Select multiple files from a PC to upload to icloud

I have icloud installed on my PC - I also have the the web link to upload files from my computer -
I'm unable to get more than one file at a time to upload - HELP -
I have 100's of files to upload to icloud - I'm mainly using pages and numbers -
I have the latest software, etc - and am using an ipad 4 -
thanks
glen

Hello tacomadm18,
The following article details several methods for uploading documents to iCloud (including multiple documents). Note that, when selecting documents to upload, a single document in the group chosen that is not compatible will prevent the entire group from being uploaded (e.g.: choosing four Pages documents and one PDF will prevent any of the documents from being uploaded, whereas choosing only the four Pages documents will upload those four documents).
iCloud: Access iWork documents stored in iCloud
http://support.apple.com/kb/PH2704
Cheers,
Allen

Similar Messages

Auto selection of file from folder during uploading??

Hi all friends,
Iam facing with one problem I am developing one uploading software for that i have used swing and servlet.Now my problem is i want to give auto selection of file from one folder means user just copy the files from any computer on network and paste it in predefind folder.And when they click on upload button it should start uploading of file one by one and after completion of uploading it move that file into another folder one by one.Now my software doing it perfectly but if user copy and paste any file in that predifined folder from network computer during uploading then they have to click upload button again after completion of first queue of files(for example if user first copy 10 files and start uploading and inbetween uploading of that 10 files if user copy another 10 files from network computer then they have to click on upload button again after completion of uploading of first 10 files).But my user requirement is they want to click on upload button once only at the time of starting my application and my application automatically select the file one by one from folder and send it to destination.Means if they copy the file from network machine inbetween uploading or any other user from network send file in that folder then my application should select those file automatically and start uploading means they don't want to click on upload button again.Can any one plz guide how I can slove this problem.Below r my codes:-
Upload.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
try {
suspendflag=true;
Resume.setEnabled(false);
Suspend.setEnabled(false);
dest=frame.m_txtURL.getText();
File ff=new File("d:\\DTMS\\Upload");
File[] files = ff.listFiles();
fileList = new Vector();
if(files == null)
textArea.append("There is no file");
return;
else
for (int j = 0 ; j< files.length ; j++)
fileList.add(files[j]);
java.util.Collections.sort(fileList, new FileComp());//sorting by size
new Thread(new Runnable() {
public void run(){
for (int k = 0; k < fileList.size(); k++)//loop for queue {
File fname = (File)fileList.get(k);
String str=fname.getName();
log("Destination:" +" "+ dest);
log("Uploading Progress\nPlease Wait....");
result=doPost(fname,dest);//method for read file & send to servlet
String str2="Transfer apparently failed.";
String str3=result;
if(str2.equals(str3)){
Error(result);
else if(suspendflag==true){
File newfile =new File("d:\\DTMS\\Archives\\"+str);
fname.renameTo(newfile);
log("File" +" "+ str+" "+"Upload Completed !");
else if(suspendflag==false){
Error("** Transfer Suspended**");
}).start();
}catch(Exception exp)
Error("Error : " + exp.toString());
Regards
Bikash

Hi Chandan,
 All the multiselection files are stored in it_tab( i:e file_table in method). you need to loop the every record to upload the data for selected files. please check the code Below...
DATA: file_str1 type string.
data: it_tab TYPE STANDARD TABLE OF file_table,
 wa_tab TYPE file_table,
 lw_file LIKE LINE OF it_tab,
 gd_subrc TYPE i.
SELECTION-SCREEN begin of block blk with frame title text-100.
SELECTION-SCREEN SKIP 2.
parameters : p_file like rlgrap-filename .
SELECTION-SCREEN end of block blk.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = 'Select only Text File'
default_filename = '.azt'
multiselection = 'X'
CHANGING
file_table = it_tab
rc = gd_subrc.
*READ TABLE it_tab INTO lw_file INDEX 1.
*p_file = lw_file-FILENAME.
Start-of-Selection.
loop at it_tab INTO wa_tab.
 file_str1 = wa_tab-FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = file_str1
* filename = '\\10.10.1.92\Volume_1\_projekte\Zeiterfassung-SAP\test.azt'
 tables
 data_tab = it_string
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.

Can't select and print multiple files from Mac OS' Finder

I'm using Acrobat Reader on Mac OSX. I'm used to be able to select multiple files in Finder and then press Apple-P to print all of them in one batch. Reader blocks this, by opening the first of the documents and then display the Print Setup dialogue, instead of just printing the document according to the default settings.
When the dialogue is displayed, the reader is blocked from opening and printing the remaining documents, and just displays an error message that it couldn't open them. That is not a nice behaviour.

Hi Mikael,
It is not possible to open another document while printing another document through Acrobat.
You might want to create an action in Acrobat to print all the pdf's in a particular folder.
Regards,
Rave

How to store multiple files from SAp in to Application server?

Hi Guys,
 Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
 Any Logic or Code for how to do is welcomed.
 plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
 DIRNAME(200) TYPE c, " name of directory.
 sp_name(100) TYPE c," name of entry. (may end with *)
 END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
 dirname(75) TYPE c, " name of directory.
 aliass(75) TYPE c, " alias for directory.
 svrname(75) TYPE c, " svr where directory is availabl
 sp_name(75) TYPE c, " name of entry. (may end with *)
 sp_cs(10) TYPE c, " ContainsString pattern for name
 END OF isearchpoints.
data: l_file type filetable.
data: l_rc type i.
data: itab type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 FILENAME = in_file
 "FILETYPE = 'BIN'
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = ' '
 HEADER_LENGTH = 0
 READ_BY_LINE = 'X'
 DAT_MODE = ' '
TABLES
 DATA_TAB = itab
EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 OTHERS = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
 TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
 move g_tmp_file_path to in_file.
 h_destin = ''.
 SPLIT g_tmp_file_path at '\' into table itab.
 loop at itab into g_tmp_file_path.
 h_destin = g_tmp_file_path.
 endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies TYPE TABLE OF dfies.
DATA: lwa_dfies TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
 EXPORTING
 tabname = '/BI0/PCO_AREA'
 lfieldname = 'CO_AREA'
 IMPORTING
 dfies_wa = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT = 'Destination directory'.
lwa_dfies-LENG = 100.
lwa_dfies-INTLEN = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 RETFIELD = 'SP_NAME'
 DYNPPROG = SY-REPID
 DYNPNR = SY-DYNNR
 DYNPROFIELD = 'destin'
 VALUE_ORG = 'S'
 TABLES
 VALUE_TAB = searchpoints
 FIELD_TAB = lt_dfies
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3.
*& Form select_input_file_name
* text
form select_input_file_name.
* call function 'F4_FILENAME'
* exporting
* program_name = sy-repid
* dynpro_number = sy-dynnr
* field_name = 'PATH'
* importing
* file_name = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. "select_input_file_name
*& Form WRITE_DB_HOME
* Write DB home directory
* no parameters
FORM write_db_home.
CASE sy-dbsys(3).
 WHEN 'ORA'.
 CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
 ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ORAHOME', 30 searchpoints-dirname.
 MOVE: 'DIR_ORAHOME' TO searchpoints-sp_name.
 APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
 WHEN 'ADA'.
 CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
 ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ADA_DBROOT', 30 searchpoints-dirname.
 MOVE: 'DIR_ADA_DBROOT' TO searchpoints-sp_name.
 APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
 WHEN 'INF'.
 CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
 ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
 MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
 APPEND searchpoints..
*--- C5056155 End of ALV -------------------------------*
 WHEN 'DB6'.
 CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
 ID 'VALUE' FIELD searchpoints-dirname.
 IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_DB2_HOME', 30 searchpoints-dirname.
 MOVE: 'DIR_DB2_HOME' TO searchpoints-sp_name.
 APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
 ELSE.
 EXIT.
 ENDIF.
 WHEN OTHERS.
 EXIT.
ENDCASE.
ENDFORM. " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
 WHERE svrname = sy-uname.
 MOVE isearchpoints-dirname to searchpoints-dirname.
 MOVE isearchpoints-aliass to searchpoints-sp_name.
 APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
 WHERE svrname = 'all'.
 MOVE isearchpoints-dirname to searchpoints-dirname.
 MOVE isearchpoints-aliass to searchpoints-sp_name.
 APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
 PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
 PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
 PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
 PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN' TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
 DATA: windir_path(64), programfiles_path(64).
* hoping that ProgramFiles is set in service user environment
 CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
 ID 'VALUE' FIELD programfiles_path.
 IF programfiles_path IS INITIAL.
* %ProgramFiles% not available. guess from windir
 CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
 ID 'VALUE' FIELD windir_path.
* e.g. S:\WINDOWS ==> S:\Program Files
 CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
 ENDIF.
 CONCATENATE programfiles_path '\SAP\hostctrl'
 INTO searchpoints-dirname.
ELSE.
* on UNIX, the path is hard coded
 searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
 ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
 IF sy-opsys = 'Windows NT'.
 searchpoints-dirname = '.\'.
 ELSE.
 searchpoints-dirname = './'.
 ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB' TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
 ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
 h_ind = sy-tabix.
 IF searchpoints-sp_name IS INITIAL.
 DELETE searchpoints INDEX h_ind.
 ENDIF.
ENDLOOP.
ENDFORM.

Flash Player on Android, select multiple files

We have a web app that uses a flash uploader and it works on Android phones and tablets but it will not let us select multiple files on these devices. Is this possible or is there a trick to get these devices to allow us to select more than one file at a time?
Thank you,
Keith

Flash Player for Android is no longer available. For more information, see here:
http://blogs.adobe.com/flashplayer/2012/06/flash-player-and-android-up date.html
Android users can still download and install Flash Player from the Archived Flash Player Versions page on the Adobe website.
Please refer : http://forums.adobe.com/thread/1061194
Please see this page for a list of all certified devices:Flash Player Certified Devices

How do you select multiple files on a macbook pro?

Can anyone tell me how to select multiple files at one time? I am so frustrated with the way macbook pro works that I really regret buying it. I hate that you can't select multiple files, and that my contact stuff keeps changing. It is certainly not like I was told...that I would never want to use a PC again. I would not buy another apple computer. I spent a lot of money to NOT be able to do things that I have always done with ease. Every time I think I have something figured out, it doesn't work the next time I go to use it in another program. If anyone has an answer to this, I would sure appreciate it.
And all of these so called wonderful updates to the operating system on all mac products have left me frustrated and liking my apple products far less than I did before. On my iphone I had to make the texts just huge to even be able to see the white writing on a blue background. Not sure who made these designs, but from my perspective, I can tell you they certainly weren't thinking about being user friendly in any way when they did it. So disappointed in all of my devices! I do not enjoy using my computer, ipad, or iphone even close to what I did before.

This is some information on the Finder.
http://support.apple.com/kb/ht2470
To select multiple files you can use the shift key with the mouse if they are in a contiguous list or the CMD key with the mouse if you have breaks in that list. You can also use the mouse to drag over the files you want to select.
The Macs are easy to use, I have used many versions of Windows, Linux and other operating systems and I find OS X is far the easiest, but that is me.
There are many instructional videos and texts on Apples web site and if you are near to an Apple store they do classes to help.
Hope you get used to it.

Fetching of multiple files from Application Server into SAP Program

Hi All,
I have a issue related Fetching of multiple files from Application Server into SAP Program.
Actual issue is as below.
In the selection screen of my program i will give Application Server Path as :
/PW/DATA/SAP/D1S/PP/DOWN/eppi0720*
Then the based on above input it should pick up all the files that are matching eppi0720* criteria.
Suppose if i am having 5 files with above scenario, i have to fetch all those 5 files at a time and place in my SAP Program.
All those 5 file's data should come into SAP at a time.
Can anybody tell me how can we solve above issue.
If any body has come across same issue please provide me with solution.
Thanks in advance.
Thanks & Regards,
Rayeez.

If you want to get around the authorization check, you can do something like this.
report zrich_0001 .
parameters: p_path type epsf-epsdirnam
 default '/usr/sap/TST/SYS/global'.
parameters: p_file type epsf-epsfilnam default 'CO*'.
start-of-selection.
perform get_file_list.
* FORM get_file_list *
form get_file_list.
types: name_of_dir(1024) type c,
 name_of_file(260) type c,
 name_of_path(1285) type c.
data: begin of file_list occurs 100,
 dirname type name_of_dir, " name of directory. (possibly
 " truncated.)
 name type name_of_file, " name of entry. (possibly
 " truncated.)
 type(10) type c, " type of entry.
 len(8) type p, " length in bytes.
 owner(8) type c, " owner of the entry.
 mtime(6) type p, " last modification date, seconds since 1970
 mode(9) type c, " like "rwx-r-x--x": protection mode.
 useable(1) type c,
 subrc(4) type c,
 errno(3) type c,
 errmsg(40) type c,
 mod_date type d,
 mod_time(8) type c, " hh:mm:ss
 seen(1) type c,
 changed(1) type c,
 end of file_list.
data: begin of file,
 dirname type name_of_dir, " name of directory. (possibly
 " truncated.)
 name type name_of_file, " name of entry. (possibly
 " truncated.)
 type(10) type c, " type of entry.
 len(8) type p, " length in bytes.
 owner(8) type c, " owner of the entry.
 mtime(6) type p, " last modification date, seconds since 1970
 mode(9) type c, " like "rwx-r-x--x": protection mode.
 useable(1) type c,
 subrc(4) type c,
 errno(3) type c,
 errmsg(40) type c,
 mod_date type d,
 mod_time(8) type c, " hh:mm:ss
 seen(1) type c,
 changed(1) type c,
 end of file.
call 'C_DIR_READ_FINISH' " just to be sure
 id 'ERRNO' field file_list-errno
 id 'ERRMSG' field file_list-errmsg.
call 'C_DIR_READ_START' id 'DIR' field p_path
 id 'FILE' field p_file
 id 'ERRNO' field file-errno
 id 'ERRMSG' field file-errmsg.
if sy-subrc <> 0.
 sy-subrc = 4.
 exit.
endif.
* Read the file list and add to internal table.
do.
 clear file.
 call 'C_DIR_READ_NEXT'
 id 'TYPE' field file-type
 id 'NAME' field file-name
 id 'LEN' field file-len
 id 'OWNER' field file-owner
 id 'MTIME' field file-mtime
 id 'MODE' field file-mode
 id 'ERRNO' field file-errno
 id 'ERRMSG' field file-errmsg.
 if sy-subrc = 1.
 exit.
 endif.
 append file to file_list.
enddo.
* Write out the file list
loop at file_list.
 write:/ file_list-name.
endloop.
endform.
Regards,
Rich Heilman

How do you select multiple files to drag

How do you select multiple files to drag from one folder to another? Is there a command?

Open the folder which has the contents you want to transfer. Press COMMAND 'A' and then all of the data should be highlited in blue. Drag it to the new folder.
If only certain files are to be transferred, then you have to select them (COMMAND 'A') individually and the drag them as a group to the new location.
Ciao.

Can no longer print multiple files from a PDF package

Prior to our upgrade to Acrobat Pro X, we had the ability to print multiple files within a PDF package. We would simply select the files we wanted to print, say print and it would print them all. It no longer does so, although it still allows us to select multiple files and to select ALL from the print menu but then it only sends the first file to the printer.
We have tried it on both Windows XP and Windows 7 and it won't work correctly on either one.
Does anyone have any ideas? This is very frustrating as these packages are created by folks bundling their e-mail messages to send to the fileroom for printing and filing in the official case files. With the old method we were able to quickly print out all the messages without attachments, and then would only have to individually print those messages that had attachments. As stands now if we get a package with 100 messages in it we will have to select and print each file individually instead of being able to print the 75 without attachments as one print job and then only have to do the seperate handling for the remaining 25 with attachments.
Any and all suggestions are welcome.

I'm using windows 7. The Acrobat that came with the Adobe Creative Suit 4 is Adobe Acrobat Pro. When I am on a web site that has a page in PDF I click on the printer icon and the print page comes up but the preview side is blank and will not print the page.

How do I select multiple files under "Get File Info"and lock or unlock all?

How do I select multiple files under "Get File Info"and lock or unlock them all? It seems to do it automatically when I have 10 or more selected. But how do I lock or unlock 5 or 6 files in one swoop? Thanks

Select the desired files then press OPTION and select Show Inspector from the Finder's File menu.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

How to select Multiple files in ADF?

I have a requirement to select multiple files in my aaplication.
I know af:inputfile can select only one file and putting more af:inputfile component on the screen is not an option.
Can someone please help me on this
Thanks
RJ

Hi,
multiple file uploads is a feature of JDeveloper 12c (upcoming)
Frank

How to prompt user to select multiple files in file dialog using scripts

Hi, is there a way to allow user to select multiple files inside the file dialog using scripts? So not just something like "*.ai" or "*.eps" but where the user can actually use their shift key to select a batch of files inside the file dialog and then the script would process each one.
Thanks!

// Main Code [Execution of script begins here]
here's what I have so far. it would also be nice to not have illustrator stop at errors.. right now, it skips dialogs but on errors, it still stops.
// uncomment to suppress Illustrator warning dialogs
app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
var destFolder, sourceFolder, files, fileType, sourceDoc, targetFile, pdfSaveOpts, folderName;
var fullPath = "";
var finalSlash;
// Select the source folder.
sourceFolder = Folder.selectDialog( 'Select the folder with Illustrator .ai files you want to convert to PDF');
f = find_files(sourceFolder);
function find_files (dir)
 return find_files_sub (dir, []);
function find_files_sub (dir, array)
 var f = Folder (dir).getFiles ("*.*");
 for (var i = 0; i < f.length; i++)
 if (f[i] instanceof Folder)
 find_files_sub (f[i], array);
 else
 if (f[i].name.slice (-3).toLowerCase() == ".ai" || f[i].name.slice (-4).toLowerCase() == ".eps")
 //convert the array-listing to a string so we can manipulate it
 fullPath = String(f[i]);
 //find the position of the last / to indicate where the filename starts
 finalSlash = fullPath.lastIndexOf("/");
 //get the foldername by "slicing" from start to where finalSlash is located
 folderName = fullPath.slice(0, finalSlash).toLowerCase();
 sourceDoc = app.open(f[i]); // returns the document object
 // Call function getNewName to get the name and file to save the pdf
 targetFile_PNG = getNewName(".png");
 if(targetFile_PNG.exists) {
 } else {
 pngExportOpts = getPNGOptions();
 sourceDoc.exportFile(targetFile_PNG, ExportType.PNG24, pngExportOpts );
 targetFile_PDF = getNewName(".pdf");
 pdfSaveOpts = getPDFOptions();
 sourceDoc.saveAs(targetFile_PDF, pdfSaveOpts );
 targetFile_SVG = getNewName(".svg");
 svgSaveOpts = getSVGOptions();
 sourceDoc.exportFile(targetFile_SVG, ExportType.SVG, svgSaveOpts );
 sourceDoc.close();
 array.push (f[i]);
getNewName: Function to get the new file name. The primary
name is the same as the source file.
function getNewName(ext)
 var ext, docName, newName, saveInFile, docName, finalDot
 var loop = 0;
 docName = sourceDoc.name;
 ext = ext; // new extension for pdf file
 newName = "";
 finalDot = sourceDoc.name.lastIndexOf(".");
 while(loop < finalDot)
 newName += docName[loop];
 loop = loop + 1;
 newName += ext; // full pdf name of the file
 newName = newName.replace(" [Converted]","");
 // Create a file object to save the pdf
 saveInFile = new File( folderName + '/' + newName );
 return saveInFile;
getPDFOptions: Function to set the PDF saving options of the
files using the PDFSaveOptions object.
function getPDFOptions()
 // Create the PDFSaveOptions object to set the PDF options
 var pdfSaveOpts = new PDFSaveOptions();
 // Setting PDFSaveOptions properties. Please see the JavaScript Reference
 // for a description of these properties.
 // Add more properties here if you like
 pdfSaveOpts.acrobatLayers = false;
 pdfSaveOpts.colorBars = false;
 pdfSaveOpts.colorCompression = CompressionQuality.AUTOMATICJPEGHIGH;
 pdfSaveOpts.compressArt = true; //default
 pdfSaveOpts.embedICCProfile = false;
 pdfSaveOpts.enablePlainText = false;
 pdfSaveOpts.generateThumbnails = false; // default
 pdfSaveOpts.optimization = true;
 pdfSaveOpts.pageInformation = false;
 pdfSaveOpts.preserveEditability = true;
 return pdfSaveOpts;
function getSVGOptions()
 var svgSaveOpts = new ExportOptionsSVG();
 //just using defaults aside from what's written below
//see http://cssdk.host.adobe.com/sdk/1.0/docs/WebHelp/references/csawlib/com/adobe/illustrator/ ExportOptionsSVG.html
svgSaveOpts.embedRasterImages = true;
svgSaveOpts.sVGTextOnPath = true;
 return svgSaveOpts;
function getPNGOptions()
 // Create the PDFSaveOptions object to set the PDF options
 var pngExportOpts = new ExportOptionsPNG24();
 // Setting PNGExportOptions properties. Please see the JavaScript Reference
 // for a description of these properties.
 // Add more properties here if you like
 pngExportOpts.antiAliasing = true;
 pngExportOpts.artBoardClipping = false;
 pngExportOpts.horizontalScale = 100; // scaling to 350%
 pngExportOpts.saveAsHTML = false;
 pngExportOpts.transparency = true;
 pngExportOpts.verticalScale = 100; // scaling to 350%
 return pngExportOpts;

Selecting multiple files with mouse now wonky

Using Windows 8.1 on HP machine
All updates up-to-date
Hardware: Microsoft Intellimouse Explorer 3.0
Explorer Folder Option selected: Single-click to open an item (point to select); Underline icon titles only when I point on them
Display: Detail list (Ctrl + Shift + 6)
No touch input
Here's the problem: For as long as I have used windows, I can select multiple files by pressing ctrl-left mouse button. If I want to select multiple consecutive files, I move my cursor down to the last file in the list and press shift-left mouse button.
If I want to select multiple files that are not listed consecutively, I move my cursor along the list of files and press ctrl-left mouse button to select each individual file.
This does not work for me any longer and I do not know why.
Often I will press ctrl-left mouse click and the file will not select. When I move my mouse away from the file I've selected, it will UN-select. If I continue to press the CTRL key while attempting to select another file and float my mouse cursor down the
list of files to select ONE single file further in the list, ALL the files in between the first file I click and the final file will become selected.
Moving the mouse cursor carefully and steadily to select individual files yields varied results; sometimes I can select individual files; sometimes, I can click multiple times to select an additional file and the file will not become selected. More often
than not, I will select several files and earlier files will become unselected.
Extremely frustrating.
I have been a Windows user since version 3.1 and this has never happened to me. I have been a Windows 8.1 user for over a year now and this is a new wrinkle. I have done system restore multiple times and it has not solved the problem. I have uninstalled
Intellipoint/Microsoft Keyboard & Mouse center and reinstalled and the problem has not solved. I have checked every setting for my mouse in the mouse center and cannot see a setting that imposes this feature.
Changing folder options to Double-click to open an item (single click to select) solves the problem. I am able to navigate and organize my files the way I always have. Only happens when single-click feature is enabled. Please note: I have been using the
single-click select feature since Windows XP.
Your guidance and actual solution to this irritant is appreciated.

Hi,
During my test, I cannot repro this issue even I configure the same setting with you. Maybe a hardware issue or software issue.
Does this issue happen to other mouse?
Can you test in safe mode to check how it works?
Alex Zhao
TechNet Community Support

How do you select multiple photos from photostream to move to a folder

how do i select multiple photos from photostream to move to a folder in iphoto

Hello Tiggertiffany,
Thanks for using Apple Support Communities.
If you need to select multiple items on iCloud.com then you can use the common procedure to select multiple items by either holding Command or Shift on your keyboard.
To select multiple files or folders, hold down the Command (⌘) key, then click the items.
To select multiple files or folders that are listed together, click the first item you want to select, hold down the Shift key, then click the last item.
OS X Yosemite: select files or folders
Have a great weekend,
Alex H.

Is there a way to email multiple files from pages

I want to send multiple files from pages, cover letter and resume, but when I select both files, the share icon goes dull and it can't be selected. Is there a work around for this?

Are you aware that someone without Pages cannot open the files? And that Pages will only run on OS X? Your best bet is do save the files as PDFs, then just drag the icons into your open email.
Walt

Select multiple files from a PC to upload to icloud

Similar Messages

Maybe you are looking for