Request to convert multiple files from LV 3.1 to LV 2011 or more

Dear Friends,
Can someone please upconvert the attached LabVIEW VI files to LV 2011 or later..?
Thanks in advance.
Solved!
Go to Solution.
Attachments:
1287-LV 3.1.zip ‏259 KB

Saved in 8.2.1, which you can open with anything newer.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
SI1287.zip ‏211 KB

Similar Messages

How to store multiple files from SAp in to Application server?

Hi Guys,
 Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
 Any Logic or Code for how to do is welcomed.
 plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
 DIRNAME(200) TYPE c, " name of directory.
 sp_name(100) TYPE c," name of entry. (may end with *)
 END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
 dirname(75) TYPE c, " name of directory.
 aliass(75) TYPE c, " alias for directory.
 svrname(75) TYPE c, " svr where directory is availabl
 sp_name(75) TYPE c, " name of entry. (may end with *)
 sp_cs(10) TYPE c, " ContainsString pattern for name
 END OF isearchpoints.
data: l_file type filetable.
data: l_rc type i.
data: itab type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 FILENAME = in_file
 "FILETYPE = 'BIN'
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = ' '
 HEADER_LENGTH = 0
 READ_BY_LINE = 'X'
 DAT_MODE = ' '
TABLES
 DATA_TAB = itab
EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 OTHERS = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
 TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
 move g_tmp_file_path to in_file.
 h_destin = ''.
 SPLIT g_tmp_file_path at '\' into table itab.
 loop at itab into g_tmp_file_path.
 h_destin = g_tmp_file_path.
 endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies TYPE TABLE OF dfies.
DATA: lwa_dfies TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
 EXPORTING
 tabname = '/BI0/PCO_AREA'
 lfieldname = 'CO_AREA'
 IMPORTING
 dfies_wa = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT = 'Destination directory'.
lwa_dfies-LENG = 100.
lwa_dfies-INTLEN = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 RETFIELD = 'SP_NAME'
 DYNPPROG = SY-REPID
 DYNPNR = SY-DYNNR
 DYNPROFIELD = 'destin'
 VALUE_ORG = 'S'
 TABLES
 VALUE_TAB = searchpoints
 FIELD_TAB = lt_dfies
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3.
*& Form select_input_file_name
* text
form select_input_file_name.
* call function 'F4_FILENAME'
* exporting
* program_name = sy-repid
* dynpro_number = sy-dynnr
* field_name = 'PATH'
* importing
* file_name = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. "select_input_file_name
*& Form WRITE_DB_HOME
* Write DB home directory
* no parameters
FORM write_db_home.
CASE sy-dbsys(3).
 WHEN 'ORA'.
 CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
 ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ORAHOME', 30 searchpoints-dirname.
 MOVE: 'DIR_ORAHOME' TO searchpoints-sp_name.
 APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
 WHEN 'ADA'.
 CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
 ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ADA_DBROOT', 30 searchpoints-dirname.
 MOVE: 'DIR_ADA_DBROOT' TO searchpoints-sp_name.
 APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
 WHEN 'INF'.
 CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
 ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
 MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
 APPEND searchpoints..
*--- C5056155 End of ALV -------------------------------*
 WHEN 'DB6'.
 CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
 ID 'VALUE' FIELD searchpoints-dirname.
 IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_DB2_HOME', 30 searchpoints-dirname.
 MOVE: 'DIR_DB2_HOME' TO searchpoints-sp_name.
 APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
 ELSE.
 EXIT.
 ENDIF.
 WHEN OTHERS.
 EXIT.
ENDCASE.
ENDFORM. " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
 WHERE svrname = sy-uname.
 MOVE isearchpoints-dirname to searchpoints-dirname.
 MOVE isearchpoints-aliass to searchpoints-sp_name.
 APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
 WHERE svrname = 'all'.
 MOVE isearchpoints-dirname to searchpoints-dirname.
 MOVE isearchpoints-aliass to searchpoints-sp_name.
 APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
 PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
 PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
 PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
 PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN' TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
 DATA: windir_path(64), programfiles_path(64).
* hoping that ProgramFiles is set in service user environment
 CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
 ID 'VALUE' FIELD programfiles_path.
 IF programfiles_path IS INITIAL.
* %ProgramFiles% not available. guess from windir
 CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
 ID 'VALUE' FIELD windir_path.
* e.g. S:\WINDOWS ==> S:\Program Files
 CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
 ENDIF.
 CONCATENATE programfiles_path '\SAP\hostctrl'
 INTO searchpoints-dirname.
ELSE.
* on UNIX, the path is hard coded
 searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
 ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
 IF sy-opsys = 'Windows NT'.
 searchpoints-dirname = '.\'.
 ELSE.
 searchpoints-dirname = './'.
 ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB' TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
 ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
 h_ind = sy-tabix.
 IF searchpoints-sp_name IS INITIAL.
 DELETE searchpoints INDEX h_ind.
 ENDIF.
ENDLOOP.
ENDFORM.

Convert multiple files (word docs) to multiple pdf

Hi,
Is there a script I can use in batch processing to convert about 1500 word documents into pdf? I know it's possible to convert multiple files into one pdf, but this is no good to me. Doing these conversions one by one is going to take forever!
I've tried selecting a few documents at a time and then selecting "convert to pdf" from the right-click menu, but each one requires that you tell it where to save, and then opens the file when it is done.
I need to convert Word files on a regular basis for work, and could really use a batch process for this with so many to do!
I have Acrobat 7 Pro (version 7.1.0) on XP Pro SP 2 at work, and Acrobat 8 Pro (Version 8.1.2) on XP Pro SP 3 at home.
If there is anyway it's possible to do this via a batch process I would really appreciate knowing how!!
Apologies if this has been covered in another thread, I searched but couldn't find anything.
Thanks in advance :)

I have Acrobat 9 Pro. I can batch convert Word docs to PDFs by doing this:
1. Open Acrobat Pro. Click File > Create PDF > Batch Create Multiple Files...
2. A window will open prompting you to add files. Click Add Files > Add Files... OR Add Folders... If adding a folder, navigate to it, and click OK to add it to the list. You can also select a bunch of files and drag & drop them into the Add Files window.
3. Once you have all the files listed that you want to convert, click OK. A new window called Output Options will open. In this window, select your preferred settings. For me, I want all the new PDFs to have the same filename and be in the same folder as the Word docs, so I choose these settings:
4. Click OK, and then the batch process will begin running. You will see Word opening and closing. However, you won't have to click Save or anything. You can run it unattended. The process takes a little while, so I usually set up a batch to run, then go to lunch. Once finished, you should have all your new PDFs:
Hope that helps someone!

Select multiple files from a PC to upload to icloud

I have icloud installed on my PC - I also have the the web link to upload files from my computer -
I'm unable to get more than one file at a time to upload - HELP -
I have 100's of files to upload to icloud - I'm mainly using pages and numbers -
I have the latest software, etc - and am using an ipad 4 -
thanks
glen

Hello tacomadm18,
The following article details several methods for uploading documents to iCloud (including multiple documents). Note that, when selecting documents to upload, a single document in the group chosen that is not compatible will prevent the entire group from being uploaded (e.g.: choosing four Pages documents and one PDF will prevent any of the documents from being uploaded, whereas choosing only the four Pages documents will upload those four documents).
iCloud: Access iWork documents stored in iCloud
http://support.apple.com/kb/PH2704
Cheers,
Allen

Fetching of multiple files from Application Server into SAP Program

Hi All,
I have a issue related Fetching of multiple files from Application Server into SAP Program.
Actual issue is as below.
In the selection screen of my program i will give Application Server Path as :
/PW/DATA/SAP/D1S/PP/DOWN/eppi0720*
Then the based on above input it should pick up all the files that are matching eppi0720* criteria.
Suppose if i am having 5 files with above scenario, i have to fetch all those 5 files at a time and place in my SAP Program.
All those 5 file's data should come into SAP at a time.
Can anybody tell me how can we solve above issue.
If any body has come across same issue please provide me with solution.
Thanks in advance.
Thanks & Regards,
Rayeez.

If you want to get around the authorization check, you can do something like this.
report zrich_0001 .
parameters: p_path type epsf-epsdirnam
 default '/usr/sap/TST/SYS/global'.
parameters: p_file type epsf-epsfilnam default 'CO*'.
start-of-selection.
perform get_file_list.
* FORM get_file_list *
form get_file_list.
types: name_of_dir(1024) type c,
 name_of_file(260) type c,
 name_of_path(1285) type c.
data: begin of file_list occurs 100,
 dirname type name_of_dir, " name of directory. (possibly
 " truncated.)
 name type name_of_file, " name of entry. (possibly
 " truncated.)
 type(10) type c, " type of entry.
 len(8) type p, " length in bytes.
 owner(8) type c, " owner of the entry.
 mtime(6) type p, " last modification date, seconds since 1970
 mode(9) type c, " like "rwx-r-x--x": protection mode.
 useable(1) type c,
 subrc(4) type c,
 errno(3) type c,
 errmsg(40) type c,
 mod_date type d,
 mod_time(8) type c, " hh:mm:ss
 seen(1) type c,
 changed(1) type c,
 end of file_list.
data: begin of file,
 dirname type name_of_dir, " name of directory. (possibly
 " truncated.)
 name type name_of_file, " name of entry. (possibly
 " truncated.)
 type(10) type c, " type of entry.
 len(8) type p, " length in bytes.
 owner(8) type c, " owner of the entry.
 mtime(6) type p, " last modification date, seconds since 1970
 mode(9) type c, " like "rwx-r-x--x": protection mode.
 useable(1) type c,
 subrc(4) type c,
 errno(3) type c,
 errmsg(40) type c,
 mod_date type d,
 mod_time(8) type c, " hh:mm:ss
 seen(1) type c,
 changed(1) type c,
 end of file.
call 'C_DIR_READ_FINISH' " just to be sure
 id 'ERRNO' field file_list-errno
 id 'ERRMSG' field file_list-errmsg.
call 'C_DIR_READ_START' id 'DIR' field p_path
 id 'FILE' field p_file
 id 'ERRNO' field file-errno
 id 'ERRMSG' field file-errmsg.
if sy-subrc <> 0.
 sy-subrc = 4.
 exit.
endif.
* Read the file list and add to internal table.
do.
 clear file.
 call 'C_DIR_READ_NEXT'
 id 'TYPE' field file-type
 id 'NAME' field file-name
 id 'LEN' field file-len
 id 'OWNER' field file-owner
 id 'MTIME' field file-mtime
 id 'MODE' field file-mode
 id 'ERRNO' field file-errno
 id 'ERRMSG' field file-errmsg.
 if sy-subrc = 1.
 exit.
 endif.
 append file to file_list.
enddo.
* Write out the file list
loop at file_list.
 write:/ file_list-name.
endloop.
endform.
Regards,
Rich Heilman

How can I convert multiple files at one time and not one at a time

How can I convert multiple files at one time and not one at a time

Hi Plissey1950,
Sorry for the lengthy delay to a response. Are you trying to convert multiple files to individual PDF files at the same time? (not combine them). If so, you'll need to use Adobe Acrobat for this function. The CreatePDF service does not have the ability to convert multiple files to multiple individual PDF files.
Thanks,
David

How can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

how can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

Turns out the answer to that question changes if you ask it more than 4 times, so ask it again....
The answer depends on the type of video files you want to convert. If they are DRM protected commercial videos, no help can be given here. Google.

How do I retrieve multiple files from my trashcan?

I removed everything from my "finder" to my trashcan; I found that I had multiple duplicates in images, and I thought that was an easy way to get rid of them. But then my iPhoto started acting weird and when I contacted support, was told that I had to "put back" each file. There are roughly 17,000 images. I am overwhelmed to say the least. Suggestions? I tried highlighting several at a time, but that doesn't work.

Yes, but it puts the files into a .zip file that is "corrupted, encrypted, empty or in an incompatible format".
Debbie
Don't tell God how big your storm is. Tell the storm how big your God is!
From: Pat Willener <[email protected]>
To: Debbie Fisher <[email protected]>
Sent: Wednesday, October 8, 2014 12:56 AM
Subject: how do i move multiple files from acrobat.com to my pc?
how do i move multiple files from acrobat.com to my pc?
created by Pat Willener in Adobe acrobat.com services - View the full discussionActually, if you go to https://cloud.acrobat.com/files you can check the checkboxes on the left of your files list, then click on the Download button to download multiple files. https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6802984-681636/900-380/acroba t.com.png Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6802984#6802984 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link. Start a new discussion in Adobe acrobat.com services by email or at Adobe Community For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

When I converted a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text. How can I solve this problem?

When I tried to convert a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text. How do I solve this problem? I don't know how to change it from Read Only.

Dear Sara
Thank you very much for sending the converted file. Yes, I am able to edit it - that will be very useful to me and I appreciate your help.
Referring to your previous message when you said you'd converted via Acrobat and not Acrobat.com, I'm converting via Acrobat.com because that's the only option that is shown (how do I convert via Acrobat? - perhaps that would be more successful). I'm using the Export PDF website, and the OCR is enabled to "Recognize text in English UK". However, I've just tried converting a different LPA pdf form, this time for Health & Welfare https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/245571/LPA114_He alth_welfare_LPA.pdf and again I have the same problem as before. I've altered it from "Read only" and thought I'd then be able to enter text, but "Drawing Tools" is shown in the pane and I'm unable to enter anything onto the form - everything appears to be in images. Also, the lettering on the heading of' page 1 has become jumbled, with the word "Public" overlaying the word "Guardian." Any suggestions as to what it is I'm doing wrong would be welcome - I don't like to be beaten!
Regards,
Judith.

To Move Multiple Files from one directory to another.

Hi,
I need to move multiple files from one directory in UNIX (application server ) to another. I need something like an FM 'STRALAN_COPY_FILES' which is also valid in ECC 6.0.
Thanks in advance.

Hello Sachin
Below you see a copy of how to use EPS_FTP_PUT using transaction SE37.
Import parameters               Value
RFC_DESTINATION =                 NONE
LOCAL_FILE             =         filename
LOCAL_DIRECTORY   =              /dir1/dir2
REMOTE_FILE             =        filename
REMOTE_DIRECTORY   =             /dir1
OVERWRITE_MODE        =          F        " force -> overwrite existing file
TEXT_MODE                    =   B               " binary
TRANSMISSION_MONITOR            X       " display transmission monitor
*RECORDS_PER_TRANSFER            10
*REQUESTED_FILE_SIZE             0
*MONITOR_TITLE
*MONITOR_TEXT1
*MONITOR_TEXT2
*PROGRESS_TEXT
*OBJECT_NAME
Regards,
Uwe

How to convert a file from pdf to txt in java

hi,
in my project ,I want to convert a file from pdf to txt using java api. If anyone
have any idea about it plz help me.

Google has several ideas. :)

Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in

Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in german "Fehler bei der Anmeldung"). I hope have explained the issue on the right way with my bad english. Do you have a solution for it?? Best regards, Marcus Wenk

yes, you are right. it is the adobe reader via exportPDF. but it should be the acrobat. it was written on the internetpage...

Is there a way to email multiple files from pages

I want to send multiple files from pages, cover letter and resume, but when I select both files, the share icon goes dull and it can't be selected. Is there a work around for this?

Are you aware that someone without Pages cannot open the files? And that Pages will only run on OS X? Your best bet is do save the files as PDFs, then just drag the icons into your open email.
Walt

HT2470 how would i go about taking multiple files from documents and make them part of 1 master file

how would i go about taking multiple files from documents and make them into 1 master file? I want to put all documents associated with this project together for easier access.

From the finder window, click File, click new folder, you can drag all documents into that Folder making it the master folder. You can ajso drag folders into the Master folder, and have them as sub-folders if you wish to do that. Either way they will all be in one master folder.

Want to convert a file from Windows XL to PDF

Want to convert a file from Windows XL to a PDF can this be don?

Search!
http://lmgtfy.com/?q=convert+xl+file+to+pdf

Request to convert multiple files from LV 3.1 to LV 2011 or more

Similar Messages

Maybe you are looking for