Requiremen​ts Gateway nested requiremen​ts

Hello,
I'm new requirements gateway user and I wonder if I'm using it correctly.
I'm trying to define a requirement in a doc file covered in a child document and also by child of this child.
Example
Top File : REQ_1                                           ​       
Child file : { Cover REQ_1
                       REQ_11
                       REQ_12
Child child file : Cover REQ_11
Of course the syntax is wrong but the principle is there. I'm trying to have a REQ_1 coverage of 50% (or 66%).
I've tryed  macro requirements but it does not seem to fit my needs. I do not want to have all low level requirements in the top level document.
Thanks
JF

Hi JF,
Unfortunately, there is no way to have a percentage of a specific requirement covered. In Requirements Gateway, either a requirement is covered or it is not. The percentage of the overall requirements covered is then displayed.
If you don't want to have low-level requirements in the same file as the high-level requirements, you can use the MultiWord Type to specify a directory of requirement files to read in as a single Requirements Gateway document. This way you can spread your requirements amongst multiple files.
Manooch H.
National Instruments

Similar Messages

  • Requiremen​ts Gateway and Doors Types

    No Requirements Gateway board but am working with TestStand also..
    I am pulling requirements from DOORS and I need to filter out a column but I cannot find a way to check that a column is NOT empty. I already made a DOORS advanced type and I am trying to edit the requirement field to filter out a column called Interface Name. I want to only pull in the rows where Interface Name is populated. I am currently pulling in useless information where the column is empty. I tried leaving the value blank and negating it to mimic a 'not empty' concept and that did not work. Any suggestions?

    Hey cframe,
    You should be able to do this by specifying that the object should have an attribute of a certain name. For example, this is the DOORS module for the basic DOORS example we provide with Requirements Gateway:
    And here is an example of how you could configure the Requirement field to only pull requirements which have a Priority specified:
    By specifying that each requirement must have an Attribute with the name "Priority", you are configuring the type to only recognize requirements which have a Priority defined.
    I hope this helps, and please let me know if you run into any trouble with it--I'd be happy to help further if this doesn't solve it.
    Daniel E.
    TestStand Product Support Engineer
    National Instruments

  • Exporting LabViiew vi documentat​ion from requiremen​ts gateway to Telelogic DOORS.

    1) I have entered documentation information in to my vi and can see it in requirements gateway. When I export it ot DOORS, it gets added to the bottom of the objects in DOORS. I am useing a company template in DOORS and need my vi documentation to come into DOORS at a specific paragraph and not at the bottom of the document. Is it possible to do this?
    2) When I export to DOORS all the information from a vi "Documents" property wends up in one single object. Can I split this to two or more objects?

    Hi percy,
    Unfortunately, the export tool does not have the features you are looking for.  The tool is intended to provide a way to easily move your requirements data into DOORS with the intent that you will customize the order and organization of the data within the DOORS environment.
    Al B.
    Staff Software Engineer - TestStand
    CTA/CLD

  • Requiremen​ts Gateway TS-Intermi​diate File

    Hi,
    I would like to know if there is change to modify the Intermidiate File Genenerator for TestStand?
    or is there a way to implement user defined generators?
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
    Solved!
    Go to Solution.

    Hi Al,
    I have decided to try it with the report.
    But combining ID and Limit in the XML Report will fail.
    I opended a new thread to discuss: 
    http://forums.ni.com/t5/NI-TestStand/Requirements-​Gateway-Identifier-Format/td-p/2338498
    btw i have looked on the NI-RG code. It seems most stuff is done in ot-scripts.
    I suppose TeststandSequenceFile generator is done in ot, too. But this script is complied.
    i have no change to look inside. Is there a reason why the compiled one is shipped while the
    Microsoft one's like Word,Excel and Access are non complied ?
    Regards
    Juergen  
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • Requiremen​ts Gateway OT-Script example 2.Trail

    Hi BlueOnes,
    I am still waiting for a small answer on following thread.
    http://forums.ni.com/t5/NI-TestStand/Requirements-Gateway-OT-Script-example/td-p/2648861
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

    Duplicated:
    See here
    http://forums.ni.com/t5/NI-TestStand/Requirements-​Gateway-OT-Script-example/m-p/2648861
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • Nothing visible on the Requiremen​ts Gateway Graphical View

    I have a Requirements Gateway project with an number of documents linked together.  There are a couple of errors as far as duplicate names, and lots of missing link, but everything displays in the Coverage and Impact view.  However when I got to the Graphical view, its blanks.  I seem to remember this occurring before, but for the life of me I can't remember how I fixed it.
    Any ideas?

    Hi Al,
    I have decided to try it with the report.
    But combining ID and Limit in the XML Report will fail.
    I opended a new thread to discuss: 
    http://forums.ni.com/t5/NI-TestStand/Requirements-​Gateway-Identifier-Format/td-p/2338498
    btw i have looked on the NI-RG code. It seems most stuff is done in ot-scripts.
    I suppose TeststandSequenceFile generator is done in ot, too. But this script is complied.
    i have no change to look inside. Is there a reason why the compiled one is shipped while the
    Microsoft one's like Word,Excel and Access are non complied ?
    Regards
    Juergen  
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • NI Requiremen​ts Gateway - Requiremen​ts Management Software

    Hi,
    I would like to know the  "NI Requirements Gateway - Requirements Management Software"
    when it was launched?. Is the updated version available?. Would like to know about the multi licences details and price?.
    Thanks
    Kalyan

    Kalyan,
    Version 1.0 of NI Requirements Gateway was first introduced in May 2006 and is still the most current version available. 
    If you would like to know about pricing details for multi-developer licenses, the best resource is to contact your sales representive directly at ni.com/contact.
    You can also find in-depth usage of the tool discussed in these two webcasts:
    Requirements Gateway for Test, Measurement, and Control Applications
    Requirements Management and Traceability with LabVIEW and NI Requirements Gateway
    Josh W.
    Certified TestStand Architect
    Formerly blue

  • Requiremen​ts Gateway 1.1 terminates docx processing when encounteri​ng a symbol

    My Word (*.docx) test procedure includes a symbol to denote margin around an expected value such as: "Each motor current reads 45 ±1 degree C"
    When Requirements Gateway creates the intermediate document, it terminates the creation just before the "±" symbol, so the rest of my document is not included in the file. Obviously this means my remaining covering statements are not included in the coverage analysis. Removing the above symbol is the workaround.
    Is this known behaviour?
    “A child of five could understand this. Send someone to fetch a child of five.”
    ― Groucho Marx

    Maybe it makes a difference that it's contained in a table. Here's an example docx file and the intermediate file that was generated. Note the intermediate file stopped at the noted symbol.
    “A child of five could understand this. Send someone to fetch a child of five.”
    ― Groucho Marx
    Attachments:
    Test.docx ‏20 KB
    Test.txt ‏2 KB

  • Requiremen​ts Gateway OT-Script example

    Hi,
    I have written my own TestStand NIRG intermidiate file generator as a COM compontent.
    Now i would like to integrate it in NIRG via the OT-Script.
    I have created a new .br file placed a new Method inside there.
    Well at the moment i see my Teststand convert tool in the convert tool's drop-down list in types editor panel.
    Of course i am not famous with this kind of scripts.
    In the other br files there is a lot of code, but there are no comments.
    Is there a suitable example or documentation on OT-Scripts ?
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

    Duplicated:
    See here
    http://forums.ni.com/t5/NI-TestStand/Requirements-​Gateway-OT-Script-example/m-p/2648861
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • Requiremen​ts Gateway and TestStand

    Hello,
    This one is more of a RG question but there is no RG area to post.
    I have a Word Document that defines the requirements for a test sequence.
    The requirements are covered by both
    1) LabVIEW VI's 
    2) TestStand sequence.
    What I want to do is see what my coverage of the Word Documents Coverage is.
    I've noticed that when I've added the TestStand sequence to my Req Gateway project, every entry in the TS document spawns a "derived requirement".
    Is there a way to switch this off?
    I want to link my word document to a place in the test sequence and say this is where I cover i.e. Saving the Data. I do not intend to link my TS Sequence with a Results File.
    The annoying bit is when I look at the analisys view even though my Word Document is covered 100% there still is a number of uncovered derived requirements comming fromthe TS Sequence.
    Thanks for any advice!.
    Maciej
    Solved!
    Go to Solution.

    I re - read my post and it is clear as mud...So I'll try to be clearer.
    Two issues I'm facing:
    1) Linking a TestStand sequence to a Word Document causes RG to generate additional "derived' requirement for each of the TS items ( steps or sequences ).
    I would like to switch this fuctionality off. I'm not interested in the Derived Requirements in this scenario.
    2) Please see the desired structure linkage:
    If I set up my project this way and I for example Cover 1 requirement in the word document in 3 places in the Test stanad sequence only I see the following message.
    Requirement 'REQ_ControlMotorRPM' is not covered.
    Error: Uncovered requirement
    ( Please see the Desired Structure png )
    It would seem to me that Requirements Gateway ONLY allows me to Bind One Document to One LV Project or TS Sequence.
    If I remove my LV projects from the covers dependency the requirements are covered fine and no error occures.
    In my case I have One requirements document that is adressed by a TS Sequence and 2 LabVIEW Driver Projects ... I can't seem to configure this right.
    So my requirements document has 100% of the requirements.
    Some of them will be sorted out by  the TestStand Sequence , and some of them will be sorted out by my Driver Projects , how do I configure RG so that one Spec is solved by 3 software items?
    Thanks,
    Maciej
    Attachments:
    DesiredStructure.png ‏7 KB
    WorksFine.png ‏4 KB

  • Api for Requiremen​ts Gateway

    Hi
    When looking into NIRG's bin folder there is nirg.tlb.
    Is this a public library and is it possible to Remote Control NIRG?
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
    Solved!
    Go to Solution.

    Hi Al,
    This morning i spent some time to the COM interface (.tbl) which is shipped with nirg.
    After some tests, i got it running in that way i liked. Open, Reload and Save Project.
    It is  working well. Only on closing i do not know the right parameter value.
    It would be nice on future releases that there is a short parameter description.
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
    Attachments:
    AutomateNirg.zip ‏4 KB

  • Requiremen​t Gateway

    Hi,
    To display the list of "NotAppl" requirements, currently i am using loop on attributes with the condition as follows.
    (attr4.typeName = "Result" AND attr4.ident = "NotAppl")
    How to display the list of requirements which does not have the "Result" attribute at all? (i.e typeName itself is not present)
    What is the modification required in the above condition?.
    What is use of "loop when absent" test box in the attached image?
    Thanks in advance for the quick reply.
    Thanks
    Kalyan
    Attachments:
    test.jpg ‏106 KB

    Kals,
    You can create a loop on the requirements of a document (or of the entire project) and use one of the following conditions:
    $SOME(req1.attributes[typeName = "test"])
    $NO(req1.attributes[typeName = "test"])
    What these will do is return true or false depending on if the requirement has any attributes whose typeName is "test".
    The loop if absent condition can be used to force the contents of a loop to run even if there are no elements to loop over.  For instance, if you had a loop over all sections and then a loop over all requirements, if you set to loop if not present over the requirements loop, then it would run even if the section had no requirements.  See pages 58-59 of the Customization Guide for more information.
    Josh W.
    Certified TestStand Architect
    Formerly blue

  • Requiremen​ts Gateway Identifier Format

    Hi,
    this thread has it source in this one:
    http://forums.ni.com/t5/forums/replypage/board-id/​330/message-id/39779
    by using the identifier format i should be able to create my ID for requirements and references as well.
    For text files it is working well, but when i am using xml files in the reference pane it seems not working.
    It attaches only the \1  and \2 is empty and the reference is created twice. One has the nodevalue for <Low>
    the other one has the <Element> Value. 
    Is there a way to fix this ?
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

    Hi Al,
    here is a small taylored example which descriptes my "requirements"
    Regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
    Attachments:
    DemoToNI.zip ‏10 KB

  • Requiremen​ts gateway reports

    In the rule check i have some "uncovered requirements" and some "Requirement defined several times".
    I am able to generate report for the "uncovered requirements". Please see the attached JPEG for details.
    I would like to generate report for "Requirement defined several times".
    I have seen loop on leaf requirements there is a condition isUncovered.
    What is the condition i have to include to generate report for "Requirement defined several times"?
    Please reply ASAP.
    Thanks
    Kalyan
    Attachments:
    req-1.JPG ‏85 KB

    Thanks for the details. One more details i need.
    How to count the "Requirements defined multiple times" using code OT scripts?
    Please let me know any inbuild macro for this?
    I am able to count "Uncovered Requirements" using inbuild macros.
    In the rules checking there is a bold dot display before each element. How to include is?. Please see the red marked arrow in the attached image.
    Thanks a lot for the quick reply.
    Attachments:
    image.JPG ‏82 KB

  • Audigy 2 ZS Notebook Minimum CPU requiremen

    I have a Gateway solo 5300 and would Like to Improve the Output of the sound while using earpieces. I saw the Min requirements But would Like to know if a 650Mhz CU would be ok?
    thanks.
    Dw

    ? A soundfont cannot contain alle drumkits, and it is not nessecary at all. I dont know a soundfont bank wich contains a complete set of drumkits, too. There are only some soundfonts like the crysis soundfont (to big for its "bad" quality) wich have some dummy-drumkits/ entrys or slightly modified sounds for each than usual. If all drumnkits would be stored in high-quality, the soundfont would be huge... Every synth i know uses the standard drumkit, if the chosen one is not existent. This is not optimal, but it will guarantee, that the the MIDI file or Program/ game will work. The KXDrivers wont do this. SO they are not useable for General MIDI. Only for MIDIs and soundfonts fitting together. But thats not the point of General MIDI. CMSS isnt working with these drivers, too. Dolby decoding/ encoding isnt possible with them, either. These drivers are not bad, but if you want a completely working card, KXdrivers are worthless.

Maybe you are looking for

  • Created by : Vendor Report

    Dear Experts , Is there a standard SAP report that shows which user has created a vendor ?? The details are there in table LFA1 . But i need a standard SAP Report . Regards Anis

  • Display Web page in SWF file?

    I want to use flash to build a desktop application for our touchscreen kiosk... And I need a button that will open a web page inside of flash... and not using IE or FF... If I use IE with getURL... and the user happens to touch outside of the browser

  • Print Services : How to Print to a (Postscript) File ???

    Hi Forum, for quite a while I'm thinking about migrating our print server to Mac OS X Server, unfortunately I could not find a way to easily create and manage multiple "Pritn-to-File" queues. More precisely: what I would need is the ability to create

  • Data size limit on long column

    I saw one of the Oracle JDBC FAQ saying 8.0x thin driver does not support long column with data size >2k using setString. is there any latest Oracle driver support long column with data size > 2k ? null

  • Compressor fails when using FCP "export to Compressor"

    I have a 6-minute long, ProRes422 (HQ) project that I'm trying to export uncompressed.    I'm trying to avoid the typical "Export QuickTime Movie" function because I get awful gamma shift issues.  The colors are washed out and the image just looks li