Reports, Dashboard and Data Import Documentation

Do you know where I can find documentation regarding Reports and Analytics, Dashboard and data import release 18?
Thanks

Click on Training and Support link and search for "*Release 18 Resources*".
or click on this link for the resources
http://download.oracle.com/docs/cd/E15799_01/homepage.htm

Similar Messages

  • Report, Form, and Data Component portlets go to error page

    I am able to add Report Form and Data Component portlets to my page, but when I click on the define button it takes me to my error page.
    Have I missed configuring something?

    hello friends,
    thanks for replly,
    i m using command noe after table node in main window, but i want display the data below the main window , it is diplaying  new page as required but only missing data below the main window.
    to be more clear i want to print all the window in first page then only go for next page , so is there any condition or parmeter in main window to go next page only agfter completion of first page.
    dont worry abt points.

  • Report performance and data quality

    Hi,
    Can someone help give explanations to following questions :
    1.) Does BW Report show how current is my data?
    2.) What are the reason why the performance of my BW Report is slow?
    3.) What are the reason why my BW Report is have missing data?
    4.) Why is my BW Report have incorrect data?
    5.) Why doesnu2019t my BW Report Data match SAP R/3 Data?
    Thanks,
    Milind
    Please do not raise generic questions across multiple forums
    Edited by: Arun Varadarajan on Apr 9, 2010 2:08 AM

    Milind,
    1.) Does BW Report show how current is my data?
    You should be able to see the data currency when you run in the web - which method are you using - BEx or Web...?
    2.) What are the reason why the performance of my BW Report is slow?
    It could be due to anything - please search the forums for the same on how to identify possible performance bottlenecks
    3.) What are the reason why my BW Report is have missing data?
    It depends - Missing data loads etc etc
    4.) Why is my BW Report have incorrect data?
    You should be knowing that...? I can just say that it has incorrect data because ...." The sun rises in the east...".!!! more akin to asking "Why did the chicken cross the road"
    5.) Why doesnu2019t my BW Report Data match SAP R/3 Data?
    You should ask SAP that question...
    Honestly I am not sure what the reason behind such generic questions are.... if you are looking for answers - then you need to be more specific - if these are more like Interview Questions asked to you - I guess you should be able to answer them or ask further questions to clarify the question further....

  • CJ20N - project structure and data import

    Hello dear SAP specialists,
    Does anybody ever created a ABAP program to import project structure and populate it with data?
    I'm trying to start with something or get a working program to import some projects with data.
    Actually the program should use BAPI_PROJECT_MAINTAIN to create WBS and GUI_UPLOAD to read a text (cvs) file (LSMW can not be used:)
    Sincerely,
    Me

    Hi,
    Exactly!
    See you have so many tables in that BAPI, now all the data you have in your flat file you have to map to these tables.
    Below is a code...similarly you'll have to do
    TYPE-POOLS: truxs.
    *                           T Y P E S
    TYPES: BEGIN OF t_master_data,
              MATERIAL                      Type  MATNR ,
              IND_SECTOR                    Type  MBRSH ,
              MATL_TYPE                     Type  MTART ,
              PLANT                         Type  WERKS ,
              STGE_LOC                      Type  LGORT_D ,
              MATL_DESC                     Type  MAKTX ,
              BASE_UOM                      Type  MEINS ,
              MATL_GROUP                    Type  MATKL ,
              DIVISION                      Type  SPART ,
              ITEM_CAT                      Type  MTPOS_MARA  ,
              GROSS_WT                      Type  BRGEW ,
              UNIT_OF_WT                    Type  GEWEI ,
              NET_WEIGHT                    Type  NTGEW ,
              VOLUME                        Type  VOLUM ,
              SIZE_DIM                      Type  GROES ,
              BASIC_MATL                    Type  WRKST ,
              DOCUMENT                      Type  DZEINR  ,
              DOC_VERS                      Type  DZEIVR  ,
              PO_UNIT                       Type  BSTME ,
              PUR_GROUP                     Type  EKGRP ,
              AUTO_P_ORD                    Type  KAUTB ,
              "BATCH_MGMT Type  XCHPF ,
              PUR_VALKEY                    Type  EKWSL ,
              "GR_PR_TIME Type  WEBAZ ,
              COMM_CODE                     Type  STAWN ,
              COUNTRYORI                    Type  HERKL ,
              MRP_TYPE                      Type  DISMM ,
              REORDER_PT                    Type  MINBE ,
              MRP_CTRLER                    Type  DISPO ,
              LOTSIZEKEY                    Type  DISLS ,
              MINLOTSIZE                    Type  BSTMI ,
              MAXLOTSIZE                    Type  BSTMA ,
              FIXED_LOT                     Type  BSTFE ,
              MAX_STOCK                     Type  MABST ,
              ROUND_VAL                     Type  BSTRF ,
              PROC_TYPE                     Type  BESKZ ,
              SPPROCTYPE                    Type  SOBSL ,
              ISS_ST_LOC                    Type  LGPRO ,
              SLOC_EXPRC                    Type  LGFSB ,
              PLND_DELRY                    Type  PLIFZ ,
              GR_PR_TIME                    Type  WEBAZ ,
              SM_KEY                        Type  FHORI ,
              SAFETY_STK                    Type  EISBE ,
              PLNG_PLANT                    Type  PRWRK ,
              AVAILCHECK                    Type  MTVFP ,
              DEP_REQ_ID                    Type  SBDKZ ,
              ISSUE_UNIT                    Type  AUSME ,
              STGE_BIN                      Type  LGPBE ,
              BATCH_MGMT                    Type  XCHPF ,
              STGEPERIOD                    Type  MAXLZ ,
              STGE_PD_UN                    Type  LZEIH ,
              MINREMLIFE                    Type  MHDRZ ,
              SHELF_LIFE                    Type  MHDHB ,
              PERIOD_IND_EXPIRATION_DATE    Type  DATTP ,
              ROUND_UP_RULE_EXPIRATION_DATE Type  RDMHD ,
              STOR_PCT                      Type  MHDLP ,
              QM_AUTHGRP                    Type  QMATAUTH  ,
              QM_PROCMNT                    Type  QMPUR ,
              CTRL_KEY                      Type  SSQSS ,
    *           Type  ART ,
    *           Type  AKTIV ,
              VAL_CAT                       Type  BWTTY_D ,
              VAL_CLASS                     Type  BKLAS ,
              PRICE_CTRL                    Type  VPRSV ,
    * NEW ADDITION
              STD_PRICE                     Type  STPRS,
              PRICE_UNIT                    Type  PEINH ,
              MOVING_PR                     Type  VERPR ,
              QTY_STRUCT                    Type  CK_EKALREL  ,
              ORIG_GROUP                    Type  HRKFT ,
              ORIG_MAT                      Type  HKMAT ,
              VARIANCE_KEY                  Type  AWSLS ,
              PROFIT_CTR                    Type  PRCTR ,
              LANGU                         Type SPRAS,
           END OF t_master_data.
    *                  I N T E R N A L   T A B L E S
    DATA:
    *     Internal table of type t_master_data
          ist_master_data TYPE TABLE OF t_master_data,
    *     Internal table of type BAPIMATHEAD
          ist_headdata    TYPE TABLE OF BAPIMATHEAD,
    *     Internal table of type BAPI_MAKT
          ist_mat_desc    TYPE TABLE OF BAPI_MAKT,
    *     Internal table of type BAPI_MAKT
          ist_uom         TYPE TABLE OF BAPI_MARM,
    *     Internal table of type BAPI_MAKTX
          ist_uom_x       TYPE TABLE OF BAPI_MARMX.
    *                   G L O B A L   V A R I A B L E S
    DATA:
          it_num     TYPE num10,
    *     Global variable of type truxs_t_text_data
          it_raw     TYPE truxs_t_text_data.
    *                       W O R K   A R E A S
    DATA:
    *     Work area of type t_master_data
          wa_master_data                TYPE t_master_data,
    *     Work area of type bapimathead
          wa_bapimathead                TYPE BAPIMATHEAD,
    *     Work area of type bapi_mara
          wa_client_data                TYPE BAPI_MARA,
    *     Work area of type bapi_marax
          wa_client_data_x              TYPE  BAPI_MARAX,
    *     Work area of type bapi_marc
          wa_plant_data                 TYPE BAPI_MARC,
    *     Work area of type bapi_marcx
          wa_plant_data_x               TYPE BAPI_MARCX,
    *     Work area of type bapi_mard
          wa_storage_location_data      TYPE BAPI_MARD,
    *     Work area of type bapi_mardx
          wa_storage_location_data_x    TYPE BAPI_MARDX,
    *     Work area of type bapi_mbew
          wa_valuation_data             TYPE BAPI_MBEW,
    *     Work area of type bapi_mbewx
          wa_valuation_data_x           TYPE BAPI_MBEWX,
    *     Work area of type bapi_mard
          wa_mat_desc                   TYPE BAPI_MAKT,
    *     Work area of type bapi_marm
          wa_uom                        TYPE BAPI_MARM,
    *     Work area of type bapi_marmx
          wa_uom_x                      TYPE BAPI_MARMX,
    *     Work area of type mbapi_mpgd
          wa_planning_data              TYPE BAPI_MPGD,
    *     Work area of type mbapi_mpgdx
          wa_planning_data_x            TYPE BAPI_MPGDX,
    *     Work area of type mbapi_mpgd
          wa_return                     TYPE BAPIRET2.
    *                          P A R A M E T E R S
    PARAMETERS:
    *     Parameter of type rlgrap-filename
          p_file TYPE  rlgrap-filename.
    *               A T   S E L E C T I O N   S C R E E N
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          field_name = 'P_FILE'
        IMPORTING
          file_name  = p_file.
    *                S T A R T - O F - S E L E C T I O N.
    START-OF-SELECTION.
    * To upload data from flat file
      CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
        EXPORTING
          i_line_header        = 'X'
          i_tab_raw_data       = it_raw       " WORK TABLE
          i_filename           = p_file
        TABLES
          i_tab_converted_data = ist_master_data[]  "ACTUAL DATA
        EXCEPTIONS
          conversion_failed    = 1
          OTHERS               = 2.
      IF sy-subrc = 0.
        LOOP AT ist_master_data INTO wa_master_data.
          it_num = wa_master_data-PROFIT_CTR.
          wa_master_data-PROFIT_CTR = it_num.
          MOVE-CORRESPONDING wa_master_data to wa_bapimathead.
          MOVE-CORRESPONDING wa_master_data to wa_client_data.
          wa_client_data_x-MATL_GROUP = 'X'.
          wa_client_data_x-BASE_UOM = 'X'.
          wa_client_data_x-PO_UNIT = 'X'.
          wa_client_data_x-DOCUMENT = 'X'.
          wa_client_data_x-SIZE_DIM = 'X'.
          wa_client_data_x-BASIC_MATL = 'X'.
          wa_client_data_x-PUR_VALKEY = 'X'.
          wa_client_data_x-NET_WEIGHT = 'X'.
          wa_client_data_x-UNIT_OF_WT = 'X'.
          wa_client_data_x-DIVISION = 'X'.
          wa_client_data_x-BATCH_MGMT = 'X'.
          wa_client_data_x-QM_PROCMNT = 'X'.
          wa_client_data_x-MINREMLIFE = 'X'.
          wa_client_data_x-SHELF_LIFE = 'X'.
          wa_client_data_x-STOR_PCT = 'X'.
          wa_client_data_x-ROUND_UP_RULE_EXPIRATION_DATE = 'X'.
          wa_client_data_x-PERIOD_IND_EXPIRATION_DATE = 'X'.
          wa_client_data_x-ITEM_CAT = 'X'.
          MOVE-CORRESPONDING wa_master_data to wa_plant_data.
          wa_plant_data_x-PLANT  = wa_master_data-plant.
          wa_plant_data_x-PUR_GROUP = 'X'.
          wa_plant_data_x-ISSUE_UNIT = 'X'.
          wa_plant_data_x-MRP_TYPE = 'X'.
          wa_plant_data_x-MRP_CTRLER = 'X'.
          wa_plant_data_x-PLND_DELRY = 'X'.
          wa_plant_data_x-GR_PR_TIME = 'X'.
          wa_plant_data_x-LOTSIZEKEY = 'X'.
          wa_plant_data_x-PROC_TYPE = 'X'.
          wa_plant_data_x-SPPROCTYPE = 'X'.
          wa_plant_data_x-SAFETY_STK = 'X'.
          wa_plant_data_x-MINLOTSIZE = 'X'.
          wa_plant_data_x-MAXLOTSIZE = 'X'.
          wa_plant_data_x-FIXED_LOT = 'X'.
          wa_plant_data_x-ROUND_VAL = 'X'.
          wa_plant_data_x-MAX_STOCK = 'X'.
          wa_plant_data_x-DEP_REQ_ID = 'X'.
          wa_plant_data_x-SM_KEY = 'X'.
          wa_plant_data_x-STGEPERIOD = 'X'.
          wa_plant_data_x-STGE_PD_UN = 'X'.
          wa_plant_data_x-CTRL_KEY = 'X'.
          wa_plant_data_x-BATCH_MGMT = 'X'.
          wa_plant_data_x-AVAILCHECK = 'X'.
          wa_plant_data_x-AUTO_P_ORD = 'X'.
          wa_plant_data_x-COMM_CODE = 'X'.
          wa_plant_data_x-COUNTRYORI = 'X'.
          wa_plant_data_x-PROFIT_CTR = 'X'.
          wa_plant_data_x-ISS_ST_LOC = 'X'.
          wa_plant_data_x-VARIANCE_KEY = 'X'.
          wa_plant_data_x-SLOC_EXPRC = 'X'.
          wa_plant_data_x-QM_AUTHGRP = 'X'.
          MOVE-CORRESPONDING wa_master_data to wa_planning_data.
          wa_planning_data_x-PLANT = wa_master_data-plant.
          wa_planning_data_x-PLNG_PLANT = 'X'.
          MOVE-CORRESPONDING wa_master_data to wa_storage_location_data.
          wa_storage_location_data_X-PLANT = wa_master_data-plant.
          wa_storage_location_data_X-STGE_LOC = wa_master_data-stge_loc.
          wa_storage_location_data_X-STGE_BIN = 'X'.
          MOVE-CORRESPONDING wa_master_data to wa_valuation_data.
          wa_valuation_data-VAL_AREA = '1000'.
          wa_valuation_data_X-VAL_AREA = '1000'.
          wa_valuation_data_X-PRICE_CTRL = 'X'.
          wa_valuation_data_X-MOVING_PR  = 'X'.
          wa_valuation_data_X-PRICE_UNIT = 'X'.
          wa_valuation_data_X-STD_PRICE = 'X'.
          wa_valuation_data_X-VAL_CLASS = 'X'.
          wa_valuation_data_X-ORIG_GROUP = 'X'.
          wa_valuation_data_X-QTY_STRUCT = 'X'.
          wa_valuation_data_X-ORIG_MAT = 'X'.
          MOVE-CORRESPONDING wa_master_data to wa_mat_desc.
          APPEND wa_mat_desc to ist_mat_desc.
          IF wa_master_data-PRICE_CTRL = 'S' AND wa_master_data-STD_PRICE IS INITIAL.
            WRITE:/ 'Standard Price not maintained for material ',wa_master_data-MATERIAL.
          ELSE.
            CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
              EXPORTING
                HEADDATA             = wa_bapimathead
                CLIENTDATA           = wa_client_data
                CLIENTDATAX          = wa_client_data_x
                PLANTDATA            = wa_plant_data
                PLANTDATAX           = wa_plant_data_X
                PLANNINGDATA         = wa_planning_data
                PLANNINGDATAX        = wa_planning_data_x
                STORAGELOCATIONDATA  = wa_storage_location_data
                STORAGELOCATIONDATAX = wa_storage_location_data_x
                VALUATIONDATA        = wa_valuation_data
                VALUATIONDATAX       = wa_valuation_data_x
              IMPORTING
                RETURN               = wa_return
              TABLES
                MATERIALDESCRIPTION  = ist_mat_desc.
            Write:/ wa_return-message.
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
            Clear: wa_bapimathead
             ,wa_client_data
             ,wa_client_data_x
             ,wa_plant_data
            ,wa_plant_data_X
            ,wa_planning_data
             ,wa_planning_data_x
            ,wa_storage_location_data
             ,wa_storage_location_data_x
             ,wa_valuation_data
           ,wa_valuation_data_x.
          ENDIF.
          REFRESH ist_mat_desc.
        ENDLOOP.
      ELSE.
        Write:/ text-001.
      ENDIF.
    In the above code note how i have taken the same names for the fields in internal table as they are in the BAPI so that the mapping of data becomes easier, since i use MOVE CORRESPONDING.
    Regards,
    Shraddha
    Edited by: shraddha85 on Jan 31, 2011 9:49 AM

  • Import xcelsius sheet in dashboard and also keep my current sheet in place

    Dear Gurus:
    Is it possible to import xcelsius sheet in dashboard and also keep my current sheets in place because what is happening now is when I import xcelsius sheet it is replacing it with my current sheets whereas I don't want to replace the sheets, I want to add the sheets.
    I have a dashboard containing A,B,C,D,E,F sheets but there is another sheet G, which is in another dashboard, to avoid the repeatation of work I want to add G sheet along with A,B,C,D,E,F. I first export the sheet from dashboard and then importing this in another dashboard but when I import it A,B,C,D,E,F sheets lost.
    Is there a way that I add sheets while importing instead of replacing sheets while importing.
    Best Regards:
    Jawad K.sheikh

    hi
    1st export your A,B,C,D,E,F sheets
    and save it
    2nd open your A,B,C,D,E,F sheets excel file and also
    open your  G sheet excel
    right click on G excel sheet
    select MOVE OR COPY option
    select TO book where you want to copy the G sheet excel in your case select A,B,C,D,E,F sheets excel file
    after that save your excel file
    you will see all the sheet in one excel file
    after that import that file to dashboard

  • Data mismatch between dashboard and bw report

    Hi expert,
    Data is mismatchin between dashboard and BW report of .I am using SAP BW connection ,
    Dashboard screen shot
    BW Query output
    What is the issue can you please suggest...

    Hi Ganapathy,
    Please check the Prompt filter and Variables which you are passing to get the output in Dashboard and BW.
    It seems that some filters are missing in dashboard.
    Thanks
    Arvind Shukla

  • Sharing a date-prompted report between dashboards and ibots

    I have a report that has a single filter which is an "is prompted" date filter. I use it in conjunction with a calendar dashboard prompt when displaying the reports on a dashboard, and the dashboard prompt has a default value that references a repository variable called "yesterday", which is a datetime datatype. Well, I want to schedule this report to be executed and emailed by an ibot, and the ibot execution of the report should always be for "yesterday". Furthermore, whatever solution I come up with to accomplish this, it must be able to be reapplied to report after report after report by much less technical BI end users than myself. So I'm thinking that if I can create a saved filter, no matter how complex to create, that can be easily added to all such reports by the end users, that would seem to be ideal.
    i've tried to exhaustively go down a road of effecting a logical NVL() in an "Advanced SQL Filter" of the report using syntax along the lines of this, but I can't quite get it working. This is the closest I came to getting it to work:
    "Dates and Times"."Transaction Date" = @{VALUEOF("TransactionDate")}{VALUEOF("yesterday")}
    In the above example, "TransactionDate" is a presentation variable set by the dashboard prompt, and "Dates and Times"."Transaction Date" is a DATE datatype in the repository. Anyway, the above generates no error in either the dashboard with a prompt, nor in the "Results" tab of the Answers report-writing webpage (which I'd imagine simulates an iBot since the dashboard prompt is missing). However in both cases, "yesterday" is unconditionally used, and the "TransactionDate" presentation variable is ignored. In other words, everything works fine, except that when I select different values from the dashboard prompt, yesterday's data is still displayed. Argh!
    I've seen a lot of threads & blogs online that seem close to this problem, but no cigar in the long run. any and all suggestions are so welcome. I'm ready to tear my hair out... :)
    -Jim

    Okay, let's see if I understand this correctly. You want to use a report in an iBot and for this you want the Transaction Date to always be for "yesterday." You also want this report in a dashboard and you want the default to be "yesterday" but you want the users to be able to override this by selecting another date from the dashboard prompt. If yes, then proceed; else explain again.
    First, you need to create a repository variable (not a presentation variable!) in the rpd called "yesterday."
    In the dashboard prompt, for the Default Value, click on "Server Variable," click on the ellipsis and type "yesterday." This will default the dashboard prompt to "yesterday." Use the "drop down" type and save this to the presentation variable pvTransDate.
    You will need to build two reports, one for your iBot and one for your dashboard.
    For the iBot report, click on the Transaction Date column filter button and, after converting the filter to SQL, type this:
    "Dates and Times"."Transaction Date" = TIMESTAMPADD(SQL_TSI_DAY,-1, SYSTDATE).
    Schedule your iBot and you report will always be for "yesterday."
    For the dashboard report, make a copy of the report above. For this report, you will need to add the PV piece and delete the TIMESTAMPADD filter.
    Click on the Transaction Date column filter button, click on Add>Variable>Presentation, and type pvTransDate.
    When the report is viewed in the dashboard, the report will initially be filtered by the "yesterday" repository variable. When the user selects a value from the dashboard prompt, it will filter the report for that.

  • Company code restriction for dashboard and webi reports in BOBJ

    Hi Friends,
    We have a requirment where we need to restrict user on company code level in bobj.
    we have some dashborads and webi reports which need to be restricted at company code level, hence i have created a  role in BI and restricted the queries (bex queries) on company code level and same role and user i have imported in BOBJ.
    Now i can see the role and user in BOBJ and also i can login to BILAUNCH PAD with authentication as SAP  But unable to run the webi reports and dashboard hence i have added those reports to this user in bobj and now i can run the reports, but restriction is not working.
    In BI I am able to restrict user  but in bobj its  not restricting. kindly let me know if i am missing anything?
    We are having BO 4.0 SP6.
    Thanks
    Basis

    Hi Saurabh,
    In BI its wokring perfectly fine.
    I can run the query for specific company code and data is being populated as the respective compay code.
    I have also configure SSO between BI & BO using below link
    http://wiki.scn.sap.com/wiki/display/BOBJ/How+to+setup+SSO+against+SAP+BW+with+SAP+BO+BI4.0+Common+Semantic+Layer+%28UNX%29+or+BICS
    but when i am trying to create a olap connection in IDT with SSO connection test is getting failed with belwo error.
    com.businessobjects.mds.olap.OlapException: [Internal] SSO token or User password is empty.
    I checked STS is already there in APS .
    Thanks
    Basis

  • Add Comment to Xcelsius Dashboard and Webi Intelligence Report

    I created a Web Intelligence report based on that report using Live Office I am creating Dashboards in Xcelsius.
    The Business Request is that each day when the report is refreshed/scheduled at 2:00 am, next morning the BA looks at the report checks the data and add some comments.
    These comments should be availble/ displayed on the dashboard.
    Where should the BA add the comments and how can I bring it in report and dashboard
    I have tried few things nothng is working. any suggestions .
    THANK YOU

    I forgot to mention 1 important thing.
    If the user wants to run a dashboard or report (WITH HISTORICAL DATE) the comments should be displayed for that particular historical date.

  • Report locale, subtemplates and Data Model

    Hi,
    I have the following situation:
    We have 4 templates according to language, with french the default language:
    - FR: template.rtf
    - NL: template_nl.rtf
    - DE: template_de.rtf
    - EN: template_en.rtf
    The report locale is enough for BI Publisher to select the correct template, so that's OK.
    Some data from our database is also based on locale (eg street names and cities).
    Question 1: is it possible to use the current locale as parameter for the (sql) data model in some way (eg by using a specific parameter name)? For now we set the report locale to the correct language AND we send that same value through as a parameter. It would be cleaner to just set the report locale and be able to use that value in some way.
    Question 2: all of the above templates have a footer that's being reused, each also share the same data model, but the data is again based on the current locale.
    so: footer.rtf, footer_nl.rtf, footer_de.rtf and footer_en.rtf. Do I need to import all of these in their respective files or will localisation work (I doubt it)?
    Question 3: Is there a way to implicitly pass all parameters that were passed to the main template, also pass to the subtemplates? (eg LANG parameter is passed to template_nl.rtf, who can use it in his data model, is there a way to automatically make LANG available for footer_nl.rtf's data model or do I need to explicitly pass it as a parameter in the <?call-template: footer?>) - again if the report locale is available in some way to the data model, it would be easy.
    Thanks in advance

    Hello,
    Probably the easiest would be to use an OnDemand Process and some AJAX to pull your data into the extjs object.
    Here's an example of an OnDemand Process.
    http://apex.oracle.com/pls/otn/f?p=11933:11
    For data the easiest at the moment would be probably to use the Oracle XML functions to generate your data in XML and use that as your data feed.
    You might want to take a look the new Interactive Reports included in APEX 3.1, while extjs has alot of functions there is a bit of setup involved , while the Interactive Reports all you need is a SQL query http://www.oracle.com/technology/products/database/application_express/html/irrs.html
    You should search the forum for extjs as there has been quite a few successful integrations of APEX and extjs / YUI / jQuery etc.
    Regards,
    Carl
    blog : http://carlback.blogspot.com/
    apex examples : http://apex.oracle.com/pls/otn/f?p=11933:5

  • Performance issue and data getting interchanged in BO Webi report + SAP BW

    Hi,
    We are using SAP BW queries as the source for creating some BO reports.
    Environments :
    SAP - SAP BI 7.1
    BO - BO XI 3.1
    Issues :
    The reports were working fine in Dev and Q with less data. But when we point the universes to BW prod ( where we have much data), the reports are taking quite a long time to refresh and getting timed out. This query has some key figures which are having customer exits defined to show only one month data. And also BW accelerators are updated for the infocubes pertaining to this query. The BO report is giving data if we apply a filter in 'Query Panel' of Webi to show only current month dates. But then the issue is the values are getting interchanged for many objects. For ex: there are 2 objects- ABS version and Market region. The values are getting interchanged in the BO level.
    Please let us know if anything needs to be done in BO or BW to fix this issue if anyone has faced the same
    Also Please let us know if customer exits and accelerators works fine with BO
    Thanks
    Sivakami

    Hi,
    Thanks Roberto. We'll check the notes
    @Ingo,
    We are able to solve the performance issue by removing unused Key figures and dimensions from the query, but the column value interchange issue still persisits
    The build version is  - 12.3.0
    Query Stripping
    Where should we enable query stripping? When i went through some documentation it was written that it'll be enabled automatically from XI 3.1 Sp3. Can you please let us know if its so and what we need to do to enable it.
    The coulmn interchange is happening when we use dimensions in a certain order. When product type is used along with Market region. Market region shows values of Product type also in Webi report.
    Thanks & Regards,
    Sivakami

  • Export and import of data not table and data ????

    hii brothers and sister
    plz i have a a quetion about Export and import of data in oracle forms
    i have created 02 boutons one for export his trigger like this :
    eclare
    alrt number;
    v_directory varchar2(200) := 'c:\backup'; --- that if the C Drive not the Drive that the windows had installed in it.
    path varchar2(100):='back_up'
    ||to_char(sysdate,'dd_mm_yyyy-hh24_mi_ss');
    v_exp varchar2(200) := 'exp hamada/hamada2013@orcl file = '
    ||v_directory
    ||'\'
    ||path
    ||'.dmp';
    begin
    host(v_exp);
    alrt:=show_alert('MSG');
    end;
    and the bouton import is like this
    declare
    alrt number ;
    v_ixp varchar2(200) := 'imp userid=hamada/hamada2013@orcl file =c:\backup2\back.dmp full=yes';
    begin
    host(v_ixp);
    alrt:=show_alert('MSG');
    ref_list;
    end;
    i have just one table "phone"
    this code is correct he expot not only the data but also the creation of the table ....for exemple i do export and evry thing is good until now and i find the .dmp in the folder backup .. but when i deleted all data from my app and try to import this .dmp iit show me error it tell me thet the table phone is already created ....
    so plz help wanna just export the data of phone not the creation of table and data ???? or how can i import just the data from this .dmp ??

    Pl post OS and database versions.
    You will likely need to use the IGNORE flag - http://docs.oracle.com/cd/E11882_01/server.112/e22490/original_import.htm#sthref2201
    Imp utility (by default) will try and create the table first. Since the table already exists, imp reports an error. Use the IGNORE flag in your imp command to not report such errors.
    HTH
    Srini

  • Prepare templates of the existing reports and data objects.

    Hi,
    I'm trying to create templates of the reports and dataobjects created in oracle BAM. I've created some reports on a server and i need the same reports with same dataobjects on other servers. Is there any method to create the template of existing reports and data objects.
    Thanks,
    Rajdeep

    Hi
    You will have to export the Data Objects and Repots and import in the other environments using icommand.
    TO preserve the report id's you can use option preserveid
    and also supposeyou have 1 report which internally calls three other reports you can export the main report using dependencies option with icommand export use dependencies 1 and this will export all ur sub reports with main report..
    If u need more help on icommand check this doc
    http://www.oracle.com/technology/products/integration/bam/10.1.3/TechNotes/TechNote_BAM_Migration.pdf

  • How to view pre-built Dashboards and Reports of Oracle BI- Apps?

    Hi All,
    We have sucessfuly installed and configured the Oracle Apps, and also we configured the OracleBIAnalyticsApps.rpd and we are able to view the different subject areas.
    But we are facing problem in viewing any prebuilt dashboard or report.
    Is it possbile to view pre-built Dashboards and Reports of Oracle BI- Apps if we dont have any ERP applicaton as a source?
    As we dont have any ERP application we have loaded the data from the sample flat files to the Analytics warehouse.
    Any help would be highly appreciable.
    Regards,
    Manmohan Sharma

    Hi Damon,
    Thanks a lot.
    Now I understand that we have to have ERP data source if want to view the prebuild Dashborads and reports.
    Could you please provide the path to get Prebuilt Dashboard & reports ?
    Regards,
    Manmohan Sharma

  • Default Dashboard and Reports Home Page

    Hello All,
    1. I was wondering whether it is possible to change the default dashboard. Users currently have to select the appropriate dashboard and press the "Show" button to display a custom dashboard, I would like this to be the default if possible. Is this something that is possible, if not can customer care change these settings?
    2. Can you change the layout of the "Reports" screen. I would like to remove a few sections and reports that are not relevant. Is this something that is possible, if not can customer care change these settings?
    Thanks All...
    Innoveer

    Hi Guys,
    Amazing suggestions on manipulating dashboard. We want to use same concept, to use a custom web for our custom dashboard, but i I have following queries, please answer them for me.
    The data in dashboard gets filtered based on visiblity, so upon using the custom tab, how will the data visibility get affected. I feel that whatever data was supposed to be appeared on dashboard, same would be on the custom web tab. Data would be filtered based on Books. It would be nice to get confirmation from you guys. Also, please share if anyone had problems, or any other alternative suggestions.
    Our reports on the dashboard has hyperlink to "Contact" and "Account" entities, but when we place the dashboard in custom tab, navigation is possible but, the return hyperlink, doesnot navigate back to custom tab, it always redirects back to Homepage. Any suggestions to fix, please do post them.
    Thanks in Advance,
    Ashwini

Maybe you are looking for