Requirements quantity doubled in BW for PP cube using 2lis_4_p_comp

Hi Guys,
I am facin the following problem:
For some process Orders loaded from R/3 to BW, the requirements quantity of some of the Components in the Order has got doubled. But for other components in the Same Order, the quantity shows correct values.
The data is being loaded by delta process.
I tried running RSA3 for the same Process Order. Now, in RSA3, it shows correct qunatity.
I am not sure, why the Req. quantity values got doubled in earlier delta loads.
Do let me know if anybody has faced this prob. b4.
Request you to kinldy reply at the earliest.
Thanks,
punkuj

Hi Oscar,
The setup was run a long time back..
The orders that I am facing problems with are created recently.
So, I dont think duplication while running the setup is possibe.
Thanks,
Punkuj

Similar Messages

Good document for creating cube using AWM wih oracle 10.1.0.2 version

Can anyone provide some good guide for implementing the OLAP cubes using ORACLE ver 10.1.0.2.0 with AWM Release 1.
Also, please let me know whether I need to apply any patches.
The demo provided under this link has some differences when trying to implement.
http://www.oracle.com/technology/products/bi/olap/viewlet/awm10g_viewlet_swf.html
Your help is appreciated.

Well, if some of the required componets were missing, I would imagine you getting an error when trying to connect?
Where is this ASP application actually running?
Is it running on your localhost IIS web server?
If not, any setup on your computer will be irrelevent.
If it is, you need to install MDAC components, and 2.8 is the latest.
If running on your local IIS, did you try to create a very basic ASP page which just creates a connection to the database in question? Does that work?
Do you have ON ERROR statements in your code to bypass any/all SQL errors?
If you create a simple UDL file on your desktop and specify the server/user/password (ater selecting Oracle OLEDB driver), does the connect button work?

Round Requirement quantity of component for subcontracting

Hello,
I need to round a requirement quantity of component in subcontracting PO automatically? So in MD04 it shows as rounded quantities not just the base on BOM cmponent quantity ( Only for component what we send to vendor not the kit we recieving back ).
Any help will be appreciated!
Best Regards,
Owais
Edited by: Owais on Jul 8, 2011 3:13 PM

Hello,
It just help planners to plan better.
We already cofigured so the components gets pick at rounded value on WM side. Its just MM side, if we can round the value for subsequent requirements. (Component requirement QTY - ERFMG)
Any Help!!!
Thanks.

Capture ERFMG - Requirement quantity for a component

Hi All,
I have a requirement where in i need to capture the requirement quantity for a component(ERFMG).
The problem is the value exists only at runtime in the following structure MDPM.
I am writing the code in an exit EXIT_SAPMM06E_013 where in i cannot capture this value from this structure.It is not storing in a database table also . how can i get this value ?
Kindly help.
Priya.

Hi,
Thank you for your post!
It is exactly what I have done but as I above mentioned:
Subsequent problem
The system schedules the dates correctly on the component level, but re-schedules the dates for the project the day you schedule and erase the complete old scheduling dates except for the activities with constraints.
If I have an "old" scheduled project and I add some new components anywhere in the complete project structure additional needs. I go then to the project definition level and schedule the complete project. My result is that on project definition and WBS elements no changes but on all activities (without confirmation) the system put the start date the day which I re-schedule the project.
That what I want to avoid and let the initial planned schedule date on activity level the same as before re-scheduling the project.
Do you have any further advices?
Thank you in advance for your input
Best regards

Table for Demand/Requirements quantity

Hi ,
Can you help me determine if there is a table in PP and MM module that contains the demand or requirements quantity for each material? I need to create a customized report that will show the demand per period of time(monthly).
Thanks in advance.
Regards,
Melvin Salayo

Hi,
Check the below tables you will get the reuired stuff
*Planned indepedent requirements:*
     PBIM                    Independent requirements for material
     PBED                    Independent requirement data
     PBHI                    Independent requirement history
     PBIV                    Independent requirement index
     PBIC                    Independent
Reservations
     RESB                    Material reservations
     RKPF                    header
Thanks
Satya

Tables for MRP requirements quantity.

Dear Experts,
I have requirements where in I want to know the table from which I will get the the material requirements quantity.
Example is as below;
I have given PIR through MD61 of "ABC" material as 100 qty.
After this through MD02 i will generate requirements which will appear in Stock Requirements list MD04.
If stock is available then accordingly it will create PR/Planned order.
Here my requirement is that i want to display pure requiremnets that is 100 qty irrespective of what stock is available.
In which table i will get this pure requiremts.
Please help.

Hi,
Please check in table:
PBED - PIR items
MDKP
MDTB
Also you can use FM: MD_STOCK_REQUIREMENTS_LIST_API. Best is use this FM.
Regards,
Alok Tiwari
Edited by: Alok Kumar Tiwari on Dec 14, 2011 11:28 AM

When we drilldown at document level it displays one record for each cube

Dear Experts .
The users want to see the report by status for the order detail report at document level it displays one record for each cube .
They want to see the single line for the order quantity , Amount, Billing quantity delivery and amount along with the Sales order number , billing document number billing date , delvert date ..et in signgle line. ( Sale order DeliveryBilling)
When we are doing on Multiprovider recording displaying from each cube.
We have tried with Constant selections and it is not giving the required results m since these want to see by status. Due to huge data performance reasons we re unable to use it .
Please provide your valuable inputs.
Thanks,
Mahesh.

Mahesh,
If you want to get detail data with respect to Sales order - delivery - Billing, on top of Multiprovider you can come up with Constant selection.
But I am not clear that why constant selection is not working properly, can I have some light on that.
Probably, you are struggling with multiple records .
I suggest you to go with end routine and map all fields to one IC and do reporting on that single IC, then your requirement will fulfill.
But here we need to take care of performance issues and process chain scheduling wile loading deltas.
If Multiprovider is not working properly , then try with Infoset(If you have more than 2 ICs it not possible).
Regards,
rvc

Replenishment with less than required quantity

All,
We are executing replenishment via RLLNACH1 (or LP21) from our high rack to our fixed bins in the background.
We then run RLAUTA10 to create the TO from the TR. We have selected allow partial prov in TO and Select partially processed TO's.
In some cases, we are seeing TO's created for less than the required quantity or NO TO's at all when there is enough stock in both cases.
Scenario 1:
Material Master Settings for fixed bin:
Min: 10
Max: 102
Replen Qty: 0
Stock situation:
High rack for bin1 = qty 26
High rack for bin2 = 120
Fixed bin Qty avail stock = 4 (below min)
TR created for Qty of 98 (102 minus 4 avail). TO created for only 26 (the first bin above in full). This leaves the TR partially processed, with remaining open qty of 72 (98 minus 26). The system did not create TO a second line item for the TO from the other available stock in bin2 for the balance up to the maximum. Any ideas why not? Does GR Date in high rack bin or quantity in the high rack bin?
Scenario 2:
Material Master Settings for fixed bin:
Min: 30
Max: 50
Replen Qty: 0
Stock situation:
High rack for bin1 = qty 150
High rack for bin2 = 300
High rack for bin3 = 275
Fixed bin Qty avail stock = 15 (below min)
TR created for Qty of 35 (50 minus 15 avail). TO is NOT being created. There is plenty of stock in high racks. Not sure why???
This is creating many ineffeciencies in our system. Please respond.
Regards,
Sandy Miner

Thank you very much for your reply. I believe my settings are correct for my strategies and storage type master data.
Storage Type Search strategy is going for both high rack and double pallet (001 & 002). My stock in question is located in the high racks (001). High racks are SU managed.
The materials in question are not batched managed, so that should not be an issue.
The fixed bin storage type has 'addition to stock' set and it is not SU managed. We do not allow mixed storage of any kind. I don't THINK this is a problem because the fixed bin is not SU managed and, as stated before, the material is not batched managed, so changing it to setting "A" several homogeneous storage units per bin should not impact this because it's not SU managed. Do you agree?
I am checking the back ground job log as well, to see if there's any messages in that log. I do like the idea of creating the TO manually and 'debugging' the search strategy, etc.
Any other input would be helpful. Especially about the mixed storage note above. Could this be an issue? Do you allow mixed storage in your fixed bins? Are you settings similar?
Thank you,
Regards,
Sandy

How to make field requirement quantity mandatory in maint order?

Hi Experts,
I would like to make filed RESBD-MENGE - requirement quantity field in component tab of maintenance order mandatory. But I am not getting the IMG settings for this. I checked this screen settings for components for PM/CS orders. But I didn't get this field in that screen. Can anybody help me out on this?
Thanks and Best Regards,
Praveen.

Hi,
I need this to activate for all order types. I think this can be accomplished by user exit IWO10009, which will trigger during saving event. I didn't try for this but i used this exit previously for checking during saving event for some other field. I think this can be used here also so that while saving the system will check the field and if the field is empty, system will give the error message. some coding may required to check the field.
If you have any alternative idea kindly share.
Thanks and Best regards,
Praveen

Requirement quantity and quantity withdrawn are not matching

From a production order the requirement quantity of one component is 4 and for another component, it is 2. But the withdrawn quantity for the first component is 5 and for the 2nd component it is 0. This has caused a COGI error.
Also the total quantity and the delivered quantity is shown as 6.
How can this be corrected and prevented from happening in the future.

Hi Jeby,
Thanks very much for your reply.
Batch management is not used for both the components.
For both the components the storage location is mentioned in the components overview of the production order. When I checked in the material master the same storage location is existing in the materiala master also

Help required in reading freight price for PO item. See below code.

H All,
I have a requirement to read frieght cost for each PO item.
Please see the below code and let me know is this approach is correct or not.
* Fetch PO header details for selected criteria
SELECT ebeln                         "Purchasing document
         bstyp
         bsart
         loekz
         lifnr                         "Vendor
         ekgrp                         "Purchasing group
         bedat                         "Document date
         knumv
    INTO TABLE t_ekko
    FROM ekko
   WHERE ebeln IN s_ebeln
     AND lifnr IN s_lifnr
     AND ekgrp IN s_ekgrp
     AND bedat IN s_bedat.
IF sy-subrc EQ 0.
    DELETE t_ekko
     WHERE ( bstyp NE c_bstyp_f
       AND bsart NE c_bsart_nb
       AND loekz NE space ).
    SELECT knumv
           kposn
           kdatu
           kbetr
           kwert
           lifnr
      INTO TABLE t_konv
      FROM konv
       FOR ALL ENTRIES IN t_ekko
     WHERE knumv EQ t_ekko-knumv
       AND lifnr EQ t_ekko-lifnr
       AND kdatu EQ t_ekko-bedat
       AND kappl EQ c_kappl_m
       AND kschl EQ c_kschl_frc1.
* Fetch PO item details for the retrieved purchase orders
    SELECT ebeln                       "Purchasing document
           ebelp                       "PO item
           txz01                       "Short text
           matnr                       "Material
           matkl                       "Material group
           menge                       "PO quantity
           meins                       "UOM
           netpr                       "Net price
           netwr                       "Net value
     INTO TABLE t_ekpo
     FROM ekpo
      FOR ALL ENTRIES IN t_ekko
    WHERE ebeln EQ t_ekko-ebeln
      AND matnr IN s_matnr
      AND loekz EQ space
      AND matkl IN s_matkl.
LOOP AT t_ekpo INTO fs_ekpo.
* Read header details from EKKO for each PO item
    READ TABLE t_ekko
          INTO fs_ekko
          WITH KEY ebeln = fs_ekpo-ebeln.
    IF sy-subrc EQ 0.
      MOVE:
        fs_ekpo-ebeln TO fs_poitems-ebeln,
        fs_ekpo-ebelp TO fs_poitems-ebelp,
        fs_ekko-lifnr TO fs_poitems-lifnr,
        fs_ekko-ekgrp TO fs_poitems-ekgrp,
        fs_ekko-bedat TO fs_poitems-bedat,
        fs_ekpo-txz01 TO fs_poitems-txz01,
        fs_ekpo-matnr TO fs_poitems-matnr,
        fs_ekpo-menge TO fs_poitems-menge,
        fs_ekpo-meins TO fs_poitems-meins,
        fs_ekpo-netpr TO fs_poitems-netpr,
        fs_ekpo-netwr TO fs_poitems-netwr.
* Read table KONV for fetching fieght charge
      READ TABLE t_konv
            INTO fs_konv
            WITH KEY kposn = fs_poitems-ebelp
                      kdatu = fs_poitems-bedat
                      lifnr = fs_poitems-lifnr.
      IF sy-subrc EQ 0.
        MOVE:
          fs_konv-kwert TO fs_poitems-fri_val.
      ENDIF.                           " if sy-subrc eq 0.
Please suggest me.
Thanks,
Jwala
Edited by: Rob Burbank on Mar 12, 2009 12:09 PM
Please use code tags

Hi,
I believe the approach is good, I would have done similar.
Regards,
Gilberto Li
Edited by: Gilberto Li on Mar 12, 2009 5:13 PM

Open Hub For BPC Cubes

Hi Gurus,
I have an issue about the open hubs for BPC cubes. I have a need to take my transactional data from my BPC cube to a table.So I want to create an open hub on my BPC planning cube.
But when i create the open hub on BPC cube, it doesn't read the package. So, data cannot be read. But the open hubs work on my BW cubes.
Is there anything i should do different for BPC cubes ? How can i make the open hub work?
Thanks in advance..
Fatih

Hi Fatih,
Glad you got this working, but a word of warning: As far as I am aware, customer SAP BW development linked to objects in the BPC namespace is not supported. It may very well work, but BPC may also delete and recreate BW objects at any time and without warning, which can leave you in a situation in your production environment that is very difficult to recover from without manual modification of the production BW environment.
The recommended way to export data from BPC NW into a flat table is to use the BPC data manager Export package. You may want to try this option and see if you can meet your requirements this way.
Ethan

Quantity Baed Order Type for Release from ASCP

Hi All,
I have got requirement where the order type for release is defined based on the quantity. For certain set of items, they can be made warehouse with some base items if the quantity to be shipped is less than a threshold quantity ( say 15). But they need to be drop ship from plant if the quantity s greater than this.
How can setup this in ASCP.
Current solution that I am evaluating is using release hooks. Using release hooks I am evaluating the change in order type based on quantity.
Any suggestions or simpler way to do this?
Regards,
Yash

Dear Sunny
Have you solve the problem?
When I use J3AT for allocating stock, I meet the same error with you, Just for some of the Sales orders.
Thanks.

CN 752: Requirement quantity & & smaller than quantity withdrawn & &

Dear Gurus,
I have found a strange behavior in SAP PM order processing.
Even after withdrawing the spare parts, system is allowing to change the required quantity.
If someone is increasing the quantity thats fine.
But if someone is decreasing the quantity, system should not allow it.
System is giving below information message:
CN 752
Requirement quantity & & smaller than quantity withdrawn & &
I want to give error in such scenario.
I have tried setting an error message for above message, but its not working.
Any help in this regard will be highly appreciated.
Please help.
Thanks & Regards,
Mihir Popat

Hello,
Thank you very much for your inputs.
I have checked that, but it is still not working for me.
I have debugged the standard code and found that it is hard coded over there as information message for message CN 752, and system is not checking any table while issuing the message.
However for message CN 750, system checks the table and decides accordingly, whether to give warning or error.
Hence, it is clear that it will be information message only.
I will be mapping my requirement with user exit CNEX0026, where i will check the withdrawn quantity and required quantity and decide on whether to give error or not.
Thanks to all for your help.
Closing the thread.
Regards,
Mihir Popat

Reservation: withdrawn quantity exceeded requirement quantity

Hi Gurus.
Please help.
Is there a way to check why withdrawn quantity exceeded requirement quantity in reservation? System should get standard message M7362 when this happens. Settings in OMCQ are correct.
Thanks in advance...

Hi,
The message might relevant for the scenario of GI to reservation, which issued quantity greater then reserved quantity in reservation.
You may check your reservation with MB25 for listing your reservation document and I suggest to use MB26 for collective and more accurate GI processing of relevant reservations.
Cheers,
Girang

Requirements quantity doubled in BW for PP cube using 2lis_4_p_comp

Similar Messages

Maybe you are looking for