Required roles for alternate goods receiver ?

Hi All
We are working on SRM 5 (Classic Scenario). We have one scenario as below
Person A (has self service requester role) has created a shopping cart in which he/she has put person B (has self service requester role) as goods recipient.
In our case Person B is not able to receive the goods or not able to see the shopping cart to receive the goods (on confirmation screen). He/she can only see the shopping cart to receive the goods on confirmation screen when he/she has central receiver role.
We need advise whether this is standard behavior, if so can we change it through someway. Problem with this approach is , if we give central goods receiver role to all requester then everybody would be able to receive the goods for any shopping cart in that OPCO which is not desirable.
Regards
Pranay Gupta
+919711120111

Hi Trinath
Thanks for your answer. Unfortunately this does not work. User can see this with central goods receiver role only.
Regards
Pranay Gupta
+919711120111

Similar Messages

Requirement types & requirement class for trading goods.

Dear all,
I am working on a project in which there are only trading goods. Majority of the items are make to order & few are make to stock.
For the make to order scenario, what will be the requirements type & requirements class to be used for the trading goods. Which item category is to be used......will it be TAN or different......
For the make to stock scenario, what will be the requirements type & requirements class to be used for the trading goods. Which item category is to be used......TAN cannot be used here as it will be used in the MTO scenario so diffferent controls.
What control parameters should I take care of while defining the requirements class & requirement type.
With best regards,
Niyaz Sayyed.

Hi,
    As my understanding, You should copy a new requirement class and make the following parameters and its values.
   For Requirements,
      req.transfer is X
      Allocation ind. is 1
      Prod.allocation is X
     No MRP is blank
For assembly
                assembly type is 2,
                 order costing is X,
                 Special stock is E,
                 order type is ZXXX
You can refer to the sap standard MTO strategy 20 to complete your project. This is the most important parts defining the requirements for sales and distribution module.
george.shi

Putaway list for HU Goods Receive

Hello Gurus and Friends,
If a TO is created for every HU from an Inbound Delivery, how can I print a putaway list for all the HUs of the Inbound Delivery?
Thanks and cheers.

Hi,
You can print the list with the help of LL01 report.Please check whether in your system this report is in place.
Hope this will resolve your issue.
Regards,
Prashant

Customer master - goods receiving hours

Hello
In customer master, unloading points tab I would like to add one more default value for goods receiving hours namely 004 - on Sunday 1300 to 1700 hours?
Where can I do this configuration?
Thanks

Go to transaction OVSC.
Copy one of the standard setting to 004 and enter text as Sunday.
Maintain timings for Sunday for this 'goods receiving hours' by clicking the magnifying glass and entering your required time of 1300 to 1700 hours.

Goods receiving

All,
I'm looking for a Goods Receiving process that allows the receipt of multiple lines on a single PO. Currently we are using the FM 'BBP_CF_AUTOMATIC' which handles one line at a time and it seems when this is put in a loop the PO on the back end is locked due to being called for the previous line item. This results in only some line items being received.
Is there a different FM perhaps BBP_goodsmvt_create that can manage multiple line items at a time? Or any suggestions on how to use BBP_CF_AUTOMATIC so that it will allow us to receive all line items needed?
Thanks
Sandra

For example in the outbound delivery the following goods receiving hours are recorded:
14 jan 2008 (Monday)
Morning from 08:00 till 11:00 and
afternoon from 13:00 till 16:00.
SAP calculates in the delivery the earliest delivery time, in this case 08:00 on monday 14 jan 2008, which is places in the EDT13 segment. In our case we also need to send whole goods receiving hous time frame. This can be done in the EDT13 segment or a extra added segment (like EDT13) to the IDOC?

Goods Receive for Outbound Delivery Without Reference using MIGO

Dear Colleague ...
We might need your insight on the case below related to Goods Receive of Outbound Delivery without Reference using MIGO:
(1) In the current SAP Enjoy screen of MIGO, we are allowed to select the reference document (e.g. = PO, Material Document, Inbound Document, Outbound Document, etc.)
(2) We did 3 (three) kind of test set: GR for Inbound Delivery, GR for Outbound Delivery with STO and GR for Outbound Delivery without reference.
(3) The first 2 (two) cases work just find with MIGO. We believe it is because the receiving plant is pretty much determined in the reference document, which is PO (case 1) or STO (case 3)
(4) However, the last case came up with the error message "Goods receipt not possible for delivery 8000610236: error code 5". We believe that this is the standard design of SAP, that the receiving plant is required and it is not defined explicitly in the delivery document.
(5) Moreover, we also believe that that's the reason why SAP (via the Logistic Execution module) provide the Handling Unit and Shipment, which can be used to perform such receive function, which will imply the MM posting (goods issue and goods receive) IF there is stock transfer involved.
Appreciate for any thoughts or input on the above. Many thanks,
Alvon Sibarani

use transaction mb0a it will work for the scenario.

Change Batch number while goods receive for PO

Hi All,
I have a new requirement. The requirement is need to change the batch number in SAP while doing goods receive for the PO .
Please tell me how i can achive this.
Thanks
pabi

Where exactly is the problem? do you get an error message while changing the batch number in MIGO?
Usually you can just overwrite the defaulted batch number.

Goods Received Valuation for Order Delivery

Dear Experts,
In our business process planned order is created through project system. planned order is converted in to production order. while receiving finished goods throgh production order .
for exmple: production order 1:
         In finished good A with moving avg price is Rs150
                           for this we use raw material B Rs 120
                             labour & machine                       Rs 20
          toatl production cost is                               Rs 140
while goods receiving the production order credited with Rs 140.
For same material again we created one more Production order with another planned order.
                            production order 2:
                  In finished good A with moving avg price is Rs150
                                    for this we use raw material B Rs 140
                                      labour & machine                       Rs 20
                   toatl production cost is                               Rs 160
while goods receiving the production order2 credited with Rs 140. which is previous production order1 cost.
our client wants to credit production2 with Rs 160.
this credit posting Rs 140 is taken for all production order which is created to mateial finished good A.
Define Goods Received Valuation for Order Delivery here i assigned the valuation varient to the plant.
Is there any configuration for this apart from the valuation type V in the Material Master.
Please help on this. I will be grateful for all of you.
Thanks and Regards
Raju

Hi
The situation you are describing is a standard behaviour... SAP documentation states that in MTO scenario, your price from 1st goods receipt is used to valuate the subsequent Goods receipts
I think, both of your production orders pertain to the same project.... Correct me if i am wrong plz...
If you create another project, 140 will not be used... System will use the price from the 1st goods receipt of that project
This behaviour is controlled by requirement class settings. Check what requirement class you are using and see what all valuation settings have you made there.. especially in fields "Valuation" and "Without valuation strategy"
Refer the following path in SAP library or help.sap.com
- Controlling > Product Cost Controlling > Cost Obj Contr > Product Cost by sales order > Valuated sales order stock > Std price with valuated sales order stock
This appllies to both sales order stock and project stock
This explanation is very detailed and comprehensive... Believe me, these settings are extremely influential and must be done with utmost care.... Understand this documentation well b4 doing the settings
Regards
Ajay M

If Excise invoice required for finished goods.

Hi All
I have doubt, whether excise invoice is required for finished goods or not. As I am trying to create MIGO doc for PO of finished material, and it is saying, no excise invoice possible for finished material RG1.
Can you advise please.
Regards
Mukta

HI
Thanks for this. When we are executing Utilization transaction J2IU, it is giving dump after prompting popup with 'Data will be lost PLA NCCD B35', 'No record selected , excise invoice cancelled'.
Run time error is saying -
Short text
    Structure-type conflict when calling a FORM
What happened?
    Error in the ABAP Application Program
    The current ABAP program "J_1IRUTZ" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call of the FORM "DETERMINE_DEFAULT_VALUES" is incorrect:
The actual parameter no. 2 is at PERFORM not compatible with the
structure type requested by FORM "DETERMINE_DEFAULT_VALUES".
The FORM "DETERMINE_DEFAULT_VALUES" is defined in program "SAPMJ1II".
This error occurs in Unicode if the fragment view of the types is
incompatible.
Can some one suggest if we need to apply any OSS NOTE.
Regards
Mukta

Item category for free goods that does not require extra free goods

Hi all,
I have created 3 item categories (ZM1J, ZM0J and ZMFJ)
ZM1J is standard item for sales
ZM0J is free goods
ZMFJ is also free goods
I have setup VBN1 for free goods "buy 10 get 1 free" and my order is including these 3 item categories
ZM1J 10 EA and ZM0J 1 EA. These 2 lines are correct as I need.
Then I give other free goods which is ZMFJ 10 EA and system is asking me to give free goods 1 EA but I don't want to give free goods for ZMFJ. I will deliver only 21 EA (10 for sales and 11 for free)
What config it should do for this case?
Another question, ZM0J is selected by default. How to manually change it to ZMFJ in sales order? This is because some case, I still need to use ZM0J.
Please advise. Thank you very much.
Best Regards,
Darin

Hi,
Item category is determined by the four combination
Sales order + item category group + usage + item category at higher level.
Now you are using free goods determination procedure.
So that does not depend upon item category determination.
You have to define the item category determination so that proper delivery and proper pricing happens.
Now if you are giving 10more free item for which you have maintain free goods determination master data.
Then system will automatically give one more free goods for that material.
but if you giving some other material as a free goods then please let me know.
Give your requirement that in which way you want to process your ZMFJ then we can give you better suggestion.
To define alternative item category go to
IMG u2013 SD u2013 Sales u2013 Sales documents u2013 sales document item u2013 assign item category.
Over here you can assign alternative item category for your combination.
If you assign over here then you can change manually in the sales order.
Regards
Raj.

Uploading Production Requirements For Finished Goods From External System To Run MRP For Components in SAP.

Hello Production Planning experts,
I'm looking to solve the current business problem:
The company bought a third party software (JD Edwards) to calculate production requirements instead of using SAP's standard Production Planning or a tool like SAP's APO. They run a batch job to query Sales Orders, Deliveries, available stock, stock in transit, etc. from sap and feed/upload it to the third party software so it can calculate the Finished Goods Production Requirements for them. They love the third party software, so replacing it is not an option. Since the third party software is already taking into account Sales Orders, Deliveries, available stock, stock in transit, etc. from SAP, it just outputs a "Finished Goods Production Schedule" by week.
My questions are:
1) What's the best way to upload something like that in SAP in the form of Planned Orders or something of that nature?
After i get that schedule in SAP:
2) Is there any way to calculate components' requirements for that "Finished Goods Production Schedule" alone? The company would like to IGNORE existing stock AND expected-goods-issues in the future (sales orders, deliveries, etc) for Finished Goods ONLY. The components calculations would work the standard MRP way, taking into account existing stock and AND expected-goods-issues in the future (sales orders, deliveries, etc)
I started looking into Master Production Schedule (MPS), but I don't know if that's the right approach since I'm not very familiar with it.
Thanks in Advance! I will gladly reward points for helpful/correct answers.

Hello Oscar
I suggest you to upload your production plan in the for of "Planned Independent Requirements" using BAPI BAPI_REQUIREMENTS_CREATE. Later, MRP will create planned orders to cover the PIRs.
If you don't want to consider the existing stock of the finished product, you should use the planning strategy 11 to create your PIRs. Take a look on the following link for more details about this planning strategy:
Gross Requirements Planning (11) - Demand Management (PP-MP-DEM) - SAP Library
Here you will find the following information:
The make-to-stock strategy gross requirements planning is particularly useful in mass production environments; it is often combined with repetitive manufacturing. This strategy is particularly useful if you need to produce, regardless of whether you have stock or not. For instance, steel or cement producers might want to use this strategy because they cannot shut down production; a blast furnace or a cement factory must continue to produce, even if this means having to produce to stock.
This strategy is also frequently used if there is a Material Requirements Planning system in a legacy system that needs to be linked to an SAP system which serves as a production execution system. The legacy system calculates a specific production plan, which has to be executed, regardless of the stock situation in the SAP system
It looks like this planning strategy is exactly what you are looking for.
BR
Caetano

Help Required in Authorization Roles for Workbooks

Hi All,
In our project, we have a requirement of creating a role for users with below authorizations.
1.     Can display and execute the workbooks in the role menu.
2.     Can create copy workbooks ( Save as) in the role menu.
3.     Can not delete the original and the copy workbooks from role menu.
We are using an authorization object S_RS_FOLD with u2018FALSEu2019 for restricting the user from deleting workbooks.
We also need to add one more object S_USER_AGR (without u2018Deleteu2019 property) to give the authorization of creating copy workbooks in the role menu.
Object S_RS_FOLD this is working fine without S_USER_AGR. But after adding S_USER_AGR (without delete property), user is again able to delete the workbooks.
So how can we achieve both the functionalities where user can not delete the workbook but can create copy workbooks in the role menu.
Thanks,
Sachin

Re: Adding report (query & workbook, templates) in roles
Go through this thread.
And in our Project we have created one role for accessing workbooks. in that end user can access the work book but saved one and user cannot resave or delete the work book.
we have added Auth objects S_TCODE and S_GUI.
in S_TCODE we have added RRMX and in S_GUI we have given 60(IMPORT) access to the users.
So that they can just share the workbook. nothing else can be done.
Try like this. Hope this would help you.

RFC Destination is required for R/3 receiver system

Hi All,
Is RFC destination required for R/3 receiver system? Scenario i,e File >XI> RFC
How XI system communicate with R/3 receiver system?
Regards,
Sameer

Hi,
RFC dest is not required in this case, XI will communicate thru RFC channel which you will configure as receiver channel. Hence in this channel, you will mention the required parameters.
Please search this fourm and you will get plenty for blogs with step - to -step details of configuring the FILE 2 RFC scenario.
Regards
Sai Ganesh

Which are the required roles/privs for viewing all scheduler jobs in OEM?

Platform: Oracle 11.1.0.6 Enterprise Edition (64) Windows 2008 R2 Server
- I've created a new Admin user in "OEM>Setup>Adminstrators>Create"
- I checked the user in "OEM>Server>Users":
CREATE USER "SA_ADMIN"
PROFILE "DEFAULT"
INDENTIFIED BY "saadminsa"
DEFAULT TABLESPACE "SYSAUX"
TEMPORARY TABLESPACE "TEMP"
ACCOUNT UNLOCK;
GRANT SELECT ANY DICTIONARY TO "SA_ADMIN";
GRANT "MGMT_USER" TO "SA_ADMIN"
- "SA_ADMIN" was granted only the permissions above.
- I can log in OEM as "SA_ADMIN"
- I can see OEM backup jobs and the history
- But I cannot see any "scheduler" jobs in "OEM>Server>Jobs"
- I get a lists of the jobs in "OEM>Scheduler Central" but I cannot display any more information of "scheduler jobs"
- I logged off from OEM
- I granted SCHEDULER_ADMIN role to "SA_ADMIN"
GRANT SCHEDULER_ADMIN TO "SA_ADMIN";
- I logged back in OEM as "SA_ADMIN
- I can now see some scheduler jobs, but not all of the jobs, I still cannot see any of the new jobs I created logged in OEM as SYS.
Which are the required roles/privs for viewing all scheduler jobs in OEM?

if you grant "SYSDBA" to the new Admin user then you can see the "scheduler" jobs.
GRANT SYSDBA TO "SA_ADMIN";
I wanted to grant "read" access in OEM for the new user.
This behaviour is strange.
Without the "SYSDBA" role the new user can see the OEM backup jobs that were create in as SYS, but it cannot see the "scheduler" jobs.

Report Requirement for the Goods Movement

Dear Gurs,
I want to see the entire goods movment happend for producing one Finished material.
Is there any std report that can show the list of good movement (261)
Eg
For producing 1 Qty FG I required 50 Kg of SF .
That SF consits of 2 Raw material RM 1 and RM2 .
RM1 Required 35 Kg and RM 2 Requires 15 Kg
During Good Movement (261)of - SF
RM1 - Batch 421 - 12 Kg
RM1- Batch 422 - 18 Kg
RM1 - Batch 433 - 5 Kg
RM2 Batch 888 - 5 Kg
RM2 Batch 889 - 10 Kg
During the Good Movement (261)of - FG
SF Batch 1123 - 50 Kg Issued.
With reference to the Finish material , I want to seen the goods movement happend for the FG .
Is there any std report to seen the details at Multilevels
Srinivasan.

Hi,
I donot think such Multi level Consumption Report is available. I think if use collective order concept, u can get it. Otherwise u have to pass the list Production order number for each BOM level at COOIS.
or u have to develop customized report.
Pradeep

Required roles for alternate goods receiver ?

Similar Messages

Maybe you are looking for