Required and disabled
I have address fields that are required and if the mailing is same as residence the mailing address fields
get disabled through a variable set in the backing bean. But In ADF, I am having trouble copying over
the data from the residential address to the mailing address when the box for mailing same as
residence is checked. Anybody have an idea on how to fix this?
Hi,
An Index
Following will helpful to resolve the issue
How to set the default value of selectOneChoice
Similar Messages
-
How to Enable and Disable column in Table Control.
Hi all,
I want to make certain column of Table control as Enable or Disable on Button action.
Enable means ready for input and Disable means not ready for input.
Please send me sample code.
Thanks in advance.Hi Vipin,
You have to loop through the table columns to set the properties in the PBO of your screen.
Here is the sample solution.
delcare a workarea for the columns in the table control in your top include.
Table Control .
CONTROLS: TAB1 TYPE TABLEVIEW USING SCREEN '0100'.
DATA: WA_COLS LIKE LINE OF TAB1-COLS.
in your screen
PROCESS BEFORE OUTPUT.
MODULE INTIALISE_100.
*& Module 0100_INTIALISE OUTPUT
MODULE INTIALISE_100 OUTPUT.
LOOP AT TAB1-COLS INTO WA_COLS.
WA_COLS-SCREEN-INPUT = 1.
MODIFY TAB1-COLS FROM WA_COLS TRANSPORTING SCREEN-INPUT.
ENDLOOP.
ENDMODULE. " 0100_INTIALISE OUTPUT
modify the screen-input property as required for the table control columns.
Please provide points if helpfull.....
Thanks,
Karthik
Message was edited by: Karthik
Karthikeyan K -
the 3d features require 'use graphics processor' is enabled in the performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly
Hello I'm also getting this error.. can anybody help me out? Here's my log.
Adobe Photoshop Version: 2014.0.0 20140508.r.58 2014/05/08:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2128 MHz
Built-in memory: 2934 MB
Free memory: 231 MB
Memory available to Photoshop: 2354 MB
Memory used by Photoshop: 70 %
3D Multitone Printing: Disabled.
Touch Gestures: Disabled.
Windows 2x UI: Disabled.
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
glgpu[0].GLVersion="2.1"
glgpu[0].GLMemoryMB=1242
glgpu[0].GLName="Intel(R) HD Graphics"
glgpu[0].GLVendor="Intel"
glgpu[0].GLVendorID=32902
glgpu[0].GLDriverVersion="8.15.10.2993"
glgpu[0].GLRectTextureSize=8192
glgpu[0].GLRenderer="Intel(R) HD Graphics"
glgpu[0].GLRendererID=70
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32"
glgpu[0].GLDriverDate="20130130000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.20 - Intel Build 8.15.10.2993"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447 ]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[512]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[1024]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[41]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
License Type: Tryout Version
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\ANNABE~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 298.0G, 63.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/04/14-23:42:44 79.554120 79.554120
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/04/23-10:46:55 79.554276 79.554276
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 2014/03/05-14:49:37 5.0.33 79.552883
AdobePDFL.dll PDFL 2014/03/04-00:39:42 79.510482 79.510482
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPFiles.dll Adobe XMP Files 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPScript.dll Adobe XMP Script 2014/01/13-19:44:00 79.155772 79.155772
adobe_caps.dll Adobe CAPS 8,0,0,7
AGM.dll AGM 2014/04/14-23:42:44 79.554120 79.554120
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib.dll AMTLib (64 Bit) 8.0.0.45 BuildVersion: 8.0; BuildDate: Fri Mar 28 2014 20:28:30) 1.000000
ARE.dll ARE 2014/04/14-23:42:44 79.554120 79.554120
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/04/14-23:42:44 79.554120 79.554120
BIBUtils.dll BIBUtils 2014/04/14-23:42:44 79.554120 79.554120
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/04/14-23:42:44 79.554120 79.554120
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
imslib.dll IMSLib DLL 7.0.0.145
JP2KLib.dll JP2KLib 2014/03/12-08:53:44 79.252744 79.252744
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/03/25-23:41:34 79.553444 79.553444
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.0
Plugin.dll Adobe Photoshop CC 2014 15.0
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.0.0.74
PSArt.dll Adobe Photoshop CC 2014 15.0
PSViews.dll Adobe Photoshop CC 2014 15.0
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 7.0.1.102
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 15.0 (2014.0.0 x001)
Accented Edges 15.0
Adaptive Wide Angle 15.0
Angled Strokes 15.0
Average 15.0 (2014.0.0 x001)
Bas Relief 15.0
BMP 15.0
Camera Raw 8.0
Camera Raw Filter 8.0
Chalk & Charcoal 15.0
Charcoal 15.0
Chrome 15.0
Cineon 15.0 (2014.0.0 x001)
Clouds 15.0 (2014.0.0 x001)
Collada 15.0 (2014.0.0 x001)
Color Halftone 15.0
Colored Pencil 15.0
CompuServe GIF 15.0
Conté Crayon 15.0
Craquelure 15.0
Crop and Straighten Photos 15.0 (2014.0.0 x001)
Crop and Straighten Photos Filter 15.0
Crosshatch 15.0
Crystallize 15.0
Cutout 15.0
Dark Strokes 15.0
De-Interlace 15.0
Dicom 15.0
Difference Clouds 15.0 (2014.0.0 x001)
Diffuse Glow 15.0
Displace 15.0
Dry Brush 15.0
Eazel Acquire 15.0 (2014.0.0 x001)
Embed Watermark 4.0
Entropy 15.0 (2014.0.0 x001)
Export Color Lookup NO VERSION
Extrude 15.0
FastCore Routines 15.0 (2014.0.0 x001)
Fibers 15.0
Film Grain 15.0
Filter Gallery 15.0
Flash 3D 15.0 (2014.0.0 x001)
Fresco 15.0
Glass 15.0
Glowing Edges 15.0
Google Earth 4 15.0 (2014.0.0 x001)
Grain 15.0
Graphic Pen 15.0
Halftone Pattern 15.0
HDRMergeUI 15.0
IFF Format 15.0
Ink Outlines 15.0
JPEG 2000 15.0
Kurtosis 15.0 (2014.0.0 x001)
Lens Blur 15.0
Lens Correction 15.0
Lens Flare 15.0
Liquify 15.0
Matlab Operation 15.0 (2014.0.0 x001)
Maximum 15.0 (2014.0.0 x001)
Mean 15.0 (2014.0.0 x001)
Measurement Core 15.0 (2014.0.0 x001)
Median 15.0 (2014.0.0 x001)
Mezzotint 15.0
Minimum 15.0 (2014.0.0 x001)
MMXCore Routines 15.0 (2014.0.0 x001)
Mosaic Tiles 15.0
Multiprocessor Support 15.0 (2014.0.0 x001)
Neon Glow 15.0
Note Paper 15.0
NTSC Colors 15.0 (2014.0.0 x001)
Ocean Ripple 15.0
OpenEXR 15.0
Paint Daubs 15.0
Palette Knife 15.0
Patchwork 15.0
Paths to Illustrator 15.0
PCX 15.0 (2014.0.0 x001)
Photocopy 15.0
Photoshop 3D Engine 15.0 (2014.0.0 x001)
Photoshop Touch 14.0
Picture Package Filter 15.0 (2014.0.0 x001)
Pinch 15.0
Pixar 15.0 (2014.0.0 x001)
Plaster 15.0
Plastic Wrap 15.0
PNG 15.0
Pointillize 15.0
Polar Coordinates 15.0
Portable Bit Map 15.0 (2014.0.0 x001)
Poster Edges 15.0
Radial Blur 15.0
Radiance 15.0 (2014.0.0 x001)
Range 15.0 (2014.0.0 x001)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.0
Ripple 15.0
Rough Pastels 15.0
Save for Web 15.0
ScriptingSupport 15.0
Shake Reduction 15.0
Shear 15.0
Skewness 15.0 (2014.0.0 x001)
Smart Blur 15.0
Smudge Stick 15.0
Solarize 15.0 (2014.0.0 x001)
Spatter 15.0
Spherize 15.0
Sponge 15.0
Sprayed Strokes 15.0
Stained Glass 15.0
Stamp 15.0
Standard Deviation 15.0 (2014.0.0 x001)
STL 15.0 (2014.0.0 x001)
Sumi-e 15.0
Summation 15.0 (2014.0.0 x001)
Targa 15.0
Texturizer 15.0
Tiles 15.0
Torn Edges 15.0
Twirl 15.0
Underpainting 15.0
Vanishing Point 15.0
Variance 15.0 (2014.0.0 x001)
Water Paper 15.0
Watercolor 15.0
Wave 15.0
Wavefront|OBJ 15.0 (2014.0.0 x001)
WIA Support 15.0 (2014.0.0 x001)
Wind 15.0
Wireless Bitmap 15.0 (2014.0.0 x001)
ZigZag 15.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Installed TWAIN devices: NONEWhat Intel video card do you have? The only Intel HD graphics cards officially supported by Photoshop CC are:
Intel HD Graphics P3000
Intel HD Graphics P4000
Intel(R) HD Graphics P4600/P4700
Intel HD Graphics 5000
Go here to read more about the requirements: Photoshop CC and CC 2014 GPU FAQ -
Automatic deletion of temp files and Disabling copy to option of originals in DMS
Dear DMS Experts,
I have 3 requirements, I have searched the net ,but I am still clueless as to how to do it.
1) The temporary files created in C;\temp ( or the path we have given in dc20 ) has to be deleted after viewing the documents because of security reasons.
I heard about enabling the OLE2 option in table TDWX, but I am not sure .
2) The 'copy to' option of originals has to be disabled in display mode ( CV03N ). Adding further, the 'save as' and 'print option' for MS Office applications ( word, excel ) has to be disabled due to security reasons( I tried with both office integration and %AUTO% )
3) In product browser view ( using folder structure in CV01N ), I need the users to have 'delete link as ' option disabled as they are not supposed to delete the folders created by admin ( Deleting means deleting from the structure and not from the system) . For this, I have given authorization object for bill of materials for the users and disabled 'delete' checkbox as well as 'Delete from database' checkbox . But still, I am able to delete the folders from the structure.
Any help would be appreciated.
Thanks in advance.
Regards,
AravindHi Chandu,
I am still in the dark regarding Q2 and Q3 . Regarding Q2, I tried disabling the check out options and also try opening it in SAP Script or smartform by populating the entries in the originals to the smartform. But still download option is possible. Hence I have raised to SAP service market place.
Regarding Q3 , I am trying to use custom authorization object .
Regards,
Aravind -
Copy control for dates and disable the input
Hi All,
I have the following problem: I'm trying to copy dates in a follow-up order from the source order (which works fine by implementing the CRM_COPY_BADY method DATES) and disable the input of the copied dates in the follow-up order (which doesn't work).
In the change-parameter CT_INPUT_FIELDS you can specify the fields which have to be copied and furthermore you can control the modifiability of the field in the follow-up order via the parameter CHANGEABLE (e.g. 'A' means field can not be changed). This technique is the same in all methods of the copy BADI.
Unfortunately it doesn't work for the dates. As I said already, the date is copied but can be changed by the user in the follow-up order.
Anybody an idea?
Thanks and best regards, LutzDear John,
Actually, I have tried with copy requirement 2.However, it works for copying a different customer with the same sales area as original. Yes, I may need to ask developer to solve my solution. But I would like to keep it to be the last choice. I tried to search "How to copy document between inter-company businees"; but the I still not get what my custome's want. Anyways, thank you very much for sharing idea. -
Selection screen dynamic enable and disable
HI all,
I have one requirement like
on selection of redio button my selection screen hould be enable and disable
Like if i select rediobutton tfile then my selection screen block B2 should enable and Block B3 hould be disable
If redio button selscr is selected then my block B3 should be enable and Block B2 should disable
my selection screen code is below
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-005.
PARAMETERS: tfile RADIOBUTTON GROUP g1 DEFAULT 'X'.
PARAMETERS: selscr RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_matnr FOR marc-matnr,
s_fkdat FOR vbrk-fkdat OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-002.
PARAMETERS : filename TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK b3.
How to do that.
Help me here its urgent tnx in advance.Hi Lalit,
Check the below code.
TABLES: marc, vbrk.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-005.
PARAMETERS: tfile RADIOBUTTON GROUP g1 DEFAULT 'X' USER-COMMAND rusr.
PARAMETERS: selscr RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_matnr FOR marc-matnr MODIF ID abc,
s_fkdat FOR vbrk-fkdat MODIF ID abc.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-002.
PARAMETERS : filename TYPE rlgrap-filename MODIF ID def.
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN OUTPUT.
*Note: To disable the fields use the below one.
LOOP AT SCREEN.
IF screen-group1 = 'DEF'. "Name field
IF selscr = 'X'.
screen-input = 1.
ELSE.
screen-input = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'ABC'. "Name field
IF selscr = 'X'.
screen-input = 0.
ELSE.
screen-input = 1.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
*Note: To hide the screen use the below one.
LOOP AT SCREEN.
IF screen-group1 = 'DEF'. "Name field
IF selscr = 'X'.
screen-active = 1.
ELSE.
screen-active = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'ABC'. "Name field
IF tfile = 'X'.
screen-active = 1.
ELSE.
screen-active = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP. -
IPhone 3GS blocked and disabled
Hi everyone
I got an iPhone 3GS but it's blocked and disabled, I don't know why it's blocked I just bought it like that because it was cheap, anyway I forgotten my password and now it's disabled, I can I get it working without losing any of my photo, music, apps ect..
I just really need to get my photos off it then I don't mind what i do with it after
PLEASE HELP ME!!Contact Orange and find out their requirements for removing the SIM lock.
Only the carrier to whom the device is locked can officially unlock it. -
I'm trying to connect to my work network from home, but Firefox automatically updated to Firefox 4 on my home computer and disabled my F5 software which was what I was using to remotely login to my work computer. F5 Networks VPN client is standard stuff issued by my Federal Government job to allow me to work from home.
Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
* http://kb.mozillazine.org/Lost_bookmarks -
Creating new BAT file script to stop, restart and disable S I agent
We have just installed BOXI3 and are in the process of updating some bat files for stopping, restarting and failover (to our backup servers)and disable services on the Central Configuration Manager. In my old scripts we called each service Examples (
sc
servername.net config "bobjspcengine" start= disabled
sc
servername.net config "BOBJWebiServer" start= disabled)
I have a few questions
1. Server Intelligence Agent... Where would I find it's name like the BOBJWebiServer example?
2. If my bat file stops this agent does that automatically stop the CMS, Webi, Report services?
3. This is for our support team in order to easliy stop Tomcat and other services for failing over to our DR sites and backups since the script automatically stops, starts, restarts disables and enable services..., is this the best approach? We put these bat files out on the servers and all they do is click on them to start the failover process.Try using
Process Monitor for looking the key.
For example, you may set the required value through the group policy and see what windows registry keys are changed. -
Hi gurus,
we are currently developing a routine that will check certain requirements before price will be calculated. Right now, the routine is suppressing the condition type when reqts are not met. since the condition type is a mandatory field, we are getting an error. is there a way wherein we can still display the condition type even if reqts are not met. im thinking condition type is displayed but grayed out. also, zero value should be the default value if reqt are not met. any idea?
thanks,
jpHi,
Thank you for your input. Business do not want to remove mandatory field. instead, what they want is that if reqt is not met, the condition type will be displayed but cannot be edited. also, value is set as zero. can i create one requirement to disable editing and then a routine that will set value at zero?
i noticed that in standard, when condition type does not have a condition record, system is suppressing condition type.
how can i code your statement: If the requirement is met, cond type is "Required" field, Else not a mdantory field
regards,
jp -
when a disabled user is re-enabled in OIM , it automatically re-enables all the users disabled objects . is there any way to customize or turn off this behaviour . i would like the reneabled users to get his resource objects freshly provisioned
Do you intend to provision multiple instances of the same resource to the user?
What I mean is, when you disable the user, all the resources get disabled. While when you re-enable it, if you re-provision the resources, users would have 2 resources one which is disabled and other which is provisioned. We had a similar requirement and in our case we Revoked the resources when the user was disabled and users would re-request for those resources once user is re-enabled.
Additionally, if you want multiple instances of the same resource to the user with multiple instances in the disabled state (number of times you disable the user) and one in provisioned, you need to modify the Enable User task not to e-enable anything. In the same time you need to have a custom code which raises a request to provision the user with the resource (if you have approval) or provision directly.
Hope it helps!
Rgds, Ajay -
Probook 640 bios - Enable Intel VT-x and disable trusted execution for VMWare
With the Probook 640, can someone please explain, step by step, how I would make the proper settings in the bios for VMWare virtualization? I need to enable Intel VT-x and disable trusted execution.Thank you.
randallto wrote:
There was another setting in bois I found that required scrolling in the bios screen. Tricky to find with no mouse.
I am not sure if some day these terminologies can be standardized so someone can follow very specific instructions rather than vague instructions that are further obfuscated with the use of technical acronyms.
That is the problem, that error message in VM is not explicit enough as to what steps to take to correct the problem. These bois screen authors decide arbitrarily to name settings as it relates to their world personally and there are not standards.
I still don't know how that got changed in the first place but that is not an issue with VM ware as to what else is changing the setting.
Do you have any explicit suggestions as to how the error message can be improved? -
SCUP flash updates show up as 0 required and 0 installed although they are needed
We have a problem in sccm2012\software updates. We have imported Flash, Acrobat and Reader updates from SCUP 2011.
Reader updates works perfectly and are shown with "Required" and "Installed" numbers, but when it comes to Flash and Acrobat it says 0 for both. The only thing that shows is "Percent Compliant".
I have modified the detection rules to go for files instead of registry settings but it doesnt make a difference
Tried Google until my eyes bleed without finding anything like this.
Is there anyone out there that has a clue what the problem is???
The only thing else i could come up with is certificate problem but then shouldnt Reader updates work....
Regards ThomasIt shows 65% for ActiveX and 79% for plugin and there is no chance that so many have that version (223).
I havent distributed it as a packet yet because i wanted it to work with SCUP and automatic update is disabled via mms.cfg
I tried to run some reports to see the actual figures and it turned out that the reports are blank for software. I dont get any results at all. For other than Software it works fine.
So now i have to start to see what the problem is with software reporting........ -
Difference between 'Always Refresh' and 'Disable Cache Hits'
We are using clustered application servers with its own cache. We are not doing any cache synchronization. So, for selective objects we should ensure that cache is not returning stale objects.
I see two options in MWB for refreshing and disabling the cache. Can somebody explain the difference between these two and recommend what I should do to address my problem.
Thanks in advance.These are similar and often used together settings:
'Disable Cache Hits'
Is used by TopLink when a ReadObjectQuery is executed with only the PK fields. By default TopLink will short-circuit going to the database and try to find the object in the cache first. This includes 1:1 mapping queries. Turning this on will cause TopLink to go to the database instead of the cache in these cases.
'Always Refresh'
Is used to tell TopLink how to handle the results returned from a query against the database. By default TopLink will trust the cached version of any instances already cached. When this is enabled, or the refreshIdentityMapResult is turned on for a specific query the results of the query are used to refresh the values of the cached version.
The trick with always-refresh is that it does not force all queries to go to the database. It simply forces all returned rows to refresh cached instances.
These are often selected by customers who never want to trust a cached instance. They are typically used together to get that effect. This configuration will get minimal performance gain from the cache but still require the cache for object-identity (avoid duplicate instances).
Be careful though because these will have the effect for EVERY query and mapping traversal. I typically prefer to manually turn this on for my specific queries where I need to get the latest version from the database versus turning it on for all queries.
On the query the methods you will be interested in are:
query.refreshIdentityMapResult()
This will force the query to the database and have the results refresh the cached instance if it already exists.
One setting that is of definite interest is
descriptor.onlyRefreshIfNewerVersion();
This must be used in conjunction with the above query refresh and optimistic locking but it will avoid additional unecessary steps if the row has not changed since the cached version was read.
Doug -
Difference between Switch -off and disable of an aggregate.
Hi All,
Can any one please tell me whats the difference between Switch-off and Disable an aggregate?
Appreciate ur help.
Thanks,
Soumya.Hi,
You can temporarily switch off an aggregate to check if you need to use it. An aggregate that is switched off is not used when a query is executed.
To do this select the relevant aggregate and choose This graphic is explained in the accompanying text Switch On/Off. An aggregate that is switched off is marked in column Filled/Switched off with This graphic is explained in the accompanying text.
Since aggregates that are switched off must also be consistent, you do not have to activate the aggregate again or to fill it when you switch it back on.
Execute a query or trace that would use the aggregate that was switched off. Compare the time that the database needs with the time that the query needs when using the aggregate. If the query is not significantly slower without the aggregate, you can deactivate or delete the aggregate.
The system deletes all the data and database tables of an aggregate. The definition of the aggregate is not deleted.
Deactivation
Select the required aggregate and choose This graphic is explained in the accompanying text Deactivate.
The status display in the columns Status and Filled/switched off change back to This graphic is explained in the accompanying text.
If you want to, you can activate and fill the aggregate again later.
More information:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
Hope it helps.
Regards,
Ray
Maybe you are looking for
-
System heat up and frame rate reduces to 5 fps approx. while playing FIFA 12
The game works very well in first 2 minutes of startup but after that the fan speed increses abnormally and hard disk also heats up. this is followed by reduced frame rate about 5 fps which makes it very difficult to play the game. While this problem
-
Help with creating a custom component.
Hi. I have created a really simple custom component called myComp. It is a simple Canvas 100 pixels x 100 pixels with an Image control component. <mx:Canvas> <mx:Image id="image1"> </mx:Canvas> After instantiating the component in Main.mxml eg. var p
-
Errors during deploying EJB app
Hello all, I am trying the develop an EJB app in eclipse juno with weblogic 9.1. I have installed the oracle tools and weblogic has been configured with the EJB project in eclipse. When I start weblogic from the servers tab within eclipse the followi
-
OAException: Message Name: SECURITY_APPL_SERVER_ID
Hi, I have some problems to connect to one of ours Applications servers. We have three development OA servers (11.5.10) installed here: I have already succeeded in using my JDevOAF with two of them, but I can't manage to use the third from JDev. I ha
-
Balancing iPhoto and Picasa...or do I even need Picasa?
I use iPhoto for business purposes, taking pictures of all the items I make as a handcrafted jewelry designer. Only use my Coolpix 4500 for this purpose. Recently received a Kodak which I am using for personal picts. What I would LIKE to do is have b