Request:: grouping of connections

Hi folks!
I did some searches in the forum but i didn't find an answer.
I work for various customers and they usually have a lot of environments.
I would like to have the possibility to create folders in the Connection navigator in order to bring some structure to the connections.
Something like
Connections:
--- Customer A:
-------Development:
----------SID1
----------SID2
-------Test:
----------SID1
----------SID2
-------Production:
----------SID1
----------SID2
--- Customer B:
-------Production:
----------SID1
Of course if this feature already exists I would be very happy to learn how to use it.
cu
Andreas

Exactly what they are planning has not been discussed, but 1.1 is meant to be including a rework of the navigator. As this grouping of connections has been raised consistently while I have been on the forum, there will hopefully be something to cater for that.

Similar Messages

  • Warning  6226: Ignoring value requested for first connection attribute 'TempSize'

    Hi
    Was trying to load, here is what I see. Appreciate your help.
    con1: Command> load cache group g_sdata_awt commit every 1000 rows;
    5056: The cache operation fails: error_type=<TimesTen Error>, error_code=<3407>, error_message: [TimesTen]TT3407: Cannot allocate space to store ownership information for global cache groups because temporary data partition free space is below the minimum threshold of 3000000 bytes - from grid member DDGRID_DD_TTDB_1
    The command failed.
    con1: Command>
    [timesten@timesten101 info]$ ttisql -connstr "dsn=DD_TTDB;tempsize=4096";
    Copyright (c) 1996, 2013, Oracle and/or its affiliates. All rights reserved.
    Type ? or "help" for help, type "exit" to quit ttIsql.
    connect "dsn=DD_TTDB;tempsize=4096";
    Warning  6226: Ignoring value requested for first connection attribute 'TempSize' -- value currently in use: 32, requested value: 4096
    Connection successful: DSN=DD_TTDB;UID=timesten;DataStore=/home/timesten/TimesTen/ttdev/DD_TTDB;DatabaseCharacterSet=AL32UTF8;ConnectionCharacterSet=US7ASCII;DRIVER=/home/timesten/TimesTen/ttdev/lib/libtten.so;LogDir=/home/timesten/TimesTen/ttdev/logs/DD_TTDB;PermSize=8196;TempSize=4096;TypeMode=0;OracleNetServiceName=VIS1;
    (Default setting AutoCommit=1)
    Command>
    I tried :
    HOWTO : Understand Modifying TimesTen PermSize And TempSize First Connect Database Attributes (Doc ID 1081008.1)
    It did not help! Thanks a lot.
    Anil

    Hi Chris, Thanks a lot again! I guess I followed the steps.
    Sorry in a rush to get this done, not able to read all the docs.
    Still getting the error, can you please point to me where I am going wrong:
    Sorry for being childish pest here, tried it hard but couldnt get too far.
    [timesten@timesten101 ~]$ ttadmin -rampolicy manual DD_ttdb
    RAM Residence Policy            : manual
    Manually Loaded In RAM          : False
    Replication Agent Policy        : manual
    Replication Manually Started    : False
    Cache Agent Policy              : manual
    Cache Agent Manually Started    : False
    [timesten@timesten101 ~]$ ttdaemonadmin -stop;
    TimesTen Daemon stopped.
    [timesten@timesten101 ~]$ ttdaemonadmin -start;
    TimesTen Daemon startup OK.
    [timesten@timesten101 ~]$ ttstatus;
    TimesTen status report as of Mon Feb 10 08:47:28 2014
    Daemon pid 19519 port 53396 instance ttdev
    TimesTen server pid 19528 started on port 53397
    Data store /home/timesten/TimesTen/ttdev/DD_TTDB
    There are no connections to the data store
    RAM residence policy: Manual
    Data store is manually unloaded from RAM
    Replication policy  : Manual
    Cache Agent policy  : Manual
    PL/SQL enabled.
    Accessible by group ttadmin
    End of report
    [timesten@timesten101 ~]$
    [timesten@timesten101 ~]$ ttadmin -rampolicy inuse DD_ttdb
    RAM Residence Policy            : inUse
    Replication Agent Policy        : manual
    Replication Manually Started    : False
    Cache Agent Policy              : manual
    Cache Agent Manually Started    : False
    [timesten@timesten101 ~]$ ttstatus
    TimesTen status report as of Mon Feb 10 08:47:59 2014
    Daemon pid 19519 port 53396 instance ttdev
    TimesTen server pid 19528 started on port 53397
    Data store /home/timesten/TimesTen/ttdev/DD_TTDB
    There are no connections to the data store
    Replication policy  : Manual
    Cache Agent policy  : Manual
    PL/SQL enabled.
    Accessible by group ttadmin
    End of report
    [timesten@timesten101 ~]$ ttisql -connstr "dsn=DD_TTDB;uid=cacheadm;pwd=cacheadm;oraclepwd=cacheadm";
    Copyright (c) 1996, 2013, Oracle and/or its affiliates. All rights reserved.
    Type ? or "help" for help, type "exit" to quit ttIsql.
    connect "dsn=DD_TTDB;uid=cacheadm;pwd=cacheadm;oraclepwd=cacheadm";
    15019: Only the instance admin may alter the TempSize attribute
    The command failed.
    Done.
    [timesten@timesten101 ~]$

  • Use an existing request in transport connection

    Hello
    I want to add objects into an existing transport request with transport connection.
    How can i do?
    Can i create a new one from transport connection but not transport it automatically? only insert objects inside it.
    Thanks.

    Dear Fernando Ariel Gonzalez ,
    I think we can..
    Please go through the steps below,
    1. Go to rsa1 -> business content
    2. Choose 'grouping' as "in dataflow afterwards"
    3. choose 'collection mode' as "collect automatically"
    4. choose 'infoproviders by infoareas' - choose appropriate infoprovider and 'insert objects for collection'
    5. Select your query / queries
    6.choose 'create transport request for BEx' and select appropriate development class
    To Release a request....
    se09/se10, 'modifiable' is marked, and 'display', cursor on you request and click truck button (release),
    if request has 'child' request, need to release it first.
    To delete or remove request
    Goto SE03
    Requets/Tasks > Unlock Objects
    Give the Request num & Execute
    Now Delete the Request on SE09
    It is possible to rmove before transportataion from SE03. Well if you want to remove from after transportation it can happen in a case like this. While you delete the obect in dev, it should ask for a request and when that request is transported the object will get deleted in the target sys too.
    For more information....
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
    /message/1257362#1257362 [original link is broken]
    Re: How to collect & transport new cube & new update rules
    Re: Transport to BWQ issue?
    Re: Transport a query from BWQ to BWP
    Hope it helps you,Revert me back if you have any queries
    Regards
    Bala

  • FNDLOAD: How to remove a concurrent program from a request group

    Hi,
    I want to remove a concurrent program from a request group using FNDLOAD utility. Since impacted environment is Production (controlled environment) I do not want to remove concurrent program manually from the request group. Is there a way to use FNDLOAD utility for this purpose or some other means?
    Environment: Oracle EBS R12.1.1
    OS: Linux
    Thanks,
    Nitin

    Hi,
    Unfortunately this CP cannot be disabled as it has to be removed from certain RGs but not all. Also removing it through RG forms is always an option but production gatekeepers won't allow to do that. I would have done that in a min.
    If FNDLOAD is not an option then I guess only other option is pl/sql script.
    Best regards,
    Nitin

  • How can we assign more than one request group to a responsibility?

    Hi
    Can anyone tell me how we can assign more than one request group to a responsibility?
    Thanks
    SS

    Hi SS,
    Its not possible, rather you should create a combination of Requests/RequestSets and create a new Request Group.
    Regards,
    Kiran

  • TS2690 we could not complete your itunes store request. the network connection could not be established

    we could not complete your itunes store request. the network connection could not be established

    Hello ,
    you can try to sign out of your apple account then sign in again.

  • Plug-in Request Group field into the external authentication plug-in

    Hi all,
    I'd like to know if anyone has already tried to filter who can have the permission to call the external authentication plug-in setting it into Plug-in Request Group field.
    I've made some tests adding some users into groups OracleDASAdminGroup, OracleUserSecurityAdmins and groups that I've created under my DC settings. Unfortunatly, I've had no success.
    Is possible to do this?
    Thank you.
    Message was edited by:
    user571491

    Hi all,
    I'd like to know if anyone has already tried to filter who can have the permission to call the external authentication plug-in setting it into Plug-in Request Group field.
    I've made some tests adding some users into groups OracleDASAdminGroup, OracleUserSecurityAdmins and groups that I've created under my DC settings. Unfortunatly, I've had no success.
    Is possible to do this?
    Thank you.
    Message was edited by:
    user571491

  • My computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

    my computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

    Hi there croadstar,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    -Griff W. 

  • Error (2931) VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.

    Experts,
    kindly advice for this error when create vm from a templates, while i'm not having this issue when create the vm to another host from the same templates,
    firewall is disabled and no antivirus on the host.
    The network and the ping is very stable, and the WS-Management service is running on the host,
    Host  : windows server 2012 R2
    VMM : 2012 R2 3.2.7895.0
    VMM updated from RU2 to RU5
    Error (2931)
    VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.
    Unknown error (0x80338029)
    Recommended Action
    Ensure that the Windows Remote Management (WS-Management) service and the VMM agent are installed and running and that a firewall is not blocking HTTPS traffic.
    This can also happen due to DNS issues. Try and see if the server (ms-lab-01.eccsolutions.local) is reachable over the network and can be looked up in DNS. You can ping the virtualization server from VMM management server and make sure that the
    IP address returned matches the IP address locally obtained from the virtualization server.
    If the error still persists, restart the virtualization server, and then try the operation again.
    Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010.

    Ok  I will try another template,
    and the drop happen in the customization after deploying the VHDX file as my first image.
    I had this answer from partner forum. but i didn't try it yet
    Backup your VMM database and then check the
    tbl_VMM_Lock table in the
    VMM database to see if it has any locks listed, do this after stopping the System Center Virtual Machine Manager Service.
    If there are locks listed in the tbl_VMM_Lock
    table you can clear them by executing the prc_VMM_ReleaseAllLocks
    stored procedure.
    Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010, Server Virtualization.

  • How to use FNDLOAD to add program to request group?

    Is there a way to use FNDLOAD to add a program to System administrators > security > responsilibity > request.
    I have try to use the following command to downlod this information to load it to other place but no record saved in ldt file:
    FNDLOAD apps/apps1234 O Y DOWNLOAD $FND_TOP/patch/115/import/afcpreqg.lct PO_RESQUEST_GROUP_2.ldt REQUEST_GROUP REQUEST_GROUP_NAME="All Reports" APPLICATION_SHORT_NAME="XXPO"
    OR
    FNDLOAD apps/apps1234 O Y DOWNLOAD $FND_TOP/patch/115/import/afcpreqg.lct PO_RESQUEST_GROUP_3.ldt REQUEST_GROUP APPLICATION_SHORT_NAME="Purchasing" REQUEST_GROUP_NAME="All Reports" UNIT_NAME="XXPO_PUR_REQ"
    if i delete APPLICATION_SHORT_NAME="Purchasing" , it downloaded many seemingly not relevant data as follow:
    Downloading REQUEST_GROUP to the data file PO_RESQUEST_GROUP_3.ldt
    Downloaded REQUEST_GROUP All Reports CUN
    Downloaded REQUEST_GROUP All Reports IGS
    Downloaded REQUEST_GROUP All Reports PSB
    Downloaded REQUEST_GROUP All Reports CSE
    Downloaded REQUEST_GROUP All Reports AHL
    Downloaded REQUEST_GROUP All Reports ENI
    Downloaded REQUEST_GROUP All Reports OFA
    Downloaded REQUEST_GROUP All Reports XTR
    Downloaded REQUEST_GROUP All Reports SQLAP
    Downloaded REQUEST_GROUP All Reports PO
    Downloaded REQUEST_GROUP All Reports CHV
    Downloaded REQUEST_GROUP All Reports QA
    Downloaded REQUEST_GROUP All Reports CE
    Downloaded REQUEST_GROUP All Reports POA
    Downloaded REQUEST_GROUP All Reports MFG
    Downloaded REQUEST_GROUP All Reports CRP
    Downloaded REQUEST_GROUP All Reports WIP
    How can I confine "Application"? which is under the field "Group" and how can I download all application named "custom puchasing" next to "Name"?

    When migrating to another instance and want to add a concurrent program to a request group, I do it in two steps. Within a shell script, I call
    1 - FNDLOAD to load ldt file (concurrent program definition)
    2 - SQLPLUS to run an sql file that call FND API that install concurrent program into proper request group.
    ex # 1 :
    FNDLOAD $apps_user/$apps_pswd@$dbsid 0 Y UPLOAD $XDO_TOP/patch/115/import/xdotmpl.lct $XX_TOP/XX_PGM.ldt - WARNING=YES CUSTOM_MODE=FORCE >> $LOG_FILE 2>&1
    ex # 2 :
    sqlplus -s $apps_user/$apps_pswd@$dbsid @$XX_TOP/XX_PGM_REQ_GROUP.sql >> $LOG_FILE 2>&1
    XX_PGM_REQ_GROUP.sql content.
    IF NOT fnd_program.program_in_group('XX_PGM','Business Online','GL Concurrent Program Group','General Ledger' ) THEN
    fnd_program.add_to_group(program_short_name => 'XX_PGM',
    program_application => 'Business Online',
    request_group => 'GL Concurrent Program Group',
    group_application => 'General Ledger');
    COMMIT;
    END IF;
    Hope this might help.

  • How to restore the appearance of this message? "Requested an encrypted connection to a page [...] Probability of read data [...] [Optional] Always warn me before [...]" Is disabled by default and now I have it shut off permanently.

    Hello!
    I have a problem, because when the message appeared:
    (original)
    "Zabezpieczenia
    Zażądano połączenia szyfrowanego ze stroną, która zawiera elementy niezaszyfrowane.
    Prawdopodobieństwo odczytania przesyłanych danych przez osoby trzecie jest duże.
    [Opcja] Zawsze ostrzegaj przed nawiazaniem połączenia szyfrowanego ze stroną zawierającą elementy niezaszyfrowane."
    (in translation)
    "Security
    Requested an encrypted connection to a page that contains the elements unencrypted.
    Probability of read data transmitted by third parties is large.
    [Optional] Always warn me before you make an encrypted connection to the page containing the unencrypted parts."
    option "Always warn ..." is disabled by default and by chance it shut off permanently.
    How to restore the appearance of this message?
    Sincerely,
    Jadwiga Zabagło

    Hello!
    I have a problem, because when the message appeared:
    (original)
    "Zabezpieczenia
    Zażądano połączenia szyfrowanego ze stroną, która zawiera elementy niezaszyfrowane.
    Prawdopodobieństwo odczytania przesyłanych danych przez osoby trzecie jest duże.
    [Opcja] Zawsze ostrzegaj przed nawiazaniem połączenia szyfrowanego ze stroną zawierającą elementy niezaszyfrowane."
    (in translation)
    "Security
    Requested an encrypted connection to a page that contains the elements unencrypted.
    Probability of read data transmitted by third parties is large.
    [Optional] Always warn me before you make an encrypted connection to the page containing the unencrypted parts."
    option "Always warn ..." is disabled by default and by chance it shut off permanently.
    How to restore the appearance of this message?
    Sincerely,
    Jadwiga Zabagło

  • Report/Program added to a request group

    I just noticed in my environment that whenever i add a report or program to a request group i don't get to see it when i want to run/submit the report or program.
    What could be the problem?

    try use
    CREATE OR REPLACE PACKAGE fnd_program AS
    -- Procedure
    --   ADD_TO_GROUP
    -- Purpose
    --   Add a concurrent program to a request group.
    -- Arguments
    --   program_short_name  - Short name of the program. (e.g. FNDSCRMT)
    --   program_application - Application of the program. (e.g. 'FND')
    --   request_group       - Name of request group.
    --   group_application   - Application of the request group.
    PROCEDURE add_to_group(program_short_name            IN VARCHAR2,
                        program_application          IN VARCHAR2,
                        request_group                 IN VARCHAR2,
                     group_application             IN VARCHAR2);for example
    begin
    fnd_program.add_to_group(
            'XXSHORTNAME',
            'XXPROGAPPL',
            'All Reports',
            'SQLAP'
    end;

  • Finding the Request group of a report in APPS

    How do I find which request group an oracle report or a PL/SQL procedure is attached in Oracle APPS?

    Please try this
    SELECT FRG.REQUEST_GROUP_NAME, FE.EXECUTION_FILE_NAME, FE.EXECUTABLE_NAME
    FROM FND_REQUEST_GROUP_UNITS FRGU, FND_CONCURRENT_PROGRAMS FCP , FND_REQUEST_GROUPS FRG
                   , FND_EXECUTABLES FE
    WHERE FRGU.REQUEST_UNIT_ID = FCP.CONCURRENT_PROGRAM_ID
    AND FRGU.REQUEST_GROUP_ID = FRG.REQUEST_GROUP_ID
    AND FE.EXECUTABLE_ID = FCP.EXECUTABLE_ID
         AND FE.EXECUTION_FILE_NAME = <REPORT NAME>

  • Finding the Request group of a report

    How do I find which request group an oracle report or a PL/SQL procedure is attached?

    Hi
    Do use the below query to get the Request Group Name and Responsibility Name...
    input must be Report name
    SELECT
    A.RESPONSIBILITY_KEY ResponsibilityName,
    B.REQUEST_GROUP_CODE RequestGroupName
    FROM FND_RESPONSIBILITY A,
    FND_REQUEST_GROUPS B,
    FND_REQUEST_GROUP_UNITS C,
    FND_CONCURRENT_PROGRAMS_VL D
    WHERE A.REQUEST_GROUP_ID = B.REQUEST_GROUP_ID
    AND C.REQUEST_GROUP_ID = B.REQUEST_GROUP_ID
    AND C.REQUEST_UNIT_ID = D.CONCURRENT_PROGRAM_ID
    AND D.USER_CONCURRENT_PROGRAM_NAME LIKE <<Report name >>
    Regards
    Yram

  • Concurrent request got deleted from a request group

    Hi,
    Somehow a concurrent request got deleted from a request group. Is there any way so that we can determine the person from whose login it happened.
    Thanks in advance

    Hi,
    You can try using PSA if that request it's still there.
    Otherwise, you will need to regenerate that request in source system (by filling setup tables with parameters) and update BW with a full load.
    Hope this helps.
    Regards,
    Diego

Maybe you are looking for