Requirement for bin

hello gurus
I just want to know what are the requirement for the bins(racks) to be implemented in the SAP for different storage location, we have implemented bins at warehouse but now we have to maintained them at storage location also.
Regards
Edited by: usmfarhan on Dec 29, 2008 5:12 AM

there is no customizing, and there is no check or restriction either.
You maintain the bin at the storage location level of your material master (this is just a text)
You can then see this bin when you lookup stocks in MMBE. You can create inventory documents by bin in MI31.
That is all where SAP uses this field. If you want see this info in any other transaction, then you have to do ABAP developement.
You have to organize yourself and your staff to put the material always into this one bin which is maintained in the material.
Or if you decide that you want store the material in a different bin, then you have to change the material master accordingly.

Similar Messages

"The software required for communicating with the iPod is not installed..."

I realize my explanation of my problem is long-winded, so if you want a shortened version, here it is:
I've followed all the instructions trying nearly everything, and no matter what I do, iTunes gives me the error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." My G5 iPod (60GB) works on two other computers (both without any music on them), so I assume there something wrong with my computer and not the iPod itself.
Now for the long-winded story of the last eight hours of my life...
I just got the Generation-5 iPod Video (60GB) a today and I'm having problems already. I followed the instructions and installed the iPod software and then plugged in my iPod (iTunes has been on my computer for a while now). I was expecting iTunes to open after plugging in the iPod, but my device manager only detected and installed "a new device". I manually opened iTunes and got an error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
After re-installing the iPod software and iTunes, and restarting my computer countless times, I came looking for help here. I found this page, which seemed to outline my problem exactly. My computer recognizes the iPod as a drive, but iTunes won't have anything to do with it. I have all the symptoms outlined in the heading, so I hoped to solve my problem there. I followed the instructions step-by-step, and after the final restart, I open iTunes to get the same exact error message.
I decided to determine whether there was a problem with my iPod or if it was my computer. I plugged my iPod into my uncles's powerbook, and got to the point where I can name and configure my iPod. I expected it to work flawlessly on a Mac (which it did) but there is no way for me to continue using a Mac (after tomorrow) for my iPod. This formatted the iPod for a Mac, so I went to another (different from the original) Windows computer, clean of any iTunes and iPod software, and followed the instructions exactly as they're supposed to be followed. After the installations, I plugged in my iPod, and although iTunes didn't open, I was able to format back to Windows and name my iPod (a step in the right direction). I should note that my (anti-iPod) computer is a Windows XP Pro, and the working one is Windows XP Home Edition. This was all well and good, until I remembered there was no music on this computer. So my iPod is completely working there, but there isn't anything I can do with it.
Next, I came back here and browsed around the discussion boards, hoping to find somebody with a similar problem to mine. There seems to be alot of errors concerning iTunes not recognizing the iPod, but none of the solutions I tried worked for me, including changing the drive letter. I get the "iPod Service Error" while trying to restore to factory settings through iPod updater.
Of course, I could transfer all 32GB of music from one computer to another, but the second (working) computer isn't mine and I won't have access to it in a couple months. It would be most convenient if I could get my iPod working on my own computer. Any help would be appreciated, especially from somebody who has solved this problem or know how to solve this problem.
P.S.
Here are some other minor details that my be important, but I didn't feel they were worth including.
- My brother has his iPod mini set up on my computer, under a different user login. He gets the same error once in a while, but re-installing iTunes always solves the problem for him. I had him try solving my problem his way, but nothing worked for him either.
- My computer is an AMD Athlon 64 Processor 3200+, 512MB RAM with Windows XP Pro SP2 installed. My internal hard drive is partitioned, using the letters C, D and H (C being my system files, D used for recovery files and H for my applications and games). My E drive is used as a DVD/CD-ROM Drive, and drives F and G are reserved for virtual drives (none have been running during this entire ordeal). My external hard drive uses the letter I, and I manually set my iPod to use the letter J (I've never used 'J' for anything else before).
- Yes, I have downloaded and installed the latest versions of iTunes and the iPod software.
- I'm assuming there is a problem with my computer and not my iPod, since it worked on both other computers I tried. I'm hoping it's as simple as changing a registry file or cleaning out (yet another) temp directory.

Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
I think that's all that's required, but I also searched through the registry and deleted the following keys.
4. Other keys I deleted:
4.1 HKEYCLASSESROOT --> IPodManager.IPodManagerUI.1
4.2 HKEYLOCALMACHINE --> SOFTWARE --> Apple Computer Inc. --> iPod
I think that's all I deleted, but I'm not positive. I seached for instances of "ipod" using the Find... and Find Next functions under the Edit menu.
5. Exit out of the registry editor.
6. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark

SOLUTION to "Software required for communicating with the iPod is not insta

Folks, I can not take credit for this.....you should send your checks to MarkinMadison. I've included his post in it's entirety. For me, this was the Holy Grail !!
My only comment is make sure when you are in the registry that you hit the "apply" button to change and add things.
This probably won't solve everyone's problem but it clearly solved mine (and I tried all other "solutions"), as well as Mark's.
Apple: please find out who MarkinMadison is and either cut him a big check or offer him free Ipods for life.
"Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Click the checkbox that says: "Replace owner on subcontainers and objects."
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
3.7 If you can't delete, you might need to open up the keys and repeat the procedure on the sub-keys.
4. Exit out of the registry editor.
5. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark"
Dimension 4600 Windows XP

I have also posted the same question, earlier today. I purchased two for my children and cannot get the iPod to communicate with the computer. I have the iTunes software on my system, but during the installation process I cannot click the NEXT button, once I plug the iPod cable in. The computer does not detect it. I have tried all 6 USB 2.0 ports. I even removed the Dell Jukebox and MusicMatch programs. I am not a computer savvy person - just a mom who wants to give these to my children for Christmas. This is the first "chat" site I have even registered on. I am so very frustrated. Hopefully, this can be resolved.

IPod Not Recognized in iTunes & "Software Required for Commun with iPod. .

Pleasse help! I have about 15 hours invested in this problem, includes 2.5 hours with Apple Technicians, and no help.
I have a new 30G Video iPod that isn't detected in iTunes, although I can see it in exlorer and listed as my G drive. The error message that appears when I start iTunes is,
"The software required for communicating wihtthe iPod is not installed correctly. Please reinstall iTunes to install the iPod software."
I have done the "5 R's" about 8 times, and tried other things including changing the drive letter, unintalling Norton, using the msconfig to limit what was running (per the Apple site directions), removed the temp files (per the Apple site directions, "soft reboots" of the iPod (Menu and round button holds), manually running "C:\Program Files\iPod\bin\iPodService.exe" from the RUN menu, and running regsvr32 c:\windows\system32\atl.dll (per the Apple Tech) from the RUN menu.
A few other notes, 1) in MSCONFIG, my iPod service does not seem to want to run, it shows as "stopped" 2)I had initally installed the iPodUpdater 2005-10-12, which didn't get me connected, and then later updated to 2005-11-17, which still didn't work. I have also installed from scratch from the apple site. When I try to run the Updater, my error reads "iPod Service Error". I don't even understand what this is supposed to do. Perhpas update the iPod software iteself?
When I connect to the other PC in my home, which was loaded with the same Windows CD's, iTunes fires right away and detects this iPod.
On the PC I am trying to coneect with, I have previously had a successful setup with an iPod mini, but now that doesn't work anymore either.
Apples next step is telling me to uninstall/reinstall Windows. This seems like a pretty drastic, and even more time consuming step . . . one that I'd rather not take unless it is fairly certain to resolve this problem
ANY SUGGESTIONS????
Thank you in advance.
iPod 30G Video / Gateway PC Windows XP Service Pack II

Thank you. I'm new to this and will repost.
Gateway Windows XP Service Pack II

Transfer Requirement for Goods Receipt Item

Hi All,
We are trying to create Transfer Order for Goods Receipt items using an ITS mobile application.We are using the function module L_TO_CREATE_TR to create Transfer Order by passing the Transfer Requirement from the Goods Receipt as an input to the function module. Our requirement is to create one Transfer Orde per Goods Receipt item. We need to create Transfer Order for the items simulatneously from different terminals.Since we have only one Transfer Requirement for the entire Goods Receipt document, we are not able to create Transfer Orders simultaneously because of the system lock (Transfer Requirement is locked).
Is it possible to create separate Transfer Rquirement for the individual items in the Goods Receipt via customizing/User exit.
Your guidance in this regard will be great help for us.
Regards,
Shaju

Hi Dirk,
Thank you for your reply.
Our enduser will be using handheld device for Transfer Order creation. The user will pick the GR item material from one storage type (902) and the Transfer Requirement will be locked at this moment.Later while placing the SU in destination bin the user will scan the destination bin and the Transfer Order will be created at the time of scanning. Till the completion of the entire process the Transfer Requirement will be locked and no one else can pick the materials of the same GR from 902 storage type.
We are trying to create Transfer Requirements for each Goods Receipt Item and we are not able to find any user exit in Goods Receipt Creation or any customizing option.
Can you please check and help us to resolve the same.
Regards,
Shaju
Edited by: shaju tv on Apr 5, 2010 11:40 AM

Java.rmi.UnmarshalException: skeleton class not found but required for clie

Hello everyone,
I am new to RMI and getting a strange exception. I am using Java 1.5.0_07 both on client and server. They are running on the same machine, the rmi registry is started inside the server application.
I am wondering why java complains about skeletons, I thought they are automatically created when using java 5.0?
Please have a look at the stacktrace below.
Thank you for your help.
Best Regards
Patric
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
     java.rmi.UnmarshalException: error unmarshalling call header; nested exception is:
     java.rmi.UnmarshalException: skeleton class not found but required for client version
     sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:325)
     sun.rmi.transport.Transport$1.run(Transport.java:153)
     java.security.AccessController.doPrivileged(Native Method)
     sun.rmi.transport.Transport.serviceCall(Transport.java:149)
     sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
     sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
     java.lang.Thread.run(Thread.java:595)
     sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
     sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
     sun.rmi.server.UnicastRef.invoke(UnicastRef.java:343)
     sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
     java.rmi.Naming.lookup(Naming.java:84)
     org.apache.jsp.index_jsp._jspService(index_jsp.java:58)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

The full class path information that I can gather is as follows (some of the library path locations could be suspect...):
Class path: /edge/node3/hotfix::/edge/node3/current/lib/JMdsApi.jar:/edge/node3/current/lib/MemoryProfilingAgent.jar:/edge/node3/current/lib/T2common-2.6.0-SNAPSHOT.3200.jar:/edge/node3/current/lib/T2scripting-jython.jar:/edge/node3/current/lib/activation.jar:/edge/node3/current/lib/alib.jar:/edge/node3/current/lib/alibom.jar:/edge/node3/current/lib/ant.jar:/edge/node3/current/lib/authapi.jar:/edge/node3/current/lib/bbdlapi.jar:/edge/node3/current/lib/bcpg-jdk15-136.jar:/edge/node3/current/lib/bcprov-jdk15-136.jar:/edge/node3/current/lib/c3p0-0.9.1.2.jar:/edge/node3/current/lib/castor-1.1-codegen-anttask.jar:/edge/node3/current/lib/castor-1.1-codegen.jar:/edge/node3/current/lib/castor-1.1-xml.jar:/edge/node3/current/lib/castor-1.1.jar:/edge/node3/current/lib/colt-1.2.0.jar:/edge/node3/current/lib/common-annotations.jar:/edge/node3/current/lib/commons-beanutils.jar:/edge/node3/current/lib/commons-codec-1.3.jar:/edge/node3/current/lib/commons-collections-3.2.1.jar:/edge/node3/current/lib/commons-jexl-1.1.jar:/edge/node3/current/lib/commons-lang-2.3.jar:/edge/node3/current/lib/commons-logging-1.1.1.jar:/edge/node3/current/lib/commons-net-1.4.1.jar:/edge/node3/current/lib/dsn.jar:/edge/node3/current/lib/eagleapi.jar:/edge/node3/current/lib/ezmorph-1.0.3.jar:/edge/node3/current/lib/f2-loader-1.8.jar:/edge/node3/current/lib/fasttrade-boviewer-1.0.1.jar:/edge/node3/current/lib/hsqldb.jar:/edge/node3/current/lib/icu4j-3.4.4.jar:/edge/node3/current/lib/ivy.jar:/edge/node3/current/lib/janino.jar:/edge/node3/current/lib/janus-sdk-1.7.0.0.jar:/edge/node3/current/lib/jasypt-1.4.1.jar:/edge/node3/current/lib/javolution.jar:/edge/node3/current/lib/jcalendar-1.3.2.jar:/edge/node3/current/lib/jcl-over-slf4j-1.5.6.jar:/edge/node3/current/lib/jcommon-1.0.9.jar:/edge/node3/current/lib/jconn2.jar:/edge/node3/current/lib/jconn3-6.05-b26214.jar:/edge/node3/current/lib/jdom.jar:/edge/node3/current/lib/jfreechart-1.0.5.jar:/edge/node3/current/lib/jgroups-all.jar:/edge/node3/current/lib/jline.jar:/edge/node3/current/lib/jmkv123p1.jar:/edge/node3/current/lib/jna.jar:/edge/node3/current/lib/joda-time-1.5.2.jar:/edge/node3/current/lib/jscience.jar:/edge/node3/current/lib/json-lib-2.2.1-jdk15.jar:/edge/node3/current/lib/jul-to-slf4j-1.5.6.jar:/edge/node3/current/lib/junit.jar:/edge/node3/current/lib/jython.jar:/edge/node3/current/lib/log4j-1.2.15.jar:/edge/node3/current/lib/log4j-over-slf4j-1.5.6.jar:/edge/node3/current/lib/loggablePreparedStatement-1.6.jar:/edge/node3/current/lib/looks-2.1.4.jar:/edge/node3/current/lib/mailapi.jar:/edge/node3/current/lib/model-12021.jar:/edge/node3/current/lib/mysql-connector-java-5.1.7-bin.jar:/edge/node3/current/lib/opencsv-1.8.jar:/edge/node3/current/lib/rfa.jar:/edge/node3/current/lib/rspcore.jar:/edge/node3/current/lib/slf4j-api-1.5.6.jar:/edge/node3/current/lib/slf4j-log4j12-1.5.6.jar:/edge/node3/current/lib/smtp.jar:/edge/node3/current/lib/smtphandler-0.6.jar:/edge/node3/current/lib/spring-2.5.2.jar:/edge/node3/current/lib/statsvn.jar:/edge/node3/current/lib/swingx-0.9.3.jar:/edge/node3/current/lib/t2-12021.jar:/edge/node3/current/lib/testng-5.9-jdk15.jar:/edge/node3/current/lib/tibmsg.jar:/edge/node3/current/lib/tibrvj.jar:/edge/node3/current/lib/trove.jar:/edge/node3/current/lib/velocity-tools.jar:/edge/node3/current/lib/velocity.jar:/edge/node3/current/lib/xalan.jar:/edge/node3/current/lib/xerces.jar:/edge/node3/current/lib/patng/activeio-core-3.0.0-incubator.jar:/edge/node3/current/lib/patng/activemq-core-4.1.1.jar:/edge/node3/current/lib/patng/avalon-framework-4.1.3.jar:/edge/node3/current/lib/patng/backport-util-concurrent-2.2.jar:/edge/node3/current/lib/patng/binding-1.4.0.jar:/edge/node3/current/lib/patng/cglib-nodep-2.1_3.jar:/edge/node3/current/lib/patng/common-1.30.jar:/edge/node3/current/lib/patng/commons-cli-1.0.jar:/edge/node3/current/lib/patng/commons-configuration-1.2.jar:/edge/node3/current/lib/patng/commons-discovery-0.2.jar:/edge/node3/current/lib/patng/commons-math-1.1.jar:/edge/node3/current/lib/patng/concurrent-1.3.4.jar:/edge/node3/current/lib/patng/geronimo-j2ee-management_1.0_spec-1.0.jar:/edge/node3/current/lib/patng/geronimo-jms_1.1_spec-1.0.jar:/edge/node3/current/lib/patng/logkit-1.0.1.jar:/edge/node3/current/lib/patng/mina-core-1.0.1.jar:/edge/node3/current/lib/patng/mina-filter-ssl-1.0.1.jar:/edge/node3/current/lib/patng/mina-java5-1.0.1.jar:/edge/node3/current/lib/patng/mx4j-remote-3.0.1.jar:/edge/node3/current/lib/patng/mx4j-tools-3.0.1.jar:/edge/node3/current/lib/patng/org.apache.felix.framework-1.0.0.jar:/edge/node3/current/lib/patng/org.osgi.core-1.0.0.jar:/edge/node3/current/lib/patng/pat-dt-common-1.18.jar:/edge/node3/current/lib/patng/pat-sdt-1.18.jar:/edge/node3/current/lib/patng/patNg-api-1.27.1.jar:/edge/node3/current/lib/patng/patNg-server-aoc-1.21.jar:/edge/node3/current/lib/patng/patNg-server-common-1.21.jar:/edge/node3/current/lib/patng/patNg-server-session-manager-1.21.jar:/edge/node3/current/lib/patng/patNg-utils-1.27.1.jar:/edge/node3/current/lib/patng/qpid-broker-2.2.2.0.jar:/edge/node3/current/lib/patng/qpid-client-2.2.2.0.jar:/edge/node3/current/lib/patng/qpid-common-2.2.2.0.jar:/edge/node3/current/lib/patng/qpid-mina-core-2.2.2.0.jar:/edge/node3/current/lib/patng/rsee-2.11.jar:/edge/node3/current/lib/patng/servlet-api-2.3.jar:/edge/node3/current/lib/patng/silk-1.3.jar:/edge/node3/current/lib/patng/slf4j-api-1.4.0.jar:/edge/node3/current/lib/patng/slf4j-log4j12-1.4.0.jar:/edge/node3/current/lib/patng/validation-1.2.0.jar
Boot class path: /apps/jdk/1.6.0_13/linux/jre/lib/resources.jar:/apps/jdk/1.6.0_13/linux/jre/lib/rt.jar:/apps/jdk/1.6.0_13/linux/jre/lib/sunrsasign.jar:/apps/jdk/1.6.0_13/linux/jre/lib/jsse.jar:/apps/jdk/1.6.0_13/linux/jre/lib/jce.jar:/apps/jdk/1.6.0_13/linux/jre/lib/charsets.jar:/apps/jdk/1.6.0_13/linux/jre/classes:/tmp/yjp200811122006.jar
Library path: /apps/jdk/1.6.0_13/linux/jre/lib/i386/server:/apps/jdk/1.6.0_13/linux/jre/lib/i386:/apps/jdk/1.6.0_13/linux/jre/../lib/i386::/edge/node3/current/lib:/home/eqdev/eqedgeuat/yourkit_7_5_11/yjp-7.5.11/bin/linux-x86-32:/edge/node3/current/lib:/home/eqdev/eqedgeuat/yourkit_7_5_11/yjp-7.5.11/bin/linux-x86-32:/usr/java/packages/lib/i386:/lib:/usr/lib

David Powers Lesson10 - 'doesn't meet the requirements for an image'

Hi,
I have a problem to upload image in lesson10. It always show the error message of 'doesn't meet the requirements for an image' even the image size, width and height meet the validation. Below is upload_images.php
My upload file size is 160K with width 640 pixels and height 480 pixels. Please help. Thank You.
upload_images.php
<?php
$uploader = new Zend_File_Transfer_Adapter_Http();
$uploader->setDestination($destination);
$uploader->setOptions(array('ignoreNoFile' => TRUE));
$files = $uploader->getFileInfo();
$filenum = 1;
foreach ($files as $file => $info) {
$file = "photo{$filenum}";
$caption = $_POST["caption{$filenum}"];
if (isset($_POST["place_id{$filenum}"])) {
    $place_id = $_POST["place_id{$filenum}"];
} else {
    $place_id = NULL;
$filenum++;
if ($uploader->isUploaded($file)) {
          $filename = $uploader->getFileName($file, FALSE);
          $uploader->addValidator('Size', FALSE, '500kB');
          $uploader->addValidator('MimeType', FALSE, 'image');
          $uploader->addValidator('ImageSize', FALSE, array('minheight' => 50, 'minwidth' => 100));
          if (!$uploader->isValid($file)) {
            $errors[$filename] = "$filename doesn't meet the requirements for an image";
          } else {
            $no_spaces = str_replace(' ', '_', $filename, $renamed);
            $uploader->addValidator('Extension', FALSE, 'gif, png, jpg');
            $recognized = FALSE;
            if ($uploader->isValid($file)) {
                    $recognized = TRUE;
            } else {
                    $mime = $uploader->getMimeType($file);
                    $acceptable = array('jpg' => 'image/jpeg' ,
                                                                      'png' => 'image/png',
                                                                      'gif' => 'image/gif');
                    $key = array_search($mime, $acceptable);
                    if (!$key) {
                      $errors[$no_spaces] = "$filename is an unrecognized image type";
                    } else {
                      $no_spaces = "$no_spaces.$key";
                      $recognized = TRUE;
                      $renamed = TRUE;
            if ($recognized) {
                    // get the names of existing files
                    $existing = scandir($destination);
                    // check if the name of the uploaded file is in the array
                    if (in_array($no_spaces, $existing)) {
                      // get the position of the final period
                      // use it to get the base name and extension
                      $dot = strrpos($no_spaces, '.');
                      $base = substr($no_spaces, 0, $dot);
                      $extension = substr($no_spaces, $dot);
                      // initialize a counter
                      $i = 1;
                      // use a loop to add the counter after the base name
                      // check whether the new name exists in the array
                      do {
                              $no_spaces = $base . '_' . $i++ . $extension;
                      } while (in_array($no_spaces, $existing));
                      // set $renamed to TRUE
                      $renamed = TRUE;
                    $uploader->clearValidators();
                    $uploader->addFilter('Rename', array('target' => $no_spaces, $info['tmp_name']));
                    $success = $uploader->receive($file);
                    if (!$success) {
                      $errors[$no_spaces] = implode('. ', $uploader->getMessages());
                    } else {
                      $uploaded = "$filename uploaded successfully";
                      if ($renamed) {
                              $uploaded .= " and renamed $no_spaces";
                      $images[] = array('filename' => $no_spaces,
                    'caption' => $caption,
                    'place_id' => $place_id);
                      $messages[] = $uploaded;

I solved it finally. For your infor, I'm using php version is 5.4.3 and MAMP 2.2. Here are the changes:
1) Open php.ini
    Look for 'extension=php_fileinfo.dll' and remove ;
2) Download GNU file package for windows from http://gnuwin32.sourceforge.net/downlinks/file-bin-zip.php.
    Extract the zip file.
3) Copy 2 file from the extract folder ../share/file/magic and ../share/file/magic.mgc and paste in folder php/extra/magic
     folder. (Create the magic folder as new folder).
4) Stop MAMP all services and start services again.
This will work for you !

Hardware requirement for Oracle Universal Content Management

Hi Experts,
What are the Hardware requirements for Oracle Universal Content Management ?
Regards
Nasir

does this help?
Oracle WebLogic Server 11g (10.3.3) System Requirements
Oracle WebLogic Server supports a number of platforms including:
– Linux
– Sun Solaris
– HP-UX
– Windows 2000, 2003 Server, XP
• Processor:
– At least one 1 GHz CPU is recommended.
– Intel and UNIX processors are supported.
• Hard disk drive:
– A full installation requires approximately 2 GB of disk space.
– The Linux value for file descriptors must be 4096 or greater.
– Samples are optional (download from OTN).
• Memory:
– A minimum of 2 GB RAM is recommended for WebLogic
Server.
– Consider the number of simultaneous users and sessions.
– Consider in-memory programs, such as Coherence.
System Requirements
The following are some of the basic system requirements for Oracle WebLogic Server 10.3.3:
• The Oracle WebLogic Server installer requires a Java Runtime Environment (JRE) to run.
Oracle WebLogic Server is certified with JDK6.0. As part of the installation, it gives the option
to install the JRockit JDK 6.0 version. As part of postinstallation, prefix the bin directory of
the JDK to the PATH environment variable.
• The Oracle WebLogic Server installer requires a temporary location in which to unpack the
files. Typically, the installer requires approximately 2.5 times the amount of temporary space
that is required by the installed files.
Note: In this release of WebLogic Server, users can choose which components of WebLogic Server
they use. Specifically, this release allows users to choose whether the Enterprise JavaBeans (EJB),
Java Message Service (JMS), and J2CA services are started when WebLogic Server is started. The
benefit of excluding some services is reduced memory footprint and reduced startup time.

Hardware Requirements for OC4J and Oracle DB

Hi,
I'm looking for some information about hardware requirements for a server that will run a Oracle DB and OC4J. It will be used for training purpose (about 10 people) and for running small apps using ADF.
Does anybody knows how much hardware I need?
Is there any documents from Oracle for hardware requirements?
Any help appreciated. Thanks

Greetings,
We routinely develop and test on a Dell Vostro laptop with OS Windows XP and 4GB RAM. The key is to either run the Oracle db in a VM (10.2.0.1) with at least 0.5 GB RAM for the VM or use the XE db. I personally prefer the XE db as it is lightweight and easily configured or uninstalled. As far as oc4j is concerned, a lot can be done to improve the efficiency by modifying the oc4j.cmd file in driveletter:/oc4j/bin:
set JVMARGS=-Xmx512m -XX:-UseGCOverheadLimit -server -XX:MaxPermSize=256m -Dclass.load.trace=class-not-found -Dclass.load.log.level=finestThe JVM args settings are fully explained at:
http://java.sun.com/javase/technologies/hotspot/vmoptions.jsp-Michael
Edited by: Michael F. Hardy on Jan 28, 2009 7:20 AM

Tmp space requirement for essbase 7 install

Is there any minimum requirement for tmp space when we install Essbase. <BR>when I try to install ie run the ./setup.bin (XWindows mode) .The installer does not give an error but waits and when I check the /tmp file it is getting filled up .There is only 60 MB space allocated to /tmp file . Is there any requirement for the /tmp space and if yes how much is minimum needed.<BR><BR>Thank you for your suggestions

Hi,
As per the installation guide:
Space for EHPI Directory: 15GB   -on the AS host
Free space on database: 50GB (Better to keep 90-100GB free)    -on the DB host
Shadow system instance: approx same size as that of the source release instance directory /usr/sap/<SID>   -on the AS host
The shadow instance is installed as a copy of the original instance, in parallel. The shadow system is used to update the affected software components and to install the additional components, while the original system is still in production operation.
Regards,
Srikishan

Kernel requirements for HPLIP (not working) [SOLVED]

My printer (connected to the network through my router with a static ip address) used to work fine with HPLIP and CUPS. When I last tested, I was (and am) using a custom-compiled zen kernel; the relevant modules that I compiled (separately, not into the kernel) are plip, ppdev, and parport. I am guessing that it is a combination of package upgrades and my custom kernel that is causing the problem below:
My printer is detected by CUPS, and I can see it on localhost:631. When I send jobs to it, it begins "processing" them, then hangs on a (to-print) page and I see the message
/usr/lib/cups/backend/hp failed
I deleted the printer from CUPS and re-added using
sudo hp-setup
The process goes just fine, with hp-setup only throwing a warning about how dbus must be running for the PC to fax (with which I am not concerned).
When I run hp-testpage, I get this:
redscare:~> hp-testpage
warning: python-dbus not installed.
HP Linux Imaging and Printing System (ver. 3.9.12)
Testpage Print Utility ver. 6.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Using printer: Officejet_6500_E709n
warning: Qt/PyQt 4 initialization failed.
error: hp-testpage -u/--gui requires Qt4 GUI support. Entering interactive mode.
error: Unable to communicate with device (code=12): hp:/net/Officejet_6500_E709n <-- This line is important?
error: Unable to print to printer. Please check device and try again.
note: If an error occured, or the test page failed to print, refer to the HPLIP website
note: at: http://hplip.sourceforge.net for troubleshooting and support.
Thanks in advance for your help
Last edited by RedScare (2010-01-08 01:27:28)

I didn't have python-dbus installed, which I did. hp-check -t still throws some errors, but I don't see how they are related to the printer not working (more scanning-related issues). Here's the new output of hp-check -t:
Initializing. Please wait... \
| SYSTEM INFO |
Basic system information:
Linux redscare 2.6.32-ZEN #1 ZEN SMP PREEMPT Tue Jan 5 20:30:35 EST 2010 x86_64 Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz GenuineIntel GNU/Linux
Distribution:
unknown 0.0
Checking Python version...
OK, version 2.6.4 installed
Checking PyQt 4.x version...
error: NOT FOUND OR FAILED TO LOAD!
Checking for CUPS... Status: scheduler is running Version: 1.4.2
error_log is set to level: warn
Checking for dbus/python-dbus... dbus daemon is running.
python-dbus version: 0.83.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: SANE - Scanning library...
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: scanimage - Shell scanning program...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.9.12 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.9.12
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.9.12
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=yes
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.9.12.29
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = BlackPrinter
device_uri = hp:/net/Officejet_6500_E709n?zc=PRINTER
[installation]
version = 3.9.8.36
date_time = 10/15/09 23:29:55
| DISCOVERED USB DEVICES |
No devices found.
| INSTALLED CUPS PRINTER QUEUES |
BlackPrinter
Type: Printer
Device URI: hp:/net/Officejet_6500_E709n?zc=PRINTER
PPD: /etc/cups/ppd/BlackPrinter.ppd
PPD Description: HP Officejet 6500 e709n, hpcups 3.9.12 Printer status: printer BlackPrinter is idle. enabled since Wed 06 Jan 2010 04:26:39 PM EST
error: Unable to communicate with device (code=12): hp:/net/Officejet_6500_E709n?zc=PRINTER
error: unable to open channel
error: Communication status: Failed
BlackPrinterFax
Type: Fax
Device URI: hpfax:/net/Officejet_6500_E709n?zc=PRINTER
PPD: /etc/cups/ppd/BlackPrinterFax.ppd
PPD Description: HP Fax hpcups Printer status: printer BlackPrinterFax is idle. enabled since Wed 06 Jan 2010 04:26:57 PM EST
error: Unable to communicate with device (code=12): hpfax:/net/Officejet_6500_E709n?zc=PRINTER
error: unable to open channel
error: Communication status: Failed
| SANE CONFIGURATION |
'hpaio' in '/etc/sane.d/dll.conf'...
error: '/etc/sane.d/dll.conf' not found. Is SANE installed?
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for the proper installation of scanext.
|
| USER GROUPS |
root bin daemon sys adm disk wheel log
| SUMMARY |
error: 13 errors and/or warnings.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.

Are SUID and SGID required for oracle functionlities?

Could anyone please confirm that the below oracle files and their permissions SUID and SGID are valid (and actually required) for oracle functionality? Thanks.
SUID binary /opt/oracle/11.2.0/bin/extjob
SUID binary /opt/oracle/11.2.0/bin/oradism
SUID binary /opt/oracle/11.2.0/bin/oracle
SUID binary /opt/oracle/11.2.0/bin/nmb
SUID binary /opt/oracle/11.2.0/bin/nmo
SUID binary /opt/oracle/11.2.0/bin/emtgtctl2
SUID binary /opt/oracle/11.2.0/bin/nmhs
SUID binary /opt/oracle/11.2.0/bin/jssu
SUID binary /opt/ORCLfmap/prot1_64/bin/fmputlhp
SGID binary /opt/oracle/11.2.0/bin/oracle
SGID binary /opt/oracle/11.2.0/bin/emtgtctl2

Fresh installation of 11.2
ll extjob oradism oracle nmb nmo emtgtctl2 nmhs jssu fmputlhp
-rwsr-s--x 1 oracle oinstall     66239 Jun 2 2013 emtgtctl2
-rwsr-x--- 1 root   oinstall   1223782 Jun 2 2013 extjob
-rwsr-x--- 1 root   oinstall     43514 Jun 2 2013 jssu
-rws--x--- 1 root   oinstall     34198 Jun 2 2013 nmb
-rws--x--- 1 root   oinstall     71524 Jun 2 2013 nmhs
-rws--x--- 1 root   oinstall     45157 Jun 2 2013 nmo
-rwsr-s--x 1 oracle oinstall 201099176 Jun 2 2013 oracle
-rwsr-x--- 1 root   oinstall     68278 Aug 14 2009 oradism
-rwxr-x--- 1 oracle oinstall     35300 Aug 14 2009 fmputlhp
ll /opt/ORCLfmap/prot1_64/bin/fmputlhp
-r-sr-xr-x 1 root root 35300 Jun 2 2013 /opt/ORCLfmap/prot1_64/bin/fmputlhp

S/W & H/W requirement for Oracle9i RAC on Win 2003

Dear Sir,
I have Windows 2003 & Oracle 9i Ent S/W in place. I want to implement a 2 NODE RAC for loadbalance & also want to have Dataguard with it for DR. Please let me know what all S/W & what type of H/W are required for implementing this setup. Please let me know where i can reduce the cost since the budget is restricted.
Thanks & Regards.

Hi Aryanadonis ,
Thanks for posting here
According what you mentioned, I thought system can’t located command programs path when you perform this command .
Seems that you can perform these command with assign path, what I thought is this issue occurred because wrong environment variable setting.
I noticed that you have posted the Environment Variable result here, I checked and highlight wrong values that could cause this issue. please correct it and try perform
command again.
C:\WINDOWS;
C:\WINDOWS\system32;
C:\WINDOWS\system32\\wbem;
C:\PROGRA~1\CSCOpx\objects\smarts\lib;
C:\PROGRA~1\CSCOpx\objects\smarts\bin;
C:\PROGRA~1\CSCOpx\campus\bin;
C:\PROGRA~1\CSCOpx\MDC\tomcat\bin;
C:\PROGRA~1\CSCOpx\MDC\Apache;
C:\PROGRA~1\CSCOpx\MDC\Apache\bin;
C:\PROGRA~1\CSCOpx\MDC\jre\bin;
C:\PROGRA~1\CSCOpx\MDC\bin;
C:\PROGRA~1\CSCOpx\lib\jre\bin\server;
C:\PROGRA~1\CSCOpx\objects\db\win32;
C:\PROGRA~1\CSCOpx\bin;
C:\WINDOWS\system32\\wbems\smarts\binPROGRA~1\CSCOpx\MDC\ApacheOGRA~1\CSCOpx\lib\jre\bin\serverCOpx\lib\jrebin\serveremRoot%\System32\Wbem;
C:\Other Programs\net snmp\bin
This article below introduce how to modify environment variables in windows XP , but you may also reference to it and modify environment variable on you windows 2003:
How To Manage Environment Variables in Windows XP
http://support.microsoft.com/kb/310519
Thanks.
Tiger Li
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Table for temporarily stock /requirement for tocde /afs/mdo4

Dear expart,
I developed a zreport for display STO number, Production order number, operation etc.
mainly I use here AFPO,AFRU, MSEG, MCHB & J_3ABDSI Table.
My problem is, when I compare with Tcode /afs/md04 tab-temporarily stock /requirement .
for some MATNR
data show properly.
and some MATNR are blank with message Last MRP run on 04.04.2011 or such date.
Hhow i can filter the in Z-report which MATNR are not in Tcode /afs/md04 tab-temporarily stock /requirement .
my code is.
SELECT j_3abdsiaufnr j_3abdsimatnr j_3abdsij_4krcat j_3abdsimbdat j_3abdsi~menge INTO TABLE it_eket FROM j_3abdsi
    FOR ALL ENTRIES IN it_final1
    WHERE
          j_3abdsi~j_4krcat = it_final1-j_4ksca AND
          j_3abdsi~matnr = it_final1-matnr AND
          j_3abdsi~werks = it_final1-werks AND
          j_3abdsi~bdart = 'TB' AND
          j_3abdsi~plart = 'B' AND
          j_3abdsi~bsart = 'UB'.
Pls help .
Rayhan
Edited by: Abu Rayhan on Apr 5, 2011 10:24 AM

CLEAR i_data1.
REFRESH i_data1.
LOOP AT i_mara.
    READ TABLE i_marc WITH KEY matnr = i_mara-matnr BINARY SEARCH .
    IF sy-subrc = 0 .
      CALL FUNCTION 'J_3AM_DISPOSITION_DISPL'
        EXPORTING
          i_matnr                 = i_mara-matnr
          i_werks                 = p_werks
      I_DIALOG                = ' '
      I_SPERR                 = ' '
      I_AUFRUF                = ' '
      I_BANER                 = ' '
         i_todate                = todate
      I_HEADER_ONLY           = ' '
       IMPORTING
         ex_dbba                 = i_data3
      E_MDKP                  =
      EX_PBBD                 =
      EX_MELD                 =
      E_CM61M                 =
       EXCEPTIONS
         material_gesperrt       = 1
         wbz_fehler              = 2
         material_prgr           = 3
         dispo_gesperrt          = 4
         OTHERS                  = 5
      IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ELSE.
        IF i_data3[] IS NOT INITIAL.
          LOOP AT i_data3 INTO i_data4 .
              IF ( i_data4-j_3astat ='A' OR i_data4-j_3astat ='T') AND i_data4-j_3abskz ='C'   .
                READ TABLE i_t001l WITH KEY lgort = i_data4-lgonr BINARY SEARCH .
                IF sy-subrc = 0 .
                  CLEAR i_data1str.
                  i_data1str-matnr = i_data4-matnr.
                  i_data1str-j_3asize = i_data4-j_3asize .
                  i_data1str-lgort = i_data4-lgonr.
                  i_data1str-menge = i_data4-menge .
                  COLLECT i_data1str INTO i_data1.
                ENDIF.
              ENDIF.
          ENDLOOP.
        ENDIF.
      ENDIF.
ENDLOOP.
Questions
i_mara recordset 500 material
It take more than 3 house to finished this report.
do changed ?
do you help me ?
Think.

What are the settings required for QM in procurement

Hi Team,
What are the settings required for QM in procurement. I have set indicator for QM in procurement in QM view in material master.
I am not clear about following fields to be maintained in QM view.
QM Control Key
Certificate type
Target QM system
Tech. delivery terms Indicator.
Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
Thanks

Hi,
All meaning are
QM Control Key :
If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
Certificate type :
Certificate types applies to the Certificate processing in procurement & Certificate creation
Target QM system :
whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
- If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
- If you want Vendor's perticular certificate for Material then you have to define Certificate type.
Also, you have to maintain Material, Vendor's Info record at plant level.
Thanks,
JM

Requirement for bin

Similar Messages

Maybe you are looking for