Reports 6i & pie charts

Hi,
I am using reports 6i.Created a pie chart . but for some reason the legend is not showing up.. can some one help me out with this.
Thanks.

Ok for those of you who have come across this problem or may come across it in the future... CrystalReports for VS 2005 lacks most of the chart creation and modification functionality found in standard CR. Solution? You have buy the CrystalReports Developer XI R2 to upgrade the CrystalReports for VisualStudio 2005 Pro.
This upgrade allows you to access chart objects such as the Edit Axis Label function to rename labels. In fact I recommend the upgrade if you plan to do any custom charting and you can download the XI R2 30-day eval from here:
[http://store.businessobjects.com/servlet/ControllerServlet?Action=DisplayPage&Locale=en_US&id=ProductDetailsPage&SiteID=bobjects&productID=40434000 | http://store.businessobjects.com/servlet/ControllerServlet?Action=DisplayPage&Locale=en_US&id=ProductDetailsPage&SiteID=bobjects&productID=40434000]

Similar Messages

  • Crystal Reports 2008 Pie Chart Data Labels

    Hi,
    I've been trying to figure out why I cannot get the option to put pie chart data labels in the center of each slice.  There's an option to place them there, but everytime I select it, the graph reverts to putting the data labels on the outside with leader lines.  I was able to do it once, for one pie chart, but have not been able to get it to work for any others.  I've even tried creating a pie with only two slices in case there's a slice size limit below which the data is placed outside.  There doesn't seem to be any rhyme or reason why it worked once and now won't work again.
    Thanks,
    -Jim
    Edited by: jwmckay on Apr 23, 2010 7:19 PM

    Hi Jim,
    The issue could be faced because of the 'Auto-arrange' layout option enabled from Chart Expert within the report.                                                                               
    This option allows Crystal Reports to reset the chart layout to its original size and position  
    To uncheck the 'Auto-arrange option':                                                                               
    - First Go to Chart Expert-                                                                               
    - Click on the Options Tab                                                                               
    - Uncheck Auto - Arrange                                                                               
    - Click OK                                                                               
    I hope this helps,
    Selenia

  • Creating custom reports with Pie Chart

    Hello,
    I've got a little problem while I'm creating custom reports with SQL Chart.
    For example, I want to have a Pie Chart that represent the distribution of the version for a software, i wrote my query with no problem, the result is in good format.
    My Pie Chart is fine except there are no percentage displayed. The legend on the right is fine with correct count of different version, but no percentage on the pie chart.
    Any idea?
    Thanks in advance,
    Fab

    Hello,
    well, I think this is not possible to ask OEM to print the percentage over the chart.
    Anyway, I sugget you to rewrite your query to compute the % in the query itselft thus to have the pct displayed on the rigth.
    Let's say you want to display the database files' size with such a query: select file_name name,bytes val from dba_data_files;
    This is the way to display the % of each file size over the total (remark the above query has been embeded in the new one).
    select name,ratio_to_report(val) over() pct
    from ( select file_name name,bytes val from dba_data_files )
    order by val desc
    It is quite easy to adapt such a tip to your own query.
    Regards,
    Noel Talard

  • Automatic Fill colors for Report Builder pie charts and graphs are too repetitive and hard to differentiate

    I have pie charts or other graphs that show multiple results (7-20).  I set the "fill" colors to Automatic so that the results are dynamic (I don't want to specify a color for each result because I will then be limited that those results--I
    prefer it to be dynamic).
    I noticed that once you get above 4 or 5 results, no matter which palette is used, the "automatic" colors are so closely similar that it is hard to differentiate which color pertains to which result (group).  For example, you could have a
    reports that breaks the results into age groups like 1-18, 19-21, 22-25, 26-30, 31-41, 41-50, 51-65, 66-80, and 81+.  By the time you review the results, there's likely to be 3 pairs of colors (or more) that are so closely similar that you can't
    tell them apart (2 shades of yellow, 3 shades of blue, 2 shades of orange, or green, or teal, or purple or whatever).
    Is there a way to use Automatic for the color scheme (I don't care which color pertains to which category) but also specify to not use colors that seem to bleed together (so that someone viewing the report can actually tell the difference)?  Using SSRS
    2008 Report Builder, if it makes a difference.

    Hi JNehman,
    Reporting Services provides a list of predefined, built-in palettes that you can use to define a color set for series on your chart. All built-in palettes contain between 10 and 16 color values. You cannot extend the built-in palette to include more colors,
    so if you need more than 16 colors, you must define a custom palette.
    A custom palette let you add your own colors in the order you want them to appear on the chart. A custom palette is especially helpful if the number of series in your chart is unknown at design time. For more information, see
    Define Colors on a Chart Using a Palette (Report Builder and SSRS).
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • Drilling down to CLM report from pie chart developed with Xcelsius

    Hi All,
    We have a requirement about drilling down to CLM side report upon clicking on the piece of pie that is developed using Xcelsius.
    1)For Example, below is a pie chart(developed through xcelsius) showing the information about the agreements expiring in certain period. We have placed it on the user workbench.
    Upon clicking on any piece of a pie, it should navigate to the detailed report showing the details of the master agreements.(as below)
    Can anyone please help in achieving this through Xcelsius?
    2)Is it possible to include any URLs in the list view(in Xcelsius), so that we could open the master agreement from it?
    Thanks,
    Vennela

    Well I assume A1, B1 are same reports with filtering on A and B.
    If this is the case make one report and say the filter(A or B) is prompted and when you click in the chart it goes to the report filtered by A or B depends on where you click.

  • Create Pie Chart and Vertical bar chart using report builder 3.0 with sharepoint custom list

    Hi All,
    I have a client requirement to create reports which should show the graphical representation of SharePoint Custom List data. The reports are Month wise and YTD. Also i have to create dashboard.
    For creating reports, i have heard about Report Builder and SSRS. I have SQL server 2008r2 and installed report builder 3.0 but i am not aware of creating reports(KPI, Pie Chart, Vertical bar, etc.,) with sharepoint customlist.
    Can some one please help me on this.
    MercuryMan

    Here is some information about using the SharePoint List Data source with SSRS/Report Builder/BIDS:
    http://www.infotoad.com/blog/post/2012/10/11/using-a-sharepoint-list-connection-type-as-a-data-source-for-reporting-services.aspx
    http://technet.microsoft.com/en-us/library/ee633650.aspx
    http://www.codeproject.com/Articles/24469/SQL-Reporting-Services-data-from-SharePoint-lists
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Pie Chart legend text when drill down too larger

    Dear Gurus,
    I have this report with Pie chart:
    *)Table:
    Element Group
    Earnings 100
    Deductions 30
    When drill down (after click on Earnings/Deductions), it become detail like this:
    Element Group Classification Name
    Earning Regular
    Earning Irregular
    And the Pie chart legend show this: Earnings, Regular Earnings
    ->how to remove Earnings?I just want to show classification name as legend.
    I use OBIEE 11.1.1.3
    Any help will be appreciated
    Regards
    Joe
    Edited by: JoeSSI on Aug 10, 2012 12:33 AM
    Edited by: JoeSSI on Aug 10, 2012 12:35 AM
    Edited by: JoeSSI on Aug 10, 2012 3:24 AM

    Hi Joe,
    There was a bug associated with repeated legends in 11.1.1.3 version.Can you check the below document and see if the mentioned patch helps,
    Vertical Bar Charts In OBIEE 11g Display Repeated Labels In The Graph Legend [ID 1376185.1]
    Regards,
    Dpka

  • Reporting Services in 2005 Secondary Pie Chart?

       Hi,
             In 2008 and 20012, secondary pie charts with a percentage threshold from a main pie chart can be easily created. Is it possible to do in 2005?
    *CustomAttributes
    Thanks.

    Hi Robb,
    It seems that you are using Dundas Chart Control for SQL Server 2008 R2 Reporting Services not the Dundas Chart Control 2005 that Microsoft has purchased.
    Microsoft purchased the license to use Dundas Chart Control 2005 in Reporting Services 2008 and above. Therefore the supported upgrade is from Reporting Services 2005 Dundas Charts to SSRS 2008 (R2) and SSRS 2012 Charts.
    If you are using a particular component released by Dundas for SSRS 2008 R2, you won’t be able to upgrade Reporting Services 2008 R2 Reports with Dundas Charts to Reporting Services 2012 Charts.
    To confirm this, please check the details of this assembly “DundasRSChart.dll” located under the /Report Server/bin directory.
    If the Product Name is “Dundas Chart for Reporting Services 2008 R2”, it indicates that this is a new version of Dundas Chart for SSRS 2008 R2 (i.e. a third party control). If the Product Name is “Microsoft SQL Server”, it indicates that this is the version
    that Microsoft has purchased.
    In this condition, you have to migrate the DundasRSChart.dll to the SSRS 2012 instance and reference it as the custom assembly in the reports. Please make sure to rename the DLL file so that it won’t replace the native DundasRSChart.dll installed by SQL
    Server 2012.
    For more information about referencing custom assembly in a report, please see:
    Using Custom Assemblies with Reports
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • PIE chart report for planned, Actual and variants cost

    Hi Gurus,
    Is there any report provides information of Plan cost, Actual cost and Variants cost for sales order or production Plan in PIE CHART format or any other chart diagram.
    Regards,
    Ram Krishna

    Hello,
    Go to relevant S_ALR* report.
    For example execute
    S_ALR_87013611
    Settings ==> Options
    Office Integration => Microsoft Excel
    Remove Worksheet Protection
    ignore the warning message.
    Go to insert tab on the MS excel.
    Select the report data.
    Click on pie chart.
    You will be able to see the pie chart.
    Regards,
    Ravi

  • SSRS Report Builder 3.0 - Pie Chart

    Hi,
    I have Pie chart that displays Number of  items by Country,
    My data set is pulling the correct values.
    The 3D effect is true for the pie chart and the Series Labels are set to diplay out of the Slice.
    I used the collected style to be SingleSlice and not using percentages but just the values less than or = 5 to be collected to other countries slice.
    for labels format I am using a column value from the query where I Concatenate the Value and Name of the country as string as I am not showing the legend on the chart for more space
    All the values are showing up right except for one value for one slice which is added extra numbers at the beginning of the number part of the string.
    For Example , if for USA there are 320 items  it should should show up as USA - 320  as that is the value that the query bring and I double checked that. But that value dipslays USA - 12320 for some reason and this is happening only with one
    label.
    I might be missing somethign silly but if someone can save my time and help me it would be appreciated.
    Please let me know if you have any questions.
    Thanks,
    Chaitanya

    Hi Chaitanya,
    Sorry for the delay.
    I am unable to reproduce the issue in my test environment. The issue seems rather odd. Here, I suggest that you create a new report and design the Pie Chart from scratch, and then check the issue again.
    If the issue persists, please post the expression of the label data as well as the CustomAttributes settings of the target series of the Pie Chart. 
    Regards,
    Mike Yin
    TechNet Community Support

  • Crystal Reports Pie Chart showing Sum 100% in Legend.  How to remove?

    I have a Pie chart which displays correctly but in the Legend is displayed the values with the correct percentages AND  the Sum showing 100%.
    I need to either remove the Sum line or be able to change the text from the report since I have to produce the report in 4 languages and the Sum always shows up in the language of the server.
    the legend looks something like;
    value1  25%
    value2  25%
    value3  75%
    Sum     100%   <------  this line must go or be changed  (e.g. in Italian as Totale)
    Running a server for each language is not an option
    There are a variable number of values so I cannot overlay a rectangle on a fixed position.  (awfull solution)
    Is there any way I can simply turn off the Summ (not the whole legend which is needed)?
    any help would be greatly appreciated.
    I am using Crystal Reports 2008
    Best Regards
    Chris Ryder

    Well  Thank you everyone for your suggestions.
    The client is very specific about the look and feel so I cannot change to not using a legend.  However,  the discussions serves to confirm that it is NOT possible which is actually just as useful.
    In Conclusion
    To restate the problem  the client has a report which can be displayed in one of four languages by choice from the end user.  The report contains a pie chart which displays the various segment names and percentages as a legend.  At the bottom of this legend appears automaticaly the word Summ in the langauge of the the 'Server Locale' (in our case german Summe) and the 100% value.
    I wished to know if it was possible to either change the language of this word (without changing the server as I do not have access) or to remove it altogether.
    The answer is NO it is not possible to remove only this word or to change it in anyway.
    Our final workaround is;
    we hide the Legend on the graph and build it as a seperate entity next to the graph.  Not ideal as everything is then done twice and we have an indirect link between the segment colours and the legend colours which is not apparent directly in the report.  But at least the client has signed off on the report.
    once again thank you for taking the time to think about the problem.
    Chris Ryder

  • Interactive Reporting - Dragging a Pie Chart into a Report

    I have a report that contains about 5 charts at the end of all the tables containing data (the charts are in the report footer). I have created a new pie chart and want to drag it into the report footer as well. When I drag it in, it goes at the very beginning of the report footer. I have tried dragging it down and it seems to only want to stay on that very first page of the report footer. I am not able to move it onto a different page. How do I make this work? What I'd really like to do is add a new page in the middle of the charts and put this new chart on that new page ... but i couldn't figure out how to do that, so I was just going to drag the new chart to the very bottom of the other charts.
    Thanks.
    Terri T.

    Terri
    I had a case where I needed "extra" Report Footers. To do this I created bogus Report Group Columns in my results section with a constant value, same for all rows.
    I then used this as a Report Group in the Report Section. I turned off the Group Header and Turned On the Group Footer with a Page Break Before or After. If you have other Report Groups then you would need to make the Bogus Report Group Column before any of your business report groups.
    Wayne Van Sluys
    TopDown Consulting

  • Pie chart to a tabular report

    I have develop a pie chart for Category Sales. If i click on one of the pie (Category) it should open a tabular report where it shows the sale of products in that category. How can i implement this in OBIEE dashboard?

    Hi,
    For your senario you can use Master Detail event feture to implement your solutions.
    Master-detail linking of views allows you to establish a relationship between two or more views such that one view, called the master view, will drive data changes in one or more other views, called detail views.
    More detail refer below linke;
    http://gerardnico.com/wiki/dat/obiee/master_detail
    Mark Helpful/Correct as applicable.
    Regards,
    Kashi

  • 3D pie chart in a report

    Hi all,
    I need to add a 3D pie chart in a report, and I don´t find it in the Chart Wizard. Anyone knows if is it possible to do this?
    Thanks in advance.

    Hello,
    http://www.oracle.com/technology/products/reports/htdocs/faq/Graph_FAQ_with_style.html
    How do I apply 3-D (three-dimensional) effect to my graphs?
    For Pie graph type, add the following attributes to your Graph.xml:
    <Graph ... pieDepth="30" pieTilt="20" ... >
    Regards

  • Crystal reports pie chart

    Hi,
    I have a record with 2 fields: a date field called 'mydate' and a text field called 'yesno'.
    There are about 100 records in the database.
    I want to produce a pie chart that will only produce the amount of 'YES' values in the 'yesno' field and show these values on the pie chart by month.
    Im pretty new to crystal reports, so if you could give me a step-by-step, that would be great.
    Thanks.
    J.

    James,
    I don't quite understand. Is the detail amount correct, just displayed as percentages, or is the actual percentage being displayed.
    If the detail amount is being displayed as a percentage, under Chart Expert -> Options -> Number Format is where you can format the field.
    If it's the actual percentage being displayed, you're going to have to change the Show Value you're basing the chart on.
    I hope this helps.
    Mike

Maybe you are looking for