Reports only shows Servers

I've just installed ZEN Inventory on a server in our test lab. The
server is running Netware 6.5. It's also running ZFD 7.1, ZFS 7.1 and
ZFH 7.1. I've configured everything correctly as far as I can see.
I have one PC (XP SP2) connected and I can see from the console that
the PC has been inventoried. In console 1 If I click on Tools,
Zenworks Inventory and select Reporting, choose Hardware or Software
Inventory, select any catagory, the Scope for the report is greyed out
and has Server chosen as default. Why Can I not choose workstations?
(Same for queries - only Server radio button checked - others greyed
out)
Thanks

Patrick,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Reports only showing up in local admin console?

Ok, so I am stuck. I have installed SCCM 2012 without issue and installed the Reporting Services point using the same system as the SRS server. Everyhting at first appeared to be great. Using the local console on the server all the reports show up and run
fine.
However, when I use a console on a remote workstation (same login as server) everything works fine except reports, the reports always show up as "No Items Found." I can use the same credentials and browse to the report server and run reports through IE all
day long, but nothing I have tried can get them to show up in the console on the remote workstation. This client has quite a few people who will need to access reports this way, has anyone else seen anything like this?
Thanks,
Karl Koehler, mcitp, mct
P.S. I teach the MOC SCCM 2012 classes, the reports frequently do not show in the local console and a reboot fixes it. So this one really has me stumped.

Thanks for the replies, to answer your questions:
There is nothing special about the dB or SRS setup, everything is set to the default.
The systems running the remote consoles are in the domain, and have tried it on systems with UAC turned off completely.
I am able to access the reports through the reporting website without issue, but I haven't added the certificate to the clients (they do not have an internal CA and so it's using the self-signed.)
Do we think the console only uses HTTPS? Because that could be the issue. I'll add the cert and see what happnes and post back.

Apex report only show 2000 rows

Hi Experts,
I am going to show about 4800 rows in a report and want to show them within a page. In Layout an Pagination, I set 6000 to both 'number of rows' and 'maximum row count' and set 'pagination scheme' to 'not pagination selected'. However, it still only show 2000 row in the page. Is there anything I missed?
Thanks,
Daniel

Daniel Wu wrote:
In Layout an Pagination, I set 6000 to both 'number of rows' and 'maximum row count' and set 'pagination scheme' to 'not pagination selected'. However, it still only show 2000 row in the page. Is there anything I missed?If 2000 was the previous setting then this is likely to be the common problem of pagination settings being cached for a session. Either log out, restart the brower, and log in again, or manually re-request the page from the browser address bar, adding 'RP' in the ClearCache position in the URL.
I am going to show about 4800 rows in a report and want to show them within a page. Are you really sure about this? That's a lot of data to throw at someone in one go, and will have adverse effects on performance, usability and accessibility.

Selection Screen on Web Report only show filter area varieables.

HI ,
I am using WAD 3.5 and web template uses the query developed in 3.5, This report has two selection variables one in filter area and one in Rows section.
We recently did the Ehp 1 upgrade and after that it automatically showing only variable selection for character in Filter area. To show all I have to hit "All".
For Query designer query I was able to change the property in RSRT but for Web report I am not able to change and it is still showing only one selection screen instead of Two .
Have you faced any such issue. Please can you share your thoghts on how to correct it.
Best Regards
Som

Hi,
if you are able to see both variables in rsrt we could say that the variable definition are ok ( option: ready for input in variable definition)
So open the web report on web application designer and in the web template Properties search for "Force Variable Screen display" option and check this option.
Hope it helps,
rp

Report only showing items from one group

Post Author: webdevguy
CA Forum: General
I have two tables in a Btrieve database: Customer and CustomerType. Customer contains a field called CustType that is mapped to the ID field of the CustomerType table. In my report, I have the results grouped by CustomerType.ID with the group name pulled from CustomerType.Description.This mostly works. However, only results from the last CustomerType in the database are displayed. There are a number of other customers who belong to other groups, but only those with the CustomerType "Residential" are shown. There is no formula or anything in the Select Expert that would cause this.Any ideas?(By the way, I'm a Crystal Reports newbie. Sorry if this is a stupid question.)

Post Author: webdevguy
CA Forum: General
Thank you! Changing the link to Left Outer Join caused the other records to display. However, the "Residential" customer type is the only one with grouped records. All other records are placed under a group with no name, even though those records have different CustType values. Also, there is nothing in the group footer, so I assume it isn't that.

Zenworks Inventory Scope only shows "servers"

When I go into ConsoleOne v1.3.6h, Tools, Zenworks Inventory, Reporting... the scope says "servers." I can't choose workstations. When I try to do a quick report, it also has "servers" chosen by default. Workstation and Both are greyed-out.
I can go into individual workstation and look at their inventory.

spsmith,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

TEM - Business Information Report - only showing 1 instructor instead of 2

Good afternoon folks
We have a number of Business Events, in TEM, which are held by 2 instructors per event. When we run the "Business Event Information" report in PSV3 for these events we only get 1 instructor displayed; however if we run the "Resource List per Business Event" report or the "Instructor Information" report then both instructors are displayed.
Can anybody advise what I need to do so that the Business Event information report matches the Resouce list and instructor information reports.
Many thanks
Dawn

Hi Suman
Thanks for your reply. When I am having both the parts of Query 1 & Query 2, the BEx Report is falling over when executed pointing to Condition.
The second Query will pick the Top 3 Reason Codes for a particular Customer and then the individual Document Count for these 3 Reason Codes is divided by the Overall Result (Document Count) to give the individual Result across each row as %.
Hope this is clear now. I tried Cell Definitions but didn't find it useful in this scenario, or I might be missing something. Can you please explain me in detail of how this can be done in 1 BEx Query using Cell Def?
Please let me know if this can be achieved in Single BEx Query.
Thanks,
Chandu

Report only saves 1st 100 or so records.

I am doing a standard device report and the report comes out fine.
However when I want to save it as excel, excel All or any other option csv etc, only the 1st 107 records are saved.
I can move from page to page on the screen and see 2000 record there, but saving the report does not give me all the records.
This is a standard report and we are not using the reporting server.
Any ideas ?

Markvh,
you don't say what version you're running, but check
http://download.novell.com/patch/finder for your version, there are
known issues with reporting only showing 100 records
Shaun Pond

On website. Crystal report only displays partial report..

Using vs2008 with all the updates and sp's/
ASP.net vb.net
I have crystal reports loading in a aspx page.
Problem is... In development, When I run a report I can see the full toolbar graphics. report displays correctly.
When the website is installed. Some of the reports only show a 2x3 inch area.
The website is installed on my development machine.
The same aspx page shows several reports.. some of the reports show up full page while others only render a small area.
When I try to print the report, it also shows very small pages...
Has anyone heard of this?

WOW!
I found the freaken answer..
Apparently when the report was created, a printer that was default was a label printer. So no matter what I did, it would always size itself on the web to that label size.
The solution to this problem is to right click on the form, select designer, printer settings and check "no printer"
After doing that and redistributing the reports, it work like a piece of cake on the web.
Have spent 6 months looking for this answer and finally found it on my own..
I am surprised no one else has had this problem. Maybe I am just dumb.

Only showing APP monitoring Reports in SCOM 2012 Reporting

Hi all,
Recently i upgrade the SCOM 2012 from 2007 R2 Managament Server only because in previous environment we have only one MS server and SQL server 2008 SP2.
Now i have 4 servers for SCOM 2012.
1) SCOM Managament server (which was upgraded)
2) SQL server 2008 SP2 (running 3 instances)
3) SCOM ACS server (New installation)
4) SCOM Reporting server (New installation)
I have using two accounts
1) SCOM.action 2) SCOM.sdk
When i install reporting, reporting Tab are showing in the SCOM
2012 console but only Application monitoring reports are showing in Reporting. I was deleted some MP’s and then import it but the report are not imported in reporting tab. I also check SSRS, it works fine. Both SSRS url’s works fine.
I don’t know whats the problem.. Please clarify me what’s the problem.????
Regards,
Kamran

Hi Muhammad,
I am also facing the exact issue as expalined above.
Even the application monitroing reports are not working. When i try to launch application monitoring reports from reportmanger , I get dataset error and see that apm.* views are missing.
Also tried deleting and importing the managementpacks, without any success. This issue is happening only in production environment.
It will be very helpful if you can let us know what Account permisisons need to be checked for. Thanks in advance.
Thanks

Interactive Report Downloads only showing Column Headings

I have an Interactive Report that is selecting more than 100 columns. I set the defulat to only show a few of the columns (the rest are dedaulted to not show). When I try the download option (pdf, rtf etc.) , it only shows the column headers (no data). The download works when you originally create the Report region with the SQL statement. It seems to break as soon as you do the 'Save Report' - 'As default Report Settings'. Anybody seen this before? It is a bug?

Hi,
You are almost right place. You need click icon before 100th column name, order to go screen where you can edit column attributes.
In that screen right top is buttons (Cancle, Apply, < and >)
Regards,
Jari
Edited by: jarola on Jul 21, 2011 5:43 PM
It might documentation guides you to right screen
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/app_comp.htm#sthref978
>
To access Column Attributes:
1. On the Workspace home page, click the Application Builder icon.
2. Select the application.
3. Select a page. The Page Definition appears.
4. Under Regions, click Interactive Report next to the name of the report region you want to edit.
The Interactive Report Attributes page appears with the Column Attributes section at the top of the page.
5. To access the Column Attributes page, click the Edit icon next to the appropriate column Alias.
>
Edited by: jarola on Jul 21, 2011 5:44 PM

Report from SQL Query -Excel format only show the first page

Hi,
I have some Reports from SQL Query. In the display options, I choose Excel as default format. The Excel documents only show the first page. If I choose HTML as default format, it shows every rows.
Please advise on how to have a complete Excel document as HTML format does.
Thanks a lot.
Lina Han

I beleive when you export Oracle reports to Excel it is the Data that is transferred along with Column Names.
You cannot export the variables defined on the report.
Hence you will not be able to export the Footer to excel. (Still looking into it will let you know if i find anything interesting)
Regards,
Bhushan Salgar

Reports region only shows 15 rows

I have a strange problem with a reports region. The region runs a simple SQL select against a table. My table has 18 rows but the report region only displays 15 rows.
I ran the SQL directly against the database and all 18 rows are returned, so it's not a problem with the query.
Under the Report Atrributes tab for the region, I checked the Layout and Pagination section. Number of rows was set to 15, which I thought explained my problem.
I deleted the value in number of rows. But the region still only shows 15 rows.
If I change the value in number of rows to 20, all 18 rows are shown. But again, if I delete the 20, only 15 are shown.
Is there some other setting somewhere which is defaulting the report to 15 rows?

That item is cleared as well. Very strange. Still can't see anything on the page that's causing it to only show 15 rows.
Edit -
Setting it to 999999 seems to cure the problem until I find a solution. Very strange, maybe it's a bug?
Message was edited by:
Antilles

Dynamic Parameter only showing 1000 records when Crystal report is run.

I have created a crystal report using ODBC access to a table that has 3000 records. I created a dynamic parameter to pull a list of all the Customer ID's in a customer table and the parameter will only show the 1st 1000 records. In addition I cannot type in the customer ID that I would like. Version of Crystal - Crystal 11.

Oh, darn. So sorry. Looks like I hyperlinked the wrong URL (You'd think I got that down by now...). Anyhow here is the correct link:
1218588 - How to increase the number of values in a dynamic parameter list in Crystal Reports?
And in case the link does not work, or I goofed again, here is a copy of the resolution:
Resolution
CAUTION
The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. For information on how to edit the registry key, view the 'Changing Keys and Values' online Help topic in the Registry Editor (Regedit.exe). It is strongly recommended that you make a backup copy of the registry files before you edit the registry.
To increase the maximum number of values available in a dynamic parameter list of values, set the registry key: MaxRowsetRecords, to a value greater than 1,000.
Open the Microsoft Registry Editor, and navigate to the path corresponding to the version of Crystal Reports used:
Crystal Reports XI:
- HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV
Crystal Reports XI R2:
- HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV
Crystal Reports 2008:
- HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\Crystal Reports\DatabaseOptions\LOV
Crystal Reports 2011:
- HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Crystal Reports\DatabaseOptions\LOV
Crystal Reports 2013:
- HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Crystal Reports\DatabaseOptions\LOV
Crystal Reports for Visual Studio 2010:
- HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Crystal Reports\DatabaseOptions\LOV
NOTES:
- Add the key: LOV, if it is not present.
- For 64 bit version of Microsoft Windows, the registry path will be slightly different, it will start with:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\...
But the rest of the registry path is the same.
Add the String value: MaxRowsetRecords
Set the value of: MaxRowsetRecords to the maximum number of values to display in the List of Values.
For example, a value of 2000 will return up to 2000 values in the lowest level of a dynamic cascading parameter.
IMPRTANT NOTES:
- The higher the number of values is, the longer it will take the see the dynamic parameter prompt screen. In brief, it impact the performance.
- The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
After making changes to the registry, close and reopen Crystal Reports, or restart the Crystal Reports services for the BusinessObjects platforms.
- Ludek

Report to show all purchase invoices in B1

Is it possible via a standard report in B1 to pull a list of all purchase invoices in the system (open and closed)??
Purchase analysis will only show open invoices as far as i know.

Hello Casserly David ,
Please try the following query:
SELECT SUM(T0.DocTotal), T0.DocDate, T0.DocNum,
T0.DocStatus FROM OPCH T0 GROUP BY T0.DocDate,
T0.DocNum, T0.DocStatus
If you want to generate total value of all purchase
invoices automatically, please hold Ctrl button
on keyboard and Click on the header of Document total
column. The total value will appear on the
bottom of report.
Regards,
Wilma Wang
SAP Business One Forums Team

Reports only shows Servers

Similar Messages

Maybe you are looking for