Reportviewer Control vertical scroll bars

Hi,
I am using report viewer control to display reportins in a web application. For some reason I am not able to get the vertical scroll bars to show up. As a result the lower portion of the report is getting hidden. This was working in VS 2005 but it breaks in VS 2008. I tried some combinations of Size to Report Content, Asynch Rendering etc., but have not found any combination that works. Can anybody please help?
Thank you

I can't repro this. If the report doesn't fit the control height, ReportViewer shows vertical scrollbars. In my case, ReportViewer is configured as follows:
Code Snippet
<div style="padding-top:10px">
<rsweb:ReportViewer ID="reportViewer" runat="server" Visible="True"
Width="100%" Height="100%"
ondrillthrough="reportViewer_Drillthrough" BorderStyle="Inset"
BorderColor="Silver" BorderWidth="1pt"
ExportContentDisposition="AlwaysInline" AsyncRendering="True">
</rsweb:ReportViewer>
</div>

Similar Messages

Remove vertical scroll bar from table control

hi,
i had used table control in my application. i want remove vertical scroll bar from table control.
At initial time in table control there is no vertical scroll bar. In my table control lines are dependent on internal table which i was used to fill it.
i was used these code for to set table control lines.
DESCRIBE TABLE IT_RISK_ZINRISEXC LINES EXC_LINE.
TC_RISK_EX-LINES = EXC_LINE .
Initially there is no data in internal table so there is no vertical scroll bar. After getting value i am filling internal table. and there is scroll bar in my table control. but i does not want that.
i was not selected RESIZING-VERTICAL OR -HORIZONTAL.

Hi,
From Scroll Bars in Table Control
You can remove the scroll bar in the table control by switching off horizontal and vertical scrolling in the properties of the table control. The properties can be accessed from the screen painter by double clicking on the table control. Regarding the page up and page down functions, I believe you add those buttons in the screen layout and code for them. You can use the standard function code for the page up and page down functions.
or
You can get rid of the vertical scroll bars by not setting table control lines. This way the user can only see the visible lines of the table control. As for the horizontal scrollbar, just make sure that your table control doesn't contain too many fields.
Regards,
Raj.

How to Enable to vertical scroll bar in a table control

Hi,
I have created a table control with a wizard and later did some modifications on it. Problem I have now is that the vertical scroll bar is disabled on this table control. The end user wants to enter as many rows as possible, however as the scroll bar is disabled, he is not able to add the rows at the end (of the visible table control area).
How do I enable the vertical scroll bar of the table control?
Please help.
Thanks,
Vishal.

Hello Vishal,
In PBO.
Create a Module and in the module increment the value of tbcl-lines.
ex:
Data : L type i.
IN PBO.
MODULE vertical_scroll_bar.
MODULE vertical_scroll_bar.
DESCRIBE TABLE itab lines L.
<table control name>-lines = L + 10.
ENDMODULE.
Hope this solves your issue.
Cheers,
Suvendu

Vertical scroll bar in table control with wizrads

Hi,
Im working on a table control with a customised table. I created a table control with wizards. But vertical scroll bar is not working. How can i invoke vertical scroll bar and can any one provide the code for the all the operations on a table control like save,find,find next,change....Thanks in advance.
Avinash

Hi Avinash
move the records number of your internal table into field LINES of tablecontrol. So you should change the code generated by wizard in PBO, for example create a new module:
PROCESS PBO
MODULE SET_DATA_TO_T_CTRL.
LOOP..
ENDLOOP.
MODULE SET_DATA_TO_T_CTRL.
DESCRIBE TABLE ITAB LINE SY-TABIX.
<TABLECONTROL>-LINES = SY-TABIX.
ENDMODULE.
Max

Vertical Scroll bar does not appear in table control

Hi ,
I have a table control with both vertical and horizontal scroll bars.
The data which comes is always more than 50 and the visible line size is 8.The vertical scroll bar
does not appear at times..but if i run the program again, it appears..
Sometimes it appears and sometimes no vertical scroll bar comes thought the data is more than the visible lines.
Any suggestions ? why is this happening?
Regards,
Sharadha

You have inserted data in the internal table and not "informed" the table control
In the PBO, use a statement like
DESCRIBE TABLE <itab> LINES <control>-lines.
Regards

Vertical Scroll bars in analysis - View all rows

Users want to see the whole report displayed in one page with only a vertical scroll bar. They do not want the up/down arrows. Is this possible in OBIEE?
Thanks.
Ad

To implement the solution, please do:
1. Change instanceconfig.xml file in <biee11g_install>\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1 as following
<Views>
<Pivot>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>

<DisableAutoPreview>false</DisableAutoPreview>
<MaxVisibleColumns>5000</MaxVisibleColumns>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Pivot>
<Table>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Table>
</Views>
3. Note the new elements added are the following to both <Pivot> and <Table>, the Pivot part controls Pivot view, and Table part controls Table View, my testing was done with Table View.
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
4. Restart Presentation Server from EM, then run your request, do excel export to verify.
Thanks...

Problem getting vertical scroll bar in tree

Hi,
I am adding nodes to a tree control dynamically. But somehow,
a vertical scroll bar doesn't appear during the process. I guess,
somehow, the tree is not able to detect the change in the height,
hence, is not giving the vertical scroll bar. However, after a node
has been populated with the sub-nodes, when I close that node and
re-open it, then the scroll bar appears. I really need to fix it as
soon as possible. Plz help!
Thanks in advance,
Cheree

Seems like Flex 4 is working fine:
This is the updated code working on Flex 4.6 using XMLCollection:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" applicationComplete="application1_applicationCompleteHandler(event)">
    <fx:Declarations>
        
    </fx:Declarations>
    <fx:Script>
        <![CDATA[
            import mx.collections.ArrayCollection;
            import mx.collections.XMLListCollection;
            import mx.controls.Tree;
            import mx.events.FlexEvent;
            import mx.events.TreeEvent;
            [Bindable]
            public var treeData: XMLListCollection=new XMLListCollection();
            private var hasRun: Boolean = false;
            //finalSrcList is the ArrayCollection that has value objects returned from data base by a remote object.
            public function populateTree(event:TreeEvent): void{
                if (hasRun == false){
                    hasRun = true;
                    var parentNode:XML=event.item as XML;
                    var temp:XML;
                    var i: int;
                    var finalSrcList: ArrayCollection = new ArrayCollection();
                    // Prepare source list
                    for (i=0; i<10; i++){
                        var item = new Object();
                        item.attribute1 = "attribute " + i.toString();
                        item.attribute2 = i.toString();
                        finalSrcList.addItem(item);
                    for(i=0;i<finalSrcList.length;i++){
                        temp= <node label={finalSrcList[i].attribute1} id={finalSrcList[i].attribute2} isBranch="true"/>;
                        event.currentTarget.dataDescriptor.addChildAt(parentNode,temp,0);
            protected function application1_applicationCompleteHandler(event:FlexEvent):void
                var rootItem: XML;
                rootItem = <root label="root" id="1000">
                    <node label="level1" id="2000" isBranch="true"/>
                    </root>;
                treeData.addItem(rootItem);
        ]]>
    </fx:Script>
    <mx:Panel width="600" height="250" paddingBottom="20" paddingLeft="20" paddingRight="20" paddingTop="20"
              verticalAlign="middle" horizontalAlign="center">
        <s:Label>
This is using XMLCollection
        </s:Label>
        <mx:Tree id="funcTree" height="100%" width="100%" dataProvider="{treeData}" labelField="@label" showRoot="false"
                 itemOpen="populateTree(event)" />
    </mx:Panel>
</s:Application>

Vertical scroll bar disappears on the timeline?

After I use the vertical scroll bar once it disappears and I am unable to scroll. If I click the film strip on and off, it comes back. Is there a way to always keep the scroll bar visable on the timeline?

That has got to be a bug. Go to the Motion menu and Provide Motion Feedback... !
Otherwise, you can scroll with your mouse. I use a mouse with a scroll wheel, but I think I remember the magic mouse has a scroll gesture(?).
You can make the layers smaller by mousing over one of the lines in the layers list to the left of the timeline. The cursor should change to a double-pointed arrow. Click and drag the layers smaller.
You can open the timeline window wider by mousing over the Timeline top border, and click drag to make it larger.
I use this feature so rarely that I had never noticed before. When the scroll bar does appear, it's not "fully formed" either -- just a grey bar -- no resize controls on the ends at all.

RH7 - Viewing WebHelp in IE9 creates two vertical scroll bars

An extra frameset appears to be in the main htm page (attached) that is generated by RoboHelp. Here’s the frameset:
<frameset cols="100%,*" frameborder=no border=0>
<frame src="whnjs.htm">
<frame src="whskin_blank.htm" noresize>
</frameset>
When viewing the help in a Telerik RadHtmlPlaceholder control in Internet Explorer 9, this frameset causes our help content to appear twice. The content is stacked on top of each other, and a vertical scroll bar is added.
Manually removing this frameset resolves the issue.
Has anyone else seen this issue, and if so, are there any RH options for resolving it?

While I was using RoboHelp 7, I worked around the frameset problem by deleting the following code from the main pag in my help system, as suggested in the forum:
<frameset cols="100%,*" frameborder=no border=0>
<frame src="whnjs.htm">
<frame src="whskin_blank.htm" noresize>
</frameset>
When I did so after generating help in RoboHelp 7, I found that the extra frameset disappeared from IE9. Later I upgraded to RoboHelp 9 for an automated solution to the extra frameset in IE9. But I find that the problem persists. On WebHelp pages with more than a single screenful of text, the double frameset appears, and the content for the page one is viewing is stacked on top of the Welcome page, much as described by TechComm2 at the beginning of this thread. In IE9, with content generated in RoboHelp 9, an extra frameset appears whether I delete the abovementioned code or leave it in.
My project is used as contextual help. Our developers have placed extra security on the project so that a user cannot view the help without first logging in to the application it describes. Because of this, I am asking our developers to help me look for a solution to extra framesets. But I did want to come back to this forum with an update and ask for additional comments from you-all as well.
Thank you.
Tom

Is there a way to hide the horizontal and vertical scroll bar?

Hi,
I have report with customized page height and width and I am displaying it in the windows forms.
When I am resizing the form wherein the crviewer is dock in, the horizontal and vertical scroll bars appears.
Is there a way for me to suppress the those scrollbars?
Thanks in advance.

Couple of ways I've been able to find info about. E.g.; there is not straight API off os the viewer (CRviewer.ScrollBar = False ).
1) Add Panel control onto the page and add report viewer control into a Panel. Set Scrollbar, width, height property of Panel control.
2) See http://www.dotnetspider.com/forum/266932-Remove-Scrollbar-from-Crystal-report-Viewer.aspx for another idea.
If either of the above works for you, please let us know as I have not tested this yet.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Windows vertical scroll bar stuck at the bottom

Hi,
can anybody help me solve the problem? thanks in advance.
my laptop is ThinkPad T400, part No. 2764CTO, bought in Nov, 2008. OS is vista, office 2007.
the problem is sometimes when I use word or IE, the vertical scroll bar just stuck at the bottom, I could not go back to the first page or pageup, first I thought I got virus, I scaned the whole computer with AVG (free version), there was no virus, but sometimes this could fix the problem, sometimes not. it is very annoying.
is this the computer hardware problem or other problem? how to fix it.
thanks
Eric

Hello Eric,
please go to start-->control panel-->mouse select tab ultranav.
The click touchpad and choose the navigation point on the left, virtual scrolling an uncheck automatic scrolling.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

When I open Firefox (after upgrade) it does not show right side vertical scroller bar. I have to take the mouse and physically expand the browser to get the scroller bar to show. (never had this problem in previoius versions of firefox)

Firefox 4.0 on Mac OS 10.6.7 When I open Firefox it does not show the right vertical scroller. I have to take my mouse to the lower right corner and drag it open slightly and the scoller appears It will stay active through other tabs now until I close or shut down firefox. Once I reopen the same thing again no vertical scroller bar.

Yes AT&T is my ISP. I use DSL. Currently I am not at my home address. I am currently on a cable modem on COX.com.
I am also receiving a warning message "WARNING: Parental control appears compromised!".

At times when dragging the vertical scroll bar my computer screen oscillates up and down for some time before going blank or not responding to any clicks requiring a forced system restart. What is wrong?

Hi,
Suddenly while working with Firefox if I happen to drag the vertical scroll bar, a very abnormal behavior occurs. My screen dances up and down for a short time before either going black or getting restored but with no clicks working. The only way to resume is to force a restart of the system.
Any help would be deeply appreciated.
Thanks and Regards
Deepak

That didn't work. On trying to install a new driver I got the error the graphics driver could not find compatible graphics hardware. Is there anything else that can be done to at least prevent the hanging of the computer even if it means less features from Firefox being available?

Question on vertical scroll bars in JScroll Pane

Hi,
I managed to display my chat program with a vertical scroll bars by using JScrollPane. Every time some on types a line, this is appended to whatever was previously in the JTextArea (the JScrollPane has a JTextArea in it). Even though this works fine, when the dimension of the JTextArea is full with text, one has to scroll down to see what was the last line of text that was typed.
Is there a way to make the verticall scroll area alwas scrolled down (I mean, scrolled to the bottom so I can see new incoming text without manually having to scroll it down?)
Thanks!
Cecilia.

You might try adding a properties listener to the JTextArea listening for a "resize/size" property change and when it does, force the scroll bar to go to max.

On every website, my right vertical scroll bar is missing and all of my Toolbar bookmarks unless I minimize the window, click "view" and "full page." How do i get it back to NORMAL?

When I hit "full page" the right vertical scroll bar re-appears, but my bookmark toolbars, my bing bar, and pretty much the entire top 2 inches of my screen disappears. When all of these things are showing, the right vertical scroll bar disappears, and the entire webpage shifts to the right, so I can't see most of the right side of the page. How do I fix this?

Welcome to Safari 6 with:
. . t . . a . . b . . s . .
That are the size of tractor-trailer trucks!
There is no known way to get them smaller except when you get a lot they will "shrink-to-fit".

Reportviewer Control vertical scroll bars

Similar Messages

Maybe you are looking for