"Request not updated" message misleading

It seems that if I use a DTP using FULL extraction mode, the request in the PSA shows the status "Request not updated in any data target".
This is not strictly true because it has been updated, only via FULL instead of DELTA. I can appreciate that there is no need to track this, but the message seems misleading.
I would suggest the message should be changed to a more accurate "Request not updated via Delta into any data target". Does that make sense, or am I misunderstanding the meaning of this status message?

Hi kevin,
with the new functionality the data from other source system through infopackage is stored till PSA only, regardless of whether it is FULL or DELTA....
After that you create DTP for data transfer within BW i.e PSA to data target...
Also this note from help.sap...
With a data transfer process, you can transfer data either in full extraction mode or in delta mode. In full mode, the entire dataset of the source is transferred to the target; in delta mode, only the data that was posted to the source since the last data transfer is transferred.
Reward if it helps,
ajay

Similar Messages

Load status in PSA "Request not updated to any data target using delta"

Hi,
I need to delete the Unwanted request from PSA with status u201CRequest not updated to any data target using deltau201D
There are lot of requests are there in PSA but some of them loaded with status
u201CRequest updated in Data targetu201D u2013 I donu2019t want delete this requests.
Others u201CRequest not updated to any data target using deltau201D -- need to delete
We are deleting manually every week end.
Is there any program or tables which can delete automatically unwanted u201C Request not updated to any data target using deltau201D requests from PSA.
Thanks for your help in Advance,
Raj.

Hi Rajesh,
You may create a simple process chain, where you could include the variant "Delete PSA Request".At the bottom of this variant maintenace screen you would find options exactly matching your requirements.It's a very simple option and should not take you more than 5 minutes.
Best Regards,
Bansi.

Master data loads Request not updated to any data target using delta

When checking the PSA the request updated ICON has red triangle and the mouse over says
"Request not updated to any data target using delta".
I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1. DTP has not been implemented yet. The system was just upgraded in July. I am unable to schedule deletes from the PSA for successful loads. However, I think the data is updating to the info objects. My Info package has the selection to PSA then in the InfoObject package by package.
How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
Edited by: Joe Mallorey on Jan 27, 2009 5:46 PM

Hi shikha,
The load has not failed but I am unable to delete the load from the PSA.
If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
Thanks for the reply.
Regards,
JoeM

PSA showing Request not updated to any data target using delta

Hi BWers,
I am very new to SAP and have a IDES installed with BW. I am trying to do a simple data load from a flat file. I have managed to create a InfoPackage, but when I schedule it and then go into the data source -> manage and look at the screen :
Requests for PSA /BIC/Bxxxx
I see the Request updated having a Red triangle with an exclamation mark in it and it says
"Request not updated to any data target using delta"
Wondering if someone can help me resolve this so that I can further create a DTP and load the data into the InfoObject.
Thanks for all your help.
Manish

Reg : Delta Load : Production Data
Current Scenario :
we have existing system pulling data from 0CO_OM_WBS_6 ,ZPS_0CO_OM_NWA_2
Structure underlying infocube:
2 Data Sources >> 1DSO >>1 Infocube .
Usually the Data is loaded in delta format on daily basis using process chains.
For last one month the delta is not picking properly :
Example :
A WBS Element is created 2 years back and it open and getting its update into BW ,
latest amount or cost incurred for the WBS Element is not picked for certain WBS only :
I have Tried Giving a Full Infopack load to the DSO , but as DataStructure was migrated from 3.5 to 7 landscape :
its showing this error:
Request not updated to any data target using delta,
i went and created DTP which didnt help much Because latest isnt caputered .
if i goto RSA1old and find the full req and trigger it ,it says inti overlapping ,
how to over come this as this is a production issue
Obaid : pls help me on this issue , any others expert pls help

Request not updated to any datatarget in BI 7

Hi Experts,
We have working in BI 7.0.
1. There are delta loads are coming from LO extraction. As it is BI 7.0 till PSA data will be pull by Info Package afterwards DTP is going to take care to load further data targets. I can able to see the delta in my DSO but in data source level u201CUpdated Requestu201D was blank. And in Request update u201Crequest not updated to any data target using deltau201D. Even it showing this message but in DSO there is request number from DTP. Is any delta records are missing? If we are using DTP then it has update the Update Request as "Request Updated in data target" in data source level, correct?
2. In order make delta from DTP. As we donu2019t have Init in DTP can we put Full load for initialization then another delta DTP. Hence Full is going to take care of Init in DTP?

Hi Harsha
I am really sorry.. still could not understand your questions !
what do you mean by "If I check in Data Source level Manage?" .. are you talking about PSA manage?
Let me guess..
You want to track a request which is in the dso...
go the datasource(in BI) under your DSO.. you will find Info Pak's.. select the delta info Pak and click on monitor button on the top.. from there see the latest one and from there go the DTP and see whats the request Nbr whicg got into that DSO...
There are bunch of other tables which will give you the same info as well.. like RSDSREQ*...
and the last part " i.e what I'm wondering?".. Is that a question or statement.. I did not get it!
Thanks
KALYAN

Error in psa level - Request not updated to any data target using delta

Hi,
This is pavan and am facing this issue any one know for below issue to solve.
Data Flow is BW Version and Implemented in BI 7.20 version.The issue was data has come
to psa level but from here it is not updated to infocube so for that i have tried update manually
it is showing information that 1334 SID IS SMALLER THAN / EQUAL TO 47287 CANCELLED.
In Process Chain DTP is not included so how can i update data to infocube with out disturbing process chain
Regards,
Pavan Kumar

Hi Pavan Kumar ,
Please log on Tcode RSRQ -then give old request number (I think in your case 1334 is old request number),
and you will get monitor for that request then change the QM status to red after that load new request .
Thanks
Hanumanthu

Inbox Search - status for service request not updated

Hi,
In inbox search, the status change for a service request does not reflect until the user log offs or opens the service request in edit mode. PFB the steps followed. (Two users are monitoring the service request but is being processed only by one)
Web UI window 1(User 1): I open the inbox search result page. Service requests are displayed with the status field
Web UI window 2(User 2): In a separate window, the service request is approved by changing the status of the service request to Approved.
Web UI window 1(User 1): In the inbox result screen, i click on search for the same search criteria, but still the old status of the service request(updated in window 2) is displayed.
Observation:
1. If I open the service request, the service request still has the old status. If i click on edit, the new status is displayed. If i click on Back button (without clicking on edit), the new status is refelected for the service request in the inbox result page now.
2. If I log off and again open the inbox result, the new status of the service request is reflected.
3. The status of the service request is updated in the database immediately user 2 changes the status.
There is no enhancement done for the inbox search. The behavior is for standard inbox result.
Please provide any pointers to resolve this issue.
Regards,
Radhika
Edited by: Radhika Chuttani on Jan 5, 2011 7:13 AM

Radhika,
This is standard behavior in the SAP inbox. The reason is that SAP buffers search results in the Inbox in order to improve performance. So even though you hit "search" again, SAP does not update the search results because this search has already been executed in this session. Clicking "End" or logging off refreshes the buffer.
SAP released a note to update the "Responsible Employee" in the Inbox without requiring the user to log off. You can see their explanation and the solution here:
https://service.sap.com/sap/support/notes/1465966
If you want to enable inbox refresh every time a search is executed, you will probably have to do custom coding. My guess is that you may be able to leverage the CRM_IC_INBOX_BADI. Let me know if this much info is enough or if you want further details on how to technically achieve this.
Rahul

Request not updated to any data target using delta

I am on BI 70 using 70 DataSource. I executed InfoPackage in full update, then ran DTP in full mode. There is only 1 data target. The requests were successfully updated in the target DSO. However, when I checked the datasource PSA, the requests were showing u201CRequest not updated to any data target using deltau201D with red triangle.
My questions are:
1. Is this normal?
2. I need to do more full loads. When I run DTP (in full mode) again, will it re-load those PSA requests (the ones already in DSO) to the same data target?
Thank you.
Rebecca

Hi Rebecca,
To answer your questions
1. Yes. This is normal.
2. Yes. When you run DTP in Full Mode again, this PSA request (along with any other subsequent loads you might have done to PSA) would be re-loaded to the same data target .
If this is not required you can set the DTP to delta mode. This ensures that the PSA request is updated to data target only once.
Hope this helps!
- Meera

Trnsport request not updated

dear all
I have copied remote clint copy profile sap_ucus production to development server .if i am crate any role i have succesfully tranported but when i finencial custamizing etc production server shows import successfuly ,but cuatimizing not updated .
i am not understang why system has been not updated
thanks
with best regards
venkat

Hi,
If you want copy the customizing client setting...
Best way to use Export/import method
Regards
Prabhu

Task Request not updating in Outlook 2010

My manager has sent me a few Task Requests in Outlook 2010. He receives an email message saying I've accepted the task but he cannot see any notes I write in the task, even though he ticks the "keep an updated copy of the task on my task list".
He can just see a copy of the original task he sent to me.
I am the only one this does not work for, everyone else can see updated tasks absolutely fine and weirdly, if I send him a task and he accepts it, I can see any updates he makes (note that this is without pressing the "send status report" button.)
Any ideas?

Hi,
Actually, we have a dedicated support team regarding the Microsoft Outlook. I recommend you ask your question on our Microsoft Outlook forum which is staffed by more experts specializing in this kind of problems. The above thread Ed Crowley provided is exactly
the Outlook forum.
Thanks for your understanding.
If there is any problem with Exchange Server, welcome to our Exchange forum.
Best regards,
Amy
Amy Wang
TechNet Community Support

Can not update- message says you are already running the adobe application manager - but it is not open

I'm trying to update Indesign and Photoshop. I get a message saying that the Updates could not be applied - you are already running the Adobe Application Manager - but I have closed everything. It may be related to the fact that today, about every 2 minutes, Adobe Creative Cloud Connection pops up. I have closed it numerous times, but it continues to open.

Terminate the process(es) in Task Manager/ Activity Monitor.
Mylenium

Since Sunday my ipad does not update messages from my yahoo mail account. I have done a reset of both ipad and router and still nothing works. How can I access my emails on my ipad?

Hi,
My ipad stopped updating my mail from yahoo. How can I solve this problem?

Go into the settings, mail, contacts and calendars and delete your yahoo account info. Exit out, go back in and re-enter your mail info. Sometimes things get messed up and the easiest way to fix it is just to start over. You will have to redownload your mail but you shouldn't lose anything. I've had to do this with my yahoo mail a few times.

Messaging threads not updating - Lumia 925

I have an issue with my Lumia 925 and teh messages not updating. messages are coming un, flash up on thehome screen but when i go to messages i can see there is a new message but the thread doesnt update. This is the same for all users.
I have treid locating the backup so i can wipe and restore the phone but sky drive doesnt show it and i cant see a way to back up manually. i dont want to reset the phone without backing up first.
Has any one else seen this issue with messages not updating? please help....

check the time and date settings of the phone.
The backup feature in the settings does save your SMS to the cloud. There is no way to access the backup. You can restore the backup after you reset the phone.

RMCVNEUF....billing document not updating

The business recently made a change to the Item Categories that update LIS/SIS. They want us to load all historical documents with this Item Category to our SIS structures and DW. There was a change made to RMCVNEUF to allow for us to search all billing documents where Item Category = NLC, allowing us to use the statistical updating program to load only the historical documents wanted.
As a test, I found on NLC document and run it thru RMCVNEUF. I have checked the Redetermine Update Group check box. I get a message back saying: Data from billing document 9000878658 was not updated
Message no. M2210
Diagnosis
Data from documents used as a basis is required for the processing of billing documents.
System Response
The data in the billing document 9000878658 will not be updated
System Response
Ensure that all sales orders and delivery notes are processed before the billing documents.
NLC item category is now configured in SPRO to be statistically relevant. Why would this not update using RMCVNEUF? Config was changed on 4/16/10 to allow for NLC to update. It seems any document created with this item category prior to that date will not be updated using RMCVNEUF? Any ideas? Not sure of a better/easier way to get only the documents we want to load to SIS and then DW.
Thank you
Theresa

Note 142349 says
Summary
Symptom
If in the statistical setup of the sales information system you select option 'Redetermine update group', the following error messages may occur:M2206, M2207, M2208, M2209, M2210, M2211.
The documents specified in the messages may be displayed correctly during an update simulation.
Additional key words
OLI8, OLI9, RMCVNEUL, RMCVNEUF
Cause and prerequisites
During the redetermination of the update group in the reorganization, information from preceding documents is written to the intermediate tables MCVSRFK (document header) and MCVSRFP (document item), which are relevant for the determination of the update group of the subsequent documents.
Solution
To fill these intermediate tables, the reorganization of sales orders must be performed before the reorganization of deliveries or the reorganization of sales orders and deliveries must be performed before the reorganization of billing documents (in each case with option 'Redetermine update group'.
Note
After the successful reorganization the above-mentioned help tables should be deleted with report RMCVNEDE to avoid uneccessary data collection and the increasing loss in performance during the following reorganization runs.
thanks
G. Lakshmipathi

RMCVNEUF - document not updated

The business recently made a change to the Item Categories that update LIS/SIS. They want us to load all historical documents with this Item Category to our SIS structures and DW. There was a change made to RMCVNEUF to allow for us to search all billing documents where Item Category = NLC, allowing us to use the statistical updating program to load only the historical documents wanted.
As a test, I found on NLC document and run it thru RMCVNEUF. I have checked the Redetermine Update Group check box. I get a message back saying: Data from billing document 9000878658 was not updated
Message no. M2210
Diagnosis
Data from documents used as a basis is required for the processing of billing documents.
System Response
The data in the billing document 9000878658 will not be updated
System Response
Ensure that all sales orders and delivery notes are processed before the billing documents.
NLC item category is now configured in SPRO to be statistically relevant. Why would this not update using RMCVNEUF? Config was changed on 4/16/10 to allow for NLC to update. It seems any document created with this item category prior to that date will not be updated using RMCVNEUF? Any ideas? Not sure of a better/easier way to get only the documents we want to load to SIS and then DW.
Thank you
Theresa

Hi Cathy,
It is genrated profit center document also but its not updated in Consolidation (Profit center dimension). If u have idea about this please help me.
Thanks
K.Satish

"Request not updated" message misleading

Similar Messages

Maybe you are looking for