Requirements related to connect PHP & SAP

Hi,
i have a requirement of connecting PHP and SAP.I am using PHP 5.0 version and SAP ECC 6.0.Do i require any other tools.
please guide me.
Regards,
Manesh.R

Hello Nigel,
thank you for the previous Information.
> If you have any other questions after having read all this ask away.
- I have read your message regarding library sources, and I still have a question regarding saprfc on Linux 32bit x86.
I am trying to compile saprfc under Ubuntu 8.04 32bit and I cannot find the appropriate NON-UNICODE sap-rfc source.
Note 1025361 "Support and Availability of the SAP NetWeaver RFC Library" clearly states that
"For the release 7.11 of the NW RFC SDK the following platforms and OS versions are currently supported:
Linux x86 32bit (Versions: SuSE SLES9, SuSE SLES10, RedHat EL4, RedHat EL5)"
- however I could not find "NW RFC SDK for Linux x86 32bit" at https://websmp107.sap-ag.de/swdc (there is only a 64bit version)
:: Support Packages and Patches - Entry by Application Group" Additional Components" SAP NW RFC SDK" SAP NW RFC SDK 7.11
AIX 64bit, * HP-UX on IA64 64bit, * HP-UX on PA-RISC 64bit,
Linux on IA32 32bit
Linux on IA64 64bit
Linux on Power 64bit
Linux on x86_64 64bit
Linux on zSeries 64bit
OS/400, * Solaris on SPARC 64bit, * Solaris on x64_64 64bit, * Windows Server on IA32 32bit, * Windows Server on IA64 64bit, * Windows Server on x64 64bit, * z/OS 64bit
:: Support Packages and Patches - Entry by Application Group" Additional Components" SAP RFC SDK" SAP RFC SDK 7.11
AIX 64bit, * HP-UX on IA64 64bit, * HP-UX on PA-RISC 64bit,
Linux on IA32 32bit
Linux on IA64 64bit
Linux on Power 64bit
Linux on x86_64 64bit
Linux on zSeries 64bit
OS/400, * Solaris on SPARC 64bit, * Solaris on x64_64 64bit, * Windows Server on IA32 32bit, * Windows Server on IA64 64bit, * Windows Server on x64 64bit, * z/OS 32bit, * z/OS 64bit
- Please advise, which version of saprfc should I use for Ubuntu 8.04 32bit x86 ?
Thank you in advance!
Alexander

Similar Messages

Unable to create a Relational Connection to SAP Netweaver BW Infoprovider

Hi Experts,
I'm tring to create a relational connection to SAP Netweaver BW Infoprovider: Information Design Tool
And have mentioned all the parameters needed for the connection correctly.
Current version is BW 7.4 and IDT 4.1
But m getting the error which is returning from the host due to failed RFC Connection which I have not understood.
Please guide me how to resolve this error and what is the reason behind this error. .
Kindly see the attached file of error.
Your answers will be helpfull.
Thanks & Regards,
Shruti

Hi,
Check the attached wiki link to setup RFC connection.If this not already setup then ask your basis team to setup RFC connection.Before creating the IDT connection test the RFC connection in sm59.
SAP BW With RFC JCO Connections In Information Design Tool - Business Intelligence (BusinessObjects) - SCN Wiki
if you set the manual call back then add higlighted parameters in the IDT connection.
Amit

BO 4.0 - Database error: Unable to connect to SAP BW Incomplete logon data

Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
[http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers]
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.

Hi Simone,
Thank you for the reply.
Here are the things done by me.
1. Generated the keystore file and imported it in BI 4.0 CMC on SAP Authentication Option tab
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/GeneratekeystoreandcertificateforSAPBO+BI4.0])
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/SetupofSAPSSOServiceinSAPBOBI4.0+CMC])
2. Generate the certificate file cert.der and this cert is imported in SAP BW with STRUSTSSO2 transaction.
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/ImportSAPBOBI4.0certificateintoSAP+BW])
3. BW Roles/Users have been imported into CMC.
4. SAP Users and LDAP users are mapped/aliased with each other using the registry key method
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtomapSAPusersandLDAPusersinSBOBI4.0+CMC])
I haven't explicitly configured STS (Security token service) as STS is a part of Adaptive processing server (APS) and I have verified that by going to servers in CMC and then to analysis services.
I have searched for SAP OSS notes related to my issue but couldn't find any note related to SAP BW SSO with Business objects 4.0. Most of the notes are relevant for BO XI 3.1 environments.
Thanks & regards,
CD.

BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon

Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.

Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds.

Help required related to solman 7.0 configuration

Dear all,
I am installed solution manager 7 , then download solution manager patches stack 7.0 initial to 26 and apply .SCA in java instance but unfortunately some patches required approval , then I restart server and after startup unable to connect in
http://host:port/nwa and SOLMAN_STEUP web page but I am able to connect config tool, now I am confused that what is the process to configure solman or which steps I follow for example
saprouter configuration ( connect to sap )
Maintenance optimizer
or else
plz guide me and if possible then provide configuration related to solman 7.0
regards
Rayyan Shahid

Hello,
You can follow the SPRO, it has information for every activity that has to be run.
You can also have a look at the Solution Manager 7 EHP1 configuration guide at
https://websmp105.sap-ag.de/~sapidb/011000358700000308502009E.PDF
There are also tutorial documents to configure Solution Manager at
http://service.sap.com/rkt-solman , you can download the ones you need at https://websmp206.sap-ag.de/~sapidb/011000358700001991742008E.zip
Please ask questions related to the content of the guides if needed.
Best regards,
Miguel Ariñ

Connecting to SAP DB from Oracle Database

Hi,
I need to connect to SAP Database which resides in AIX Server from Oracle Server resides in Windows 2003.
My Scenario is for every 15 mins I need to connect to the SAP Database and if Updates happened I need to update my Oracle Table. I need to Update the SAP Database if update is happened in Oracle Database. How do we need to proceed to achive this. We have provided with a SAP user and a Table with it.
Thanks & Regards,
Vijayaraghavan K

Hi,
My Scenario is for every 15 mins I need to connect to the SAP Database and if Updates happened I need to update my Oracle Table. I need to Update the SAP Database if update is happened in Oracle Database.
you need to connect to SAP DataBase and If Updates happened .. in which DB .. ?? SAP or your DB on windows
I need to update my Oracle Table .. In which DB.. ?? SAP or your DB on windows
Any how if it is related to one table in particular go for DB Links which will slove your problem, as per your requirement.
Refer : http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/ds_admin.htm#sthref4108
- Pavan Kumar N

Help needed in Connecting to SAP From Eclipse

Hi All,
Currently, we have a requirement where we need to retrieve data from SAP System and need to upload the same in a Third Party Application (Java based system).
We are able to create an account in Java Application using Eclipse IDE by hard coding the Account details. We are stuck up in establishing the SAP connection and retrieving the details and then creating the extracted account details in Java application from Eclipse.
Any pointers on this will be of great help.
Regards,
Eureka

Hi Eureka,
Please refrain from creating cross-posts in parallel forums, moreover this question is JCo-related and is not directly connected with Java EE 5. The Help needed in Connecting to SAP From Eclipse in the Java Programming forum would be enough. Please continue the discussion there.
Regards,
Vladimir

HTTPs connection from SAP WebAS

Hello,
I have to establish a connection from SAP WebAS to an iSaSiLk server via HTTPS.
The iSaSiLk authentication is based on client certificates.
I've created a SSL client PSE, generated the Certificate Request, imported the certificate response and the chain of certificates associated with no errors. When testing the connection we're getting the following error message:
SAP icm log:
[Thr 1087400256] ->> SapSSLSessionInit(&sssl_hdl=0x2aaaba679980, role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT))
[Thr 1087400256] <<- SapSSLSessionInit()==SAP_O_K
[Thr 1087400256] in: args = "role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT)"
[Thr 1087400256] out: sssl_hdl = 0x1a3310c0
[Thr 1087400256] ->> SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)
[Thr 1087400256] NiIBlockMode: set blockmode for hdl 22 TRUE
[Thr 1087400256] <<- SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)==SAP_O_K
[Thr 1087400256] ->> SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0, &cred_name=0x1a49e4e0)
[Thr 1087400256] SapISSLComposeFilename(): Filename = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] <<- SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256] in: cred_name = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] ->> SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0, &hostname=0x1a4a09e0)
[Thr 1087400256] <<- SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256] in: hostname = "<remoteServer_to_be_accessed>"
[Thr 1087400256] ->> SapSSLSessionStart(sssl_hdl=0x1a3310c0)
[Thr 1087400256] SapISSLUseSessionCache(): Creating NEW session (0 cached)
[Thr 1087400256] Tue Jan 13 10:10:22 2009
*[Thr 1087400256] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL*
[Thr 1087400256] session uses PSE file "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] SecudeSSL_SessionStart: SSL_connect() failed
secude_error 536871693 (0x2000030d) = "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite"
[Thr 1087400256] >> Begin of Secude-SSL Errorstack >>
[Thr 1087400256] ERROR in ssl3_get_certificate_request: (536871693/0x2000030d) none of the PSEs registered with hSsl can suffice
[Thr 1087400256] << End of Secude-SSL Errorstack
[Thr 1087400256] SSL_get_state() returned 0x00002150 "SSLv3 read server certificate request A"
[Thr 1087400256] No certificate request received from Server
[Thr 1087400256] <<- ERROR: SapSSLSessionStart(sssl_hdl=0x1a3310c0)==SSSLERR_SSL_CONNECT
[Thr 1087400256] ->> SapSSLErrorName(rc=-57)
[Thr 1087400256] <<- SapSSLErrorName()==SSSLERR_SSL_CONNECT
[Thr 1087400256] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt
On the iSaSiLk server we're getting:
ssl_debug(2): Starting handshake (iSaSiLk 3.06)...
ssl_debug(2): Received v3 client_hello handshake message.
ssl_debug(2): Client requested SSL version 3.0, selecting version 3.0.
ssl_debug(2): Creating new session 11:5F:04:C9:0D:32:15:B9...
ssl_debug(2): CipherSuites supported by the client:
ssl_debug(2): SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): SSL_RSA_WITH_RC4_128_MD5
ssl_debug(2): SSL_RSA_WITH_3DES_EDE_CBC_SHA
ssl_debug(2): SSL_RSA_WITH_DES_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC4_40_MD5
ssl_debug(2): CompressionMethods supported by the client:
ssl_debug(2): NULL
ssl_debug(2): Sending server_hello handshake message.
ssl_debug(2): Selecting CipherSuite: SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): Selecting CompressionMethod: NULL
ssl_debug(2): Sending certificate handshake message with server certificate...
ssl_debug(2): Sending certificate_request handshake message...
ssl_debug(2): Sending server_hello_done handshake message...
ssl_debug(2): IOException while handshaking: Connection closed by remote host.
ssl_debug(2): Sending alert: Alert Fatal: handshake failure
ssl_debug(2): Shutting down SSL layer...
ssl_debug(2): Closing transport...
From the iSaSiLk everything seems to be OK, but on the SAP WebAS the error "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite" is really unclear, since the cipher chosen by the iSaSiLk is one of the ciphers sent by SAP WebAS...
Can anyone give me any suggestion?

Hello Olivier,
Thanks for your answer.
I've implemented note 800240 which facilitates the PSE analysis by implementing the report ZSSF_TEST_PSE. With this report I'm able to check all the PSE content, which are:
Filename SAPSSLSPHTID.pse
PIN <no>
Signature X
Encryption X
Profile Parameter
DIR_INSTANCE /usr/sap/XID/DVEBMGS00 /usr/sap/XID/D00
sec/dsakeylengthdefault 1024
sec/libsapsecu /usr/sap/XID/SYS/exe/run/libsapcrypto.so
sec/rsakeylengthdefault 1024
ssf/name SAPSECULIB
ssf/ssf_md_alg SHA1
ssf/ssf_symencr_alg DES-CBC
ssf/ssfapi_lib /usr/sap/XID/SYS/exe/run/libsapcrypto.so
ssf2/name
ssf2/ssf_md_alg SHA1
ssf2/ssf_symencr_alg DES-CBC
ssf2/ssfapi_lib
ssf3/name
ssf3/ssf_md_alg SHA1
ssf3/ssf_symencr_alg DES-CBC
ssf3/ssfapi_lib
Environment variables
USER xidadm
SECUDIR /usr/sap/XID/DVEBMGS00/sec
PSE
Validity 18.12.2008 19:47:04 18.12.2009 19:47:04
Algorithm RSA (OID 1.2.840.113549.1.1.1)
Test signature
Signature OK
Verification OK
Test encryption
Encryption OK
Decryption OK
As you can see, the cipher algorithm used is RSA. Any suggestion... ?
An iSaSiLk server "is a Java programming language implementation of the SSLv2 (client-side), SSLv3, TLS 1.0 and TLS 1.1 protocols. It supports all defined cipher suites (except for Fortezza), including all AES and PSK cipher suites. iSaSiLk implements all standard TLS extensions, comes with an easy to use API and operates on top of the IAIK-JCE Javau2122 Cryptography Extension. iSaSiLk is highly configurable and will work with any alternative JCE implementation supported by a proper provider for supplying the required cryptographic algorithms".
Once again thanks for your answer.

Connection from SAP 4.0B System to IBM MQ Series

Hi
is it possible to connect SAP 4.0B System with IBM MQ Series 6.0,is the connection supported by SAP 4.0B?
If supported I am confused with what is the RFC Destination to be used
is it R/3 Connections or TCP/IP connections
Thanks in advance
Warm regards
Rajasekhar

Hi Anup
Thanku for your valuable input, here in the TCP/IP connections can you please suggest what are the
ACTIVATION TYPE to be used there are 4 radio buttons, is it the
Registered Server Program OR
Start On Application serverOR
Start on Explicit Host OR
Start on Front End Work Station
if it is the registered server program what are the values to be used for PROGRAM ID
is it required to make any changes in SAPRFC INI File
Thanks in advance
Warm regards
Rajasekhar

External Oracle Databse connection from SAP

Dear all,
I know that this question has been asked before, but as i am facing some primitive issues so i am again posting my query.
My requirement is to connect to an external ORACLE db from SAP and read data from that server. That ORACLE db is located in a different m/c altogether. I was trying to connect by making settings in DBCON -
CON NAME= ORA_TEST
DBMS= ORA
USER NAME= administrator
PASSWORD= (some pwd)
CON ENV= ????? (what is to be put here)
And I know that we have to make some corrections in tnsnames.ora file, but I am unable to find that file in SAP system. Where can I find this file ???
Do we have to make one RFC connection as the SAP and ORACLE servers are in diff m/c and then do the connection, but this is just my guess??
And if any RFC is at all required then what should be the parameters for that connection.
Kindly help me in resolving the issue.
1. CON ENV ?
2. tnsnames.ora ?
3. Any RFC needed ?
Points will definately be rewarded.
Thanks,
Saurabh.

Hi,
I have done the required settings everywhere but the connection is failing.
The tnsname.ora file is located in my Oracle client directory and the settings done there are -
LEVEL2 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST =
                            192.167.40.54)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = level2)
in DBCON i have made the following entry -
1. DB Connection : NEWORA
2. DBMS :             ORA
3. User Name :       User Name external oracle database
4. DB Password :   Password external oracle database
5. Conn Info :         level2
and my ABAP code looks like -
DATA: BEGIN OF wa,
ncli(20) TYPE c,
num(20) TYPE c,
END OF wa.
DATA: dbs TYPE dbcon-con_name.
DATA: con(20) TYPE c.
DATA : ls_wa LIKE wa.
dbs = 'NEWORA'. "DB Connection in DBCO
EXEC SQL.
connect to :dbs
ENDEXEC.
EXEC SQL.
GET CONNECTION :dbs
ENDEXEC.
WRITE : dbs.
EXEC SQL PERFORMING loop_output.
select bundle_cnt, job_id from GHCBRMRT.RML_BUNDLE into :ls_wa
ENDEXEC.
FORM loop_output.
WRITE: / ls_wa-ncli,
ls_wa-num.
now my dilemma is how SAP will recognize in DBCON what really "level2" means ?? as the settings are there in ORACLE directory and not inside SAP system.
the dump error msg that I am getting is -
Runtime Errors         DBIF_DSQL2_CONNECTERR
Except.                   CX_SY_NATIVE_SQL_ERROR
Date and Time          13.08.2008 10:20:47
Short text
     Error setting up a secondary database connection
What happened?
     Connection to database system not possible with
      identifier "NEWORA".
Missing Handling of System Exception
     Program                                 YY_NEW_CONN
Kindly help in this regard as where I am going wrong.

Live Office Error when connecting to SAP BW data (Offline dashboard)

Hi experts,
we have built up an Live Office connection to SAP BW query data to create a dashboards, which can show the data also in offlne mode. We are using exactly the same procedure as recommanded by Ingo Hilgofort in [End-to-End Scenarios With Xcelsius 2008|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/90ad73b1-506c-2b10-9e9b-9fde523f010a].
When trying to refresh the Live Office connection using the "Refresh" button in the dashboard we receive the error LO 26301: The current refresh option requires a report instance that does not exist.
The recommended action is: Change the refresh option of the object or use the CMC to schedule a new instance.
But creating an instance of the dashboard is not possible. What is meant by that? Is it necessary that we embed the Xcelsius flash into a PDF or a Crystal Report? What are our alternatives?
Best regards,
Sebastian

Sebastian Koeffer wrote:
Hi Gowda,
>
> an instance of the report did not solve our problems. Even if it does, this is not our preferred solution. Anyway we would like to prefer to use the direct universe connection (Create new universe query) instead of linking to a Webi or Crystal report.
>
> Best regards,
> Sebastian
Hi Gowda Timma Ramu,
i create an instance of report by USER1... and..... dashboard is pointed to latest instance.
when i refresh a dashboard (by clicking on refresh button) it requires login to infoview ... i login to infoview by USER 2 not by USER1.....
it showing an error
_The current refresh option requires a report instance that does not exist. (LO 26301)_
Note:-But data is changing in dashboard
any solution for solving this error.
Its urgent...
Thank You.

Issue with My VB Code when connecting to SAP

Hi Guys: I am trying to upload Customer Master Data information into SAP from Excel using VB. Here is my code.
Private Sub CommandButton3_Click()
' Getting the last filled Row in Column A
vLastRow = Cells(Rows.Count, "A").End(xlUp).Row
' Setting the necessary variables for R/3 connection
Set objBAPICortrol = CreateObject("SAP.Functions")
Set objConnection = objBAPICortrol.connection
' Establish a connection
If objConnection.Logon(0, False) Then
    MsgBox "Connection Established"
End If
On Error Resume Next
' Assign the Parameters
Set objCreateCustomer = objBAPICortrol.Add("BAPI_CUSTOMER_CREATE")
Set objAccountGroup = objCreateCustomer.Exports("Acct Gr")
Set objCompanyCode = objCreateCustomer.Exports("Co Code")
Set objSalesOrganization = objCreateCustomer.Exports("Sales Org")
Set objDistributionChannel = objCreateCustomer.Exports("Dist Ch")
Set objDivision = objCreateCustomer.Exports("Div")
Set objName = objCreateCustomer.Exports("Name")
Set objStreet = objCreateCustomer.Exports("Street")
Set objHouseNumber = objCreateCustomer.Exports("House Number")
Set objPostalCode = objCreateCustomer.Exports("Postal Code")
Set objCity = objCreateCustomer.Exports("City")
Set objRegion = objCreateCustomer.Exports("Region")
Set objCountry = objCreateCustomer.Exports("Country")
Set objCountyCode = objCreateCustomer.Exports("County Code")
Set objPhone = objCreateCustomer.Exports("Phone")
Set objContact = objCreateCustomer.Exports("Contact")
Set objFax = objCreateCustomer.Exports("Fax")
Set objEmail = objCreateCustomer.Exports("Email")
Set objDirections = objCreateCustomer.Exports("Directions")
Set objCityCode = objCreateCustomer.Exports("City Code")
Set objReconAccount = objCreateCustomer.Exports("Recon Account")
Set objPaymentHistory = objCreateCustomer.Exports("Payment History")
Set objCustomerPricingProcedure = objCreateCustomer.Exports("Cust Pricing Procedure")
Set objCustomerStatisticsGroup = objCreateCustomer.Exports("Cust Stat Group")
Set objIncoTerms = objCreateCustomer.Exports("Inco Terms")
Set objTermsofPayment = objCreateCustomer.Exports("Terms of Payment")
Set objAccountAssignmentGroup = objCreateCustomer.Exports("Acnt Assign Group")
Set objTaxClassification = objCreateCustomer.Exports("Tax Classification")
' Now looping through all values create customer
' The data begin row is set to 2
For vRows = 2 To vLastRow
' Set the Parameter Values
objAccountGroup = ThisWorkbook.ActiveSheet.Cells(vRows, 1).Value
objCompanyCode = ThisWorkbook.ActiveSheet.Cells(vRows, 2).Value
objSalesOrganization = ThisWorkbook.ActiveSheet.Cells(vRows, 3).Value
objDistributionChannel = ThisWorkbook.ActiveSheet.Cells(vRows, 4).Value
objDivision = ThisWorkbook.ActiveSheet.Cells(vRows, 5).Value
objName = ThisWorkbook.ActiveSheet.Cells(vRows, 6).Value
objStreet = ThisWorkbook.ActiveSheet.Cells(vRows, 7).Value
objHouseNumber = ThisWorkbook.ActiveSheet.Cells(vRows, 8).Value
objPostalCode = ThisWorkbook.ActiveSheet.Cells(vRows, 9).Value
objCity = ThisWorkbook.ActiveSheet.Cells(vRows, 10).Value
objRegion = ThisWorkbook.ActiveSheet.Cells(vRows, 11).Value
objCountry = ThisWorkbook.ActiveSheet.Cells(vRows, 12).Value
objCountyCode = ThisWorkbook.ActiveSheet.Cells(vRows, 13).Value
objPhone = ThisWorkbook.ActiveSheet.Cells(vRows, 14).Value
objContact = ThisWorkbook.ActiveSheet.Cells(vRows, 15).Value
objFax = ThisWorkbook.ActiveSheet.Cells(vRows, 16).Value
objEmail = ThisWorkbook.ActiveSheet.Cells(vRows, 17).Value
objDirections = ThisWorkbook.ActiveSheet.Cells(vRows, 18).Value
objCityCode = ThisWorkbook.ActiveSheet.Cells(vRows, 19).Value
objReconAccount = ThisWorkbook.ActiveSheet.Cells(vRows, 20).Value
objPaymentHistory = ThisWorkbook.ActiveSheet.Cells(vRows, 21).Value
objCustomerPricingProcedure = ThisWorkbook.ActiveSheet.Cells(vRows, 22).Value
objCustomerStatisticsGroup = ThisWorkbook.ActiveSheet.Cells(vRows, 23).Value
objIncoTerms = ThisWorkbook.ActiveSheet.Cells(vRows, 24).Value
objTermsofPayment = ThisWorkbook.ActiveSheet.Cells(vRows, 25).Value
objAccountAssignmentGroup = ThisWorkbook.ActiveSheet.Cells(vRows, 26).Value
objTaxClassification = ThisWorkbook.ActiveSheet.Cells(vRows, 27).Value
' Function call
objCreateCustomer.call
' Get return parameters & display in excel
Set objReturn = objCreateCustomer.Imports("RETURN")
ActiveSheet.Cells((vLastRow + vRows), 1) = objReturn.Value("MESSAGE")
' Error handling
If Err Then
    MsgBox Err.Description
End If
Next vRows
End Sub
I am getting an error...
"No Connection to SAP available".
PLease advise how I can correct this.
thanks
Brian

hi Brain,
        i hope the following URL's will be useful for you
http://www.programmingtalk.com/archive/index.php/t-21399.html
Re: VB and SAP connection with BAPI Active X control
http://help.sap.com/saphelp_46c/helpdata/en/76/4a42f7f16d11d1ad15080009b0fb56/content.htm
Reward points if useful
regards,
Pavan

URL Reporting connecting to SAP R/3

Hello,
We have Crystal Reports that connect to ABAP Function Modules in our R/3 4.7 system as the data source. To minimize the number of user prompts, we use URL Reporting to pass all the required parameters for the report. The one thing we have not been able to do is specify data connection information in the URL. We currently get around this by setting the data connection information (SAP server, system #, client #, etc.) in the Database Configuration for the report in the CMC. The downside to this is that the report is now limited to running against a single SAP client.
Is there a way to specify the SAP connection information (server, system #, client #, etc) in the URL Reporting string? I know it can be done for SQL data sources through the USER- and PASSWORD- commands on the URL, but is there a similar way to specify SAP connection information?
Our reporting environment is BOBJ Enteprise XI 3.1, reports are developed in Crystal Reports 2008.
Thanks,
Byron Clairoux

Hi,
that is not possible. the connection is part of the report.
Ingo

Code for Connection to SAP R/3 and acess data from it

Hi all,
I am new to this java field.Here i have a swing application with 2 input fields.Upon entering the values of 2 inputfields followd by submit button ,a connection to the backend SAP has to be created and the 2 input values has to be given as input and the data related to those fields has to be displayed in the table.
Till now i never created connection to SAP using a java application..i know only connection to Oracle..Can any one please help me out in this
Regards
Padma N

To get things straight: both Oracle and SAP are company names. It's like asking "how to connect to IBM".
I assume you mean the E-Business Suite and R/3, respectively. In that case, your friendly SAP consultant will gladly help you out.

How to make Portal Application for connecting to SAP R/3(backend system)

Hello Experts,
I need to create a portal application that should connect to SAP R/3 & fetch some data in some table according to some input parameters provided at runtime & display the data in TABLEVIEW control.
Anyone can guide me on this i:e- how to go about it. What things i should know or should be aware of before creating this application. Any PDF documents , any help material, any guidance about the same will be of great help.
Thanks,
Chetan

Chetan,
Webdynpro & Visual Composer ars EP Development Tools.
If you only display BAPI data then go for Visual Composer with requires no coding So I suggest you to go for Visual Composer.
You can also use Webdynpro Java or ABAP to display BAPI data by creating
Adaptive RFC model.
You will integrate Webdynpro applications into EP by creating SAP Webdynpro iView.
*Visual Composer Documents:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/0af7d34a8449e2b722878ce270a747/frameset.htm
*Webdynpro Documents:
http://help.sap.com/saphelp_erp2005/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/15/0d4f21c17c8044af4868130e9f
ea07/frameset.htm
Regards,
Ramganesan K

Requirements related to connect PHP & SAP

Similar Messages

Maybe you are looking for