Reports hide data lines in footer or header
Hi there,
not sure this is the right section. But I'll try anyhow.
We recently moved our reports from VS2005 to VS2010. The reports worked fine with the old redist package at our clients systems.
Since we migrated to the new development environment and the new redist 13 on the clients systems it seems as if page footers are swalloing up data.
Specificly a invoice document with several positions. if the number of invoice positions is to large to fit on one page, it prints to the bottom of the page, then the footer (which contains a blob field for footer pictures) and continues on the next page. the problem is that between the last row on the first page and the first row of the second page "lines" are missing. No changes have been made to the section expert settings what so ever since the migration.
Pointers into the direction of what might be the problem would be much appreciated. Thanks a lot in advance.
Markus
Thank you, we did test this ourslef extensively. Please not that the exact report with the exact code did work for years with CR for VS2005. the problem occured only since we migrated to CR13 for VS2010.
Linking the Report to the XML file did not get me any error messages or the map field dialogue. I am fairly convinced that this is not an issue of date field missmatch of any kind.
The problem is that for different data I put into the report, whatever is at the page break gets lost. A line out of a single text field as well as a whole Row conisting of several fileds of a single datarow or even a sum that is "generated" in the report.
I know that you need me to convice you that the problem is not caused by ourselfs. I'd do the same with our clients. Please take a look at attached XML File and the report sample I posted above.
here the link to the XML File
http://www.vepos.net/transfer/Sample/test.xml
Thank you for your time.
Markus
Similar Messages
-
Drill down report:hide multiple line from basic list and disp in secon list
hi experts ,
I was using checkbox in basic list and user is suppose to check or tick the checkbox .
So in the secondary list I want to display only those row which which are selected (or checked) in checkbox by the user .
I had tried to use HIDE techineque but it is storing (or hiding) only single (the last which was checked) row and not multiple rows , thats why only single row is display on to secondary list .
So how to hide (or store) multiple row in secondary list to solve this problem .
thanks and warm regards ,
mehar .
Edited by: MEHAR RALEKAR on Sep 24, 2008 5:37 PMHi,
You can include the Checkbox field in your Internal Table of type i and when the AT LINE-SELECTION is generated, check for those entries in your internal table with the Checkbox = 'X'. Move them into a Separate Internal Table and Display them in your Secondary List.
Hope it was Helpful.
Thanks and Regards,
Venkat Phani Prasad Konduri -
How to know whether a line in a list is header / footer / data line?
Dear All,
I have a list with header and footer lines. The lines that contains the actual data has a check box column. Due to the page size I'm using, all of my data will be shown in several pages with each page has header and footer lines.
What I'm doing is to read the check box in each line by using the following code:
DO.
READ LINE sy-index LINE VALUE INTO wa.
IF wa-mark IS NOT INITIAL.
The field 'mark' is the check box field.
The problem here is the header and footer lines are also read by the READ LINE sy-index LINE VALUE INTO wa statement while I want to treat header and footer lines specially.
Is there any way to mark a line as header / footer / data line?
Thanks in advance,
HarisThe header and footer should have some standard text. You can check for that.
Rob -
Converted Crystal Statement Report not showing line level data properly
Hi all,
We have an issue with a Cystral-converted PLD Customer Statement layout behaving strangely when printing for a customer with multiple pages.
When the statements are printed for a customer that has line level data which fills about an A4 page, this print absolutely fine; customer header data, line data etc. However, when we print for a customer that has more lines that can fit onto the one page, Crystal does the following:
Page 1 - Customer Header info and column headers (OK); Line level info until bottom of page (OK)
Page 2 - Customer Header info and column headers (MISSING); Line level info (ONLY ONE LINE APPEARS INDIVIDUALLY ON THIS PAGE BUT IS THE NEXT LINE CONTINUING FROM FROM THE PREVIOUS PAGE)
Page 3 - Customer Header info and column headers (OK); Line level info until bottom of page (OK - CONTINUING FROM THE INDIVIDUAL LINE FROM THE PREVIOUS PAGE)
Page 4 - Customer Header info and column headers (MISSING); Line level info (ONLY ONE LINE APPEARS INDIVIDUALLY ON THIS PAGE BUT IS THE NEXT LINE CONTINUING FROM FROM THE PREVIOUS PAGE)
etc...
So what basically seems to be happening is that every other page, Crystal just sticks in an individual line on it's own without any headers or anything OR other lines.
Help please! Quite likely a 'Section Expert' issue but we don't know what setting could be causing this.Sounds like the report is trying to print multiple pages with blank pages in between, is the normal report ie details fit onto an A4 page printing with a blank back page?
It will be page number resets and suppression of details on pagenumber = 2
YOu need to go to section expert and go through each section noting what conditions have been suppressed and if any formula boxes are red then open and see what they do.
Try turn conditions on and off and commenting out any formula conditiona and see what happens. By a process of elimination you should be able to work it out. However, you may have to stop the introduction of a blank page some how.
Ian -
How to display the the tablix column lines upto footer in rdlc report
How to display the the column lines upto footer in rdlc report.If data are less it should go upto bottom (footer) based on data.
For Example.I have 2 items.it should display 2 items and lines should continue upto footer.
| S.No| Name | Qty | Active | UNIT | Amount |
| 1 | A | 1 | 4 | 34 | 43 |
| 2 | B | 6 | 3 | 23 | 45 |
| | | | | |
|
| | | | | |
|
| | | | | |
|
| | | | | |
|
Footer
If I have 5 items.it should display 5 items and lines should continue upto footer.
| S.No| Name | Qty | Active | UNIT | Amount |
| 1 | A | 1 | 4 | 34 | 43 |
| 2 | B | 6 | 3 | 23 | 45 |
| 3 | C | | 4 | 47 | 56 |
| 4 | D | 3 | | 56 | 47 |
| 5 | E | 4 | 4 | 45 | 45 |
| | | | | |
|
| | | | | |
|
Footer
like that it should be adjust based on data length.
please help me how to do it in RDLC (asp.net and c#).....
Your help would be highly appreciated!
Thank you very much in advance!Hi M.S.GopalKrish,
According to your description, it seems that you want to make the tablix rows to fill page size? We can configure the text box height size to work around the issue.
Use this method, we need to calculate the average height size of the text box in the tablix. For more details, please see:
We can use
RowNumber() function to calculate the row number of the tablix.
Calculate the page height size of the tablix in Property windows.
Use the page height size divided by row number. We can get the average height size of the text box.
Hope this helps.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Reports show cgicmd.dat line on error
Hello,
We're using cgicmd.dat to hide DB username and password from users. The reports are run through a URL generated by a java client. If a user plays with the URL in the browser opened for the report and corrupt it in a way, Reports returns an error page containing the cgicmd.dat line corresponding to the key we're using. The same line containing DB username and password. Are there other ways to hide it from users? We do not want our users to authenticate separately when running reports.
Regards,
Muzaffer OzakcaIf you are using Reports 9i, you can use the Reports Data source Single Sign-On feature. DB username and password will be saved in OiD. See details at Chapter 7 of following doc:
http://otn.oracle.com/docs/products/reports/htdocs/doc_library/getstart/docs/a92102_01.pdf
For the problem you described, please work with Oracle support and have a bug filed.
Regards,
-Jeff -
Moving data into internal table without header line
Hello experts.
i have two internal tables . itab1 without headerline and itab2 with headerline. itab1 has 10 fields and itab2 has 2 fields.
BEGIN OF itab,
lifnr LIKE lfa1-lifnr,
ktokk LIKE lfa1-ktokk,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
pstlz LIKE lfa1-pstlz,
ort01 LIKE lfa1-ort01,
land1 LIKE lfa1-land1,
j_1ipanno LIKE j_1imovend,
end of itab.
DATA: itab1 TYPE STANDARD TABLE OF itab.
data: begin of itab2 occurs 0,
lifnr like j_1imovend-lifnr,
j_1ipanno like j_1imovend-j_1ipanno,
end of itab2.
now i want to move the data from itab2-j_1ipanno into itab1-j_1ipanno. so pls tell me how to do that. lifnr in both the tables are the same.
thanks for all the replies.Hi Shiva,
In with out header line,
You declare header line & body separately like
data: IT_MARA type standard table of MARA,
WA_MARA like line of IT_MARA.
Advantages:
1. Clear differentiation of header line over body
2. It is must in the ABAP Objects to have separate header line & body
3. Use ful in Nested Internal tables
Disadvantages:
1. Long syntax
for example: Loop at IT_MARA into WA_MARA.
In with header line
Data ITAB like MARA occurs 0 with header line.
Advantages:
1. Simple to use & declare over without header line.
Also,
With Header line:
codedata : itab like <dbtable> occurs 0 with header line.
Data: begin of itab occurs 0,
f1 type f1,
f2 type f2,
end of itab.[/code]
Without Header line.
codeTypes: begin of ty_tab,
f1 type f1,
f2 type f2,
end of ty_tab.
Data: itab type table of ty_tab, " Internal Table
wa type ty_tab. " Work Area[/code]
at any point of time use internal table without header line,it will be good performance as well OO ABAP will allow only internal table without header line.
Just use one simple example :
create one simple program with header line,use get run time field.
create one simple program without header line,use get run time field.
see the results ,here time will be micro seconds,so take 1000 records to internal table and do calculate the time.
While adding or retrieving records to / from internal table we have to keep the record temporarily.
The area where this record is kept is called as work area for the internal table. The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
e.g.
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
The header line is a field string with the same structure as a row of the body, but it can only hold a single row.
It is a buffer used to hold each record before it is added or each record as it is retrieved from the internal table. It is the default work area for the internal table.
kindly reward if found helpful.
cheers,
Hema. -
Hi Experts.
Material stock report (unrestricted, blocked, quality) with in date range.
getting information in T-CODE: MB52 but not in date range.
In mard table i did't find the date for unrestricted, blocked and quality.
from where can i get that information and how should i link all
Need a psudo code for it.
If any one worked on this kind of object plz send me the code.
Points assured..
Regards..
Ravi Reddy.Hi
Check this sample code hope it will helpfull for you
*DATA: ED TYPE F.
DATA : ED(15) TYPE N .
TABLES: EKKO, EKBE, EKPO, KONH , KONV ,LFA1 ,ESLL.
TYPE-POOLS: SLIS.
DATA: val1 like konh-vakey.
Data:GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
G_REPID LIKE SY-REPID,
G_GRID_TITLE TYPE LVC_TITLE.
Data:G_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
DATA:G_TABNAME TYPE SLIS_TABNAME VALUE 'ITAB1',
G_SAVE .
DATA:GS_VARIANT LIKE DISVARIANT.
DATA:LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA:GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
G_SAVE = 'A'.
DATA: BEGIN OF ITAB OCCURS 10,
EBELN LIKE EKKO-EBELN,
* LIFNR like p_vendor,
LIFNR LIKE EKKO-LIFNR,
NAME1 LIKE LFA1-NAME1,
NAME2 LIKE LFA1-NAME2,
* EBELP LIKE EKBE-EBELP,
BELNR LIKE EKBE-BELNR,
VGABE LIKE EKBE-VGABE,
GJAHR LIKE EKBE-GJAHR,
KNUMV LIKE EKKO-KNUMV,
EKORG LIKE EKKO-EKORG,
BEDAT LIKE EKKO-BEDAT,
* VAKEY LIKE KONH-VAKEY,
END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 10,
NAME1 LIKE LFA1-NAME1,
NAME2 LIKE LFA1-NAME2,
EBELN LIKE EKPO-EBELN,
LIFNR LIKE EKKO-LIFNR,
EBELP LIKE EKPO-EBELP,
* EBELP LIKE EKBE-EBELP,
KNUMH LIKE KONH-KNUMH,
BELNR LIKE EKBE-BELNR,
MATNR LIKE EKPO-MATNR,
TXZ01 LIKE EKPO-TXZ01,
PS_PSP_PNR LIKE EKKN-PS_PSP_PNR,
EXTROW LIKE ESLL-EXTROW,
SRVPOS LIKE ESLL-SRVPOS,
KTEXT1 LIKE ESLL-KTEXT1,
KOSTL LIKE EKKN-KOSTL,
NETPR LIKE EKPO-NETPR,
NETWR LIKE EKPO-NETWR,
ED1 TYPE p decimals 2,
KBETR2 LIKE KONV-KBETR,
KBETR1 LIKE KONV-KBETR,
KBETR LIKE KONV-KBETR,
* KBETR3 LIKE KONV-KBETR,
KWERT LIKE KONV-KWERT, " THIS IS FOR FREIGHT
KWERT1 LIKE KONV-KWERT, " THIS IS FOR PBXX OR PB00
KWERT2 LIKE KONV-KWERT, " THIS FOR OTHER CONDITION
MENGE LIKE EKPO-MENGE,
* TOTAL(15) type .
TOTAL TYPE p decimals 2,
VAKEY LIKE KONH-VAKEY,
WERKS LIKE EKPO-WERKS,
MWSKZ LIKE EKPO-MWSKZ,
PACKNO LIKE EKPO-PACKNO,
KNUMV LIKE KONV-KNUMV,
SUB_PACKNO LIKE ESLL-SUB_PACKNO,
GJAHR LIKE RSEG-GJAHR,
END OF ITAB1.
DATA: BEGIN OF ITAB2 OCCURS 10,
EBELN LIKE EKKN-EBELN,
EBELP LIKE EKKN-EBELP,
PS_PSP_PNR LIKE EKKN-PS_PSP_PNR,
KOSTL LIKE EKKN-KOSTL,
END OF ITAB2.
data: begin of itab3 occurs 10,
KNUMH LIKE KONH-KNUMH,
KSCHL LIKE KONH-KSCHL,
end of itab3.
data: begin of itab4 occurs 10,
KBETR LIKE KONP-KBETR,
end of itab4.
data: begin of itab5 occurs 10,
KPOSN LIKE KONV-KPOSN,
KNUMV LIKE KONV-KNUMV,
KSCHL LIKE KONV-KSCHL,
KBETR LIKE KONV-KBETR,
KWERT LIKE KONV-KWERT, " THIS IS FOR FREIGHT
* KAWRT LIKE KONV-KAWRT,
end of itab5.
DATA: BEGIN OF ITAB6 OCCURS 10,
* PACKNO LIKE EKPO-PACKNO,
SUB_PACKNO LIKE ESLL-SUB_PACKNO,
END OF ITAB6.
DATA: BEGIN OF ITAB7 OCCURS 10,
BELNR LIKE RSEG-BELNR,
GJAHR LIKE RSEG-GJAHR,
END OF ITAB7.
DATA: BEGIN OF ITAB8 OCCURS 10,
SUB_PACKNO LIKE ESLL-SUB_PACKNO,
SRVPOS LIKE ESLL-SRVPOS,
EXTROW LIKE ESLL-EXTROW,
KTEXT1 LIKE ESLL-KTEXT1,
END OF ITAB8.
*selection-screen
*SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
*SELECTION-SCREEN SKIP 2.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT 25(23) text-002.
**SELECT-OPTIONS: s_lifnr FOR ekko-lifnr.
*PARAMETERS:p_lifnr LIKE ekko-lifnr obligatory.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
PERFORM get_data.
* PERFORM field_catalog.
* PERFORM display_data.
END-OF-SELECTION.
**& Form display_data
** text
*FORM display_data.
*data: new(15) TYPE N.
* CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
* EXPORTING
* i_callback_program = sy-repid
* it_fieldcat = int_cat[]
* TABLES
* t_outtab = int_out
* EXCEPTIONS
* program_error = 1
* OTHERS = 2.
*ENDFORM. "display_data
PERFORM GET_DATA.
PERFORM CALL_ALV_GRID.
FORM CALL_ALV_GRID.
PERFORM FIELDCAT_INIT USING GT_FIELDCAT[].
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_repid
I_CALLBACK_USER_COMMAND = G_USER_COMMAND
I_GRID_TITLE = G_GRID_TITLE
IT_FIELDCAT = GT_FIELDCAT[]
I_DEFAULT = 'X'
I_SAVE = G_SAVE
IS_VARIANT = Gs_VARIANT
TABLES
T_OUTTAB = ITAB1.
ENDFORM.
FORM FIELDCAT_INIT
USING RT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = G_TABNAME.
LS_FIELDCAT-seltext_l = 'Vendo No'.
LS_FIELDCAT-FIELDNAME = 'LIFNR'.
LS_FIELDCAT-REF_FIELDNAME = 'LIFNR'.
LS_FIELDCAT-REF_TABNAME = 'EKKO'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = G_TABNAME.
LS_FIELDCAT-SELTEXT_L = 'Vendor Name'.
LS_FIELDCAT-FIELDNAME = 'NAME1'.
LS_FIELDCAT-REF_FIELDNAME = 'NAME1'.
LS_FIELDCAT-REF_TABNAME = 'LFA1'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
* CLEAR LS_FIELDCAT.
* LS_FIELDCAT-TABNAME = G_TABNAME.
* LS_FIELDCAT-FIELDNAME = 'NAME2'.
* LS_FIELDCAT-REF_FIELDNAME = 'NAME2'.
* LS_FIELDCAT-REF_TABNAME = 'LFA1'.
* APPEND LS_FIELDCAT TO RT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = G_TABNAME.
LS_FIELDCAT-seltext_l = 'Purchase Document No'.
LS_FIELDCAT-FIELDNAME = 'EBELN'.
LS_FIELDCAT-REF_FIELDNAME = 'EBELN'.
LS_FIELDCAT-REF_TABNAME = 'EKKO'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
* CLEAR LS_FIELDCAT.
* LS_FIELDCAT-TABNAME = G_TABNAME.
* LS_FIELDCAT-FIELDNAME = 'VGABE'.
* LS_FIELDCAT-REF_FIELDNAME = 'VGABE'.
* LS_FIELDCAT-REF_TABNAME = 'EKBE'.
* APPEND LS_FIELDCAT TO RT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = G_TABNAME.
LS_FIELDCAT-SELTEXT_L = 'Item No'.
LS_FIELDCAT-FIELDNAME = 'EBELP'.
LS_FIELDCAT-REF_FIELDNAME = 'EBELP'.
LS_FIELDCAT-REF_TABNAME = 'EKPO'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
* CLEAR LS_FIELDCAT.
* LS_FIELDCAT-TABNAME = G_TABNAME.
* LS_FIELDCAT-FIELDNAME = 'BELNR'.
* LS_FIELDCAT-REF_FIELDNAME = 'BELNR'.
* LS_FIELDCAT-REF_TABNAME = 'EKBE'.
* APPEND LS_FIELDCAT TO RT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = G_TABNAME.
LS_FIELDCAT-SELTEXT_L = 'Document Con'.
LS_FIELDCAT-FIELDNAME = 'KNUMH'.
LS_FIELDCAT-REF_FIELDNAME = 'KNUMH'.
LS_FIELDCAT-REF_TABNAME = 'KONH'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
* CLEAR LS_FIELDCAT.
* LS_FIELDCAT-TABNAME = G_TABNAME.
* LS_FIELDCAT-SELTEXT_L = 'Service/Material No'.
* LS_FIELDCAT-FIELDNAME = 'MATNR'.
* LS_FIELDCAT-REF_FIELDNAME = 'MATNR'.
* LS_FIELDCAT-REF_TABNAME = 'EKPO'.
* APPEND LS_FIELDCAT TO RT_FIELDCAT.
* CLEAR LS_FIELDCAT.
* LS_FIELDCAT-TABNAME = G_TABNAME.
* LS_FIELDCAT-SELTEXT_L = 'Service / Material description' .
* LS_FIELDCAT-FIELDNAME = 'TXZ01'.
* LS_FIELDCAT-REF_FIELDNAME = 'TXZ01'.
* LS_FIELDCAT-REF_TABNAME = 'EKPO'.
* APPEND LS_FIELDCAT TO RT_FIELDCAT.
* CLEAR LS_FIELDCAT.
* LS_FIELDCAT-TABNAME = G_TABNAME.
* LS_FIELDCAT-SELTEXT_L = 'WBS Element' .
* LS_FIELDCAT-FIELDNAME = 'PS_PSP_PNR'.
* LS_FIELDCAT-REF_FIELDNAME = 'PS_PSP_PNR'.
* LS_FIELDCAT-REF_TABNAME = 'EKKN'.
* APPEND LS_FIELDCAT TO RT_FIELDCAT.
* CLEAR LS_FIELDCAT.
* LS_FIELDCAT-TABNAME = G_TABNAME.
* LS_FIELDCAT-SELTEXT_L = 'Serial Number' .
* LS_FIELDCAT-FIELDNAME = 'EXTROW'.
* LS_FIELDCAT-REF_FIELDNAME = 'PACKNO'.
* LS_FIELDCAT-REF_TABNAME = 'ESLL'.
* APPEND LS_FIELDCAT TO RT_FIELDCAT.
* CLEAR LS_FIELDCAT.
* LS_FIELDCAT-TABNAME = G_TABNAME.
* LS_FIELDCAT-SELTEXT_L = 'Service Number' .
* LS_FIELDCAT-FIELDNAME = 'SRVPOS'.
* LS_FIELDCAT-REF_FIELDNAME = 'SRVPOS'.
* LS_FIELDCAT-REF_TABNAME = 'ESLL'.
* APPEND LS_FIELDCAT TO RT_FIELDCAT.
* CLEAR LS_FIELDCAT.
* LS_FIELDCAT-TABNAME = G_TABNAME.
* LS_FIELDCAT-SELTEXT_L = 'Dscription' .
* LS_FIELDCAT-FIELDNAME = 'KTEXT1'.
* LS_FIELDCAT-REF_FIELDNAME = 'KTEXT1'.
* LS_FIELDCAT-REF_TABNAME = 'ESLL'.
* APPEND LS_FIELDCAT TO RT_FIELDCAT.
* CLEAR LS_FIELDCAT.
* LS_FIELDCAT-TABNAME = G_TABNAME.
* LS_FIELDCAT-SELTEXT_L = 'Cost Center'.
* LS_FIELDCAT-FIELDNAME = 'KOSTL'.
* LS_FIELDCAT-REF_FIELDNAME = 'KOSTL'.
* LS_FIELDCAT-REF_TABNAME = 'EKKN'.
* APPEND LS_FIELDCAT TO RT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = G_TABNAME.
* LS_FIELDCAT-FIELDNAME = 'NETWR'.
LS_FIELDCAT-FIELDNAME = 'NETPR'.
LS_FIELDCAT-reptext_ddic = 'Basic'.
* LS_FIELDCAT-SELTEXT_L = 'Basic'.
LS_FIELDCAT-REF_FIELDNAME = 'NETPR'.
LS_FIELDCAT-REF_TABNAME = 'EKPO'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = G_TABNAME.
LS_FIELDCAT-FIELDNAME = 'NETWR'.
* LS_FIELDCAT-FIELDNAME = 'NETPR'.
* LS_FIELDCAT-reptext_ddic = ''.
* LS_FIELDCAT-SELTEXT_L = 'Basic'.
LS_FIELDCAT-REF_FIELDNAME = 'NETWR'.
LS_FIELDCAT-REF_TABNAME = 'EKPO'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = G_TABNAME.
LS_FIELDCAT-SELTEXT_L = 'Excise'.
LS_FIELDCAT-FIELDNAME = 'ED1'.
LS_FIELDCAT-REF_FIELDNAME = 'ED1'.
* LS_FIELDCAT-REF_TABNAME = 'EKKN'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = G_TABNAME.
LS_FIELDCAT-SELTEXT_L = 'Insurance'.
LS_FIELDCAT-FIELDNAME = 'KBETR2'.
LS_FIELDCAT-REF_FIELDNAME = 'KBETR'.
LS_FIELDCAT-REF_TABNAME = 'KONV'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = G_TABNAME.
LS_FIELDCAT-SELTEXT_L = 'Frieght'.
LS_FIELDCAT-FIELDNAME = 'KWERT'.
LS_FIELDCAT-REF_FIELDNAME = 'KWERT'.
LS_FIELDCAT-REF_TABNAME = 'KONV'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
* CLEAR LS_FIELDCAT.
* LS_FIELDCAT-TABNAME = G_TABNAME.
* LS_FIELDCAT-SELTEXT_L = '' .
* LS_FIELDCAT-FIELDNAME = 'KBETR1'.
* LS_FIELDCAT-REF_FIELDNAME = 'KBETR'.
* LS_FIELDCAT-REF_TABNAME = 'KONV'.
* APPEND LS_FIELDCAT TO RT_FIELDCAT.
*CLEAR LS_FIELDCAT.
* LS_FIELDCAT-TABNAME = G_TABNAME.
* LS_FIELDCAT-SELTEXT_L = 'PBXX'.
* LS_FIELDCAT-FIELDNAME = 'KWERT1'.
* LS_FIELDCAT-REF_FIELDNAME = 'KWERT'.
* LS_FIELDCAT-REF_TABNAME = 'KONV'.
* APPEND LS_FIELDCAT TO RT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = G_TABNAME.
LS_FIELDCAT-SELTEXT_L = 'VAT/ST '.
LS_FIELDCAT-FIELDNAME = 'KBETR'.
LS_FIELDCAT-REF_FIELDNAME = "KBETR".
LS_FIELDCAT-REF_TABNAME = 'KONV'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = G_TABNAME.
LS_FIELDCAT-SELTEXT_L = 'OTHER '.
LS_FIELDCAT-FIELDNAME = 'KWERT2'.
LS_FIELDCAT-REF_FIELDNAME = "KWERT".
LS_FIELDCAT-REF_TABNAME = 'KONV'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = G_TABNAME.
LS_FIELDCAT-SELTEXT_L = 'TOTAL'.
LS_FIELDCAT-FIELDNAME = 'TOTAL'.
LS_FIELDCAT-REF_FIELDNAME = 'TOTAL'.
* LS_FIELDCAT-REF_TABNAME = 'EKKN'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
ENDFORM. " FIELDCAT_INIT
FORM GET_DATA.
SELECT A~EBELN A~LIFNR A~EKORG A~KNUMV B~VGABE B~GJAHR B~BELNR
L~NAME1 L~NAME2
FROM EKKO AS A
INNER JOIN EKBE AS B ON B~EBELN = A~EBELN
INNER JOIN LFA1 AS L ON L~LIFNR = A~LIFNR
INTO CORRESPONDING
FIELDS OF TABLE ITAB.
* WHERE B~VGABE = '2'.
SELECT EKPO~EBELN EKPO~EBELP EKPO~MATNR EKPO~TXZ01 EKPO~WERKS
EKPO~NETWR EKPO~MENGE EKPO~MWSKZ EKPO~NETPR EKPO~PACKNO
FROM EKPO
INTO CORRESPONDING FIELDS OF TABLE ITAB1
FOR ALL ENTRIES IN ITAB
WHERE EKPO~EBELN = ITAB-EBELN and
EKPO~BUKRS = 'company code'.
SELECT EKKN~EBELN EKKN~EBELP EKKN~KOSTL EKKN~PS_PSP_PNR
FROM EKKN
INTO CORRESPONDING FIELDS OF TABLE ITAB2
FOR ALL ENTRIES IN ITAB1
WHERE EKKN~EBELN = ITAB1-EBELN AND
EKKN~EBELP = ITAB1-EBELP.
SELECT KONV~KNUMV KONV~KSCHL KONV~KBETR KONV~KWERT KONV~KWERT
KONV~KPOSN
FROM KONV
INTO CORRESPONDING FIELDS OF TABLE ITAB5
WHERE KONV~KNUMV = ITAB1-KNUMV AND
KONV~KPOSN = ITAB1-EBELP.
* SELECT LFA1~NAME1 LFA1~NAME2 FROM LFA1
* INTO CORRESPONDING FIELDS OF TABLE ITAB1
* WHERE LFA1~LIFNR = ITAB-LIFNR.
* SELECT ESLL~SUB_PACKNO ESLL~SRVPOS
* ESLL~EXTROW ESLL~KTEXT1 FROM ESLL
* INTO CORRESPONDING FIELDS OF TABLE ITAB6
* FOR ALL ENTRIES IN ITAB1
* WHERE ESLL~PACKNO = ITAB1-PACKNO .
** SELECT ESLL~SUB_PACKNO FROM ESLL
** INTO CORRESPONDING FIELDS OF TABLE ITAB6
** FOR ALL ENTRIES IN ITAB1
** WHERE ESLL~PACKNO = ITAB1-PACKNO.
* SELECT ESLL~SUB_PACKNO ESLL~SRVPOS
* ESLL~EXTROW ESLL~KTEXT1 FROM ESLL
* INTO CORRESPONDING FIELDS OF TABLE ITAB8
* FOR ALL ENTRIES IN ITAB6
* WHERE ESLL~PACKNO = ITAB6-SUB_PACKNO .
* SELECT RSEG~BELNR RSEG~GJAHR FROM RSEG
* INTO CORRESPONDING FIELDS OF TABLE ITAB7
* FOR ALL ENTRIES IN ITAB
* WHERE RSEG~BELNR = ITAB-BELNR AND
* RSEG~GJAHR = ITAB-GJAHR.
*LOOP AT ITAB1.
LOOP AT ITAB.
READ TABLE ITAB1 WITH KEY EBELN = ITAB-EBELN.
* IF ITAB1-EBELN = ITAB-EBELN.
IF sy-subrc eq 0.
* ITAB1-EBELN = ITAB-EBELN.
ITAB1-LIFNR = ITAB-LIFNR.
* ITAB1-EBELP = ITAB-EBELP.
ITAB1-BELNR = ITAB-BELNR.
ITAB1-KNUMV = ITAB-KNUMV.
ITAB1-NAME1 = ITAB-NAME1.
ITAB-NAME2 = ITAB-NAME2.
ITAB1-GJAHR = ITAB-GJAHR.
modify itab1 index sy-tabix.
ENDIF.
ENDLOOP.
*LOOP AT ITAB2.
* READ TABLE ITAB1 WITH KEY EBELN = ITAB2-EBELN.
* IF sy-subrc eq 0.
* ITAB1-EBELN = ITAB2-EBELN.
* ITAB1-PS_PSP_PNR = ITAB2-PS_PSP_PNR.
* ITAB1-KOSTL = ITAB2-KOSTL.
* modify itab1 transporting ps_psp_pnr kostl
* where ebeln = Itab2-ebeln AND EBELP = ITAB2-EBELP.
* ENDIF.
*ENDLOOP.
LOOP AT ITAB1.
**ON CHANGE OF ITAB1-ebeln or itab1-ebelp.
* concatenate itab1-werks itab1-lifnr itab1-matnr
* into val1.
* MOVE VAL1 TO ITAB1-VAKEY.
* MODIFY ITAB1.
* SELECT KONH~KNUMH KONH~KSCHL FROM KONH
* INTO CORRESPONDING FIELDS OF TABLE ITAB3
* FOR ALL ENTRIES IN ITAB1
* WHERE KONH~VAKEY = ITAB1-VAKEY.
**endon.
** sort Itab3 by kschl descending.
** Select konp-kbetr from konp into itab4 where
** KONP~KNUMH = ITAB3-KNUMH AND KONP~KSCHL = ITAB3-KSCHL.
**ON CHANGE OF ITAB1-ebelp.
**LOOP AT ITAB3
** ON CHANGE OF ITAB1-ebelp.
* itab1-knumh = itab3-knumh.
** SELECT KONP~KBETR FROM KONP INTO CORRESPONDING FIELDS
** OF TABLE ITAB4
** FOR ALL ENTRIES IN ITAB3 WHERE
** KONP~KNUMH = ITAB3-KNUMH AND KONP~KSCHL = ITAB3-KSCHL .
** IF ITAB3-KSCHL = 'JMOP' .
** ED = ITAB4-KBETR / 1000 * ITAB1-NETWR .
** ENDIF.
** IF ITAB3-KSCHL = 'JEC1'.
** Itab1-ed1 = ITAB4-KBETR / 1000 * ED.
** ADD ED TO ITAB1-ED1.
** modify ITAB1 transporting ed1.
** ENDIF.
* IF ITAB3-KSCHL = 'JMOP' .
* ED = 16 / 100 * ITAB1-NETWR .
* ENDIF.
* IF ITAB3-KSCHL = 'JEC1'.
* Itab1-ed1 = 2 / 100 * ED.
* ADD ED TO ITAB1-ED1.
* modify ITAB1 transporting ed1.
* ENDIF.
** ENDLOOP.
**endon.
modify ITAB1.
*endon.
LOOP AT ITAB5.
IF ITAB5-KSCHL = 'NAVS' OR ITAB5-KSCHL = 'NAVM'.
ITAB1-KBETR = ITAB5-KBETR.
modify ITAB1 transporting KBETR
where KNUMV = ITAB1-KNUMV AND EBELP = ITAB1-EBELP .
ELSEIF ITAB5-KSCHL = 'FRA1' OR ITAB5-KSCHL = 'FRC1' OR
ITAB5-KSCHL = 'FRB1'.
ITAB1-KWERT = ITAB5-KWERT .
modify ITAB1 transporting KWERT
where KNUMV = ITAB1-KNUMV AND EBELP = ITAB1-EBELP
* IF ITAB5-KSCHL = 'FRA1'.
* ITAB1-KBETR1 = ITAB5-KBETR / 1000 * ITAB1-NETWR .
* modify ITAB1 transporting KBETR1
* where KNUMV = ITAB1-KNUMV AND EBELP = ITAB1-EBELP
* ELSEIF ITAB5-KSCHL = 'FRC1' .
* ITAB1-KBETR1 = ITAB5-KBETR * ITAB1-MENGE .
* modify ITAB1 transporting KBETR1
* where KNUMV = ITAB1-KNUMV AND EBELP = ITAB1-EBELP
* ELSEIF ITAB5-KSCHL = 'FRB1' .
* ITAB1-KBETR1 = ITAB5-KBETR .
* modify ITAB1 transporting KBETR1
* where KNUMV = ITAB1-KNUMV AND EBELP = ITAB1-EBELP
* ENDIF.
* **THIS CODE IS FOR iNSURANCE CONDITION
ELSEIF ITAB5-KSCHL = 'ZGIN' OR ITAB5-KSCHL = 'ZIN2'.
ITAB1-KBETR2 = ITAB5-KBETR.
modify ITAB1 transporting KBETR2
where KNUMV = ITAB1-KNUMV AND EBELP = ITAB1-EBELP
* **THIS CODE IS FOR PBXX OR PB00 CONDITION
* ELSEIF ITAB5-KSCHL = 'PBXX' OR ITAB5-KSCHL = 'PB00'.
* ITAB1-KWERT1 = ITAB5-KWERT1.
* modify ITAB1 transporting KWERT1
* where KNUMV = ITAB1-KNUMV AND EBELP = ITAB1-EBELP
** ELSEIF ITAB5-KSCHL = 'JOCM' OR ITAB5-KSCHL = 'RA00' OR
** ITAB5-KSCHL = 'RA01' OR ITAB5-KSCHL = 'RB00' OR
** ITAB5-KSCHL = 'RC00' OR
**THIS CODE IS FOR OTHER CONDITION
ELSEIF ITAB5-KSCHL = 'RL01' OR ITAB5-KSCHL = 'ZA00' OR
ITAB5-KSCHL = 'ZA01' OR ITAB5-KSCHL = 'ZAE1' OR
ITAB5-KSCHL = 'ZAED' OR
ITAB5-KSCHL = 'ZAFR' OR ITAB5-KSCHL = 'ZB00' OR
ITAB5-KSCHL = 'ZBCH' OR ITAB5-KSCHL = 'ZBED' OR
ITAB5-KSCHL = 'ZC00' OR
ITAB5-KSCHL = 'ZCEX' OR ITAB5-KSCHL = 'ZCIF' OR
ITAB5-KSCHL = 'ZHC1' OR ITAB5-KSCHL = 'ZHC2' OR
ITAB5-KSCHL = 'ZHCT' OR
ITAB5-KSCHL = 'ZHCV' OR ITAB5-KSCHL = 'ZJOC' OR
ITAB5-KSCHL = 'ZOTH' OR ITAB5-KSCHL = 'ZOTP' OR
ITAB5-KSCHL = 'ZOTT' OR
ITAB5-KSCHL = 'ZPK1' OR ITAB5-KSCHL = 'ZPK2' OR
ITAB5-KSCHL = 'ZPK3' OR ITAB5-KSCHL = 'ZPK4' OR
ITAB5-KSCHL = 'ZRPO' OR
ITAB5-KSCHL = 'ZSE1' OR ITAB5-KSCHL = 'ZSED' OR
ITAB5-KSCHL = 'ZSFR' OR ITAB5-KSCHL = 'ZSTX' OR
ITAB5-KSCHL = 'ZTPI' OR
ITAB5-KSCHL = 'ZTPV' OR ITAB5-KSCHL = 'ZTRD' OR
ITAB5-KSCHL = 'ZWCT'.
ITAB1-KWERT2 = ITAB5-KWERT.
modify ITAB1 transporting KWERT2
where KNUMV = ITAB1-KNUMV AND EBELP = ITAB1-EBELP
modify itab1.
ENDIF.
ENDLOOP .
ITAB1-TOTAL = ITAB1-NETWR + ITAB1-KWERT2 + ITAB1-KWERT + ITAB1-KBETR.
* ITAB1-TOTAL = ITAB1-NETWR + ITAB1-ED1 + ITAB1-KBETR2 +
* ITAB1-KBETR1 + ITAB1-KBETR + ITAB1-KWERT .
modify ITAB1 transporting TOTAL.
LOOP AT ITAB6.
ITAB1-SUB_PACKNO = ITAB6-SUB_PACKNO.
* modify ITAB1.
ENDLOOP.
LOOP AT ITAB7.
ITAB1-BELNR = ITAB7-BELNR.
ITAB1-GJAHR = ITAB7-GJAHR.
ENDLOOP.
LOOP AT ITAB8.
ITAB1-SUB_PACKNO = ITAB8-SUB_PACKNO.
ITAB1-SRVPOS = ITAB8-SRVPOS.
ITAB1-EXTROW = ITAB8-EXTROW.
ITAB1-KTEXT1 = ITAB8-KTEXT1.
modify ITAB1.
ENDLOOP.
* SELECT ESLL~PACKNO ESLL~SUB_PACKNO ESLL~SRVPOS ESLL~KTEXT1
* FROM ESLL
* INTO CORRESPONDING FIELDS OF TABLE ITAB6
* WHERE ESLL~PACKNO = ITAB1-PACKNO.
** delete adjacent duplicates from itab1 comparing EBELN .
modify ITAB1.
endloop.
sort Itab1 by EBELN Ascending.
SELECT KONV~KBETR FROM KONV
INTO ITAB1-KBETR
WHERE KONV~KSCHL = 'NAVS' OR KONV~KSCHL = 'NAVM'.
ENDSELECT.
ITAB1-KBETR = ITAB5-KBETR.
*ENDLOOP.
*ENDLOOP.
*ENDLOOP.
ENDFORM.
Reward all helpfull answers
Regards
Pavan -
SSRS 2008 - hide chart lines based on parameter selected
How to control visibility of chart lines based on Params selected by user?
By default, my report display last 3 years worth of data (including current) with Month on the x axis and Counts on the y axis. I have two Boolean parameters:
TwoYrs? T/F
ThreeYrs? T/F
if False is selected for TwoYr and ThreeYr parameters then I want to hide chart lines corresponding to last year and the year before.
What I've tried: Created 3 Series groups with filters. eg. YearSeries1 to return only current year data and applying an expression to display it if params TwoYrs and ThreeYrs = False. and so on for YearSeries2 to return current + last
years data if param TwoYrs is True and ThreeYrs = False. But I don't see where to add expression to control the display of the individual series groups. I am open to any way of doing this, but this seemed most logical.Hi Ok-Hee,
In your Source Query just need to filter the series data based on the Parameters.
I have written sample query below:-
select * from
select 1 monthnumber , 'Jan' MonthName, 2013 year,100 amount
union
select 1 monthnumber , 'Jan' MonthName, 2014 year ,200 amount
union
select 1 monthnumber , 'Jan' MonthName, 2015 year , 300 amount
union
select 2 monthnumber , 'Feb' MonthName, 2013 year, 300 amount
union
select 2 monthnumber , 'Feb' MonthName, 2014 year, 350 amount
union
select 2 monthnumber , 'Feb' MonthName, 2015 year,200 amount
union
select 3 monthnumber , 'Mar' MonthName, 2013 year, 380 amount
union
select 3 monthnumber , 'Mar' MonthName, 2014 year, 100 amount
union
select 3 monthnumber , 'Mar' MonthName, 2015 year, 500 amount
)t
where year in (
select distinct FilterYear from
select case when @TwoYrs=1 then year(getdate())-1 else year(getdate()) end FilterYear
union
select case when @TwoYrs=1 and @ThreeYrs =1 then year(getdate())-2 else year(getdate()) end FilterYear
union
select year(getdate()) FilterYear
) t
I have created one post in my blog , you can check the result.
https://msbitips.wordpress.com/2015/03/12/ssrs-2008-hide-chart-lines-based-on-parameter-selected/
Thanks
Prasad -
SQL Report Writing blank lines or Formfeeds
I have a SQL Report that prints the data out correctly. My problem is there are several formfeeds or blank lines written at the top of the spool file. The report prompts users for information, does several calls to the database to create headings, creates 3 temp tables. The temp tables are:
TEMP1 - gathers information that is summed in TEMP2
TEMP2 - stores data from temp1 that has been summed
TEMP3 - creates the report using data from TEMP2 and other tables
A command file calls the sql file. Inside of the command file is the call to the spool file. Overview of code:
set trimspool on When these are on I get formfeeds. When they
set trimout on are off, it prints blank lines.
set heading off
set echo off
set feedback off
set verify off
set newpage 1
set space 0
set pagesize 60
set linesize 160
clear columns
prompt user for information
create headings and titles by quering various tables
create and insert data into TEMP1
create and insert data into TEMP2
create, insert, and update data into TEMP3
BEGIN report with TTITLE
SELECT * from TEMP3
end of report.
When I run the report in sql without using the command file, I get the same results.
Any suggestions as to what is creating this or how to get rid of it?
Thanks for your help,
PennyYes I have a suggestion.
Please move your spool line to just before the SELECT statement.
[not_meaning_to_be_sarcastic__really]
I have another suggestion. Please move your spool line to just before the SELECT statement.
Maybe if I say it enough times - you might actually take and try the suggestion. I find it useful when I ask people questions, to listen to them.
[not_meaning_to_be_sarcastic__really]
I mean no offense - but I gave you that answer days ago and it doesn't seem like you have tried it yet. TTITLE will be fired off when the SELECT is called, there is no need to have the 'spool' before the TTITLE.
It will take you maybe - tops - 10 minutes to give it a try - what'do'ya say - give'her'a'spin?
-- all your junk that creates form feeds or line feeds
SPOOL file_name_to_spool_to
SELECT * from TEMP3;
SPOOL OFF
-- etc. -
Hi,
I need to hide data in a table..Only column headers required to display.. I tried by (display column headers only) in view..It is showing only column header in the view ..But when iam displaying the table in dashboard it displays data also..another approach i took is to hide data from column properties ...Custom css display:none.. it is working fine..But the thing is it will not display data in other views also.I need to hide data only in table view..any helps will be appreciated.. Thank youHi Aswin,
Try this....
Take columns twice and first set which is use in table view (use display:none)
and second set use in pivot table and exclude first set columns........
Cheers,
Aravind -
How to change the date format of footer from dd/mm/yyyy to Monday 09 August 2010 when we down load the report in pdf file
Hi,
Revenue is a sample column. You can pull any measure column used in the report.
And put this formula in a separate new column. And in the narrative view use this column number.For Ex- if the number of the column in the criteria is 15, then mention @15 in the narrative view.
NOTE-Rows to display in narrative view should be set to 1.
And in the formula-CEILING(CAST(COUNT("F1 Revenue"."1-01 Revenue (Sum All)") as DOUBLE)/ 25)
25 refers to the number of row count to display. You can define the number according to your requirement.
Regards,
MuRam -
To run a report from command line, when using jdbc-odbc bridge
Hi,
How to run a report from command line, when using jdbc-odbc bridge?
Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
Please specify, what is command line arguments for jdbc-odbc bridge driver?
Environment : Oracle 9i Report Builder on WinNT
Database : Sybase
Regards,
RamananHello Ramanan,
Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
JDBC PDS allows user to connect one or more same or different kind of databases.
While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
rwrun eg :
rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
Server eg :
http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
http :
Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
With Regards
Reports Team -
Can't delete previous unread messages in hub pinch view via select previous (hold date line)
Happily running OS 10.2.1.2141 on my Z10 (STL100-3). I was thrilled to see the hub's Pinch Selection Criteria option in 10.2.1 but did not have the occasion to try it. Then this weekend, my mailbox got flooded with email notices from our alert system and I was facing having to delete hundreds of emails the old tedious way, multi-select each email one at a time and hit the delete option. Well, that's when I tried to use the hub's new pinch selection option to "hide" my read messages. I then held the date line to select all the previous messages and hit the delete option which asked my if a really wanted to delete those messages. I confirmed by choice and poof! nothing happened. I tried several times to no avail, even trying with flagged messages. It looks like you can't delete messages while in Pinch Selection view if you select them via the Select previous (hold date line) method. It does work if you select/multi-select the messages manualy but what's the point then?....
So, unless i'm doing it wrong, this appears to be a bug.
Regards,
Francis.....fpaquin wrote:
that should be the point of the pinch selection criteria and you're select by sender.... let's see if anyone can reproduce the "bug" on their handsets or better yet, BlackBerry confirms it's a bug or poor design......
when I pinch and hold a date bar, I get the trash can... do you not?
fpaquin wrote:
Yup, that's the tedious way I've always used, ok for a few emails, unacceptable for hundreds of emails.....
Oh, yea for hundreds. Do you get hundreds each day you need to delete?
Once you get caught up on your deleting, then your daily upkeep should be a reasonable low effort.
Anyways, that's how it works.
If you feel it is an OS issue... what OS are you on?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Sales hierarchy . role based reports and Data access, Best practice and sol
Dear all,
Currently working on a solution for Sales. There a geography and sales position hierarchy.
e.g. (USA,EU,ASIA) --> EU head -->UK head -->Northern UK head -->London head -->East london--> Postal codes in east london.
so altogether 7 roles and 7 positions, all these users can see data at it's level and below.
Also the summary report/ Prompts/ subject area columns for each of these users must be at their corresponding level and just 1 level below.
e.g. EU head by default must see column EU and country UK, UK head will see report only for UK and Northern UK region and so on.
After lots of thinking i am planing to take approach of creating 6 sets of similar dashboard/ different prompts/ different global filters/ reports.
Data level access is not at all issue i am easily able to manage.
Request experts to guide is there is any other better approach to take for objects in catalog.?
many thanks in advance.
Regards,
YogenDear Srini,
Data level Security is not at all issue for me. Have already implement it and so far not a single bug in testing is caught.
It's about object level security and that too for 6 different types of user demanding different reports i.e. columns and detailed drill downs are different.
Again these 6 types of users can be read only users or power users (who can do ad hoc analysis) may be BICONSUMER and BIAUTHOR.
so need help regarding that...as we have to take decision soon.
thanks,
Yogen
Maybe you are looking for
-
how to implement multi-resource option in OIM for Active Directory 9.1.1.7 are there any advantages and disadvantages
-
IPhone 4S front glass screen broken :(
Iphone 4s front glass screen smashed. Will apple repair for free? if not how much will it cost?
-
Hi , I have a job with number of queries. I need that output of the query in an excel format to a location whenever that job runs. Help me out.
-
How to read a MIME Repository Object in ABAP ?
Hi all, How can I read a MIME Repository Object in ABAP code ? Thanks.
-
GarageBand window won't resize
Garage Band window won't resize...I can see the bottom but not the top..if I do anything to it, I lose the bottom completely and have to start from scratch.