Reporting Problems on Beta Server

Regarding the beta server at http://htmldb.oracle.com/pls/otn, is there a protocol to report problems on this server? For example, I was doing some development work this morning using the westend workspace and launched an infinite loop by mistake. Oops... my bad. I'm not in any hurry to fix it but it's certainly a drain on the system and it must be annoying to other users who experience a slow-down in performance. It would be useful to be able to report a mistake right away. I can't see any of the dictionary views to tell if it's still running, but the system behaves as if I have some DDL locks as a result of this particular process. I can understand that it might be a pain to set up a system to report problems so I'm wondering if setting a cpu limit/call would be a prudent method of eliminating run-away processes.

Jeff,
There is no formal process to report this type of issue. This OTN forum is probably the best mechanism.
This is not a reason to not be concerned about infinite loops, but there is a resource profile in place on htmldb.oracle.com and it seems to have sniped your runaway session.
Joel

Similar Messages

Problem is saving crystal reports to SAP BI server

Hi,
we have installed the crystal report 2008 and the SAP add-on on the desktop.
we have designed a formatted report in crystal report designer using an existing BW report that was created using Bex query designer. After this its askign for the BW role to save. Which BW role we need to give?
We have not published the report to crystal enterprise server, since the connection to same is not in place.
We would like to know how to publish this report in Enterprise portal ?
Can we bypass publishing the report to crystal enterprise server and publish the report on browser or through EP ?

Post Author: bettername
CA Forum: General
Ditto!
There are some software packages to convert from CR to RS, but none work 100% AFAIK, and will require manual tuning.
Seems like a big hassle and learning curve just to get reports published via another method - I know I'd put up huge resistance if they tried to take my CR away from me!

"problem connecting to server" when trying to access local disk

Recently (perhaps since I upgraded to Yosemite), the first time I try access one of my two hard drives through Finder I get two pop-up windows with error "there was a problem connecting to server". When I dismiss the pop-ups, the Finder window appears OK. I then don't get these errors for some time and then I get them again - and always two errors.
It seems the access request goes through NAS which fails ...
"NetAuthSysAgent[11958]: ERROR: AFP_GetServerInfo - connect failed 62"
and "NetAuthSysAgent[11958]: GetStatus: connecting to self not allowed"
but then it gets actioned as a local access. Can anyone think of why NAS gets involved? And mainly how to get rid of it :^).
There is nothing in login items that mounts either of the disks as a server. Is there a way to find out if a local disk is mounted as a server and who caused it?

Many thanks, I am impressed by the process :^)
Here's the result:
Start time: 23:05:00 04/03/15
Revision: 1310
Model Identifier: iMac12,2
System Version: OS X 10.10.2 (14C1514)
Kernel Version: Darwin 14.1.0
Time since boot: 10:04
UID: 501
SerialATA
    Hitachi HDS723020BLA642
Bluetooth
    Apple Wireless Keyboard
    Apple Wireless Trackpad
Energy (lifetime)
    kernel_task (UID 0): 7.72
Energy (sampled)
    kernel_task (UID 0): 7.09
Font issues: 60
Nets
    en0 192.168.2
    en1 192.168.1
Listeners
    AppleFileServer: afpovertcp
    kdc: kerberos
    launchd: afpovertcp
    launchd: microsoft-ds
System caches/logs
    5.1 GiB: /System/Library/Caches/com.apple.coresymbolicationd/data
Diagnostic reports
    2015-03-08 rapportd crash x2
    2015-03-11 rapportd crash
    2015-03-12 garcon crash
    2015-03-12 rapportd crash
    2015-03-14 MPEG Streamclip hang x2
    2015-03-19 secd crash x4
    2015-03-20 rapportd crash
    2015-03-21 rapportd crash
    2015-04-02 rapportd crash
    2015-04-03 rapportd crash x4
HID errors: 16
Kernel log
    Apr 3 11:33:33 vmnet: VMNetConnect: returning port 0xffffff8035f87a00
    Apr 3 11:33:33 vmnet: VMNetConnect: returning port 0xffffff80372f3000
    Apr 3 11:33:33 vmnet8: failed to restore 1 suspended link-layer multicast membership(s) (err=102)
    Apr 3 11:33:33 vmnet: VMNetConnect: returning port 0xffffff80386a1200
    Apr 3 11:33:50 IOAudioStream[0xffffff8031dd3000]::clipIfNecessary() - Error: counted 1 clip more than one buffer ahead errors.
    Apr 3 11:34:12 vmnet: netif-vmnet1: SIOCPROTODETACH failed: 16.
    Apr 3 11:34:12 vmnet: netif-vmnet8: SIOCPROTODETACH failed: 16.
    Apr 3 11:37:58 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
    Apr 3 12:01:20 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
    Apr 3 12:02:34 considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
    Apr 3 12:12:35 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
    Apr 3 13:00:53 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
    Apr 3 13:05:54 vmnet: VMNetConnect: returning port 0xffffff80162d8e00
    Apr 3 13:05:54 vmnet: VMNetConnect: returning port 0xffffff80199de600
    Apr 3 13:05:55 vmnet: VMNetConnect: returning port 0xffffff8022753a00
    Apr 3 13:05:55 vmnet: VMNetConnect: returning port 0xffffff8019ca0000
    Apr 3 13:05:55 vmnet: VMNetConnect: returning port 0xffffff80150d1a00
    Apr 3 13:05:55 vmnet: VMNetConnect: returning port 0xffffff80199c5e00
    Apr 3 13:06:06 vmnet: VMNetConnect: returning port 0xffffff801ad23600
    Apr 3 13:06:06 vmnet: VMNetConnect: returning port 0xffffff80162d8e00
    Apr 3 16:18:10 ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xffffff801cb013d8
    Apr 3 19:10:14 ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xffffff8015cd4000
    Apr 3 22:07:55 ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xffffff80154a2000
    Apr 3 22:50:17 vmnet: netif-vmnet1: SIOCPROTODETACH failed: 16.
    Apr 3 22:50:17 vmnet: netif-vmnet8: SIOCPROTODETACH failed: 16.
System log
    Apr 3 16:13:20 fseventsd: Logging disabled completely for device:1: /Volumes/Recovery HD
    Apr 3 16:13:20 AppleFileServer: GetAttrListStandardVolumeInfo: getattrlist failed with errno: 2!
    Apr 3 16:17:59 diskarbitrationd: mds [32]:21519 not responding.
    Apr 3 16:18:09 AppleFileServer: GetAttrListStandardVolumeInfo: getattrlist failed with errno: 2!
    Apr 3 16:28:22 WindowServer: WSGetSurfaceInWindow : Invalid surface 474164185 for window 2896
    Apr 3 17:17:35 Google Chrome Helper: CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
    Apr 3 17:17:35 Google Chrome Helper: CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
    Apr 3 17:17:35 Google Chrome Helper: CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
    Apr 3 17:17:35 Google Chrome Helper: CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
    Apr 3 19:00:54 NetAuthSysAgent: TUAMHandler::SetUAMType setting UAMType to 13
    Apr 3 19:01:13 AppleFileServer: GetAttrListStandardVolumeInfo: getattrlist failed with errno: 2!
    Apr 3 19:01:15 AppleFileServer: GetAttrListStandardVolumeInfo: getattrlist failed with errno: 2!
    Apr 3 19:07:07 fseventsd: Logging disabled completely for device:1: /Volumes/Recovery HD
    Apr 3 19:07:07 AppleFileServer: GetAttrListStandardVolumeInfo: getattrlist failed with errno: 2!
    Apr 3 19:10:13 AppleFileServer: GetAttrListStandardVolumeInfo: getattrlist failed with errno: 2!
    Apr 3 22:00:54 NetAuthSysAgent: TUAMHandler::SetUAMType setting UAMType to 13
    Apr 3 22:01:13 AppleFileServer: GetAttrListStandardVolumeInfo: getattrlist failed with errno: 2!
    Apr 3 22:01:15 AppleFileServer: GetAttrListStandardVolumeInfo: getattrlist failed with errno: 2!
    Apr 3 22:07:38 fseventsd: Logging disabled completely for device:1: /Volumes/Recovery HD
    Apr 3 22:07:38 AppleFileServer: GetAttrListStandardVolumeInfo: getattrlist failed with errno: 2!
    Apr 3 22:07:55 AppleFileServer: GetAttrListStandardVolumeInfo: getattrlist failed with errno: 2!
    Apr 3 22:50:17 vmnet-dhcpd: select: Interrupted system call
    Apr 3 22:50:17 vmnet-dhcpd: exiting.
    Apr 3 22:50:17 vmnet-dhcpd: select: Interrupted system call
    Apr 3 22:50:17 vmnet-dhcpd: exiting.
launchd log
    Apr 3 12:01:27 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.187, service = com.evernote.EvernoteHelper, error = 119: Service is disabled
    Apr 3 12:01:27 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.187, service = com.freshsqueezedapps.memoryboosterlauncher, error = 119: Service is disabled
    Apr 3 12:01:27 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.187, service = com.fiplab.MemoryCleanHelper, error = 119: Service is disabled
    Apr 3 12:01:27 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.187, service = QA2G25RMZ4.com.wunderkinder.wunderlist-helper, error = 119: Service is disabled
    Apr 3 12:12:40 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.188, service = com.deskconnect.mac.helper, error = 119: Service is disabled
    Apr 3 12:12:40 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.188, service = net.doo.dooLoginHelper, error = 119: Service is disabled
    Apr 3 12:12:40 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.188, service = com.evernote.EvernoteHelper, error = 119: Service is disabled
    Apr 3 12:12:40 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.188, service = com.freshsqueezedapps.memoryboosterlauncher, error = 119: Service is disabled
    Apr 3 12:12:40 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.188, service = com.fiplab.MemoryCleanHelper, error = 119: Service is disabled
    Apr 3 12:12:40 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.188, service = QA2G25RMZ4.com.wunderkinder.wunderlist-helper, error = 119: Service is disabled
    Apr 3 13:00:58 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.187, service = com.deskconnect.mac.helper, error = 119: Service is disabled
    Apr 3 13:00:58 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.187, service = net.doo.dooLoginHelper, error = 119: Service is disabled
    Apr 3 13:00:58 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.187, service = com.evernote.EvernoteHelper, error = 119: Service is disabled
    Apr 3 13:00:58 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.187, service = com.freshsqueezedapps.memoryboosterlauncher, error = 119: Service is disabled
    Apr 3 13:00:58 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.187, service = com.fiplab.MemoryCleanHelper, error = 119: Service is disabled
    Apr 3 13:00:58 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.187, service = QA2G25RMZ4.com.wunderkinder.wunderlist-helper, error = 119: Service is disabled
    Apr 3 14:01:57 com.citrixonline.GoToMeeting.G2MUpdate: Service could not initialize: 14C1514: xpcproxy + 14045 [1344][UUID]: 0x2
    Apr 3 15:02:57 com.citrixonline.GoToMeeting.G2MUpdate: Service could not initialize: 14C1514: xpcproxy + 14045 [1344][UUID]: 0x2
    Apr 3 16:03:57 com.citrixonline.GoToMeeting.G2MUpdate: Service could not initialize: 14C1514: xpcproxy + 14045 [1344][UUID]: 0x2
    Apr 3 17:04:57 com.citrixonline.GoToMeeting.G2MUpdate: Service could not initialize: 14C1514: xpcproxy + 14045 [1344][UUID]: 0x2
    Apr 3 18:05:57 com.citrixonline.GoToMeeting.G2MUpdate: Service could not initialize: 14C1514: xpcproxy + 14045 [1344][UUID]: 0x2
    Apr 3 19:06:57 com.citrixonline.GoToMeeting.G2MUpdate: Service could not initialize: 14C1514: xpcproxy + 14045 [1344][UUID]: 0x2
    Apr 3 20:07:56 com.citrixonline.GoToMeeting.G2MUpdate: Service could not initialize: 14C1514: xpcproxy + 14045 [1344][UUID]: 0x2
    Apr 3 21:08:56 com.citrixonline.GoToMeeting.G2MUpdate: Service could not initialize: 14C1514: xpcproxy + 14045 [1344][UUID]: 0x2
    Apr 3 22:09:56 com.citrixonline.GoToMeeting.G2MUpdate: Service could not initialize: 14C1514: xpcproxy + 14045 [1344][UUID]: 0x2
Console log
    Apr 3 12:01:26 fontd: Failed to open read-only database, regenerating DB
System services loaded
    com.adobe.fpsaud
    com.apple.AccountPolicyHelper
    com.apple.GSSCred
    com.apple.MobileFileIntegrity
    com.apple.awdd
    com.apple.coresymbolicationd
    com.apple.ctkd
    com.apple.icloud.findmydeviced
    com.apple.iconservices.iconservicesagent
    com.apple.ifdreader
    com.apple.nehelper
    com.apple.nsurlsessiond_privileged
    com.apple.nsurlstoraged
    com.apple.periodic-daily
    com.apple.sandboxd
    com.apple.secinitd
    com.apple.softwareupdated
    com.apple.systemadministration.writeconfig
    com.apple.tccd.system
    com.apple.wdhelper
    com.apple.xpc.smd
    com.barebones.authd
    com.barebones.textwrangler
    com.google.GoogleML
    - status: 1
    com.oracle.java.Helper-Tool
    com.timesoftware.timemachineeditor.backup-auto
    com.trusteer.rooks.rooksd
    org.macosforge.xquartz.privileged_startx
System services disabled
    com.apple.mrt
Login services loaded
    com.adobe.ARM.UUID
    com.apple.AirPlayUIAgent
    com.apple.CallHistoryPluginHelper
    com.apple.CallHistorySyncHelper
    com.apple.cloudd
    com.apple.coreservices.appleid.authentication
    com.apple.icloud.fmfd
    com.apple.mrt.uiagent
    com.apple.nsurlsessiond
    com.apple.recentsd
    com.apple.scopedbookmarksagent.xpc
    com.apple.soagent
    com.apple.spindump_agent
    com.apple.telephonyutilities.callservicesd
    com.citrixonline.GoToMeeting.G2MUpdate
    - status: 78
    com.divx.agent.postinstall
    com.f-secure.sync.BTCloud
    com.google.keystone.system.agent
    com.kodak.BonjourAgent
    com.kodak.KODAK AiO Annual Opt
    com.kodak.KODAK AiO Firmware Updater
    com.kodak.KODAK AiO Software Updater
    com.oracle.java.Java-Updater
    com.trusteer.rapport.rapportd
    - status: -11
    org.macosforge.xquartz.startx
Login services disabled
    com.evernote.EvernoteHelper
User services loaded
    com.apple.BKAgentService
    com.apple.DataDetectorsDynamicData
    com.apple.InputMethodKit.UserDictionary
    com.apple.MailServiceAgent
    com.apple.geod
    com.apple.imdpersistence.IMDPersistenceAgent
    com.apple.security.cloudkeychainproxy3
    com.apple.tonelibraryd
User services disabled
    com.evernote.EvernoteHelper
Startup items
    /Library/StartupItems/BRESINKx86Monitoring/BRESINKx86Monitoring
    /Library/StartupItems/BRESINKx86Monitoring/BRESINKx86Monitoring.kext/Contents/I nfo.plist
    /Library/StartupItems/BRESINKx86Monitoring/BRESINKx86Monitoring.kext/Contents/M acOS/BRESINKx86Monitoring
    /Library/StartupItems/BRESINKx86Monitoring/StartupParameters.plist
    /Library/StartupItems/CoreDuoTemp/CoreDuoTemp
    /Library/StartupItems/CoreDuoTemp/StartupParameters.plist
    /Library/StartupItems/MTU/MTU
    /Library/StartupItems/MTU/StartupParameters.plist
User login items
    aLaunch
    - /Applications/aLaunch/aLaunch.app
    Alfred 2
    - /Applications/Alfred 2.app
    Meteorologist
    - /Applications/Utilities/meteo/Meteorologist.app
    AllBookmarks
    - /Applications/u-internet/AllBookmarks.app
    Yahoo! Widgets
    - /Applications/Yahoo! Widgets.app
    Dropbox
    - /Applications/Dropbox.app
Safari extensions
    AdBlock
    - com.betafish.adblockforsafari
    Amazon Shopping Assistant
    - com.spigot.safari.amazonshopassist
    DivX Plus Web Player HTML5 <video>
    - com.divx.DivXHTML5
    Ebay Shopping Assistant
    - com.spigot.safari.ebayshopassist
    iTube Studio
    - com.wondershare.safari.itubestudio
    Omnibar
    - com.genieo.safari
    Searchme
    - com.spigot.safari.searchme
    Translate
    - com.sidetree.Translate
    Validator
    - be.grincheux.validator
    View Style Sheets
    - com.sonereker.vss
Firefox extensions
    Status-4-Evar
    ImTranslator - Google Translator
    Test Pilot
    Ilana Segall
    Flash Video Downloader - YouTube HD Download [4K]
    LastPass Password Manager
    DownThemAll!
    Stefano Verna
Widgets
    AccuWeather.com
    Time Machine Buddy
iCloud errors
    bird 561
    cloudd 108
    comapple.InputMethodKit.UserDictionary 1
    Finder 1
Continuity errors
    sharingd 9
Restricted files: 346
Lockfiles: 6
High file counts
    Desktop: 66
Accessibility
    Keyboard Zoom: On
Contents of /Library/LaunchAgents/com.kodak.BonjourAgent.plist
    - mod date: Sep 21 07:39:00 2012
    - size (B): 528
    - checksum: 2625351456
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Kodak Version</key>
    <string>7.1.6.10</string>
    <key>Label</key>
    <string>com.kodak.BonjourAgent</string>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Printers/Kodak/AiO_Printers/KodakAiOBonjourAgent.app/Contents/ MacOS/KodakAiOBonjourAgent</string>
    </array>
    <key>ServiceIPC</key>
    <true/>
    </dict>
    </plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
    - mod date: Feb 6 16:00:20 2013
    - size (B): 104
    - checksum: 2306977922
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.oracle.java.Java-Updater</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
    <string>-bgcheck</string>
    </array>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>3</integer>
    <key>Minute</key>
    <integer>8</integer>
    <key>Weekday</key>
    <integer>1</integer>
    </dict>
    </dict>
    ...and 1 more line(s)
Contents of /Library/LaunchAgents/com.trusteer.rapport.rapportd.plist
    - mod date: Sep 5 10:14:40 2010
    - size (B): 549
    - checksum: 4018397927
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.trusteer.rapport.rapportd</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Rapport/bin/rapportd</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>WorkingDirectory</key>
    <string>/Library/Rapport/bin</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Umask</key>
    <integer>18</integer>
    </dict>
    </plist>
Contents of /Library/LaunchAgents/org.macosforge.xquartz.startx.plist
    - mod date: Aug 11 22:52:54 2014
    - size (B): 721
    - checksum: 2451978492
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>org.macosforge.xquartz.startx</string>
    <key>ProgramArguments</key>
    <array>
    <string>/opt/X11/lib/X11/xinit/launchd_startx</string>
    <string>/opt/X11/bin/startx</string>
    <string>--</string>
    <string>/opt/X11/bin/Xquartz</string>
    </array>
    <key>Sockets</key>
    <dict>
    <key>org.macosforge.xquartz:0</key>
    <dict>
    <key>SecureSocketWithKey</key>
    <string>DISPLAY</string>
    </dict>
    </dict>
    <key>ServiceIPC</key>
    <true/>
    <key>EnableTransactions</key>
    <true/>
    ...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.barebones.authd.plist
    - mod date: May 15 22:46:29 2012
    - size (B): 634
    - checksum: 1995816654
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>EnableTransactions</key>
    <true/>
    <key>Label</key>
    <string>com.barebones.authd</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/PrivilegedHelperTools/com.barebones.authd</string>
    </array>
    <key>Sockets</key>
    <dict>
    <key>com.barebones.authd.socket</key>
    <dict>
    <key>SockPathMode</key>
    <integer>438</integer>
    <key>SockPathName</key>
    <string>/var/tmp/com.barebones.authd.socket</string>
    </dict>
    </dict>
    </dict>
    </plist>
Contents of /Library/LaunchDaemons/com.barebones.textwrangler.plist
    - mod date: Mar 31 11:41:07 2012
    - size (B): 802
    - checksum: 2824893286
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.barebones.textwrangler</string>
    <key>OnDemand</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/PrivilegedHelperTools/com.barebones.textwrangler</string>
    </array>
    <key>ServiceIPC</key>
    <true/>
    <key>Sockets</key>
    <dict>
    <key>MasterSocket</key>
    <dict>
    <key>SockFamily</key>
    <string>Unix</string>
    <key>SockPathMode</key>
    <integer>438</integer>
    <key>SockPathName</key>
    ...and 7 more line(s)
Contents of /Library/LaunchDaemons/com.google.GoogleML.plist
    - mod date: Mar 10 17:19:30 2008
    - size (B): 684
    - checksum: 315725308
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.google.GoogleML</string>
    <key>OnDemand</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Google/GoogleML/GoogleML.bundle/Contents/MacOS/googleml-modwat ch</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
    <key>UserName</key>
    <string>root</string>
    <key>WatchPaths</key>
    <array>
    <string>/Library/Google/GoogleML/Modules</string>
    <string>/Library/Google/GoogleML</string>
    </array>
    </dict>
    </plist>
Contents of /Library/LaunchDaemons/com.timesoftware.timemachineeditor.backup-auto.plist
    - mod date: Oct 29 02:09:28 2013
    - size (B): 491
    - checksum: 39878998
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.timesoftware.timemachineeditor.backup-auto</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/PrivilegedHelperTools/com.timesoftware.timemachineeditor.helpe r</string>
    <string>--backup</string>
    </array>
    <key>StartInterval</key>
    <integer>10800</integer>
    </dict>
    </plist>
Contents of /Library/LaunchDaemons/com.trusteer.rooks.rooksd.plist
    - mod date: Oct 25 10:03:22 2010
    - size (B): 376
    - checksum: 1478412778
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.trusteer.rooks.rooksd</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Rapport/bin/rooksd</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    </dict>
    </plist>
Contents of /private/etc/auto_master
    - mod date: Nov 28 19:07:15 2013
    - size (B): 195
    - checksum: 1600620026
    +auto_master # Use directory service
    /home auto_home -nobrowse,hidefromfinder
    /Network/Servers -fstab
    /- -static
Contents of /private/etc/auto_master.backup
    - mod date: Nov 28 19:05:07 2013
    - size (B): 194
    - checksum: 3752790267
    +auto_master # Use directory service
    /net -hosts -nobrowse,hidefromfinder,nosuid
    /home auto_home -nobrowse,hidefromfinder
    /Network/Servers -fstab
    /- -static
Contents of /private/etc/auto_master~orig
    - mod date: Sep 19 08:15:44 2014
    - size (B): 194
    - checksum: 3752790267
    +auto_master # Use directory service
    /net -hosts -nobrowse,hidefromfinder,nosuid
    /home auto_home -nobrowse,hidefromfinder
    /Network/Servers -fstab
    /- -static
Contents of /private/etc/ssh_config
    - mod date: Nov 15 13:07:00 2013
    - size (B): 3957
    - checksum: 2841432291
     Host *
       SendEnv LANG LC_*
    Host *
        XAuthLocation /opt/X11/bin/xauth
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
    - mod date: Apr 1 12:59:17 2010
    - size (B): 589
    - checksum: 2544798274
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Reader 8/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.apple.FolderActions.folders.plist
    - mod date: Feb 17 02:43:15 2015
    - size (B): 759
    - checksum: 354310561
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.apple.FolderActions.folders</string>
    <key>Program</key>
    <string>/usr/bin/osascript</string>
    <key>ProgramArguments</key>
    <array>
    <string>osascript</string>
    <string>-e</string>
    <string>tell application "Folder Actions Dispatcher" to tick</string>
    </array>
    <key>WatchPaths</key>
    <array>
    <string>/Volumes/Macintosh HD 2/Pictures/fa-jpg</string>
    <string>/Volumes/Macintosh HD 2/Pictures/fa-L</string>
    <string>/Volumes/Macintosh HD 2/Pictures/fa-R</string>
    <string>/Volumes/Macintosh HD 2/Pictures/ap-copy</string>
    </array>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.divx.agent.postinstall.plist
    - mod date: Feb 4 12:10:23 2012
    - size (B): 695
    - checksum: 3163907459
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.divx.agent.postinstall</string>
    <key>LimitToSessionType</key>
    <string>Aqua</string>
    <key>LaunchOnlyOnce</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>//Library/Internet Plug-Ins/DivXBrowserPlugin.plugin/Contents/Resources/extensions-installer</stri ng>
    <string>install</string>
    <string>safari</string>
    <string>DivXHTML5</string>
    <string>//Library/Internet Plug-Ins/DivXBrowserPlugin.plugin/Contents/Resources/DivXHTML5.safariextz</stri ng>
    </array>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.f-secure.sync.BTCloud.plist
    - mod date: Oct 11 11:46:27 2013
    - size (B): 423
    - checksum: 1294862215
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.f-secure.sync.BTCloud</string>
            <key>RunAtLoad</key>
            <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/BT Cloud.app/Contents/MacOS/BT Cloud</string>
    </array>
    </dict>
    </plist>
Bad plists
    Library/Preferences/com.macxtosh.SaveCircle1.2.plist
Extensions
    /System/Library/Extensions/ElmediaPlayer.kext
    - com.eltima.ElmediaPlayer.kext
    /System/Library/Extensions/JMicronATA.kext
    - com.jmicron.JMicronATA
    /System/Library/Extensions/UsbEthernetGadget.kext
    - com.tomtom.driver.UsbEthernetGadget
    /System/Library/Extensions/speedit.kext
    - com.increw.kext.speedit
Applications
    /Applications/ActiveState ActiveTcl/tclvfse.app
    - com.activestate.pkg.ActiveTcl.tclvfse
    /Applications/Adobe Reader 8/Adobe Reader.app
    - com.adobe.Reader
    /Applications/AllVideoDownloader.app
    - com.yourcompany.AllVideoDownloader
    /Applications/BBC iPlayer Desktop.app
    - BBCiPlayerDesktop.UUID.1
    /Applications/BT Home Hub/BT Broadband Life.app
    - com.bt.BTBroadbandLife
    /Applications/BT Home Hub/BT Yahoo! Online.app
    - com.bt.BTBroadband
    /Applications/BT Home Hub/HubManager.app
    - com.bt.HubManager
    /Applications/Buzan's iMindMap.app
    - com.Buzan Online.Buzan's iMindMap V3.Buzan's iMindMap
    /Applications/DVD Creator/DVD Creator.app
    - N/A
    /Applications/DeepVacuum.app
    - com.hexcat.deepvacuum
    /Applications/DivX Plus Player.app
    - com.divx.DivX_Plus_Player
    /Applications/FrostWire.app
    - N/A
    /Applications/GIMP.app
    - org.gimp.gimp
    /Applications/Google Desktop/Google Gadgets.app
    - com.google.GadgetToWidgetConvertor
    /Applications/Google Notifier.app
    - com.google.GmailNotifier
    /Applications/Google Updater Ghost.app
    - com.google.Updater
    /Applications/Guitar Pro/GuitarPro.app
    - com.arobas-music.GuitarPro
    /Applications/LimeWire.app
    - com.limegroup.gnutella
    /Applications/Mac CD DVD Label Maker.app
    - com.cristallight.cdlm
    /Applications/Mac PDF Password Remover.app
    - com.Doremisoft.Mac_PDF_Password_Remover
    /Applications/MkvMerge.app
    - org.matroska.mkvmerge
    /Applications/NeoOffice.app
    - org.neooffice.NeoOffice
    /Applications/Open XML Converter.app
    - com.microsoft.OfficeConverter
    /Applications/Paintbrush.app
    - com.soggywaffles.Paintbrush
    /Applications/PersonalBrain.app
    - com.install4j.1190-3857-8766-9166.5
    /Applications/Picasa Web Albums Uploader.app
    - com.google.macphotouploader
    /Applications/Python 3.4/IDLE.app
    - org.python.IDLE
    /Applications/Python 3.4/Python Launcher.app
    - org.python.PythonLauncher
    /Applications/SeaMonkey.app
    - org.mozilla.SeaMonkey
    /Applications/SiteSucker.app
    - us.sitesucker.mac.sitesucker
    /Applications/Sound Recorder Mac.app
    - de.monkeybreadsoftware.freeware.soundrecorder
    /Applications/StuffIt/StuffIt Expander.app
    - com.stuffit.Expander
    /Applications/Style Master 4.6.1 Demo/Style Master.app
    - N/A
    /Applications/TeamViewer 7/TeamViewer.app
    - com.teamviewer.TeamViewer
    /Applications/TeamViewer 7/Uninstall TeamViewer.app
    - com.teamviewer.Uninstall-TeamViewer
    /Applications/Utilities/APGrapher/AP Grapher.app
    - com.chimoosoft.apgrapher
    /Applications/Utilities/Adobe AIR Application Installer.app
    - com.adobe.air.ApplicationInstaller
    /Applications/Utilities/Adobe AIR Uninstaller.app
    - com.adobe.air.Installer
    /Applications/Utilities/Adobe Utilities.localized/Adobe Updater5/Adobe Updater.app
    - "com.Adobe.ESD.AdobeUpdaterApplication"
    /Applications/Utilities/Aluminum Keyboard Firmware Update.app
    - com.apple.keyboardupdater.89.1
    /Applications/Utilities/CSSEdit.app
    - com.macrabbit.CSSEdit
    /Applications/Utilities/ChronoSync.app
    - com.econtechnologies.chronosync
    /Applications/Utilities/CocoaJT.app
    - net.cocoanut.cocoajt
    /Applications/Utilities/Coda.app
    - com.panic.Coda
    /Applications/Utilities/FreeMind.app
    - freemind.main.FreeMind
    /Applications/Utilities/Kext Utility.app
    - ru.cvad.KextUtility
    /Applications/Utilities/Kext Wizard/Kext Wizard.app
    - janek202.Kext-Wizard
    /Applications/Utilities/RAGE SEKeyword.app
    - com.ragesw.sekeyword
    /Applications/Utilities/RAGE WebDesign/WebDesign.app
    - com.ragesw.webdesign
    /Applications/Utilities/Simple CSS.app
    - com.acreon.simplecss
    /Applications/Utilities/SymbolicLinker/SymbolicLinker.service
    - net.comcast.home.seiryu.SymbolicLinker
    /Applications/Utilities/Taco HTML Edit.app
    - com.tacosoftware.HTMLEdit
    /Applications/Utilities/Uninstall Rapport.app
    - N/A
    /Applications/Utilities/WakeOnLan/WakeOnLan.app
    - com.readpixel.wakeonlan
    /Applications/Utilities/WebArchive Extractor.app
    - com.robrohan.WebArchiveExtractor
    /Applications/Utilities/XQuartz.app
    - org.macosforge.xquartz.X11
    /Applications/Utilities/iStumbler.app
    - net.istumbler.release-99
    /Applications/Utilities/language/Asia Text Extras/Chinese Text Converter.app
    - com.apple.ChineseTextConverter
    /Applications/Utilities/language/Asia Text Extras/IM Plugin Converter.app
    - com.apple.IMPluginConverter
    /Applications/Utilities/language/Before You Know It/Before You Know It.app
    - com.transparentlanguage.BYKIViewer
    /Applications/Utilities/meteo/Meteorologist.app
    - com.heat.meteo
    /Applications/Utilities/music/Intervals.app
    - com.Matt.Intervals
    /Applications/Utilities/system/7z/7zX.app
    - com.sixtyfive.7zX
    /Applications/Utilities/system/AppDelete.app
    - com.apps4macs.AppDelete
    /Applications/Utilities/system/CLIX/CLIX-32/CLIX.app
    - com.rixstep.CLIX
    /Applications/Utilities/system/CLIX/CLIX-64/CLIX.app
    - com.rixstep.CLIX
    /Applications/Utilities/system/FormulatePro.app
    - info.adlr.formulatepro
    /Applications/Utilities/system/GeekTool/GeekTool Uninstaller.app
    - org.tynsoe.geektooluninstaller
    /Applications/Utilities/system/IceClean.app
    - com.MacDentro.IceClean
    /Applications/Utilities/system/KeePassX.app
    - com.apple.application-bundle
    /Applications/Utilities/system/LaunchBar.app
    - at.obdev.LaunchBar4
    /Applications/Utilities/system/Mac HelpMate.app
    - com.most.mhm
    /Applications/Utilities/system/MacDjView.app
    - org.andrew.zhezherun.macdjview
    /Applications/Utilities/system/MenuMeters/MenuMeters Installer.app
    - com.ragingmenace.MenuMetersInstaller
    /Applications/Utilities/system/Name Mangler.app
    - com.manytricks.Name Mangler
    /Applications/Utilities/system/Onyx/OnyX.app
    - com.titanium.OnyX
    /Applications/Utilities/system/Onyx/Uninstaller.app
    - com.titanium.Uninstaller
    /Applications/Utilities/system/PSRenamer/psrenamer.app
    - N/A
    /Applications/Utilities/system/PSTextMerge/pstextmerge.app
    - PSTextMerge
    /Applications/Utilities/system/Rapido/RapidoResizer.app
    - com.app4mac.RapidoResizer
    /Applications/Utilities/system/Rapido/RapidoSerial.app
    - com.app4mac.RapidoSerial
    /Applications/Utilities/system/Rapido/RapidoStart.app
    - com.app4mac.RapidoStart
    /Applications/Utilities/system/Rapido/RapidoWrite.app
    - com.app4mac.RapidoWrite3
    /Applications/Utilities/system/SMARTReporter/SMARTReporter.app
    - org.corecode.SMARTReporter
    /Applications/Utilities/system/SpotLook.app
    - ch.seriot.SpotLook
    /Applications/Utilities/system/The Unarchiver.app
    - cx.c3.theunarchiver
    /Applications/Utilities/system/Todos.app
    - com.opensoft.todos
    /Applications/Utilities/system/WhatsKeepingMe/Install Automator Workflow.app
    - N/A
    /Applications/Utilities/system/WhatsKeepingMe/What's Keeping Me?.app
    - com.HAMSoft.WhatsKeepingMe2
    /Applications/Utilities/system/iTLC.app
    - com.memention.itlc
    /Applications/Utilities/system/rar expander/Example Scripts/Replace RAR Archives with Expansion in Subfolders.app
    - N/A
    /Applications/Utilities/system/rar expander/Example Scripts/Replace RAR Archives with Expansion.app
    - N/A
    /Applications/Utilities/system/rar expander/RAR Expander.app
    - net.sourceforge.rarexpander
    /Applications/Utilities/system/uif2iso4mac.app
    - org.vafer.uif2iso4mac
    /Applications/Utilities/system/xMod.app
    - com.geekpeak.xMod
    /Applications/Utilities/z-misc/Audacity/Audacity.app
    - net.sourceforge.audacity
    /Applications/Utilities/z-misc/Stellarium/Stellarium.app
    - org.stellarium.Stellarium
    /Applications/Utilities/z-misc/iWisdom Folder/iWisdom.app
    - N/A
    /Applications/VMware Uninstall .app
    - com.vmware.fusion.uninstaller
    /Applications/Who Is Connected.app
    - com.littlemacapps.Who_Is_Connected
    /Applications/Wondershare PDF Editor Pro.app
    - com.wondershare.PDF_Editor_Pro
    /Applications/Xnntp.app
    - com.edvfz.XnFz
    /Applications/Yahoo! Widgets.app
    - com.yahoo.widgetengine
    /Applications/emlx to mbox Converter.app
    - N/A
    /Applications/iWork '08/Keynote.app
    - com.apple.iWork.Keynote
    /Applications/iWork '08/Numbers.app
    - com.apple.iWork.Numbers
    /Applications/iWork '08/Pages.app
    - com.apple.iWork.Pages
    /Applications/iWork '08/User Guides/Keynote User Guide.app
    - com.apple.KeynoteUserGuide
    /Applications/iWork '08/User Guides/Numbers User Guide.app
    - com.apple.NumbersUserGuide
    /Applications/iWork '08/User Guides/Pages User Guide.app
    - com.apple.PagesUserGuide
    /Applications/namebench.app
    - org.opensource.namebench
    /Applications/u-internet/A to G.app
    - com.bborofka.AtoG
    /Applications/u-internet/AbyssWebServer/Abyss Web Server.app
    - com.aprelium.AbyssWebServer
    /Applications/u-internet/AllBookmarks.app
    - com.agilewebsolutions.AllBookmarks
    /Applications/u-internet/Azureus.app
    - org.gudy.azureus2
    /Applications/u-internet/BitTyrant.app
    - org.gudy.azureus2bittyrant
    /Applications/u-internet/Charlotte/Charlotte.app
    - com.lifli.Charlotte
    /Applications/u-internet/Cyberduck/Cyberduck.app
    - ch.sudo.cyberduck
    /Applications/u-internet/FileZilla.app
    - de.filezilla
    /Applications/u-internet/IPNetTunerX folder/IPNetTunerX.app
    - com.sustworks.IPNetTunerX
    /Applications/u-internet/MAMP/MAMP.app
    - com.living-e.MAMP
    /Applications/u-internet/NetNewsWire.app
    - com.ranchero.NetNewsWire
    /Applications/u-internet/RAGE Domainer.app
    - com.ragesw.domainer
    /Applications/u-internet/vixy converter BETA.app
    - jp.co.sgra.vixy converter BETA
    /Applications/u-video/DVDManager.app
    - com.fennelsoftware.DVDManager
    /Applications/u-video/Dvd Hunter.app
    - org.JAres.Dvd Hunter
    /Applications/u-video/TubeTV/TubeTV.app
    - com.chimoosoft.TubeTV
    /Applications/u-video/TubeTV/iSkysoft iTube Studio.app
    - com.iSkysoft.iTube Studio
    /Applications/u-video/converters/FilmRedux.app
    - com.madhattersoft.filmredux
    /Applications/u-video/converters/Handbrake/HandBrake.app
    - fr.handbrake.HandBrake
    /Applications/u-video/converters/MacTheRipper.app
    - com.mtr3
    /Applications/u-video/converters/RipIt.app
    - com.thelittleappfactory.RipIt
    /Applications/u-video/converters/ffmpegX/ffmpegX.app
    - com.mac.homepage.major4.ffmpegX
    /Applications/u-video/converters/xACT/xACT.app
    - net.epix.crush.xact
    /Applications/u-video/iVideoWarehouse.app
    - com.OutTheDoorSoftware.iVideoWarehouse
    /Applications/u-video/macam.app
    - net.sourceforge.webcam-osx.application
    /Applications/u-video/players/Cellulo/Cellulo.app
    - fr.atvaark.cellulo
    /Applications/u-video/players/DivX Player.app
    - com.divx.DivX_Player
    /Applications/u-video/xVideoServiceThief.app
    - com.Xesc&Technology.xVideoServiceThief
    /Applications/uTorrent.app
    - com.bittorrent.uTorrent
    /Library/Application Support/ChronoSync/ChronoAgentLocal.app
    - com.econtechnologies.ChronoAgentLocal
    /Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app
    - com.econtechnologies.backgrounder.chronosync
    /Library/Application Support/Microsoft/HV1.0/Microsoft Help Viewer.app
    - com.microsoft.helpviewer
    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
    - com.microsoft.autoupdate2
    /Library/Application Support/Microsoft/Office Converter Support/Open XML for Charts.app
    - com.microsoft.openxml.chartconverter.app
    /Library/Application Support/Microsoft/Office Converter Support/Open XML for Excel.app
    - com.microsoft.openxml.excel.app
    /Library/Application Support/Microsoft/Office Converter Support/Open XML for Word.app
    - com.microsoft.openxml.word.app
    /Library/Application Support/Microsoft/Office Converter Support/pptfc.app
    - com.microsoft.openxml.powerpoint.app
    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
    - com.microsoft.silverlight.sllauncher
    /Library/Application Support/iWork '08/iWork Tour.app
    - com.apple.iWorkTour
    /Library/Documentation/HL1650_1670N/Brother Solutions Center
    - N/A
    /Library/Documentation/HL1650_1670N/Maintenance Tuto

Access Denied to report file on Windows Server 2003 Enterprise

Hi,
I have a deployment problem for which I am out of ideas. I have an ASP.NET web site deployed on a server running Windows Server 2003 R2, sp2. It makes extensive use of Crystal Reports, including both displaying them and e-mailing them to specified recipients as PDF files. It all works great.
Now I need to port the web site to a different server, running Windows Server 2003 Enterprise, sp1. The reports display fine as long as I am not trying to convert it to PDF for e-mailng. When it gets to the following line in my code:
MemoryStream memStream = (MemoryStream)rptDoc.ExportToStream(ExportFormatType.PortableDocFormat);
It reports the following error:
Access denied.Error in File JobDetails {DC64A5D3-9DD7-4E4C-90F5-A08731409B29}.rpt:
Access to report file denied. Another program may be using it.
I finally got it to work by granting Modify permission to Everyone for the c:\Windows\Temp folder. Obviously this is not a good practice. Granting Full Control to the IUSR_servername account did not solve the problem on Windows Server Enterprise, although it did the trick on R2.
So the question is, which account needs which permission to the Temp folder to enable the PDF to get written?
Thanks.
Dan

What ever account the app is running under will need read / write permissions on the temp folder. Your working server should be a good place to look to see how the premissions were set there. The same will apply to any other server(?).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Crystal report problem

Post Author: ranganadhkodali
CA Forum: Authentication
Dear Group Members,
I have a vary big problem with crystal report XI edition, I am
unable to find the cause of the problem actually.
I am using Crystal Report XI Developer version to build
reports in my development system, which I am, using SQL server 2005 as a
backend database and u201CUn-Typedu201D Pull
model for generate reports, in that my system those are working very good.
For distribute those reports to the other clients, I was
prepared one small windows application in .net and I placed one shared
directory. Application will show all report files placed under the shared
directory by the user selection.
If User selects one report, I am taking the selected report
from the shared directory and open with the .net embedded crystal report
viewer, while opening I was filling the
server login information(By code itself).
Any way application also working very well in my development
system, for deploys this application I added crystal report redist package that
is came with the visual studio 2008.
When I run the same application, in deployed
system, it showing login database dialog with empty database name, and one more
thing is that database text box also showing like disable. So even I unable to
give database credential with in dialog. I donu2019t understood what is the cause
of the problem?
Almost same problem was happen before 4 months back for some
other project, @ that time I rebuild my report with the PUSh model, and it
working well. But this case, I donu2019t have a chance to do like that, because daily
I should generate some kind of reports, needs of management. That management
staff will check reports from with that my distributed application. For these
all things, I canu2019t rebuild and redistribute my application every time if I add
new report. So that I placed one shared folder and, I keep update all changed
reports files in that shared folder, my application will show them.
What is the cause of the problem?
Is it problem with connection? Then it should not work with
in my development system also
Then it probably problem with the deployment? Then I am able
to view the initial report, problem came only when I refresh the data?
If problems with deployment, then how it is works for push type reports, it giving problem
for only pull type reports?
thanks and regards Ranganadh Kodali

Please visit:
www.geocities.com/pmk16
Regards,
pmk16

Copying report file from one server to another requires refresh database?

Hi,
I am using Crystal Reports 11 for development.
We have a number of crystal reports that are served on a web server running classic ASP that uses these reports with Embedded Crystal Server XI installed on the server.
When I am developing or modifying a .rpt file (report) I connect to a UAT/development database on a dedicated development server.
When I am happy with the report and testing is successful I copy and paste the report onto the production server, replacing the old report.
The problem is I don't have a user account and password on the production server. Our DBAs are the only one with passwords on the prod servers. If an application needs a password entered they come to my desk and enter it for me.
The problem is in order for the modified report to work on the production, I have to call up a DBA to "verify the database" for me by connecting to production server and entering username and password.
This is really annoying.
Why can't I just disconnect\log off server in crystal reports, then copy and paste the .rpt file to prod server and be done with it?
If I had dozens of reports to change, it seems very rigid that I have to ask a DBA to enter the user account and password used by the application to run the report.
Can someone please explain how to be able to copy and paste modified reports/ or new reports from one server to another without having this problem.
Thanks
Haggisns

Moving to the Legacy SDK forum.
Crystal can be magical sometimes but if you don't tell CR where the database is how is it to know you moved it?
As you have seen and for security reasons you can't simply "drop" a report on any server and expect it to just connect to a new DB server without being asked to enter in credentials or that you have changed the DB server to report off of.... If it's too much work for the DBA to set log on info then he should give you access to so can.
Thank you
Don

Is it possible to deploy 2 SCOM 2012 R2 reporting in a SQL server which already has SCOM reporting of a different management group but with 2 different reporting instance.

Hi Experts,
I have a typical situation in the LAB environment. Hope some one helps. I have Installed a SCOM 2012 R2 with SQL 2012 SP1 in a single server (Management group 1). I have installed another management group on another server using this SQL server for its database
so i have everything going fine.
The first management group has its reporting installed in the SQL server. For the second i created a new named instance for that. But i cannot run the SCOM setup in the SQL server (Also holding the Management group 1 MS) as 1 st reporting is already there.
When i run the setup it is asking me to repair it. I don't get the install option so i can install the reporting for management group 2 in the named instance.
Default instance is being used by the 1st management group.
Can any one figure a possibility for installing 2 SCOM reporting services for different management groups in a same SQL 2012 server please.
Gautam.75801

Hi Yan Li,
Thank you for the reply. So as you are aware If i need to instal reporting, i need to run the SCOM 2012 R2 setup in the SQL server and select reporting and select the
instance and then mention the management server there right. I am not getting that option there it is asking me to remove or repair the existing installation as there is already a SCOM entire setup including reporting there. As it is a lab there is no problem
in testing. I have 2 reporting instances. Any suggestions for me on how to overcome this issue and deploy the second reporting in the new named instance ?
Below is the screenshot of the error what i am talking about when i run SCOM 2012 R2 setup to install reporting in the SQL server
When i click on add feature reporting is greyed out (As already 1st management groups reporting is installed)
When i click on remove or repair it
uninstalls the existing one. But i want both SCOM 2012 r2 reporting to be there(For both Management group). Is it possible ? If yes What is the trick to run the setup ?
Gautam.75801

A lot of problems with Lion Server in Mac Mini Server

I have a new Mac Mini Server and I have a lot of problems.
The server application works well for a day, then start to have problem, for example: I can not change the configuration of the share folder, I add a new user but he can not see some folders.
Then if I login the Mac Mini with another user, he can not see the starting folder and if you open a new folder you see a lot of strange documents.
Later, with administrator user, I can not login the server application, I put the user name and password but it refuses it (user name and passowrd are correct)
In the end I also can not login the computer.
I reinstalled the Lion Server 2 times but nothing change, after 2 days it doesn't work like before.
I'm very upset, this is the first time in more then 20 year I have a problem with an Apple computer.
What can I do?
Please help me
Thanks

Turribeach, Thanks for you time.
1. It was not a question
3. Yes, i have read platforms, but not supported datasources. Now i see, that BI 11g support as datasource Oracle DB 9.2.0.7 or higher. I am sorry.
4. I'm using OCI connection type
Now i recreate Database in Physical schema and answers is showing report data for me! But only from one table, when i use columns from to tables from one datasource, i geting error:
Error View Display Error Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 46008] Internal error: File server/Utility/Server/DataType/SUKeyCompare.cpp, line 875. (HY000) SQL Issued: SELECT s_0, s_1, s_2 FROM ( SELECT 0 s_0, "Ora10g"."hierarchy_obj_cust_v"."sort_order" s_1, "Ora10g"."NSI_SCHEMA"."SCHEMA_NAME" s_2 FROM "Ora10g" ) djm
Edited by: serzzzh on 03.09.2010 3:44

Reporting problem SCCM 2012 R2 / SQL 2012 SP2 CU 5

Hi,
i have a problem with reporting in my sccm. I had SQL 2012 SP1 without CU. after setup reporting services point in SCCM i couldnt see any report /no items found. in srsrp.log a i had this :
Registry change SMS_SRS_REPORTING_POINT 22.4.2015 13:18:30 5544 (0x15A8)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT 22.4.2015 13:18:30 5544 (0x15A8)
SRSRP registry key change notification triggered. SMS_SRS_REPORTING_POINT 22.4.2015 13:18:30 5544 (0x15A8)
Registry change SMS_SRS_REPORTING_POINT 22.4.2015 13:18:30 5544 (0x15A8)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT 22.4.2015 13:18:30 5544 (0x15A8)
Timed Out... SMS_SRS_REPORTING_POINT 22.4.2015 13:19:30 5544 (0x15A8)
Set configuration SMS_SRS_REPORTING_POINT 22.4.2015 13:19:30 5544 (0x15A8)
Check state SMS_SRS_REPORTING_POINT 22.4.2015 13:19:30 5544 (0x15A8)
Check server health. SMS_SRS_REPORTING_POINT 22.4.2015 13:19:30 5544 (0x15A8)
Successfully created srsserver SMS_SRS_REPORTING_POINT 22.4.2015 13:19:30 5544 (0x15A8)
Reporting Services URL from Registry [http://scm/ReportServer/ReportService2005.asmx] SMS_SRS_REPORTING_POINT 22.4.2015 13:19:30 5544 (0x15A8)
Reporting Services is running SMS_SRS_REPORTING_POINT 22.4.2015 13:19:30 5544 (0x15A8)
Retrieved datasource definition from the server. SMS_SRS_REPORTING_POINT 22.4.2015 13:19:30 5544 (0x15A8)
[###.cz] [CM_UB1] [Reporty] [###.cz] SMS_SRS_REPORTING_POINT 22.4.2015 13:19:30 5544 (0x15A8)
[REPORTSERVER] [1] [] [###\lankoci] SMS_SRS_REPORTING_POINT 22.4.2015 13:19:30 5544 (0x15A8)
[1] [0] SMS_SRS_REPORTING_POINT 22.4.2015 13:19:30 5544 (0x15A8)
Confirmed version [11.0.3000.0] for the Sql Srs Instance. SMS_SRS_REPORTING_POINT 22.4.2015 13:19:30 5544 (0x15A8)
Extract resource language packs if exists SMS_SRS_REPORTING_POINT 22.4.2015 13:19:30 5544 (0x15A8)
Expanding cabFile [C:\Program Files\SMS_SRSRP\SRSRP_CSY.cab] to directory [C:\Program Files\SMS_SRSRP]. SMS_SRS_REPORTING_POINT 22.4.2015 13:19:30 5544 (0x15A8)
Waiting for process ID [3980] to complete. SMS_SRS_REPORTING_POINT 22.4.2015 13:19:30 5544 (0x15A8)
Process exited with code [1]. SMS_SRS_REPORTING_POINT 22.4.2015 13:19:32 5544 (0x15A8)
Loading localization resources from directory [C:\Program Files\SMS_SRSRP\SrsResources.dll] SMS_SRS_REPORTING_POINT 22.4.2015 13:19:32 5544 (0x15A8)
Looking for 'Czech (Czech Republic)' resources SMS_SRS_REPORTING_POINT 22.4.2015 13:19:32 5544 (0x15A8)
Looking for 'Czech' resources SMS_SRS_REPORTING_POINT 22.4.2015 13:19:32 5544 (0x15A8)
Found resources for 'Czech' SMS_SRS_REPORTING_POINT 22.4.2015 13:19:32 5544 (0x15A8)
Confirmed the configuration of SRS role [ConfigMgr Report Users]. SMS_SRS_REPORTING_POINT 22.4.2015 13:19:34 5544 (0x15A8)
Confirmed the configuration of SRS role [ConfigMgr Report Administrators]. SMS_SRS_REPORTING_POINT 22.4.2015 13:19:34 5544 (0x15A8)
Retrieved datasource definition from the server. SMS_SRS_REPORTING_POINT 22.4.2015 13:19:34 5544 (0x15A8)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at Reporty SMS_SRS_REPORTING_POINT 22.4.2015 13:19:34 5544 (0x15A8)
Successfully get report server from Registry SMS_SRS_REPORTING_POINT 22.4.2015 13:19:34 5544 (0x15A8)
Moved folder from /Reporty to /Reporty.OLD.0. SMS_SRS_REPORTING_POINT 22.4.2015 13:19:34 5544 (0x15A8)
Created folder [Reporty]. SMS_SRS_REPORTING_POINT 22.4.2015 13:19:34 5544 (0x15A8)
Creating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at Reporty SMS_SRS_REPORTING_POINT 22.4.2015 13:19:34 5544 (0x15A8)
Service 'SQLSERVERAGENT' is already Stopped SMS_SRS_REPORTING_POINT 22.4.2015 13:19:34 5544 (0x15A8)
Delete old SCCMErrorResources folder SMS_SRS_REPORTING_POINT 22.4.2015 13:19:34 5544 (0x15A8)
Could not find a part of the path 'C:\SCCMErrorResources'. SMS_SRS_REPORTING_POINT 22.4.2015 13:19:35 5544 (0x15A8)
Delete all srs* files from Reporting Service Location SMS_SRS_REPORTING_POINT 22.4.2015 13:19:35 5544 (0x15A8)
(!) InitializeSrsWhenNeeded error = The parameter is incorrect. SMS_SRS_REPORTING_POINT 22.4.2015 13:19:35 5544 (0x15A8)
Failures reported during periodic health check by the SRS Server ###.cz. SMS_SRS_REPORTING_POINT 22.4.2015 13:19:35 5544 (0x15A8)
after that, i remove reporting services point and aply SP2 and CU5 for SQL.now i have this log :/
Registry change SMS_SRS_REPORTING_POINT 24.4.2015 8:03:38 6108 (0x17DC)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT 24.4.2015 8:03:38 6108 (0x17DC)
Timed Out... SMS_SRS_REPORTING_POINT 24.4.2015 8:04:38 6108 (0x17DC)
Set configuration SMS_SRS_REPORTING_POINT 24.4.2015 8:04:38 6108 (0x17DC)
Check state SMS_SRS_REPORTING_POINT 24.4.2015 8:04:38 6108 (0x17DC)
Check server health. SMS_SRS_REPORTING_POINT 24.4.2015 8:04:38 6108 (0x17DC)
Successfully created srsserver SMS_SRS_REPORTING_POINT 24.4.2015 8:04:38 6108 (0x17DC)
Reporting Services URL from Registry [http://scm/ReportServer/ReportService2005.asmx] SMS_SRS_REPORTING_POINT 24.4.2015 8:04:38 6108 (0x17DC)
System.Web.Services.Protocols.SoapException: The operation you are attempting requires a secure connection (HTTPS). ---> Microsoft.ReportingServices.Diagnostics.Utilities.SecureConnectionRequiredException: The operation you are attempting requires a secure connection (HTTPS).~ at Microsoft.ReportingServices.WebServer.RsSoapExtension.EnsureHttpsLevel(SoapMessage message)~ at Microsoft.ReportingServices.WebServer.RsSoapExtension.ProcessMessage(SoapMessage message)~ at System.Web.Services.Protocols.SoapMessage.RunExtensions(SoapExtension[] extensions, Boolean throwOnException)~ at System.Web.Services.Protocols.SoapServerProtocol.ReadParameters()~ at System.Web.Services.Protocols.WebServiceHandler.CoreProcessRequest() SMS_SRS_REPORTING_POINT 24.4.2015 8:04:38 6108 (0x17DC)
(!) SRS not detected as running SMS_SRS_REPORTING_POINT 24.4.2015 8:04:38 6108 (0x17DC)
Failures reported during periodic health check by the SRS Server ###.cz. SMS_SRS_REPORTING_POINT 24.4.2015 8:04:38 6108 (0x17DC)
much shorter..can someone help me with that?
thanks a lot
O.

Then it's not configured correctly. I suggest you go back and re-configure it. Here's a blog post that seems like it has all of the details:
http://learnsqlwithbru.com/2011/12/27/configuring-sql-server-reporting-services-in-sql-server-2012/
Jason | http://blog.configmgrftw.com | @jasonsandys

CLASSPATH problem with Application Server 8.2

Hello everyone.
i am new to using the App server 8.2 for deploying a web application. we decided to use it because we were having too many problems with Web Server.
We successfully deployed the application and it runs. however, when accessing a page with database connectivity, we get the following error:
=================================================
com.sun.rave.web.ui.appbase.ApplicationException: javax.servlet.ServletException: java.lang.RuntimeException: java.sql.SQLException: Error in allocating a connection. Cause: Class name is wrong or classpath is not set for : com.sun.sql.datasource.DriverAdapter
     com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.destroy(ViewHandlerImpl.java:601)
     com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:316)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     sun.reflect.GeneratedMethodAccessor261.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
     java.security.AccessController.doPrivileged(Native Method)
     com.sun.rave.web.ui.util.UploadFilter.doFilter(UploadFilter.java:194)
=================================================
I don't really know what that means but it looks like i need to set some sort of classpath properties. under web server 6.1, the classpath settings were those of the server's JAR file path.
i used Studio creator's remote deployment tool to deploy to AppSvr8.2.
i followed the tutorial step by step.
can someone please help me

i did what you suggested and now i get a different error: Connection could not be allocated because: com.sun.sql.jdbc.oracle.OracleDriver
see page below:
================================================
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
com.sun.rave.web.ui.appbase.ApplicationException: javax.servlet.ServletException: java.lang.RuntimeException: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: com.sun.sql.jdbc.oracle.OracleDriver
     com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.destroy(ViewHandlerImpl.java:601)
     com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:316)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
     java.security.AccessController.doPrivileged(Native Method)
     com.sun.rave.web.ui.util.UploadFilter.doFilter(UploadFilter.java:194)
================================================
thank you so much for all your help thus far!!

Deployment of reports 9i in weblogic server

anybody help me
we develop a application in java, the middle tier is weblogic server 6.1 and database is Oracle.8.1.7 and
reports 6i, we want to migrate from oracle 8.1.7 to oracle 9.2 and reports from 6i to repors 9i.
as i understand that reports9i deploy in oracle 9iAS, jsp files compiled by mod_oc4j to produce the java class files in Oracle 9iAS. is it possible to deploy the reports 9i in weblogic server 6.1. to get the jsp files to java class files,if possible what is the mechanism to use.
regards,
BhanuPrakash

Hello BhanuPrakash,
The Reports Team is currenlty looking on a 'J2EE Reports Client', we will have a better response in about a month.
note: by 'looking', I mean that we are investigate how the customer can
call reports services from a 3rd party app server - HOWEVER they will still
need to purchase AND install iAS EE (ie they will not be able to just
install reports, but they could install ias on another box).
Regards
Tugdual

JavaMail, ESMTP, problem with this server response: "+ stunnel"

I need to send message through a STMP server I don't know much about. The server works fine, when using port 25. But I need to send mail through port 465. I've looked around the web, I've searched the forums, but found no solution.
I've identified, that the server uses some kind of strange "secure" connection. I was told, that is uses SSL, but when I use SMTPSSLTransport, it says the "Unrecognized SSL, plaintext connection?". So I am using the common Transport. This is my code:
            props.put("mail.transport.protocol","smtps");
            props.put("mail.smtp.host", smtpHost);
            props.put("mail.smtp.port", 465);
            props.put("mail.smtps.starttls.enable","true");
            props.put("mail.smtps.ssl", "true");
            props.put("mail.smtps.socketFactory.port", 465);
            props.put("mail.smtps.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
            Session session = Session.getDefaultInstance(props);
            session.setDebug(true);
            Transport transport = session.getTransport();
...I am getting this output:
DEBUG: setDebug: JavaMail version 1.4.1
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth false
DEBUG SMTP: trying to connect to host "host name of the server", port 465, isSSL false
220 "host name of the server" ESMTP Sendmail 8.13.1/8.13.1; Fri, 15 Feb 2008 18:10:49 +0100
+ stunnelDEBUG SMTP: connected to host "host name of the server", port: 465
EHLO "my hostname"
DEBUG SMTP: bad server response: + stunnel
HELO "my hostname"
250-"my hostname"
WelcomeDEBUG SMTP: use8bit false
MAIL FROM:<[email protected]>
250 STARTTLS
220 Go ahead
RCPT TO:<[email protected]>
DEBUG SMTP: got response code 220, with response: 220 Go ahead
RSET
DEBUG SMTP: exception reading response: java.net.SocketException: Connection reset
javax.mail.MessagingException: Exception reading response;
nested exception is:
        java.net.SocketException: Connection resetI have no idea, what a stunnel is, but it is causing the problem, I think.
Does anybody have any ideas what can be wrong? Or does anyone know how to check the server setting? Or what properties can I try to set? (I've tried all possible options of the properties I am already setting in the code).

You're getting newline (LF without the CR)? If so,
it's possible that Thunderbird isn't seeing that as
an end of line and so considers the "+stunnel" to
be part of the greeting line.
Either way, there's something messed up in the
server configuration and you really need to report
that to the server administrator.
Also, port 465 is supposed to be an SSL port,
starting in SSL mode, not starting in plain text
mode as you're seeing. Again, this is evidence
that the server is set up incorrectly.
JavaMail will support STARTTLS just fine, and it
won't care what port you're using, but that bogus
"+stunnel" line is a protocol violation that's
confusing it. Possibly Thunderbird is taking the
approach of "throw away garbage until I see
something I recognize", but JavaMail isn't working
that way.
If this was a server on the public internet that
lots of people might encounter, I might be inclined
to add a workaround to JavaMail. But since this is
a private server that's clearly configured incorrectly
and is clearly violating the protocol, I think the best
thing to do is to get the server fixed.

Problem accessing Sql server Procedure from Crystal with JDBC driver

I have some Crystal reports using SQL Server procedures, most of them are working very well; however, I have 2 that have problems accessing sql server procedures. These reports are working using OLE DB connection without problem, but when I try to relocate the connection to JDBC Crystal generates an error like that the procedure not return records.
The procedure is working with other products including OLE DB connections from crystal.
What can I do?
Thanks in Advance,
JaimeC

I am using:
Crystal report 11 - 11.0.0.1282 and Crystal 2008 = 12.0.0.683
SQL Server 2005 - Microsoft SQL Server Management Studio Express 9.00.4035.00
Windows XP
I have discovered that the procedures create and work temporary tables. In other cases when is working ok, the procedures have not working temporary tables.
Thanks,
Jaime Carrillo

How to export an eloqua report to a (ftp) server and schedule this export

I would like to export an eloqua report to a (ftp) server and schedule this export. I want to pick this report up by another tool like Qlikview.
Liesbeth

if it is something to do with having report admin rights is there a way to still export report data without these admin rights? is it possible to just export report data as activity data in the normal import/export section within the setup menu? is there a problem using filezilla client and oracle eloqua together for this?

Interactive Reporting 9.3.1 - Server-side ODBC setup for Windows Authent.

Help. I am having a problem with Interactive Reporting connections to SQL server through the Web Client.
In our environment, we have the Hyperion BI 9.3.1 suite. We develop IR documents (BQY's) on our local machine using Studio and using locally setup ODBC connections to SQL Server, using Windows NT authentication. Everything works perfectly fine, locally.
When we upload the BQY and the OCE, and properly associate them to each other in Workspace, we then proceed to open them using the Web Client. The file opens fine, and when I hit process to run the query, I am prompted to login. When I login (using my NT Authenticated login), I receive the following error message: "Error Logging on as Windows User: Win32 Error code: 1385 Logon failure: the user has not been granted the requested logon type at this computer."
The ODBC that was setup on the server was setup to use NT Authentication (as opposed to SQL server). The DAS connections are setup properly. My question is - how do you setup a connection to a SQL server using NT authentication and have the user authenticate through the Web Client. We don't want to grant users access to the server directly.
If you can't answer this question, can you tell me how you have setup your connections on the server through DAS and how you properly maintained security controls?
Thanks - Mike

its not really in the bqy (its in the oce) but I understand your point. Now we get to the point It s not my expertiece any more but perhaps something like row level security or making use of odsusername variable might give some solution or workaround. sometimes this how we solve it when it comes to sensitive information from a app DB. We retrieve users security from the db app and use it as a where clause in the bqy. as long as endusers do not have enough right to change the query its enough.

Reporting Problems on Beta Server

Similar Messages

Maybe you are looking for