Requirement on managed system

Hi All,
We have installed Solution Manager Ehp1. We are unable to find the prerequisites for the satellite system after following many notes mentioned below i am confused .
I have followed these notes (Note u2013 1010428, 1274287, 1228898,539977,69455).
Following scenarios should be performed on your SAP Solution Manager with the Managed Systems
Setup of WorkCenter and Downtime Manager along with Downport , Root Cause Analysis/ SMD
Can you suggest patch requirement on managed System ?
ST-PI,ST-A/PI, SAP Basis, SAP ABAP .
Clientu2019s Backend R/3 is on 6.20 SAP_BASIS SP60
We will appreciate your help
Thanks,
shashi

>
Shashi Prakash Singh wrote:
> We have installed Solution Manager Ehp1. We are unable to find the prerequisites for the satellite system after following many notes mentioned below i am confused .
> I have followed these notes (Note u2013 1010428, 1274287, 1228898,539977,69455).
>
> Following scenarios should be performed on your SAP Solution Manager with the Managed Systems
> Setup of WorkCenter and Downtime Manager along with Downport , Root Cause Analysis/ SMD
>
>
> Can you suggest patch requirement on managed System ?
> ST-PI,ST-A/PI, SAP Basis, SAP ABAP .
>
> Clientu2019s Backend R/3 is on 6.20 SAP_BASIS SP60
As a first answer:
[FAQ Diagnostics: Installation and Configuration - 10. Which limitations exist in terms of supporting lower releases on the managed system side?|http://service.sap.com/~sapdownload/011000358700000737542007E/#A54]
Implement latest available version of ST-PI and ST-A/PI.
Ruediger

Similar Messages

Manage Systems in other child domain through sccm server placed in another child domain.

Hi,
We have single forest , multiple domain AD structure. There is full trust between the child domains.
We have a requirement to manage systems in another child domain. the admin account is placed in one of the child domain, where the SCCM Server is also installed.
I tried placing LDAP query for other child domain in AD system discovery method., but it shows the attached error.
Pls. help

Hi,
Have you granted the admin account permissions to read computer accounts in the other Child Domain? do the Primary Site servers computer account have permissions to read computer account information in the other child domain? Otherwise it will not work..
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

System requirements of Fleet Management System

Hi,
What are the system requirements to activate the Fleet Management System? Will it also need another license?

Hi,
which Szenario are you planning to implement? In regards to licensing I would recommend to contact your SAP sales contact.
Best regards,
Claudia

Requirements for SAP Document management system in ECC 5.0

Hi All,
Can any one provide me the requirements for SAP Document management system in ECC 5.0.
SAP Component   ECC 5.0
OS    Solaris 5.9
DB    Oracle 9.2.0.7
Thanks in advance.
Regards,
Surendra
<removed_by_moderator>
Edited by: Juan Reyes on Aug 6, 2009 12:49 PM

That info is available either at http://service.sap.com/pam or http://service.sap.com/quicksizer
Please do some research before posting
Read the "Rules of Engagement"
regards
Juan

Requirements for lead management system in sap sd

hii
can we maintain lead management system in sap sd module..what are the requirements for lead management system.

no

Managed system configuration: Some required roles have not been granted

Hi experts,
I face a strange problem in my SolMan 7.1 SPS 4:
In the configuration of managed system everything is green except the last step "Check configuration" => "Configuration Check".
The error is:
Some required roles have not been granted to user SAPSUPPORT (ID: MANAGED.DUAL.SAPSUPPORT)
Action: Execute step Managed System Configurationn / Create Users
Check Context: Managed systems users/roles | Managed users/roles | SYSTEM =LSM~ABAP
and the same for SMDAGENT_xyz (ID: MANAGED.ABAP.WILYAGT).
The funny thing is that the step no. 7 (Create users) is done successfully. I have also deleted SAPSUPPORT manually and have reexecuted step 7 but no success.
Any ideas? Thanks and best regards, Basti

Hello,
Just a thought... it could be due to a UME role that is not assigned to the user. Have you checked the security guide?? There are a couple of steps to do in Visual Admin for this use as per the guide.
Cheers,
Diego.

Requirements for a document management system

We are planning to implement a document management system Oracle Application Server. Here are the high-level requirements:
· High availability (24x7)
· 3000 users, worldwide, on WAN
· 600 GB of documents
· Workflow
· Alerts e-mailed on document adds/updated, for workflow
· Search of document titles, properties, keywords, content
· Daily backup of new/updated documents
In regards to Oracle Application Server (Portal), can someone provide me the following information:
1. What Oracle AS server architecture would we need to handle the above requirements?
2. What is the Oracle recommended method of scaling up our current Oracle Portal instance in regard to:
a. Capacity
b. Achieving 24x7 availability
3. When documents are stored via an Item upload in Oracle Portal, are they stored in the database or as the actual file?
Thanks a lot,
Lpatnaik

Lot of this features are already implemented in Oracle Portal, Collaboration Suit and Oracle Content Management SDK.
http://www.oracle.com/technology/documentation/collab.html
http://www.oracle.com/technology/documentation/cm_sdk_9042.html
Generally this products stores documents in database BLOB field.
I personally don't like this approach.
We developed a media library that stores the files in filessystem, but the metadata is in database. The database references to the file in filesystem with a BFile field
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/sql_elements001.htm#i54873
The system is very fast so I think it was a good decision to store the media this way.
If you use this approach you have to create database and filessystem backup also.
Filessystem backup is much faster and there are several very good tools to make an incremental backup.
If you store media in a database you can use Oracle Media types:
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/sql_elements001.htm#i121058
Message was edited by:
zsolt.lajosfalvi

Document Management System API Required

helo
can any one tell me that is there any Java API available for document management system plz tell me from where i have to download it plz its urgent

Hmm, never heard of one, but you might try "PTC Windchill"

Need help to develop a leave management system

Hi All,
Can someone please guide me how to start with developing a leave management system? I know core java but nothing beyond that. I'd love to read J2EE and do this project.
I'd appreciate if someone can guide how to start doing this project.
For my LMS, requirement is this
Requirement : User login and after that he would get a homepage. In the homepage, we need to show the details of the leave taken along with option of leave application.
Similarly an admin shud have option to register the new user and also check his leave status (no of leaves). Shud be able to generate a report for the same.
A mail shud go to the manager for the leave application from the employee.
Thanks
Raghavendra

For learning Java EE 5, it is difficult to beat the [Java EE 5 Tutorial|http://java.sun.com/javaee/5/docs/tutorial/doc/] (PDF).
You have several options for implementing what you describe. Your web pages could be implemented with [JavaServer Pages|http://java.sun.com/javaee/5/docs/tutorial/doc/bnagx.html] and your login requirement means that you need to think about your [authentication mechanism|http://java.sun.com/javaee/5/docs/tutorial/doc/bncbe.html#bncbn], part of [securing a web application|http://java.sun.com/javaee/5/docs/tutorial/doc/bncas.html]. You also have several options for building reports, including [simple dynamic JSP construction of your reports|http://java.sun.com/javaee/5/docs/tutorial/doc/bnahl.html].

VS, ODT and using "Oracle Project"-template requires Policy Management

HI,
I installed the ODT 11.1.0.6.20 and tried to create a new project using the "Oracle Project" but received the following error message: "The project <ProjectName> requires Policy Management. Open this project in Visual Studio.NET Enterprise Developer or Visual Studio.NET Enterprise Architect."
I have tried this using VS 2008 Professional and Team Edition. The operating systems is Vista x64 Ultimate.
Oracle documentation doesn't mention any specific VS version so this is perhaps something else. Is there a workaround or fix to get around this?
TIA,
Kari

OK, I'll give it a try. This suggestion makes perfect sense. I have used that template to create a project before, but noticed that it doesn't contain a windows form by default and so I assumed that it was a build for a n-tier application database access class, which is not necessarily what I want, and so I abandoned the effort. I know I can add a window form. I appreciate the response and will post back my results.
Is there an example project somewhere that I could download and have a look at?
Thanks again for your reply, even though you didn't reply to me. I think you resolved my problem! :-)
Bruce
Edited by: Bruce Davis on Oct 19, 2009 11:07 AM
Edited by: Bruce Davis on Oct 19, 2009 11:11 AM
I replied to the wrong post!

I'm looking for a document management system

Hi there,
I'm looking for a way to organize, sort, and make searchable about 1200 Microsoft Word Documents. The way our company uses them is to search for individual documents, and also to group them to create customized packets that are used for training.
Once a group is created, I need a way to print easily. The other problem is that 60% of the documents are designed for learning so they have an instructors filled in part, and a learners blank part.
Question 1: Should I separate each document, make the instructor version a separate file? Today, it is one file, with page 1 for the instructor and page 2 for the learner (some docs have more than one page.
Question 2: Does anyone know of a web plugin or app that will take a collection of word documents, and automatically combine them into 1?
2 years ago, we created a php searchable system and uploaded all docs into it. It workds pretty well for organizing, searching, grouping, and adding comments about the docs... BUT when it comes time to print, it only downloads a folder filled with all the SEPARATE word files. They are numbered, but because they are not one doc, page numbering is a bear, and each doc has a instructor and learner page... for printing, the trainer needs to tell the office staff which page to print for each handout. the instructor copy or leaner copy. Once a master is made, we photocopy it. So the question: Is there an easier way to create 1 file with all the pages? Like convert to PDF or to a single MS Word document?
Any suggestions are welcome!
PS: while we are an all mac shop, we do have a dedicated webserver running linux that we could use.
PPS: I will have interns this summer, so if the solution involves converting all of our MS word docs into something else like pages, I'm all for it...

It sounds to me like DevonThink might just replace the php system that you already have.
One way to tackle this might be to look at automating the combining process, rather than changing the overall management system. Various thoughts:
If the docs were pdfs, a program like CombinePDFs would let you drag and drop all the files onto a screen, re-order them if necessary, and then hit Merge (actually, I think Preview would let you do this, in Leopard). That might help. However, I don't think it would put on page numbers.
I'm pretty sure Acrobat would let you combine the PDFs and add page numbers, or perhaps take the combined pdf file and just add page numbers to that. (Not sure if this might require Acrobat for Windows)
Alternatively, you could tweak the docs themselves so that they use a form of chapter numbering, eg: "PDF Introduction-1, PDF Introduction-2" and "PDF-Advanced-1, PDF-Advanced 2" and then not worry about the page numbers. I wouldn't exactly recommend this, as it's pretty useless to say "turn to page PDF-Intermediate 3" and have people find that page, but it's been done.
Since they are already Word docs, though, it might be best to stick with Word. Word 2008 has Automator and Applescript, and it should be possible to write an Automator or Applescript such you just drop the documents on an Automator app, and it combines them, adds or updates the page numbers, maybe creates a Table of Contents, and spits out an assembled document.
That said, I don't know how to do that. There is a Combine Word Documents automator action, certainly. You could try asking over in the Word forums:
http://www.officeformac.com/ProductForums/Word/
Or here's a macro that should work in Word 2004 (but not 2008)
http://www.gaebler.com/How-to-Combine-Multiple-Word-Documents-into-One-Document. htm
This will work best if all the docs are formatted consistently, based on the same template. If they are not consistently formatted, then the formatting will probably change when you combine them in Word, and that would be an argument for converting them to PDF before combining them. It should also be possible to create an Automator action that will convert all the docs in a folder to PDF.
I doubt there is going to be anyway to automate the instructor/learner copy--someone will have to do that manually, but it does suggest that if you create separate files for each one, it will be easier to do the search, download the found files from the resulting folder, and then manually just delete the learner file from the folder rather than having to open up the instructor file and delete part of it.
So, some potential experiments to try. Hope that helps.
Automator to convert the docs to PDF and then Acrobat to combine and number the pages might be your best bet.

Image Management System

Is it possible to employ photoshop album starter edition as an image management system for our College staff? The system would require to be searchable over out Intranet and contain many images.

It depends exactly what you want to be able to do. I doubt very much whether you could really get the functionality you'd need, as it's not was PSA SE 3 was designed for.
The paid-for versions have slightly more flexibility, but they are not designed to be multi-user. There are other products designed for such purposes, but they tend to be a little costly.

How to create a built in Content Management System

Hey guys, I've found myself in a spot of trouble.
My client commissioned me to create for him a website for his new restaurant (Paul's Place). I built him a responsive site using another website I found online (www.megnarestaurant.com) as a guideline. The problem is though that the client plans on changing the menu about every month and wants to be able to change it himself. I could teach him how to edit the files and add new ocntent himself (It's not even that hard after all) but that just doesn't seem like the right option.
Instead, I want to create a built in content management system that doesn't require a third party website or software like Wordpress or Joomla. I was thinking about having a page called "www.paulsdiner.com/login" where the client can log in using a username and password and can then change the content of the website.
My menu page is pretty much the same as the one found on "www.megnarestaurant.com/starters.html". I'm also using gloriafoods as an ordering system meaning that the client will have to change it on both the website itself and on the actual gloriafoods website (Not really an issue).
I want the client to be able to edit the menu boxes and add new boxes along with being able to add a new menu section (Like in the Jump Menu) which follows the template of the existing Jump Menu.
I'm making this website as a favour to my friend so I'm not being paid. As a point of reference (And future bragging and maybe some innocent blackmail ) how much do you guys think the creator of "www.megnarestaurant.com" charged his client?

Have a look at Perch
Perch - The really little content management system (CMS) - Perch
It requires a php/mysql database to run but the tables and set up are all automated through the Perch set up files - you just need a server that runs php/mysql. It works on the same principals as the one Ben suggested but its a lot cheaper for a one off site - however if you intend to build more CMS driven sites the one Ben suggested might be more financially viable in the long run.
The nice thing about Perch CMS is it fits in with your workflow unlike Wordpress/Joomla where you have to jump through hoops to change anything.
Plus I think you can take Perch for a spin before buying (or at least you could when I was exploring CMSs) - you can't with Power CMS. I never investigated Power CMS beacuse I would not buy something before trying it. It looks good but it might be a bit dated as it doesnt seem to be in continuous develoment. Perch is in a constant state of development and the guys are working to make it better on a daily basis.

Document Management System(DMS)

Dear Expert,
We need to store the Employee revision letters( in PDF format) in DMS. Letters are currently in HTML format which we will convert them in to PDF format & store the same thru Document Magement System (DMS).
I would like to know,
1. How can we use DMS to store the letters in PDF format?
2. Where can I find DMS configuration part in SPRO?
3. I understand that DMS is a unique concept availabe in SAP HR. So how can I link DMS to HCM?
4. Is SAP Archive link related to DMS ?
5. Any documents/links related to this kinldy send it across.
Thanks in Advnace,
Regards,
Damodar Pai.

hi
try with this
SAP DMS - Document Management System
SAP DMS are for storing documents such as CAD drawings, Materials pictures etc.
With the document management system, users will be able to view the documents with ease within their SAP systems.
Installing the SAP DMS requires a little bit of planning on how you want to do it.
You have to give a little thoughts to stuff such as :-
1. The total numbers of documents that will be store monthly.
2. The average file size of each documents.
3. The capacity of your present R/3 system.
4. Your present network bandwidth.
5.   Document Archiving Strategy.
6.   Backup and Recovery Plan.
Additional purchasing of hardware are required, especially if you have large amount of documents to stored.
With this in mind, you can then decide on how you want to do it.
You can do this in a few ways :-
1. Import the documents into the R/3 system.
2. Use an external document server.
3. Have a dedicated PCs where all the documents are stored.
Most companies that intend to used DMS will opt for Option 2 as they does not want to overstretch the R/3 database.
Options 1 requires you to setup the conversion interface.
The conversion interface allows R/3 to automatically covert your files and import it into the R/3 database.
Here is a simple example of storing documents into your PCs, just to have a feel how the SAP DMS works:-
For those using Citrix, you have to set this at the Citrix Server where the SAPGUI is located.
Configure SM30 - V_TDWE_C1
Put this command in your autoexec.bat
SET HOSTNAME=PC1234
Restart your pc.
You can create/manage your documents in transaction code CV01N / CV02N
Assigning Documents to a Material Master Record
Access a material master record in Create or Change mode, and select Basic Data.
To create links to documents, choose Additional data -> Document data.
The Link to Documents dialog box appears.
Assign one or more documents to the material.
If you do not know what the document number is, you can search for it using the search help or by choosing Find document.
When assigning a document to a material, you have the following options:
1. Viewing the document by choosing it in the Link to Documents dialog box.
2. Viewing any originals of the document by positioning the cursor on the document and
   choosing Display originals in the Link to Documents dialog box.
To return to the Basic Data screen, choose Continue.
Save your data.
all the best
madhu

Document Management system(DMS) and PDM webclinet????

Hello.....
I am working on Document management system(CV01 and cv02)......
The requirements are.....
1) I have crated a Document Info record(CV01) and attached originals(Drawing,diagrams) to the document in SAP system.
If user reqest to open a original in SAP then it should connect to PDM WEB client and it should fetch the original from PDM server for viewing and editing the original.
How can I implemet this scenario...Should i wrire code in ABAP or Any advaced technology(BSP or PORTAL) should i sue....
Please let me know??
Thanks and regards
Preethi....

Hello.....
I am working on Document management system(CV01 and cv02)......
The requirements are.....
1) I have crated a Document Info record(CV01) and attached originals(Drawing,diagrams) to the document in SAP system.
If user reqest to open a original in SAP then it should connect to PDM WEB client and it should fetch the original from PDM server for viewing and editing the original.
How can I implemet this scenario...Should i wrire code in ABAP or Any advaced technology(BSP or PORTAL) should i sue....
Please let me know??
Thanks and regards
Preethi....

Requirement on managed system

Similar Messages

Maybe you are looking for