Required help on setting up blaze DS.

Hi,
Required help on setting up blaze DS.
I have Blex builder 3 and Blaze DS turnkey version.
Would any one help me in setting up the java application on Blaze DS.
Do i require to place Blaze DS and flex(client code) on same system.
As of now i have Blaze DS on my local system and Flex on one of test server.
Thanks in advance
Regards,
Anil

Thanks, one question, i have downloded Blaze DS turnkey version, could not srtart tomcat which is in Blaze DS.
Hence making use of tomcat installed on my local system which is works fine. In order to settup Blaze DS i copied required jar files from Blaze DS and flex configuration files(xml files) .
However Flex Builder3 is installed on one of test server, when i tried to create Flex project i could not validate Server location.
Is it required to have both Java server and flex builder on same system?

Similar Messages

Required help in setting sqlplus environment

Hi,
I want some hint regarding settigns of sqlplus environment.
Following is script i run using unix .
--------------------------------------------------test.sql-----------------
set serveroutput on
set feedback off
DECLARE
min_id NUMBER:=&1;
max_id NUMBER :=&2;
student_id NUMBER := &3;
BEGIN
DBMS_OUTPUT.PUT_LINE('some usefull command');
END;
EXIT;
-------------------------------------End test.sql-------------------------------
I use following command to run this script.
sqlplus -s user/password@database @test.sql 10001 20000 5 > out.log
After running this command i get following output in out.log
old 3: min_id NUMBER:=&1;
new 3: min_id NUMBER:=10001;
old 4: max_id NUMBER :=&2;
new 4: max_id NUMBER :=20000;
old 5: student_id NUMBER := &3;
new 5: student_id NUMBER :=5;
'some usefull command'
My doubt is is there any way to suppress the junk created by sqlplus.
How to avoid following statement to be written in output.
old 3: min_id NUMBER:=&1;
new 3: min_id NUMBER:=10001;
old 4: max_id NUMBER :=&2;
new 4: max_id NUMBER :=20000;
old 5: student_id NUMBER := &3;
new 5: student_id NUMBER :=5;
Thanks
Rajiv

I am not sure what the intent of this is, or in what version you intend to utilize it, but this doesn't make any sense: At least as it is written.
The SQL*Plus environment should be set in glogin.sql and login.sql.
What you've posted, by way of examples, looks like schoolwork. Perhaps you can clarify if using the proper configuration files does not do what you want.

Require help with setting up MFA for On-premises RD Gateway

I've been unable to setup up MFA correctly. The only step by step guide I was able to find was: http://www.rdsgurus.com/uncategorized/step-by-step-using-windows-server-2012-r2-rd-gateway-with-azure-multifactor-authentication/
I've tested this on a single server just as the guide, without succes. I now have 4 seperate servers:
1. GW server (which is also the DC)
2. NPS server
3. MFA server
4. RDS server
I'm not exactly sure what radius client, server and target to point to what. Could someone help me understand the sequence?
Much obliged!

RD Gateway uses NPS by default. RD Gateway uses its local NPS to send the RADIUS request to the MFA Server. The MFA Server typically proxies the RADIUS request back to NPS running on that same server. NPS validates the username/password with AD and returns
the Access Accept to the MFA Server. The MFA Server performs MFA and returns the Access Accept/Reject to RD Gateway. So you don't necessarily need a separate NPS Server. You just need the RD Gateway Server and the MFA Server in addition to your domain controllers.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

I require help with my first website

As you can see from many of my recent posts, I am new to web development, and I have decided that I am going to need some help.
This forum has been a huge help, and I will continue using it, but the reality of the situation is that progress is slow as I am learning as I go, each junction I reach and require help with is holding up progress, which wouldn't be a problem if I had more spare time, but I simply don't.
Is anybody willing to help me? It would be paid work so I would need to discuss how this would work with rates etc... here are some details:
The domain is already setup, and you can see the first page I have been working on here: http://www.elliotnewman.com/index/test7.html
The closet website I can find for your reference is: http://www.jaspaljandu.com/home/
My site will initially not be quite as established as Jaspal's, but in essence the functionality will be similar. The things I know of that I will need help on are:
Setting up the ordering and payment process when a customer wants to order a print, including automated email notifications, and check out forms ( this may also require membership fields or maybe through paypal)
Setting up the interactive framing graphics - ref - http://www.markgray.com.au/gallery/limited-edition-prints/forgotten-island.php
Potentially helping to setup a blog
Work with me on integration - and updates (ie build the all the templates needed so updates and new images can be posted by myself easily)
Automation of the counts of the limited editions
Setting up links to Facebook, twitter, linkedin etc
Reviewing and testing any code that I create
Along with these points I will also need standby help with the code I am directly working on, so file sharing may have to be setup. It is also worth noting that I will supply all the graphics and the design elements for every page, I will also be very specific with briefs as I know exactly what I want to achieve.
If anybody is interested please send me a private message, I would need to see some examples of your experience, details on your availability and your rate - whether thats per day, per hour and a rough estimate on how long you think the work will take.
Also, if anybody knows somebody outside this forum that you think could help me then please also forward this on.
Apologies if this is not the best place to post this.
Elliot.

Hi
In addition to Nancy s comments, reading the following line -
Along with these points I will also need standby help with the code I am
directly working on, so file sharing may have to be setup.
What you are basically after is a tutor, to guide you in what you are doing. In this respect it may be worth your while to read-up on designing web pages,as after a quick glance of the code, (from your previous post regarding the background image ) the main problem you are having is that you are not 'implementing' a consistent design/development procedure.
Try reading the following -
General tutorials on html, css, etc - http://www.w3schools.com/.
Design of web site, general - http://articles.sitepoint.com/article/principles-beautiful-web-design.
PZ
www.pziecina.com

Getting help for setting up a "good" network

Hi all,
I've been "managing" our network and doing the IT stuff even though I'm not a "true" IT guy, just a graphic artist dabbling in the stuff. I want to get some help on moving our multiple public IP address network to a more secure single Public IP address. I don't know where I can get that help so I'm taking my chances here even though this is not specific to Apple server.
Here's the equipment we have:
Apple Extreme dual band
Apple Server 10.6.3 for file services, iCal, iChat, DNS, Open directory, Address book, Web.
FTP server using CrushFTP on a Mac Pro running 10.6.3
Two ADSL modem from same ISP, one 16 Mbps the other 10 Mbps
a Peplink Balance 310 for load balancing the traffic (and it's not working as advertised as far as I could configure it.
30 static IP addresses hooked to the 16Mbps modem/router
a gigabit switch ASANTE Intracore IC36240
a 100 mbs switch ASANTE intracore 3524
I'd also like to be able to log into any machine remotely with ARD. Right now, it's a peace of cake with everyone having it's own public IP address, but how will I make this work with DHCP? I'd also like to be able to have VPN enabled.
I have no idea how to make the best of this equipment so if you have any insight or know where I can get some help to set that up, that'd be great!

There are as many 'good' networks as there are network requirements and hardware combinations.
Get a server-grade firewall, if that peplink router can't provide that function.
Figure out what's up with the peplink router.
If the peplink isn't working and if it doesn't have firewall capabilities (I've not read the specs), I'd replace it with a firewall with dual uplinks.
Once you get DHCP going, you'll have two IP subnets, and you'll have to set up subnet routing for your gear. Other than that (and with that external server-grade firewall), the remote connections are straightforward.
The server-grade firewall should have VPN end-point servers for pptp and l2tp, and probably ssl, and probably a DMZ. RADIUS support, likely. For this case, dual uplinks and support for running both.
Stay out of 192.168.0.0/16 for your private stuff.
I'd likely set up the public static IP for the router, the DMZ, and key stuff that needs to be public facing. I might well run the rest of the stuff in a private IP block.
None of which involves Mac OS X.

HT201209 Hey guy I need to help please set balance my app id = 0

I need to change location my id but I can't make because I have point
In store please help me set my point app id to null thk
<Subject Edited by Host>

You will need to Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I took my iMac to be fixed and when i got it back, mail was not set up. I called Apple Support and they helped me set up mail. Then the emails went to trash on the iMac and on the MacBook Pro (same emails). There are no numbers by the 'inbox' to tell how

I took my iMac to be fixed and when I got it back, mail was not set, so I called Apple and they helped me set up mail. Now the new mail goes to trash and there is no number by the 'inbox' to tell me how many new messages I have. I cannot save a draft to 'drafts.' There is a large number by 'trash' (I think all mail went to trash - including drafts). When I send myself an emai, it goes to trash also. This is on both my iMac (the one taken in) and my MacBook Pro (same emails) which was not taken in.
I went to 'rules' but have no idea what to do there. There are no rules in the rule box. When I click 'add rule' it puts 'rule 1' in the rule box, but since that was not there when I took it in, I delete it to have an empty rule box.
Can someone pleasehelp me. I am completely stupid with all this. Do not under stand what is suppose to be set up in 'rules.'
Thank you so much,
Arudi

Now new mail is coming to both computer's inboxes but there is no number on the stamp icon on dock to show number of emails on the iMac. Nor is there a number by either email address under MAILBOXES/inbox (sidebar) on the iMac. This number is showing on MacBook Pro.
I also can save drafts now on both computers.
Seems the Pro is fixed and the iMac is only missing the numbers on dock icon and by addresses in inbox.
Now that the problem is less, I feel i am wasting your time but will continue so maybe I can get those numbers back.
Two emails > AT&T email and gmail.
Apple's Mail program for email - yes, and gmail.
IMAP for both accounts.
Did not change mail configuration on MacBook.
The iMac and MacBook Pro have the same mail configuration except in Accounts/mailbox behaviours/store draft messages on the server was not marked on MacBook > it is now.
'Store junk messages on the server' was marked on one computer for gmail, but is unmarked on both now.
On the iMac, Accounts/Accounts info/Outgoing mail for gmail is smtpgmail.
On the MacBook Pro for gmail it is smpt.gmail.com (plus) my email address.
Rules/Add rule window, on the MacBook third line is 'Any Recipient', on the iMac third line is 'From."
The last box on that line has my email address on the MacBook.
The last box on that line has the last address I sent an emil to (last night), on the iMac.
On the last line on iMac, no box was selicted for 'to mailbox' > I choose 'inbox' because it is on the MacBook Pro.
Now I have a Rule #1 and am not sure I should have because there was no rules marked when I took the computer in.
Thank you. I relized I had done the labeling wrong when so much of my question appeared twice and no one else's did. I know how to do it now.
Thank you so much,
Arudi

Help needed setting up print server

i got 2 printer:
1 usb inkjet epson 1290
1 hp5100 network
i have 1 server:
serving epson for our col proof using powerripx as driver and shared via os x print server
i have 2 network interface card on the server.
my problem is: the position of the server in the office has only one network interface port, i want to have my HP connected to the 2nd network interface of the server and the server connected to the only available network point there and thus have the server serving both printer.
have set up the en1 interface, enable NAT, dhcp, firewall, but the server itself does not recognised the hp which is connected to the 2nd ethernet interface. when i move it on top of the ethernet list in system preferences it does recegnised it but the the whole print server is not accessible on the network.
can someone with more experience help me set this up.
thx

I didn't say it's impossible. I just offered an easy solution to your problem that will save you and you users some hassle in the long run (eg. when you come to troubleshoot you wn;t have to look at 2 networks and a firewall). I guess I just like easy solutions. And ,dude, 20 bucks...
If you want to go the hard(er) way you need to:
1. set up a second network address range on the second card
2. give the printer a fixed IP address within that range
3. ensure firewall is not blocking packets from/to the printer
4. config the printer on your print server & clients
hth,
b.

TS3276 Help in setting Apple Mail to receive and send mail via Yahoo mail service

I would appreciate help in setting up Apple Mail to receive and send e-mails via Yahoo. Thank you

Sorry,
Have you tried the connection doctor? In Mail menu bar under Window connection doctor, this will usually let you know where the problem might be.
http://support.apple.com/kb/TS3276 Read thru this as well.

Will someone please help me set-up Acrobat to send a PDF via webmail? Acrobat returns a message "Server Connection Error .... Port 143 unavailable"

Will someone please help me set-up Acrobat to send a PDF via webmail? Acrobat returns a message "Server Connection Error .... Port 143 unavailable"

Are you using a Microsoft or Apache web server? If so, you can submit to a server-side script, which will bypass web mail and client-side email software such as OUTLOOK.
For examples:
http://www.nk-inc.com/software/pdfemail.net/examples/

Required help for a query

Hi All....
Required help for one more query.
I have a table with data like this:
Cust_id Transaction_no
111 1
111 2
111 3
111 4
111 5
111 6
222 7
222 8
333 9
333 10
333 11
333 12
I wrote the following query :
select cust_id, ntile(3) over (order by cust_id) "Bucket" from trans_detls
The output is like this :
Cust_id Bucket
111 1
111 1
111 1
111 1
111 2
111 2
222 2
222 2
333 3
333 3
333 3
333 3
The problem is that I dont want the cust_id to overlap in buckets. That is one cust_id should be present in only one bucket.
Is this possible?
Thanks in advance.
Ameya

Or Something like..
SQL> select * from test;
        ID         NO
       111          1
       111          2
       111          3
       111          4
       111          5
       111          6
       222          7
       222          8
       333          9
       333         10
       333         11
       333         12
12 rows selected.
SQL> select id, ntile(3) over (order by rn) "Bucket"
2 from(
3      select id,row_number() over(partition by id order by no) rn
4      from test);
        ID     Bucket
       111          1
       222          1
       333          1
       111          1
       222          2
       333          2
       111          2
       333          2
       111          3
       333          3
       111          3
       111          3
12 rows selected.

Need help w/ setting up ports to run a server for America's Army

Need help w/ setting up ports to run a server for America's Army. I read wat u need to change the ports but i dont understand wat to put. here is wat the site says
Q: How do I run my own server?
A: Quick and dirty server info:
1. Edit RunServer.bat to change the map.
2. Run RunServer.bat
Or:
server.exe LAN MAPNAME.aao (Host a LAN game)
server.exe global MAPNAME.aao (Host a Public game)
Also: When you create a server setup and want to allow other users to join your server, you need make sure the following ports are open for outgoing and incoming traffic in your firewall: 1716 (UDP), 1717 (UDP), 20025-20045 (TCP), and 20047 (TCP). Failure to open these ports will prevent the server from accepting connections from other players or prevent other players from being able to see your server online.
There are several settings that also need to be defined in your server configuration INI file (in the Windows version, these files are located in “My Documents\America’s Army Server Settings\{settings file name}.ini”).
[Engine.GameEngine]
ServerActors=Andromeda.AndromedaMBS
[Andromeda.Andromeda]
GameServerIp=
Make sure that you set the actual IP address of the America’s Army Server under GameServerIp= (for example, “GameServerIp=000.000.000.000”). The supplied address must be your actual internet IP address, if this is left blank or you supply the IP address for your internal network (such as 192.168.0.x), your server will not be able to accept connections from the internet.
If your server.ini file contains the setting shown below, please change the QueryPort setting to 20025. This setting can also be removed, as the default setting is port 20025.
[Andromeda.AndromedaMBS]
QueryPort=20025
Punkbuster user fix correction.
If [Engine.GameEngine] block has been changed to read as below:
[Engine.GameEngine]
ServerActors=IPDrv.AndromedaMBS
Please add the following block to your INI file:
[IpDrv.AndromedaMBS]
QueryPort=20025
(Last Updated: 2006-04-20)

Your images are not stored in the catalog. They are stored in folders on your computer. If you imported images that were already on your computer using the "Add" Option they are still in that same folder. If you imported images from your camera then they are in the folders that you specified when you imported. The catalog points to those images wherever they are located, and records all of the adjustments that you make to the image. When you send an image to Photoshop for further editing and save that image in Photoshop, it is normally saved back in the same folder as the original image.
Images are not "saved" in Lightroom. The basic default workflow in Lightroom is to store all of the adjustments in the catalog, leaving the original image completely unmodified. The catalog becomes the central controlling mechanism. It is a database that contains pointers to where the images are located and a record of all adjustments made to those images using Lightroom. Properly managed, you only have those original master files and secondary files for the ones that you have sent to Photoshop for further adjustment. When you want to provide a copy for someone else, you use the export dialogue for that purpose. I often export JPEG images to share with others or to post on the web. After I have usedthe JPEG for its intended purpose I delete it.

I need help in setting up a wireless connection

I need help in setting up a wireless connection.
I have a 2005 iMac G5 and currently I am using a Qwest DSL Modem with a Belkin router.
Qwest suggested that I buy a new wireless modem/router. It may be the Motorola 3347 or another wireless modem. I am worried about security when on the internet and have read about changing the SSID password and use the WPA for encryption. All of this is a mystery to me.
Also, I would like to buy from Directv the Linksys wireless adapter to use on my HD-DVR receiver to get their “On Demand Movies.”
My question is, does my iMac G5 have all of the security I need to use a wireless modem, and with the Linksys adapter can I view my photos or DVD’s in iMovie wirelessly to my TV in the living room?
I am concerned about security with a wireless setup, but it seems that all of the new TV’s have the ability to have a wireless connection to the internet.
Any suggestions would help me.
Thanks,
DaisyMay

NETGEAR RangeMax Dual-Band Wireless-N Router with 4 Ethernet Ports
Model: WNDR3400-100NAS | SKU: 1208844
This wireless router enables speeds up to 600 Mbps for efficient operation and features a broadband usage meter that ensures accurate measurement of daily, weekly and monthly Internet traffic.
4 Read reviews (21)
Sale: $79.99

Payment release required; payment block set automatically Message no. F5707

Hello Friends,
I am trying to post vendor down payment with T.CODE F-48 but is am getting this Error " Payment release required; payment block set automatically, Message no. F5707"
Will any budy please make me clear with this issue ....
Have a nice day...
Regards
Amresh...

HI g.amresh,
Please check with the Payment Requiest F-47. Are you using this function then check Receipt box in F-48. I think that would be the reason.
Regards

Required help on setting up blaze DS.

Similar Messages

Maybe you are looking for