Request Wine release 0.9.37
request Wine release 0.9.37
pelle.k wrote:
it's much better than waiting 3 hours for wine to compile or waiting weeks for a dev to get around to it. OK!!!
Took me 20 minutes to compile the edited PKGBUILD...
Well it took me about 3 hours... But that's not really the point, if you had used the frugalware package it would have taken you 0 minutes to compile, depending on your proficiency 3 minutes to "fix" the frugal pkg to arch way. Still think it sounds better...
NOTE: I'm not suggesting doing stuff like this for people that don't know what they are doing(and you know who you are...) but for those of us who do I can't understand why anyone would spend time compiling and having a slow computer while doing it too...
Similar Messages
-
Client ,tranport ,request id,release
client ,tranport ,request id,release in detail?
Hi chandra,
Client ,tranport ,request id,release in detail?
Assuming you want to know about Transport connection in detail..
Transport connection -
> Grouping(Neccessary objects)(It works fine for me!!)---->Object Types>Eg(Cube)--
>Assign to a Transport Request(Truck icon).
*The following Transport sequence * :(Only Neccessary objects)
a)Info object catalog
b)Application component
c)Infocubes & ODS
d)Transfer rules/Update rules
e)Infopackages
f).Multiproviders
g).Queries/Workbooks
h)Process chains
Procedure:
1. SE09 - To release the Tasks(first) followed by the Request.
2.Ask your Basis to Import them request to the QA or Prod server.Or if you got authorization for STMS,you can import them request.(make sure u adjust import queue before attempting to import).
3.Check in the respective Target(QA/PROD) on whether the BW Objects are transported fine.
I guess this is what u asked for!!!!!!!!!
cheers
Arun -
Transport request not releasing
Hi All,
While releasing transport request it takes more than 24 hours but still
not yet released. task has been released. Other requests are releasing and importing going fine. but one request is taking time.
Regards
SivaHi Markus,
This is the task log file.
1 ETP199X######################################
1 ETP182 CHECK WRITEABILITY OF BUFFERS
1 ETP101 transport order : "EDVK900773"
1 ETP102 system : "EDV"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "372.04.36" "700"
1 ETP198
4 ETP201 Check target systems buffer: "/usr/sap/trans/buffer/EDV"
3 ETP203 Buffer "/usr/sap/trans/buffer/EDV" is writeable
1 ETP182 CHECK WRITEABILITY OF BUFFERS
1 ETP110 end date and time : "20081112153053"
1 ETP111 exit code : "0"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP183 EXPORT PREPARATION
1 ETP101 transport order : "EDVK900773"
1 ETP102 system : "EDV"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "372.04.36" "700"
1 ETP198
2 EPU230XExecution of the export pre-processing methods for request "EDVK900773"
4 EPU111 on the application server: "sapdev"
4 EPU138 in client : "200"
2 EPU235XStart: Version creation of the objects of the request "EDVK900773"
3 EPU237 Version creation started as update request
2 EPU236 End: Version creation of the objects of the request "EDVK900773"
2 EPU231XStart: Adjusting the object directory for the objects of the request "EDVK900773"
2 EPU232 End: Adapting the object directory for the objects of the request "EDVK900773"
2 ETN085 "Adding component vector" " " " " " "
2 ETN085 "Finished." " " " " " "
1 ETP183 EXPORT PREPARATION
1 ETP110 end date and time : "20081112153058"
1 ETP111 exit code : "0"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP150 MAIN EXPORT
1 ETP101 transport order : "EDVK900773"
1 ETP102 system : "EDV"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "372.04.36" "700"
1 ETP198
4 ETW000 R3trans version 6.14 (release 700 - 28.07.08 - 15:52:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 12.11.2008 - 15:31:04
4 ETW000 control file: /usr/sap/trans/tmp/EDVKK900773.EDV
4 ETW000 > #pid 1564674 on sapdev (edvadm)
4 ETW000 > export
4 ETW000 > file='/usr/sap/trans/data/R900773.EDV'
4 ETW000 > client=200
4 ETW000 > buffersync=yes
4 ETW000 >
4 ETW000 > use comm 'EDVK900773'
4 ETW000 R3trans was called as follows: R3trans -w /usr/sap/trans/tmp/EDVE900773.EDV /usr/sap/trans/tmp/EDVKK900773.EDV
4 ETW000 Connected to DBMS = ORACLE --- dbs_ora_tnsname = 'EDV' --- SYSTEM = 'EDV'.
4 ETW690 COMMIT "0" "0"
4 ETW000 trace at level 1 opened for a given file pointer
4 ETW000
4 ETW000 ================== STEP 1 =====================
4 ETW000 date&time : 12.11.2008 - 15:31:04
4 ETW000 function : EXPORT
4 ETW000 data file : /usr/sap/trans/data/R900773.EDV
4 ETW000 buffersync : YES
4 ETW000 client : 200
4 ETW000 Syslog: k CQ3 : UMGSETTING& rscpexcc 12
4 ETW000 GetDBMigrateCodePagesLangs uses TCP0D, TCPDB, TCP0C.
4 ETW000 Language : ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789abcdi(),./:;& (ISO-ARHECSDEENFRELHUITJADAPLZFNLNOPTSKRUESTRFISVBGLTLVZ1SRZHTHKOROSLHRMSUKETAFISCASHIDZ2Z3Z4Z5Z6Z7Z8Z9)
4 ETW000 Compression : L
4 ETW000 l.s.m. : VECTOR
4 ETW000 commit : 100000
4 ETW000 table cache : dynamic
4 ETW000
3 ETW673XUse Commandfile "EDVK900773"
4 ETW000 /* HR_PA_Actions_Setup Actions (PA40) */
4 ETW000 trfunction: 'W' (customizing transport)
4 ETW000 trstatus : 'O'
4 ETW000 tarsystem : /ALL/
4 ETW000 user : RAHULD
4 ETW000 date : 12.11.2008 - 15:30:53
4 ETW000 1 entry from E070 exported (EDVK900773 ).
4 ETW000 2 entries from E071 exported (EDVK900773 *).
4 ETW000 22 entries from E071K exported (EDVK900773 *).
4 ETW000 5 entries from E071KF exported (EDVK900773 *).
4 ETW000 1 entry from E070C exported (EDVK900773 ).
4 ETW000 108 entries from E070A exported (EDVK900773 *).
4 ETW000 0 entries from CTS_SERIAL exported (EDVK900773 *).
4 ETW000 1 entry from E07T exported (EDVK900773 *).
3 ETW678Xstart export of "R3TRTABUT529A" ...
4 ETW000 0 entries from STABULOG exported (TABUT529A *).
4 ETW000 1 entry from T529A exported (200CO).
4 ETW000 1 entry from T529A exported (200DE).
4 ETW000 1 entry from T529A exported (200DH).
4 ETW000 1 entry from T529A exported (200EX).
4 ETW000 1 entry from T529A exported (200HA).
4 ETW000 1 entry from T529A exported (200IP).
4 ETW000 1 entry from T529A exported (200PR).
4 ETW000 1 entry from T529A exported (200RE).
4 ETW000 1 entry from T529A exported (200SE).
4 ETW000 1 entry from T529A exported (200SU).
4 ETW000 1 entry from T529A exported (200TR).
4 ETW000 1 entry from T529T exported (200ECO).
4 ETW000 1 entry from T529T exported (200EDE).
4 ETW000 1 entry from T529T exported (200EDH).
4 ETW000 1 entry from T529T exported (200EEX).
4 ETW000 1 entry from T529T exported (200EHA).
4 ETW000 1 entry from T529T exported (200EIP).
4 ETW000 1 entry from T529T exported (200EPR).
4 ETW000 1 entry from T529T exported (200ERE).
4 ETW000 1 entry from T529T exported (200ESE).
4 ETW000 1 entry from T529T exported (200ESU).
4 ETW000 1 entry from T529T exported (200ETR).
4 ETW679 end export of "R3TRTABUT529A".
4 ETW000 EDVK900773 touched.
4 ETW000 EDVK900773 released.
4 ETW000 4837 bytes written.
4 ETW000 Transport overhead 30.5 %.
4 ETW000 Data compressed to 8.5 %.
4 ETW000 Duration: 0 sec (4837 bytes/sec).
4 ETW000 0 tables in P-buffer synchronized.
4 ETW000 0 tables in R-buffer synchronized.
4 ETW690 COMMIT "512" "512"
4 ETW000
4 ETW000 Summary:
4 ETW000
4 ETW000 1 COMML exported
4 ETW000 1 COMMT exported
4 ETW000 2 DELETE commands exported
4 ETW000 Totally 22 tabentries exported
4 ETW000
4 ETW000 [dev trc ,00000] Disconnecting from ALL connections: 496153 0.496153
4 ETW000 [dev trc ,00000] Disconnecting from connection 0 ... 67 0.496220
4 ETW000 [dev trc ,00000] Closing user session (con_hdl=0,svchp=0x11102c7f8,usrhp=0x111018fc0)
4 ETW000 1330 0.497550
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x11102c7f8,srvhp=0x11102ca18)
4 ETW000 861 0.498411
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 2036 0.500447
4 ETW000 [dev trc ,00000] Disconnected from connection 0 56 0.500503
4 ETW000 [dev trc ,00000] statistics db_con_commit (com_total=2, com_tx=2)
4 ETW000 323 0.500826
4 ETW000 [dev trc ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)
4 ETW000 75 0.500901
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0000).
4 ETW000 date&time: 12.11.2008 - 15:31:04
1 ETP150 MAIN EXPORT
1 ETP110 end date and time : "20081112153104"
1 ETP111 exit code : "0"
1 ETP199 ######################################
Regards
Siva -
Transport Error: Request in "Release Started" state
Hi all,
I released a request & the release was cancelled due to some issues. Sub-tasks of the request is released but the main request is still in Release Started state.
Now I am not able to assign the objects contained in that request into a new request. The system displays a msg " Object locked by a request in with Release Started state".
Is there a way to unlock these objects from this request?
The system is not letting me to delete this request as well.
Points will be awarded for helpful replies.
Thanks!Dear Meera Murali,
If the object is locked by another requets,
Go to Se09.
Check in the released or modifiable requests in the Request Status Tab,and click on the Display button,
Now see the request that is locking ur Objects. select it and thin the menu bar,,,beside the recycle bin,,u will find the CHANGE OWNER button in the form of double arrow...and that will change the owner to ur ID.now u delete that request,,
Hope this helps u,,
Assign points if needful...
Best Regards,
VVenkat... -
MEssage when Transport request is released
Hello,
I want to get a message, when a transport request is released. But this throws no Event (Object CTREQUEST ) .
Is there any possibility ?
Thanks and best regards
StefanieHi Stefanie,
Go to SE24 and open the class CL_EXITHANDLER, in the method get_instance, put a breakpoint on the statement
CALL METHOD cl_exithandler=>get_class_name_by_interface
Line 14 and release your request and see if the BADI CTS_EXPORT_FEEDBACK is called.
I cannot check this in my system as i don't have any request to release.
Regards
Rajvansh -
Ifference between change request and release request and transport request
what is the difference between change request and release request and transport request and customization request?
Please refer to this link :
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Regards,
Praveen
Pl reward if helpful -
Plug-in request to release memory in Photoshop
Photoshop has never released memory. I read about 10 discussions about it, with entertaining side-steps to virus scanners and video drivers, and it all comes down to the same thing. Photoshop does not release memory. As Adobe knows this since a couple versions back and never patched or updated it in a new release, it would therefore be great if some company could pick up the task to write a plug-in for this. Almost every serious Photoshop user will buy that plugin as the only other option is to buy more memory.
Just a little illustration for newcomers what the problem is. Here's what Photoshop uses according to the task manager:
start Photoshop -> 110mb
open a 2.65gb psb -> 7975mb
close the 2.65gb psb -> still 7975mb
open a different 2.07gb psb -> 10106mb and any edit goes tedious slow because it is partly scratching because it did not release the memory when closing the 2.65gb file. The only solution was that I had to restart Photoshop after I closed the first psb. This is by the way with 16gb ram on win 7 64, where photoshop is assigned 10gb (67%).
The same thing happens if you Automate a Batch because with every opened file the memory never is given back until Photoshop ends up on the scratch disc slowing down to about one third the original speed if it isn't slower.
Anyway, I really hope there are some talented coders out there, using Photoshop, who would want to developer a plug-in. I have 16gb ram in my computer and the only program that uses that is Photoshop. I would have never upgraded my ram if Photoshop released memory.Why do you think it needs to work differently than it does? What specific problem are you having?
If you want the best possible Photoshop performance, having it allocate then reuse its own memory (without deallocation) is more efficient than returning it to the operating system, then requesting it again later. It doesn't sound right at first, but the Adobe engineer Chris Cox has said that they've explicitly tried it the other way and it just doesn't work as well. Your basic assumption (that Photoshop is doing something wrong) is simply flawed.
Now, if you need your system to be doing a number of RAM-intensive things at the same time, including Photoshop, you have to outfit it with sufficient RAM that it can work with Photoshop using all that you have allowed (in the Performance preferences) PLUS the other RAM usage you anticipate. In reality, few folks use multiple applications simultaneously that are all RAM-intensive, and those who do simply buy huge amounts of it. I personally outfitted my system with 48GB and it's never starved for RAM (and I do multitask a lot).
There's little hope for a plug-in that will cause Photoshop to release all of its RAM. The only way I know of for a plug-in to affect Photoshop's memory usage, and that is to provide a large (up to 2GB because it's a signed 32 bit field) estimate of how much RAM a plug-in will need in the gFilterRecord->bufferSpace field. That field is 32 bits no matter whether the 32 bit or 64 bit Photoshop is running, so the most a plug-in could possibly ask Photoshop to release (indirectly) is 2GB.
-Noel -
Change the status of the request from Released to un released.
Dear all
Some requests were created with no target system and were released.
these requests are to be transported to our Production System.
Is there any other way to transport these requests?
things I tried.
1. I tried to find the files in Cofile and datafile but could not find in trans folder.
2. tried to add the objects to new requests but facing problem while adding the key to the request.
Regards
MaheshHi,
you have created the requests as local requests, it means you haven't mentioned Target system it will be treated as local requests so it wont create Cofiles and Datafiles.
and you can use the option Transport of copies and check. actually u can't change the request from the Rleased to Unreleased.
you have to create new request that's the only way if your not able to copy the objects to the new request or if the transport of copies wont work.
-Srinivas.korva -
Identify the transport request for released Objects from BW(any BW Object)
Hi
How do i identify the transport request in which i have collected the BW Object(Say Transfer rule) which got released to the testing system.
Please guide me.
Thanks,
SatyaHi Satya,
Just follow these steps,
1)Go to the Update Rule and Double click on the Rule.
2)Click on Extras->Object Directory Entery>In hte Heading u can c Object.
3)This Objectr has Detials>R3TRUPDR-->Tech Name of Update Rule
4)Come to SE03
5)Come to Eiight Row-8 and Enter UPDR in the 3 Column adn the Tech Name in the 4 Column,TICK it and Execute
Now it will display when and all it gpot transported.
Similarly u can do it for Objects like MPRO for Multiprovider,ODSO for DSO,ETC
Rgds
SVU123
Edited by: svu123 on Dec 10, 2009 12:05 PM -
Credit memo request auto release
Hi all,
In the billing cours, it is mentioned that u201CIf the value of the credit memo request is below a certain minimum limit, then it can be released automatically by the system.u201D
Does anyine know hw to configure this?
Thanks
Mostafahello again.
you can define document classes in IMG > SD > Basic Funcs > Cred Mgmt/Risk Mgmt Settings > Maintain Authorizations.
under this tree, you will find Define Document Value Classes, Maintain Document Value Classes and Maintain Authorizations.
you can define document value classes, then assign values to the document value classes. example would be:
1) document value class: Z01; document value: $10,000.00
2) document value class: Z02; document value: $50,000.00
you then assign this to the user profile using PFCG. look under object T-ED01014500. specify the activity (create, change, display, etc.) and the document value class (maybe Z01 for user AA1, Z02 for user BB2).
now AA1 can only process sales documents with value up to $10,000.00. if the maximum value for auto release is 10,000.00, then no further release is necessary for AA1. however, the downside is that AA1 cannot process documents with value above this value, which throws the burden to BB2.
BB2, meanwhile, who is authorized to release orders up to 50,000.00 can process amounts higher than 10,000.00 up to 50,000.00. again, no further action is necessary.
hope this was helpful.
regards. -
How to delete transport request if child request was released
Hi,
By mistake i released child request but not parent request, but i want to delete whole transport request. it is not allowing to delete it, because child request as releaed.
Thanks,
Subbu.Not good news..check the below link, it says you cannot delete it but maybe you can get an idea..
Deleting a transport request
Delete Transport Request
A similar case..
Re: How to delete the Transport Request release from SE09 -
Transport request create release & export
Hai,
If we configure in SPRO popup is coming to enter the domain and all.
if we go for option create, system creates a new TPR.
Can any one guide me how to release and transport from a functional consultatnt point of view.Hi
<b>Functional Part</b>
Tcode : SE09
Check for your user name and then press <b>"Display"</b> button. You will get the list of TPR created. Here you <b>release the child request first and then the parent request</b>.
Basis consultants do the rest in <b>STMS</b> and then import the changes into the Target Client through <b>SE10.</b>
Pls Revert and Reward.
Regards
Vijay -
[request] wine 0.9.51
I don't know if this is the correct place to post this but ...
Ive been having problems with the 0.9.50 version of wine which is currently in the extra repo.
Steam doesn't seem to work, so today i quickly tested the 0.9.51 version which i made myself and everything is working fine again.
I know it has been flagged as out of date, but i just wanted to know if there are any plans to update it anytime soon?
Or if its just me with the 0.9.50 problem with steam.
Kane[vEX] wrote:If you search the forums you should be able to find instructions on how to update yourself it using abs/makepkg.
yeah i made myself a new pkg using the old pkgbuild, and its all working.
I was just wondering if there was going to be an update to the package in extra anytime soon so that there will be an official package available (the package i made was a quick and dirty one, i didnt check to see if there were any different config options etc that might need updating)
Thanks
Kane -
[request] Wine with DX9 patches
Can someone please, make a PKGBUILD for wine 0.9.52 with DX 9 Patches,
Thanks in advanceI made a PKGBUILD for wine 0.9.52, but i still don't know if it includes the direct x patches
#canistra [email protected]
_pkgsourcename=wine
pkgname=wine
pkgver=0.9.52
pkgrel=1
pkgrel32=1
pkgdesc="Interperenter for the Windows 3.x and Win32 APIs"
arch=('i686')
url="http://www.winehq.com/"
license=('LGPL')
depends=('freetype2' 'fontconfig' 'libjpeg' 'libungif' 'alsa-lib' 'glut' 'libldap' 'libxslt' 'lcms' 'libxxf86dga'
'freeglut' 'libxinerama' 'libxcursor' 'libxrandr' 'libxrender' 'libxdamage' )
provides=('wine')
conflicts=('wine')
install=()
source=(http://easynews.dl.sourceforge.net/sourceforge/wine/wine-$pkgver.tar.bz2)
#md5sums=('b0fd553e2f11fe7553ac1717797befe6' 'f9a03e920ae59c9cb1d7f7175e9f7755')
build() {
cd $startdir/src/$pkgname-$pkgver
./configure --prefix=/usr --sysconfdir=/etc --enable-opengl --with-x
make depend || return 1
make || return 1
make prefix=$startdir/pkg/usr install || return 1
# expand conflicts with textutils ( doesn't exist anymore ? )
# mv $startdir/pkg/usr/bin/expand $startdir/pkg/usr/bin/wine-expand || return 1
mkdir -p $startdir/pkg/etc/wine
# mkdir -p $startdir/pkg/etc/profile.d
# cp -r $startdir/src/$pkgname-$pkgver/documentation/samples $startdir/pkg/etc/wine -
[Request] Wine 0.9.39?
Hello!
I would like to know if we could have Wine 0.9.39 in the repositories to replace the 0.9.38 version?
How long does it normally take to have the latest Wine in the repositories?
ThanksToday I made a personal repository that can be used by everyone and I packaged the latest wine.
The wine version in the official repository have some bugs that I resolved, I think
All fonts are compiled with my package...
The repository:
[elwario91]
Server = http://elwario91.zouig.org/archlinux/depot/pkgs
Current version: 0.9.39
It is possible that pacman installs the package of the official repository, to solve this:
pacman -S elwario91/wine
Or put my repository before the others but it's not the best solution
Please give feedback to know if it works
Last edited by elwario91 (2007-06-16 15:09:14)
Maybe you are looking for
-
External hard drive - Everything is gone
Yesterday I purchased a new external hard drive as my old one had been playing up... I managed to transfer some of my files over before the old one went a weird & wouldn't display any of my files. Now it's showing there's 320gig available, there was
-
Hi All, I have problem with smartform printing my scenario is I have two pages in my smartform I want to print only second page based on condition if condition is satisfied I want to print second page only. my first page have main window and seco
-
hi guys, just feeling confuse from all the read up notes on upgrading from 11.2.0.1 - 11.2.0.3. The part where it mention that on the target database, one have to: 1. download and install oracle 11g r2 in a new oracle home. and make sure there are no
-
Integration of KW TRainings courses in EP ContentManagement
Hi folks! Does anybody know if it is possible to make a link from EP to SAP Courses Content stored on a KW machine? As there is also a TRX running on the KW machine maybe it is possible to connect from portal with an iView to the KW-TREX? Any help wo
-
I have a MacBook Pro and my bookmarks and mail are all google so I relly need my Google toolbar as this new one is not compatible. Thanks, ruco