the query returns a valid report (the InfoObjects object is populated), I continue to get the following exception:
Exception Message = "Load report failed."
InnerException Type = System.Runtime.InteropServices.COMException
InnerException Message = "Failed to find an available Report Application Server."
According to [this thread|Failed to find an available Report Application Server;, I need to check CCM to make sure the Report Application Server is running. It does not show up in my CCM, but in CMC it is running and enabled. I also verified that the Guest account is enabled and has permissions to the reports folder and RAS.
Is there a way to test (with code) that my RAS is running and accessible? The code I am running is located on a different machine than the BOE server.
My purpose in attempting this is to export a report to disk using ReportDocument.ExportToDisk.
Thank you for your help,
-colin-
This was an issue of mixed code. Colin has opened an incident with SAP Support and the issue will be handled there.
Similar Messages
-
Reportdocument load command does not find report
Hi
I have been trying to solve this for almost two weeks now and so I was just wondering if someone could send me to the correct thread or link. I'm trying to deploy a visual studio 2010 asp.net 4.0 website with crystal reports. The report works on my development server. I installed the redistribution msi and I'm not getting messages about not be able to find the assemblies anymore but it won't load the report. I tried placing the report in the following places:
C:\directoryname
inetpub\wwwroot
website virtual directory root
website virtual directory where aspx page is located
website virtual directory reports
inetpub/wwwroot aspnet_client\system_web\4_0_30319\crystalreportviewers13
and it will not load the report. I'm unclear if crystal reports for visual studio 2010 using asp.net is considered a net SDK, a cystal report services or something else entirely so I'm not sure where to look.
Any help in any direction would be appreciated.
JoReiThank you David Hilton for the suggestions. It wasn't finding the file before but now I think it is finding the file but it still doesn't want to work. This is the code I'm using to display the report:
Dim crreport as ReportDocument = New ReportDocument
Try
crreport.load(Server.MapPath("reportname.rpt"))
Catch ex as Exception
console.write("error")
End Try
crreport.SetParameterValue("ReportID", session("daid")
CrystalReportViewer1.ReportSource = crreport
CrystalReportViewer1.visible = true
This works just fine on my test machine which is using Visual Studio's IIS (can't remember the name)
This is the error I'm getting after I publish the site and run it from the server. I'm guessing I haven't loaded the runtime for Crystal report correctly but on Friday I blew away the whole IIS and Crystal and re-installed IIS and then the runtime from the SAP website and it stil isn't working so I'm consistently doing the same mistake and I don't know how to even troubleshoot to figure out what step I'm missing.
Server Error in '/eSubpoena' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
CrystalDecisions.Web.CrystalReportViewer.OnLoad(EventArgs e) +53
System.Web.UI.Control.LoadRecursive() +74
System.Web.UI.Control.LoadRecursive() +146
System.Web.UI.Control.LoadRecursive() +146
System.Web.UI.Control.LoadRecursive() +146
System.Web.UI.Control.LoadRecursive() +146
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2207
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1 -
Load balancing failed to find a valid mailbox database.
While trying to create new mailbox, the following message is displayed:
"Load balancing failed to find a valid mailbox database."
If database is manually selected, there are no problems.
I've checked this:
Get-mailboxdatabase | ft name,isexcludedfromprovisioning
Name
IsExcludedFromProvisioning
MAILBOX01
False
MAILBOX02
False
MAILBOX03
False
MAILBOX04
False
Get-MailboxDatabase –Status | FT Name, Mounted
Name
Mounted
MAILBOX01
True
MAILBOX02
True
MAILBOX03
True
MAILBOX04
TrueWillard Martin:
Get-mailboxdatabase | ft name,issuspendedfromprovisioning
Name
IsSuspendedFromProvisioning
MAILBOX01
False
MAILBOX02
False
MAILBOX03
False
MAILBOX04
False
PK M:
This is Output for: Get-ManagementRoleAssignment -RoleAssignee <UserCreatingMailboxes>
Name Role RoleAssigneeName
RoleAssigneeType AssignmentMethod EffectiveUserNam
e
View-Only Configuration-Org... View-Only Conf... Organization M... RoleGroup RoleGroup All Group Mem...
UnScoped Role Management-Or... UnScoped Role ... Organization M... RoleGroup RoleGroup All Group Mem...
MyDiagnostics-Organization ... MyDiagnostics Organization M... RoleGroup RoleGroup All Group Mem...
Cmdlet Extension Agents-Org... Cmdlet Extensi... Organization M... RoleGroup RoleGroup All Group Mem...
Exchange Server Certificate... Exchange Serve... Organization M... RoleGroup RoleGroup All Group Mem...
Mail Recipients-Organizatio... Mail Recipients Organization M... RoleGroup RoleGroup All Group Mem...
Mail Recipient Creation-Org... Mail Recipient... Organization M... RoleGroup RoleGroup All Group Mem...
MyTextMessaging-Organizatio... MyTextMessaging Organization M... RoleGroup RoleGroup All Group Mem...
Exchange Connectors-Organiz... Exchange Conne... Organization M... RoleGroup RoleGroup All Group Mem...
Organization Client Access-... Organization C... Organization M... RoleGroup RoleGroup All Group Mem...
Mail Recipient Creation-Org... Mail Recipient... Organization M... RoleGroup RoleGroup All Group Mem...
MyProfileInformation-Organi... MyProfileInfor... Organization M... RoleGroup RoleGroup All Group Mem...
Exchange Servers-Organizati... Exchange Servers Organization M... RoleGroup RoleGroup All Group Mem...
Edge Subscriptions-Organiza... Edge Subscript... Organization M... RoleGroup RoleGroup All Group Mem...
User Options-Organization M... User Options Organization M... RoleGroup RoleGroup All Group Mem...
Audit Logs-Organization Man... Audit Logs Organization M... RoleGroup RoleGroup All Group Mem...
Database Copies-Organizatio... Database Copies Organization M... RoleGroup RoleGroup All Group Mem...
View-Only Configuration-Org... View-Only Conf... Organization M... RoleGroup RoleGroup All Group Mem...
Message Tracking-Organizati... Message Tracking Organization M... RoleGroup RoleGroup All Group Mem...
Migration-Organization Mana... Migration Organization M... RoleGroup RoleGroup All Group Mem...
Move Mailboxes-Organization... Move Mailboxes Organization M... RoleGroup RoleGroup All Group Mem...
Move Mailboxes-Organization... Move Mailboxes Organization M... RoleGroup RoleGroup All Group Mem...
Exchange Server Certificate... Exchange Serve... Organization M... RoleGroup RoleGroup All Group Mem...
Migration-Organization Mana... Migration Organization M... RoleGroup RoleGroup All Group Mem...
View-Only Recipients-Organi... View-Only Reci... Organization M... RoleGroup RoleGroup All Group Mem...
Database Availability Group... Database Avail... Organization M... RoleGroup RoleGroup All Group Mem...
Database Copies-Organizatio... Database Copies Organization M... RoleGroup RoleGroup All Group Mem...
Monitoring-Organization Man... Monitoring Organization M... RoleGroup RoleGroup All Group Mem...
View-Only Audit Logs-Organi... View-Only Audi... Organization M... RoleGroup RoleGroup All Group Mem...
Transport Agents-Organizati... Transport Agents Organization M... RoleGroup RoleGroup All Group Mem...
Support Diagnostics-Organiz... Support Diagno... Organization M... RoleGroup RoleGroup All Group Mem...
Transport Hygiene-Organizat... Transport Hygiene Organization M... RoleGroup RoleGroup All Group Mem...
Transport Rules-Organizatio... Transport Rules Organization M... RoleGroup RoleGroup All Group Mem...
Remote and Accepted Domains... Remote and Acc... Organization M... RoleGroup RoleGroup All Group Mem...
Address Lists-Organization ... Address Lists Organization M... RoleGroup RoleGroup All Group Mem...
Message Tracking-Organizati... Message Tracking Organization M... RoleGroup RoleGroup All Group Mem...
Role Management-Organizatio... Role Management Organization M... RoleGroup RoleGroup All Group Mem...
Information Rights Manageme... Information Ri... Organization M... RoleGroup RoleGroup All Group Mem...
Legal Hold-Organization Man... Legal Hold Organization M... RoleGroup RoleGroup All Group Mem...
POP3 And IMAP4 Protocols-Or... POP3 And IMAP4... Organization M... RoleGroup RoleGroup All Group Mem...
Retention Management-Organi... Retention Mana... Organization M... RoleGroup RoleGroup All Group Mem...
Send Connectors-Organizatio... Send Connectors Organization M... RoleGroup RoleGroup All Group Mem...
MyDistributionGroups-Organi... MyDistribution... Organization M... RoleGroup RoleGroup All Group Mem...
Remote and Accepted Domains... Remote and Acc... Organization M... RoleGroup RoleGroup All Group Mem..
Exchange Virtual Directorie... Exchange Virtu... Organization M... RoleGroup RoleGroup All Group Mem..
Database Availability Group... Database Avail... Organization M... RoleGroup RoleGroup All Group Mem..
Mail Tips-Organization Mana... Mail Tips Organization M... RoleGroup RoleGroup All Group Mem..
Security Group Creation and... Security Group... Organization M... RoleGroup RoleGroup All Group Mem..
Mail Enabled Public Folders... Mail Enabled P... Organization M... RoleGroup RoleGroup All Group Mem..
E-Mail Address Policies-Org... E-Mail Address... Organization M... RoleGroup RoleGroup All Group Mem..
Public Folder Replication-O... Public Folder ... Organization M... RoleGroup RoleGroup All Group Mem..
Monitoring-Organization Man... Monitoring Organization M... RoleGroup RoleGroup All Group Mem..
Unified Messaging-Organizat... Unified Messaging Organization M... RoleGroup RoleGroup All Group Mem..
Public Folders-Organization... Public Folders Organization M... RoleGroup RoleGroup All Group Mem..
Recipient Policies-Organiza... Recipient Poli... Organization M... RoleGroup RoleGroup All Group Mem..
Federated Sharing-Organizat... Federated Sharing Organization M... RoleGroup RoleGroup All Group Mem..
User Options-Organization M... User Options Organization M... RoleGroup RoleGroup All Group Mem..
Exchange Connectors-Organiz... Exchange Conne... Organization M... RoleGroup RoleGroup All Group Mem..
Retention Management-Organi... Retention Mana... Organization M... RoleGroup RoleGroup All Group Mem..
Journaling-Organization Man... Journaling Organization M... RoleGroup RoleGroup All Group Mem..
Transport Rules-Organizatio... Transport Rules Organization M... RoleGroup RoleGroup All Group Mem..
Organization Transport Sett... Organization T... Organization M... RoleGroup RoleGroup All Group Mem..
Public Folders-Organization... Public Folders Organization M... RoleGroup RoleGroup All Group Mem..
Unified Messaging-Organizat... Unified Messaging Organization M... RoleGroup RoleGroup All Group Mem..
View-Only Recipients-Organi... View-Only Reci... Organization M... RoleGroup RoleGroup All Group Mem..
Journaling-Organization Man... Journaling Organization M... RoleGroup RoleGroup All Group Mem..
Mail Tips-Organization Mana... Mail Tips Organization M... RoleGroup RoleGroup All Group Mem..
Mail Recipients-Organizatio... Mail Recipients Organization M... RoleGroup RoleGroup All Group Mem..
Audit Logs-Organization Man... Audit Logs Organization M... RoleGroup RoleGroup All Group Mem..
Transport Queues-Organizati... Transport Queues Organization M... RoleGroup RoleGroup All Group Mem..
Recipient Policies-Organiza... Recipient Poli... Organization M... RoleGroup RoleGroup All Group Mem..
Disaster Recovery-Organizat... Disaster Recovery Organization M... RoleGroup RoleGroup All Group Mem..
POP3 And IMAP4 Protocols-Or... POP3 And IMAP4... Organization M... RoleGroup RoleGroup All Group Mem..
Organization Configuration-... Organization C... Organization M... RoleGroup RoleGroup All Group Mem..
MyBaseOptions-Organization ... MyBaseOptions Organization M... RoleGroup RoleGroup All Group Mem..
Transport Agents-Organizati... Transport Agents Organization M... RoleGroup RoleGroup All Group Mem..
View-Only Audit Logs-Organi... View-Only Audi... Organization M... RoleGroup RoleGroup All Group Mem..
Legal Hold-Organization Man... Legal Hold Organization M... RoleGroup RoleGroup All Group Mem..
Send Connectors-Organizatio... Send Connectors Organization M... RoleGroup RoleGroup All Group Mem..
Transport Queues-Organizati... Transport Queues Organization M... RoleGroup RoleGroup All Group Mem..
E-Mail Address Policies-Org... E-Mail Address... Organization M... RoleGroup RoleGroup All Group Mem..
Active Directory Permission... Active Directo... Organization M... RoleGroup RoleGroup All Group Mem..
ApplicationImpersonation-Or... ApplicationImp... Organization M... RoleGroup RoleGroup All Group Mem..
Address Lists-Organization ... Address Lists Organization M... RoleGroup RoleGroup All Group Mem..
Federated Sharing-Organizat... Federated Sharing Organization M... RoleGroup RoleGroup All Group Mem..
Databases-Organization Mana... Databases Organization M... RoleGroup RoleGroup All Group Mem..
Exchange Servers-Organizati... Exchange Servers Organization M... RoleGroup RoleGroup All Group Mem..
UM Mailboxes-Organization M... UM Mailboxes Organization M... RoleGroup RoleGroup All Group Mem..
Active Directory Permission... Active Directo... Organization M... RoleGroup RoleGroup All Group Mem..
UM Mailboxes-Organization M... UM Mailboxes Organization M... RoleGroup RoleGroup All Group Mem..
Distribution Groups-Organiz... Distribution G... Organization M... RoleGroup RoleGroup All Group Mem..
Organization Configuration-... Organization C... Organization M... RoleGroup RoleGroup All Group Mem..
MyContactInformation-Organi... MyContactInfor... Organization M... RoleGroup RoleGroup All Group Mem..
Mailbox Search-Organization... Mailbox Search Organization M... RoleGroup RoleGroup All Group Mem..
Edge Subscriptions-Organiza... Edge Subscript... Organization M... RoleGroup RoleGroup All Group Mem..
MyDistributionGroupMembersh... MyDistribution... Organization M... RoleGroup RoleGroup All Group Mem..
Information Rights Manageme... Information Ri... Organization M... RoleGroup RoleGroup All Group Mem..
Mailbox Import Export-Organ... Mailbox Import... Organization M... RoleGroup RoleGroup All Group Mem..
Security Group Creation and... Security Group... Organization M... RoleGroup RoleGroup All Group Mem..
Mail Enabled Public Folders... Mail Enabled P... Organization M... RoleGroup RoleGroup All Group Mem..
Distribution Groups-Organiz... Distribution G... Organization M... RoleGroup RoleGroup All Group Mem..
Organization Client Access-... Organization C... Organization M... RoleGroup RoleGroup All Group Mem..
Role Management-Organizatio... Role Management Organization M... RoleGroup RoleGroup All Group Mem..
UM Prompts-Organization Man... UM Prompts Organization M... RoleGroup RoleGroup All Group Mem..
Cmdlet Extension Agents-Org... Cmdlet Extensi... Organization M... RoleGroup RoleGroup All Group Mem..
Public Folder Replication-O... Public Folder ... Organization M... RoleGroup RoleGroup All Group Mem..
Receive Connectors-Organiza... Receive Connec... Organization M... RoleGroup RoleGroup All Group Mem..
UM Prompts-Organization Man... UM Prompts Organization M... RoleGroup RoleGroup All Group Mem..
MyRetentionPolicies-Organiz... MyRetentionPol... Organization M... RoleGroup RoleGroup All Group Mem..
Databases-Organization Mana... Databases Organization M... RoleGroup RoleGroup All Group Mem..
Organization Transport Sett... Organization T... Organization M... RoleGroup RoleGroup All Group Mem..
Disaster Recovery-Organizat... Disaster Recovery Organization M... RoleGroup RoleGroup All Group Mem..
Receive Connectors-Organiza... Receive Connec... Organization M... RoleGroup RoleGroup All Group Mem..
MyVoiceMail-Organization Ma... MyVoiceMail Organization M... RoleGroup RoleGroup All Group Mem..
Transport Hygiene-Organizat... Transport Hygiene Organization M... RoleGroup RoleGroup All Group Mem..
Exchange Virtual Directorie... Exchange Virtu... Organization M... RoleGroup RoleGroup All Group Mem..
MyMailboxDelegation-Organiz... MyMailboxDeleg... Organization M... RoleGroup RoleGroup All Group Mem..
Mail Enabled Public Folders... Mail Enabled P... Recipient Mana... RoleGroup RoleGroup All Group Mem..
Recipient Policies-Recipien... Recipient Poli... Recipient Mana... RoleGroup RoleGroup All Group Mem..
Distribution Groups-Recipie... Distribution G... Recipient Mana... RoleGroup RoleGroup All Group Mem..
Message Tracking-Recipient ... Message Tracking Recipient Mana... RoleGroup RoleGroup All Group Mem..
Mail Recipient Creation-Rec... Mail Recipient... Recipient Mana... RoleGroup RoleGroup All Group Mem..
Migration-Recipient Management Migration Recipient Mana... RoleGroup RoleGroup All Group Mem..
Move Mailboxes-Recipient Ma... Move Mailboxes Recipient Mana... RoleGroup RoleGroup All Group Mem..
Mail Recipients-Recipient M... Mail Recipients Recipient Mana... RoleGroup RoleGroup All Group Mem..
Monitoring-View-Only Organi... Monitoring View-Only Orga... RoleGroup RoleGroup All Group Mem..
View-Only Configuration-Vie... View-Only Conf... View-Only Orga... RoleGroup RoleGroup All Group Mem..
View-Only Recipients-View-O... View-Only Reci... View-Only Orga... RoleGroup RoleGroup All Group Mem..
Public Folders-Public Folde... Public Folders Public Folder ... RoleGroup RoleGroup All Group Mem..
Mail Enabled Public Folders... Mail Enabled P... Public Folder ... RoleGroup RoleGroup All Group Mem..
MyDistributionGroupMembersh... MyDistribution... Default Role A... RoleAssignment... RoleAssignment... All Policy As..
MyTextMessaging-Default Rol... MyTextMessaging Default Role A... RoleAssignment... RoleAssignment... All Policy As..
MyContactInformation-Defaul... MyContactInfor... Default Role A... RoleAssignment... RoleAssignment... All Policy As..
MyVoiceMail-Default Role As... MyVoiceMail Default Role A... RoleAssignment... RoleAssignment... All Policy As..
MyBaseOptions-Default Role ... MyBaseOptions Default Role A... RoleAssignment... RoleAssignment... All Policy As..
I've tested functionality with other admin-accounts and they have the same roles and same behavior. There have been no changes in roles or other Exchange settings as far as I know. -
Failed to find WSDL definition and/or locate WSDL file
I am getting this exception
Failed to find WSDL definition and/or locate WSDL file:
- WSDLException: faultCode=OTHER_ERROR: Failed to read WSDL from http://10.126.2.78:6001/HPSDAdapter-HPSDAdapter-webapp/HPSDAdapterService/HPSDAdapterService?wsdl: HTTP connection error code is 407
oracle.j2ee.ws.wsdl.LocalizedWSDLException: WSDLException: faultCode=OTHER_ERROR: Failed to read WSDL from http://10.126.2.78:6001/HPSDAdapter-HPSDAdapter-webapp/HPSDAdapterService/HPSDAdapterService?wsdl: HTTP connection error code is 407
while opening my SOA composite on Jdeveloper 11.1.1.5, this webservice I have added before and it was working fine but now I am getting exception continuously, I am not using proxy in Jdev and can't go for new release as other teams have this version only.
Please suggest what should I do for that.
Thanks.If the server containing the webservices is not running or something in the signature of the webservice has changed, you most likely will get this error. When opening the composite, JDev always validates that all the services that are referenced are alive.
Juan C. -
ReportDocument.Load() taking long time.
Hello,
We are using crystal reports 2010. We are using OLEDB for connecting to reports. When the reports are originally developed, they are saved with a 'Developer Server' set in them. In the production environment, at the time of printing a report, we load the report and change the connection information in it programmatically. We are seeing that the ReportDocument.Load method takes about 20 seconds. I recreated the problem in our Dev environment and am seeing about 50 seconds for ReportDocument.Load to finish when that original development server does not exist on the network. I have turned on CRPE logging and have gotten _bkgrnd, _Diagnostics, _functions trace files generated. I am not sure, which one to look at to relate to the long time being taken by ReportDocument.Load. Any help on that would be appreciated.
Also could you guide us, how to speed up the ReportDocument.Load for us ? I mean, we would be having the developer server set in the reports and we are going to override the connection programmatically. So in that scenario, what is the best way for us to speed up the ReportDocument.Load process so that if the server set on the server is not existing, return back quickly.
Please advise,
Thanks,
AmitHi Amit,
Apply [Service Pack 1|http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_13_0_1.exe] to Crystal Reports for Visual Studio 2010.
There was an issue with CR4VS2010, the report slooks for the database server against which the report was originally developed and this increases the report load time.
This issue is addressed in the above SP1.
Take a look at the Below SAP Notes
14[1439745 - How to improve performance of a Crystal Report in VB. NET application on load of first report.|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433333339333733343335%7D.do]
And the article : [Improving Crystal Reports Performance in Visual Studio .NET Applications|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8029cc96-6ff3-2b10-47a2-b30ea790ea5b]
Hope it helps,
Thanks,
Bhushan. -
Post Author: bhaveshbusa
CA Forum: Crystal Reports
In the ReportDocument.Load method it tries to connect using the using the connection information embedded in the Report File. When the application calls ReportDocument.Load(reportFileName). This
tries to connect to the database using the connection information embedded in
the "reportFileName". This was only realised on checking the ODBC Trace
Log. The connection itself is not a problem. The problem is that the embedded
connection information is related to OLD production system. And failed
connections had raised some concerns.
Note: I am using
SetDataSource to populate the data for the report. So I don't need the
connection.
Is there any way I
can disable this auto-connect?
Thanks and
regards,
Bhavesh960738 wrote:
I need a help in answering one of the issue encountered last week.
I have created a database link and tried to access the information from a table using the program written in another language. The password provided was incorrect for that user while creating database link. So we expected that,while retrieving the data, Database connection has to be errored out as password provided is incorrrect.
But unfortunately, user account was locked out. When i checked with DBAs they mentioned that it tries to connect 16 ports with in a min of time.we were shocked as it STOPS another scheduled jobs with that user. and affects production badly.
As per the program, it has to connect only one time and yesterday we tried to execute the program in DBAs observation and it errored out as expected. Didn't tried for multiple ports.
Now the question is, WHY the database connection established 16 times last week and caused user account locked. DBAs are unable to answer it. Any EXPERTs opinion on this would greatly appreciated.
I have verified managing ports in oracle documentation, it was mentioned that if one port is busy it will try to connect to another port in the range of ports mentioned during the installtion. DBAs verified ports related file and it was blank. and they are not agreeing with this reason. Please HELP me in finding the correct REASON for this.
is it a NETWORK issue or issue with DATABASE SERVER only?
Thanks
SSP
Edited by: 960738 on Sep 22, 2012 9:13 PMDBLINK is 100% oblivious to the fact any port exists.
DBLINK only contains username, password & TNS Alias.
can you post actual SQL & results? -
Load Report Failed - Report Application Server Failed error at runtime
Hello, I'm pretty new to Crystal Reports so please bear with me.
I just installed CR 2008 on my development box, which is running VS2005 .NET 2.0. I changed over all of my assembly references in my web.config to the new version:
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral,
PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportAppServer.Controllers, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Viewing.ReportSource, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
Also the webpage that is displaying the ReportViewer object has this reference as well:
<%@ Register Assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
Now, in my code behind I am simply trying to open a pre-built crystal report that came in the sample pack
When I try and do this in our already built website I get an error:
"Load report failed"
With the inner exception saying:
"The Report Application Server failed"
This same piece of code works perfectly if I build a new website, however when I try and impliment this into our existing code base I get the error shown above. Also the samples I've used all use .NET 3.5 and the website is in 2.0. I'm not sure if that is a factor or not but that is also another piece of information that could be useful.
Any help on this matter would be greatly appreciated. Thank you for you're time.
Chris McMahan
Edited by: Arithal on Aug 4, 2009 8:36 PMAnd finally the stack trace. Sorry for the length of these posts.
[COMException (0x800001f5): The Report Application Server failed]
CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +575
[CrystalReportsException: Load report failed.]
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +646
CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1374
CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +169
Report_Viewer_Crystal_CrystalView.ConfigureCrystalReports() in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:49
Report_Viewer_Crystal_CrystalView.Page_Init(Object sender, EventArgs e) in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:33
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33
System.Web.UI.Control.OnInit(EventArgs e) +99
System.Web.UI.Page.OnInit(EventArgs e) +9
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +834 -
Load Report failed when opening Report under IIS 5.1
I recently upgraded to Crystal Reports 2008 (12) from Crystal Reports Basic 2008 (10.5). I am using Visual Studio 2008 with the CrystalReportViewer. Now when I run my reports from the website under IIS 5.1 (Windows XP SP3), I get a Load Report Failed. The detailed exception follow:
Error loading report (ConfigureCrystalReports)
CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException (0x800001F5): The Report Application Server failed at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() --- End of inner exception stack trace --- at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) at ncspo.ReportViewer.ConfigureCrystalReports() in D:\Websites\NCSPO\FIS\ReportViewer.aspx.vb:line 43
If I run the report using the ASP.Net Development Server, the reports run fine. It only fails under IIS. From other posts, I understand that i need to grant the Network Service and IIS_WPG group read/write permissions to the windows\temp folder. I have done this for the Network Service, but the IIS_WPG group was not introduced until IIS 6.0. Any ideas on how I can get this working under IIS 5.1?
Here is the code behind page:
Private Sub ConfigureCrystalReports()
Try
rpt = New ReportDocument
Dim strReportFilename As String
If Len(Request.QueryString("ReportFilename")) > 0 Then
strReportFilename = Request.QueryString("ReportFilename")
Else
strReportFilename = System.Configuration.ConfigurationManager.AppSettings("cr404Page")
End If
Dim strReportPath As String = System.Configuration.ConfigurationManager.AppSettings("ReportPath")
Dim strReportFilePath As String = strReportPath & strReportFilename
Dim strReportFilePath_Full As String = Server.MapPath(strReportFilePath)
rpt.Load(strReportFilePath_Full) <--- Exception occurs on this line
Catch ex As Exception
lblStatus.Text = "Error loading report (ConfigureCrystalReports)"
lblStatus.Text &= "<BR>" & ex.ToString()
ncspo.clsMisc.LogError(ex, Me)
End Try
End SubAm I correct in reading the following 2 documents that IIS 5.1 is not supported?
If you check this document. It shows IIS6 and 7 no support on 5. See page 6
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f05523e4-35c4-2b10-2c89-9fcf64b0dd22]
This document also on page 5
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a87366-da1d-2b10-e1b4-a37ab37a2dea]
Thanks. -
All DLLS in site fail to load, exception 0x80070057
My C# web application stopped working for no apparent reason, while a similar
application on the same server still works. Looking for ideas what could be
going on and how to fix it.
Yesterday I launched a build of the site with some minor updates. The server
apparently went down during the build, because for a few minutes the TeamCity build manager
displayed a message indicating the connection had been lost. However, it
recovered and resumed the build.
After the build, I was no longer able to load the site. The home page now
seems to be the only page that can load, and it displays incorrectly because the
scripts and stylesheets fail to load. If I check the browser’s error console I
find reports of multiple server error 500’s, where the referenced css and script
files are failing to load.
The server is IIS on Windows Server 2008.
If I go to the server and open the site there, the page gives me error
messages saying, “Could not load file or assembly ‘Antlr3.Runtime.Debug’ or one
of its dependencies. The parameter is incorrect. (Exception from HRESULT:
0x80070057 (E_INVALIDARG)).”
Initially it was reporting the same message for a different file,
AntiXssLibrary. I removed that DLL from the project, and the site switched to
complaining about antlr instead. It looks like the problem isn’t either DLL, but
something else.
On my machine, a nearly identical copy of the same code works without
problem. Another copy of the site on the same server, a slightly earlier version
of our software, works just fine.
I deleted all of the temp files recommended for this error, redid the build,
restarted the machine, and deleted the bin directory and repeated the build. I’m
skeptical that uninstalling or reinstalling any versions of the .net framework
would help, given that the other site works—any problem with the frameowkr ought
to affect both of them.
I turned on assembly logging, which gave me lots of additional information
that didn’t help at all.
Any suggestions what could be going on?Hi Laura Eve,
I have google this error, SomeOne encountered the same problem, I have collected some solutions. Please have a look.
1. empty your %TEMP% folder:
close all programs that you are using (the one in the system tray included)
Click the start button
click Run
type: %TEMP% in the box
click the OK button
2. Now a the directory for temporary files opens:
select all files ( CTRL – A)
press the DELETE key on your keyboard
acknowledge that you want to delete all files
3. The library lib folder
are deleted, then SVN update.
By the way, This forum is to discuss problems of C# development. You'll need to post it in the dedicated ASP.Net Forum
http://forums.asp.net for more efficient responses, where you can contact ASP.NET experts. Thanks for understanding.
Have a nice day!
Kristin -
What causes The Report Application Server failed exception?
My environment:
Windows Server 2008 R2 8 cores 6 gig of ram.
A Windows Service running:
Oracle 11g
Oracle 11.2 64 bit client
C# 4.0 Framwork
Crystal Reports Visual Studio 2010 13.0.2000
This window service needs to create 1100 pdf documents generated by crystal reports per hour for a minimum of 8 hours straight.
These pdf files are written on the local file system.
The Windows Service runs 3 threads per core. Each thread can run up to 5 individual CR .rpt files in a sequential order.
After 4000 pdf documents created, I get the following errors.
1) The Report Application Server failed
2) Server is out of memory.
3) Not enough memory for operation.
4) Invalid report file path.
Using Windows Task Manager Resource Monitor I noticed the following:
After running 3000 pdf report requests, I stopped the processing pdf reports and noticed hundreds of
\BaseNamedObjects\CrystalReportXalanInitizeMutex(Pid of my process)
Why are they there after a close and dispose of the ReportDocument object?
I ran Reggate ANTS Memory Profiler 7.2 to check for memory leaks in my code and my code that I have control over is clean.
Why am I getting the exceptions above?
My code calls ExportReportToSream. After persisting the stream to disk, I call Close and Dispose on the stream.
My Code
========================================================================================== public MemoryStream ExportReportToStream(String reportName, LogOnInfo logOnInfo, string reportParams, CrystalExportFormatType formatType)
ReportDocument reportDoc = new ReportDocument();
if (!System.IO.File.Exists(reportName))
throw new InvalidArgumentException("reportName '" + reportName + "' does not exist", EngineExceptionErrorID.InvalidArgument);
try
lock (lockThis)
reportDoc.Load(reportName, OpenReportMethod.OpenReportByTempCopy);
ApplyLogOnInfo(reportDoc, logOnInfo);
//apply params if any
if (!String.IsNullOrEmpty(reportParams))
ApplyStringParams(reportDoc, reportParams);
return (MemoryStream)reportDoc.ExportToStream((ExportFormatType)formatType);
//we need to use the try catch, finally so the report can be disposed properly
catch (Exception)
throw;
finally
DistroyReportDocument(reportDoc);
reportDoc = null;
private void ApplyStringParams(ReportDocument reportDoc, string reportParams)
if (reportDoc == null)
return;
if (String.IsNullOrEmpty(reportParams))
return;
string[] paramsArray = reportParams.Split('|');
string[] subParamsArray = null;
//apply report params
ParameterValueKind type;
string paramValue = string.Empty;
ParameterField paramField = null;
ParameterDiscreteValue discreteValue;
int x = 0;
int paramCount = 0;
for (x = 0; x < reportDoc.ParameterFields.Count; x++)
// The ParameterFields object contains all parameters including the subreports.
// Subreport params have the name of the subreport.
if (reportDoc.Name.Trim().ToUpper() == reportDoc.ParameterFields[x].ReportName.Trim().ToUpper())
paramCount++;
Edited by: Ludek Uher on Dec 15, 2011 7:57 AM
Edited by: Ludek Uher on Dec 15, 2011 7:58 AMif (paramsArray.Length < paramCount)
throw new InvalidArgumentException("invalid number of arguments passed to report '" + reportDoc.Name + "' expected " + reportDoc.ParameterFields.Count + " received " + paramsArray.Length, EngineExceptionErrorID.InvalidArgument);
for (x = 0; x < reportDoc.ParameterFields.Count; x++)
if (reportDoc.Name.Trim().ToUpper() != reportDoc.ParameterFields[x].ReportName.Trim().ToUpper())
continue;
paramValue = paramsArray[x];
paramField = reportDoc.ParameterFields[x];
type = paramField.ParameterValueType;
if (paramField.EnableAllowMultipleValue && paramValue.IndexOf(',') > -1)
subParamsArray = paramValue.Split(',');
ParameterValues currentParameterValues = new ParameterValues();
foreach (string subParamValue in subParamsArray)
discreteValue = new ParameterDiscreteValue();
discreteValue.Value = subParamValue;
currentParameterValues.Add(discreteValue);
paramField.CurrentValues = currentParameterValues;
else
discreteValue = new ParameterDiscreteValue();
discreteValue.Value = paramValue;
paramField.CurrentValues.Add(discreteValue);
private bool ApplyLogOnInfo(ReportDocument document, LogOnInfo logOnInfo)
TableLogOnInfo info = null;
// Define credentials
info = new TableLogOnInfo();
info.ConnectionInfo.AllowCustomConnection = true;
info.ConnectionInfo.ServerName = logOnInfo.ServerName;
info.ConnectionInfo.DatabaseName = logOnInfo.DatabaseName;
// Set the userid/password for the report if we are not using integrated security
if (logOnInfo.IntegratedSecurity)
info.ConnectionInfo.IntegratedSecurity = true;
else
info.ConnectionInfo.Password = logOnInfo.Password;
info.ConnectionInfo.UserID = logOnInfo.UserID;
// Main connection?
document.SetDatabaseLogon(info.ConnectionInfo.UserID,
info.ConnectionInfo.Password,
info.ConnectionInfo.ServerName,
info.ConnectionInfo.DatabaseName,
true);
// Other connections?
foreach (CrystalDecisions.Shared.IConnectionInfo connection in document.DataSourceConnections)
connection.SetConnection(logOnInfo.ServerName, logOnInfo.DatabaseName, logOnInfo.IntegratedSecurity);
connection.SetLogon(logOnInfo.UserID, logOnInfo.Password);
connection.LogonProperties.Set("Data Source", logOnInfo.ServerName);
connection.LogonProperties.Set("Initial Catalog", logOnInfo.DatabaseName);
// Only do this to the main report (can't do it to sub reports)
if (!document.IsSubreport)
// Apply to subreports
foreach (ReportDocument rd in document.Subreports)
ApplyLogOnInfo(rd, logOnInfo);
// Apply to tables
foreach (CrystalDecisions.CrystalReports.Engine.Table table in document.Database.Tables)
TableLogOnInfo tableLogOnInfo = table.LogOnInfo;
tableLogOnInfo.ConnectionInfo = info.ConnectionInfo;
table.ApplyLogOnInfo(tableLogOnInfo);
if (!table.TestConnectivity())
string strMsg = "ApplyLoginInfo failed to apply log in info for table " + table.Name + ", Crystal Report: " + document.FileName + " DB: " + logOnInfo.DatabaseName + " UserID: " + logOnInfo.UserID;
throw new InvalidOperationException(strMsg);
//verify logon info
document.VerifyDatabase();
return true;
private void DistroyReportDocument(ReportDocument document)
if (document == null)
return;
document.Close();
Edited by: Ludek Uher on Dec 15, 2011 7:59 AM -
Windows 8.1 not booting : "Boot manager failed to find OS loader"
Hello all,
I know this question came up before, but I have being trying to fix this for many days now, without luck and I feel I need some new ideas...
The short story:
My Windows 8.1 is not booting, and gets trapped in cycle of Boot Manager until I tell the UEFI to boot from disk or USB
I can boot up from external CD or USB Windows RE, from which I can get to prompt line
In the log file in C:\Windows\System 32\LogFiles\Srt\SrtTrail.txt I read:
Boot manager failed to find OS loader
Repair Action File Repair à Failed (err code 0x4001)
Repair Action Boot Config Data Store Repair à Failed (err code 0x2)
4. My disk is GPT partitioned, with UEFI Bios
5. I tried the typical Bootrec commands: FixMbr, FixBoot, ScanOs, RebuildBCD but I always get the error:
Identified Windows install:0
6. I tried Bcdedit but I get:
the boot configuration data (BCD) store could not be opened
7. I tried to create a new BCD store in the FAT32 partition (temporarily named "v:\") with
bcdboot c:\Windows /l en-gb /s v: /f ALL
but I get:
Failure when attempted to copy boot files
8. Finally, I noticed that in
C:\Windows\System32\
I DO NOT have the file winload.efi
while in: ESP\EFI\Microsoft\Boot\
I DO have the file Bootmgfw.efi
One question I have is: Is it possible to copy a "healthy" winload.efi from somewhere in my PC into C:\Windows\System32\ ?
Where (which path) could I find it?
Any other ideas? Please help !!!!
Many thanks!! This is literarily driving me crazy because I really don't want to reinstall windows....Hello Kermit_70,
What is your current situation?
Please try the suggestion as aw00t mentioned.
Additionally, please try to use Automatic Repair to fix problems that keep Windows from loading.
For more information, please take a look at the following article.
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-windows-8-a.html
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
PulseAudio error: Failed to find original dlopen loader
Every time I start PulseAudio, it displays this error:
[hb@hb-laptop ~]$ pulseaudio -D
W: ltdl-bind-now.c: Failed to find original dlopen loader.
[hb@hb-laptop ~]$
The daemon starts though, and PulseAudio works, but I'm wondering what is causing this error? I didn't have this error before. Is there some kind of update of a certain package that is causing this?HyperBaton wrote:
Every time I start PulseAudio, it displays this error:
[hb@hb-laptop ~]$ pulseaudio -D
W: ltdl-bind-now.c: Failed to find original dlopen loader.
[hb@hb-laptop ~]$
anybody work on this problem? pulseaudio starts but a warning isn't fine.
rg_rg wrote:
W: ltdl-bind-now.c: Failed to find original dlopen loader.
E: main.c: daemon startup failed.
Daemon does not start
If PulseAudio fails to start as a daemon and the message
E: main.c: daemon startup failed.
appear, you may need to disable the line in /etc/pulse/default.pa that reads
.fail
Simply add a "#" as a comment in front of that line.
Last edited by zyon (2008-11-05 22:52:59) -
Crystal Reports 2013 Failed to find an Available Report Application Server.
Hi Experts,
I am unable to Publish Crystal Reports 2013 to the BI 4.1 SP2 Enterprise.
I have installed SAP CR 2013 on my Laptop and also on our Citrix machine, from both systems I am getting the following error when try to publish:
Failed to find an Available Report Application Server.
All the ports and firewall are open, when doing some trace with Wireshark, its assigning some random ports starting with 64960.
On the same machine, i have installed Crystal Reports 2008, I could publish reports to Enterprise.
Could you please let me know what might be the issue.
Is Crystal Reports 2013 need any specific port to be assigned?
Thanks,
KrisHello Experts,
In addition to assiging the ports for below servers,
Crystal 2013 Report Application Server
Crystal Processing Server
Input File Repository Server
Outout File Repository Server
I have configured the following setting also: Add Service Account that the
CMS runs under to the server's local admin group.
Still I am getitng the following error when trying to save the report to Enterprise:
" Failed to find an Available Report Application Server "
Please advise .
Thanks,
Kris -
Just installed Firefox 4 but when I try to search for add-ons every result fails to find anything or the loading gui just keeps spinning. What should I try to fix this problem?
Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems. -
Failed to find an application descriptor -- loading DefaultApplication
Hi,
I was trying the XmlBean example shown in the thread
Serialization of Owned Collections with XmlBeans
and I am getting the following error message
Failed to find an application descriptor -- loading DefaultApplication
Assertion failed:
Beep!
at com.tangosol.run.xml.CollectionAdapter.<init>(CollectionAdapter.java:70)
at com.tangosol.tests.xml.TestCollectionAdapter.<init>(TestCollectionAdapter.java:17)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at com.tangosol.run.xml.XmlBean$BeanInfo.makeAdapter(XmlBean.java:1141)
at com.tangosol.run.xml.IterableAdapter.findAdapter(IterableAdapter.java:242)
at com.tangosol.run.xml.CollectionAdapter.<init>(CollectionAdapter.java:90)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at com.tangosol.run.xml.XmlBean$BeanInfo.makeAdapter(XmlBean.java:1141)
at com.tangosol.run.xml.XmlBean$BeanInfo.<init>(XmlBean.java:966)
at com.tangosol.run.xml.XmlBean.initBeanInfo(XmlBean.java:874)
at com.tangosol.run.xml.XmlBean.findBeanInfo(XmlBean.java:814)
at com.tangosol.run.xml.XmlBean.getBeanInfo(XmlBean.java:362)
at com.tangosol.tests.xml.TestXmlBean.main(TestXmlBean.java:21)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:90)
What is the missing item to make it run ?
Regards,
Pranab<br><br> <b> Attachment: </b><br>testxmlbean.zip <br> (*To use this attachment you will need to rename 527.bin to testxmlbean.zip after the download is complete.)Found the problem in Contact.xml it should look like this
<?xml version="1.0"?>
<xml-bean>
<name>contact</name>
<property>
<name>Name</name>
<xml-name>name</xml-name>
</property>
<property>
<name>AddressCollection1</name>
<xml-name>address1</xml-name>
<type>java.util.Collection</type>
<class>java.util.ArrayList</class>
<element>
<xml-name>address1</xml-name>
<type>com.tangosol.tests.xml.Address</type>
</element>
</property>
<property>
<name>AddressCollection2</name>
<type>java.util.Collection</type>
<class>java.util.ArrayList</class>
<element>
<xml-name>address2</xml-name>
<type>com.tangosol.tests.xml.Address</type>
</element>
</property>
</xml-bean>
Maybe you are looking for
-
Report on Vendor selection according to material group
Hi gurus, I have a requirement from client where the client want a report of the vendors according to material group. There is a standard report for this in SAP T.C.---- ME6B. But this report is not working . it is throwing message that no vendor exi
-
re lightroom: I dont see the lens profile for my SIGMA 50mm F1.4 EX DG HSM, how do I add it?
-
Report the results of a subsequenc​e
My problem is the subsequences are not logged into the report. What can I do? (The option "Record Results"[Run Options] is marked.)
-
HPCM Error - Model definition changed since last calculation
Hi everyone, I am having a bit of an issue on an HPCM app. 1)Warning message when I go to Balancing -> "the model has changed since last calculation." 2)Message when I select reporting cube in Balancing -> "the reporting database has not been updated
-
Just today our remote for Apple TV 2 won't click up. The click sound is even gone. Any ideas?