Required this 'dd.mm.yyyy HR:MM:SS'

Hi,
i am writng a syntax below. my requirement is date and time should be in dd.mm.yyyy HR:MM:SS' format.
How to do it??
data:l_header type string.
concatenate 'HDR' 'AEB Compliance Screening' '3.1' SY-DATUM SY-UZEIT
into l_header separated by ';'.
append l_header to gt_lfa1.

hi,
Please try this:
data:l_header type string.
data w_date type char10.
data w_time TYPE char8.
Write sy-datum to w_date.
write sy-uzeit to w_time.
concatenate 'HDR' 'AEB Compliance Screening' '3.1' w_date w_time
into l_header separated by ';'.
Append
Regrads,
Komal
Edited by: Komal Lakhwani on Feb 9, 2010 7:26 PM
Edited by: Komal Lakhwani on Feb 9, 2010 7:26 PM

Similar Messages

How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4). Everytime I open the airport utility I get the following message: "
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
I'm getting the exact same message on my other computer, a Mac Air.
So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
Thanks!

See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

WARNING The AdfFacesFilter has not been installed. ADF Faces requires this

The message:
WARNING The AdfFacesFilter has not been installed. ADF Faces requires this filter for proper execution.
is being displayed when I run my program. The program runs fine but I am wondering what causes this message and what can I do to solve it. I noticed that others have had this problem but there was no solution provided in their thread.
Thanks,
Thom

Hi Thom:
You should have something like this in your web.xml file:
<filter>
<filter-name>adfFaces</filter-name>
<filter-class>oracle.adf.view.faces.webapp.AdfFacesFilter</filter-class>
</filter>
<filter>
<filter-name>adfBindings</filter-name>
<filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
</filter>
<filter>
<filter-name>ADFBindingFilter</filter-name>
<filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
<init-param>
<param-name>encoding</param-name>
<param-value>UTF-8</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>adfFaces</filter-name>
<servlet-name>Faces Servlet</servlet-name>
</filter-mapping>
<filter-mapping>
<filter-name>adfBindings</filter-name>
<url-pattern>*.jsp</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>adfBindings</filter-name>
<url-pattern>*.jspx</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>ADFBindingFilter</filter-name>
<url-pattern>*.jsp</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>ADFBindingFilter</filter-name>
<url-pattern>*.jspx</url-pattern>
</filter-mapping>
As well as:
<servlet>
<servlet-name>resources</servlet-name>
<servlet-class>oracle.adf.view.faces.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>resources</servlet-name>
<url-pattern>/adf/*</url-pattern>
</servlet-mapping>
This will ensure that the ADF Faces context gets initialized on the first call to your controller servlet. See the General Installation Section of the page at: http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/doc/installation.html for more detail.
Johnny Lee

When trying to use my banking apps I get the error "Network Required This application requires an active Internet Connection. Please try again"

When trying to use my banking apps I get the error "Network Required This application requires an active Internet Connection. Please try again". This happens with two different apps from two different banks. One of them works occasionally and have not figured out why. I have cell signal and I am on a strong WiFi network. Same thing happens when I turn off the WiFi too. I have tried uninstalling and re-installing the app with no improvement. I can't seem to find any setting that would cause this. Does anyone have any suggestions?

I can access the internet just fine in the browser and i can use any other app i have.
Sent from my Verizon Wireless 4G LTE DROID

This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information.

I am trying to update my Airport Extreme. I go into the Airport Utility and this is the message attached I get when clicking on it.
"This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information." That;s it.
I guess I can hard reset it, but this seems weird. Any advice would be nice.
Thank you.

Dear Bob, I have same problem:
"This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information."
My MBAir is running OSX 10.9.3 and the AIrPort Extreme I'm trying to use is A1143.
Thanks

Restored iPod to 4.2.1 Previously working apps now say "Update Required: This app requires IOS 4.3"

I recently restored my iPod Touch because e-mail, contacts, and calendar stopped working. Upon restore, I noticed many apps failed to reinstall. Apps like Yelp, Facebook, etc. Roughly 10-15 in total are missing entirely. I can select the app in iTunes and move the icon but the application will not install. If I install the app from the iPod its self, an error comes up saying "Update Required: This app requires IOS 4.3". IOS 4.3 is not available for my iPod.
I don't care if I don't have the latest version on the App store, but I do want the latest version available for my device.
How do I install the latest compatible version from the App store onto my iPod?
(I also have a new iPad. I think that had a part to play in replacing the compatible apps with incompatible ones.)

Mr Spork wrote:
Ouch. Well that was a terrible tradeoff... lose 15 apps to get 3 working.
We're all getting caught out by that one. Time for some feedback to Apple...
http://www.apple.com/feedback/ipodtouch.html

My ipod touch 1st gen keeps on saying when i come to download an app it says update required this app requires ios 4.3

my ipod touch 1st gen keeps on saying when i come to download an app it says update required this app requires ios 4.3 please help

Sorry, but there is nothing you can do other than buy a newer iPod. A 1st-generation iPod touch cannot run any version of iOS later than 3.1.3 and hence cannot run any app that requires a newer version.
Regards.

Limit PO : Enter a period for which you require this item

Hi Experts,
I am trying to create a Limit PO programatically using "BAPI_POEC_CREATE",
i have filled all the necessary tables Item, partner,Org data , account assignment.
However I did not find any field in BAPI_PO_ITEM_D structure where i can specify the period/duration for this limit PO.
There is only one field DELIV_DATE to mention the delivery date.
When i fill this i am getting an error "Enter a period for which you require this item".
Any solution to this error?
Regards,
Ashish Shah

We are using the extended classic scenario and the SAP standard process to create limit items. For the PO that is created in ECC the to/from dates are in EKKO KDATB and KDATE respecitvely.
On the SRM side those fields are in the table BBP_PDIGP vper_start and vper_end
The interesting thing now that I look at my test case. The PO in SRM does not have a validity start and end date at the header level it is all at the line item level. However, it looks like when it created the PO in the backend it used the to/from date from the first line item.
Hope this helps.
Sandra

HT204266 my ipod reset and all my previous apps now say "up date required" this app requires ios3.0. up to 4.0.

my ipod touce reset and all previous apps now say "update required" this app requires ios3.0 up to 5.0. I have not been able figure out how to update

It sounds like you have a 1G iPod Touch, which can go as high as iOS 3.1. If it's a 2G iPod Touch, it can be updated to iOS 4.2.1. See here to help you identify what generation iPod Touch you have.
Identifying iPod models
You must use this link to purchase the 3.1 update.
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
B-rock

I need to know how I can disable the automatic updates of Firefox, since I work in a company that is requiring this. Ideally, by group policy or some means to disable all network computers

I need to know how I can disable the automatic updates of Firefox, since I work in a company that is requiring this.
Ideally, by group policy or some means to disable all network computers

Some info here (group policy) --> http://www.unidesk.com/blog/how-disable-firefox-auto-updates<br />
Above article refers to --> http://sourceforge.net/projects/firefoxadm/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Date format Required as - DD - MM - YYYY instead of MM - DD - YYYY

Dear SDN,
I am getting Due date for Net Payment (Technical neme: 0NETDUEDATE)as for today (2/29/2008) for the report Top 10 Credit memos (0FIAR_O03)...
But the client requires it has to appear as 29/2/2008...
I mean we need the date format as DD - MM - YYYY ...
Please Resolve this issue..
Help will be greatly appreciated with points..
Thanks in advance

Hi Venkat,
You can achieve inone way is
go to TX - SU01
There select 'Default' Tabstrip chane date format to
DD - MM - YYYY
you can get in that format.
else try to find some F.M. for conversion...........
Regards,
Viajy.

The iPod "TAMI DUGARD's iPod" cannot be synced because there is not enough free space to hold all of the selected items (additional 146.5 MB required). this was from my ipod mini trying to sync and it wont let me sync so... could u help me i really needit

I really need help because my ipod mini isnt working correctly my mom just gave it to me and The iPod “TAMI DUGARD’s iPod” cannot be synced because there is not enough free space to hold all of the selected items (additional 146.5 MB required). it says this. Over and over when i try to sync it too my itunes what does this mean and its a 4gb

It means you try to sync an amount of content to your iPod Mini that exceeds for 4 GB, or the amount of space that is available on the iPod. See this article for more details.
How to sync music to your iPod when your library is bigger than your iPod storage space
B-rock

How to pass in URL time format like this : DD/MM/YYYY HH24:MI:SS ?

Hi,
I have items date format in the folllowing format : 'DD/MM/YYYY HH24:MI:SS'.
I want to pass them in URL but the sign':' is interpreted as an end of value by apex;
For example if the item value is '21/03/2010 10:20:43' i get this as a result '21/03/2010 10';
How top pass the tiem value in the URL wthout if possible to change the mask format ?
Thank you for your help !
Christian.

This a bit of a brute force aproach, but is worth considering as it caters for all Apex specific characters (that htf.escape_sc preserves). It's also useful when extracting text to SQL scripts that may include line feeds, quotes etc etc. RAW representation is twice the as long as the input date string, so use with caution... It also helps obfuscate the URL which helps reduce URL hacking...
SQL> select UTL_RAW.cast_to_raw('21/03/2010 10:20:43') from dual
UTL_RAW.CAST_TO_RAW('21/03/201010:20:43')
32312F30332F323031302031303A32303A3433
1 row selected.
SQL> select UTL_RAW.cast_to_varchar2('32312F30332F323031302031303A32303A3433') from dual
UTL_RAW.CAST_TO_VARCHAR2('32312F30332F323031302031303A32303A3433')
21/03/2010 10:20:43
1 row selected.
Edited by: maceyah on Mar 25, 2010 9:38 AM

How can update my iphone 3gs to iOS 5? coz every time i tried to install apps on my phone the msg "UPDATE REQUIRED,THIS APP REQUIRES iOS5"

pls help me with my prob.. i cant download any apps because of this..

If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623

I have the first versiOn of iPad. I cannot seem to get upgraded to newer ios. Certain apps require this, now. Is apple going to shank its veterans and not support us anymore?

Help

Many Apps now have legacy versions available for older OSes.
App Store: Install the latest compatible version of an app
http://support.apple.com/kb/ht5919
You may need to download the newest version to a compatible device or a computer running itunes so it gets registered to the Apple Id and can be downloaded then form the Purchased tab in the App Store App.

Required this 'dd.mm.yyyy HR:MM:SS'

Similar Messages

Maybe you are looking for