Rescheduling issue

Hello All,
Scenario is like this
There are 3 requirements of the same material for 3 different dates, letu2019s say 31/07 u2013 qty 1, 14/08 u2013 qty 1, 21/08 u2013 qty 1. MRP has generated planned order and one of the planned order of 31/07, I converted to a purchase requisition and then to PO and changed delivery date as 31/08. Now when I again run MRP the system is generating planned order for requirements of 14/08 and 21/08 but for sufficing the requirement of 31/07, system is asking to re-schedule PO to earlier date (31/07) which is dated 31st Aug.
Now here customer is seeking that system should generate a new planned order for 31/07 requirement and the PO should accommodate the requirement of 21st Aug with a rescheduling message. I am attaching screen shot of MD04 for more understanding of the same.
Thanks in advance.
Regards,
Mayur Phalak

Dear,
I thought you have posted same thread again. Please check my previous posting.
This is due to due to Rescheduling horizon,
Please refer this link,
http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d2c9744af11d182b40000e829fbfe/frameset.htm
Regards,
R.Brahmankar

Similar Messages

Reoccurring Meeting request rescheduled issue

I work on a mixed network with both PC and Macs and have noticed that there is a glitch in iCal when it come to changing a meeting request that is reoccurring. When I send a change to it the people get the email letting them know that I have change the meeting but it will not post on the new day or time, it put it back on the first day the meeting was set up for. Example: Meeting set up for 2 months time every Tuesday at 10am. I have to change the 2nd Tuesday from Tuesday to Thursday at 10am they all get the email cal event notice but when they open it dose not change the event???? Anyone that has a PC gets it but on the Macs it doesn't work ????
PLEASE HELP!!!!
Thank you in advance,
Michael Reed
Help Desk Administrator
Mac/PC Technician
Direct Media
200 Pemberwick Road
Greenwich, CT 06830
Phone: 203-532-3701
Fax: 203-532-3821

Hi,
This issue has been fixed in Outlook since Build 14.0.7119.5000.
To fix this issue, please install the following hotfix package:
http://support.microsoft.com/kb/2878254/en-us
It's recommended to keep your Office updated so that you can get better user experience.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Issue in V_V2: Can system rescheduling the sales order with out stock

Hello All,
I created sales orders with one material. For that material the stock is zero now. The system has not confirmed the qty in sales orders while creating.
After that as per the client we ran the V_V2 for rescheduling, but system has not rescheduled any schedu lines in any sales orders.
Is it due to lack of stock?
One more point is we do not have Delivery proposal option in sales order. Only One time delivery option.
Is it due to this setting?
Please help me to solve this issue.
Regards
Lakshmikanth

Hi
Because there is checking rule set at order level , thats why once stocks is not there due to unavailabilty of stocks system not allow to go for V_V2.
for this u hav to deactivate under oVZ8/9
thanks
mk

SQL Server upgradation Issue : 2012 to 2014. A job step received an error at line 1 in a PowerShell script. The corresponding line is 'set-executionpolicy RemoteSigned -scope process -Force'. Correct the script and reschedule the job.

Message
Executed as user: CORPTST\XXXXX. A job step received an error at line 1 in a PowerShell script. The corresponding line is 'set-executionpolicy RemoteSigned -scope process -Force'. Correct the script and reschedule the job. The error information returned
by PowerShell is: 'Security error. '. Process Exit Code -1. The step failed.
I receive this error during the sql server job 'syspolicy_purge_history' execution when sql server got upgraded form SQL Server 2008 to 2014.

Hi Vishnu,
According to the error message, it also occurs in SQL Server 2012. Here is a feedback about the error in the link below.
https://connect.microsoft.com/SQLServer/feedback/details/754063/sql-server-2012-syspolicy-purge-history-job-step-3-fails-with-security-error
To resolve this issue, please change the value of the following registry key from ‘RemoteSigned’ to ‘Unrestricted’. For more details, you can review this similar
blog.
HKLM\SOFTWARE\Microsoft\PowerShell\1\ShellIds\Microsoft.SqlServer.Management.PowerShell.sqlps120\ExecutionPolicy
Thanks,
Lydia Zhang

Work order rescheduled due to nonexistent weather issues

Hi egaito,
Apologies for the delay on getting this done. I've put in a request to see about coming out sooner for this. You will be contacted with an update.
Thank You

Just wanted to follow-up because this has gotten a whole lot more ridiculous. I got a call about escalating my issue with a direct number to a representative. Unfortunately she doesn't answer her phone and her mailbox is full so it's a dead end. So I wait till today when my work order was rescheduled and called in the afternoon. It was still on the schedule and I was told it would be done by 8pm. Well I just called back again because it doesn't look like they did anything. Apparently there's no record of a work order on my account anymore. So here I am back at square one, with a new appointment scheduled that they'll probably try to charge me for. The guy I talked to on the phone said he would make it high priority and I'd get a call tomorrow. If I don't get that call I'm definitely canceling though. A week to connect my internet service is beyond absurd.

V_V2 Rescheduling Sequence Issue

V_V2 Rescheduling is not working properly for sort order sometimes. I set sort order by default - Document category > Delivery Priority > Date (Sort item by date of creation) > Document Number and Document item. And excute V_V2 as daily batch job. And for example, I created two OR orders A and B (A before B). The delivery priority of them is the same. Now, I only have enough stock for order A. Sometimes, system will remove the confirmed qty from A and move the stock to B, during V_V2 batch job. Does anyone have idea why system is working in this way? Thanks!

Also, ensure all the line item creation dates are accurate. There are times in my company where sales order B will take stock allocated to sales order A, even though sales order A was created before sales order B. The reason could be that a user created a new line item on sales order A, and even though the header date for sales order A was created before B, the line item date for A occured after the line item date for B. Hope this is clear.

Performance Issues with SDV03V02

Hi,
The order rescheduling program(SDV03V02) runtime is too long. We have searched for notes in the OSS database but have not found any suitable notes. One of the oss notes suggested implementing indexes on VAPMA and VBUK but that has not helped either. We are thinking of writing a Z program which would submit the standard SAP program into multiple jobs-The Z program would schedule the program into multiple jobs using different sets of materials.
Has anyone faced runtime issues with this program? Any other suggestions?
Regards,
Aravind

Aravind,
the program invokes availability check for all backourders based on material.
I would check the following :
- how many documents it's going to process ?
- if the number of documents is too big and there are really old docs - you may have a problem with order status update (your order never goes to "complete" status even if all items are rejected or fully shipped - just an example)....
- if you really need to reschedule many orders - you'll have to consider parallel rescheduling.... BUT it's not as simple as submit parallel jobs for different materials (material ranges)....as jobs will very likely fail due to a contention.
- another option to speed up the process (may really help) is to change timing of all order outputs which are set to process immediately to '1' -> to be processed via RSNAST00, then schedule a job after your rescheduling is complete to process all these outputs. It may really help as you separate output processing from avail.check/order save.... and since same order may be saved several times during rescheduling -> it may really help. You can do it by defining a "timing" routine for your output types.
- always good to run SQL trace or to just monitor this job in SM50 to see what it's doing... OR run it under new USER ID and check statistics for that ID to see which programs/tables took the most time.
Would be good to measure an average order processing time (check how many orders were processed in this job... I hope it has this info in the spool or you can calculate it based on messages in job log). It may help to determine if the problem is casued by too slow order processing or just by increased order volume.
There are many options to look at regarding rescheduling...but I would start from order processing performance.

Customer service issues

I am having significant issues getting u-verse installed with the rate and equipment promised when I signed up (which have record of via chat). One the day prior to installation I talked to an Esther in Customer Service in San Antonio who confirmed my appointment and guaranteed a 1TB DVR would be delivered with the installer for installation. The installer (Tracy Pickett #TP8522, super polite) came to my house on 6/17 without the 1TB DVR I was promised and the service was provisioned for neighbor’s house. That was going to double the time for installation, plus no 1TB DVR, so I told the installer I would reschedule. That day I talked with a difficult character who told me he was in "Ghalla" (India?) named James who was difficult to understand and extremely rude, but he promised me a 1TB DVR, but could not get the agreed upon month rate correct (again guaranteed in writing via chat). He told me it would be $25 more per month than agreement. He then transferred me to a Kim in Retention in Jackson, MS who got the price right, but included a $49.95 install fee with 1TB DVR. She said I was all ready and good to go, but she was going to talk to her supervisor about getting the installation fee waived and additional credits for my troubles that day and with James who she agreed was very difficult to deal with when she conversed with him. She promised a return phone call from supervisor by end of the day…13 days later, No Call. The following week I called Customer Service again and after going through several people ended up with rep named Princess in Retention in San Antonio. She was not the friendliest character telling me AT&T did not even offer a 1TB DVR and that I would need to check with DirecTV since they are the only provider that offers such equipment. I proceeded to tell her of my original chat, conversations with Esther, Kim and James as well as my installer, Tracy, all telling me a 1TB was available. While talking on phone I googled it and found it was available, but she still continued to deny availability. Finally she contacted technical support and told me it was available, but I would have to talk to the sales department. I told her I was working with her, so she contacted sales which stated I would have to take a regular DVR and then “request” a 1TB DVR after installation. I told her that was not going to happen since it was promised to me up front and what’s to say I was going to get it once service was ongoing and I was locked in. She stated she would have her supervisor, Roland, call me within one hour...still No Call. Essentially I want to switch to your product from a competitor, but your employees are making it extremely difficult. I treat each one of them with the utmost respect, but obviously it’s not reciprocal. This is my last effort to get service, if this doesn’t work out I am going to just cancel and stay with my current provider. Please help!

That the exact problem w/chat, everything gets jumbled up. ATT does have a 1TB DVR, but only for Gigapower users, no one else.
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more

Interesting and an imporatant issue at sales order schedule line.

hi all,
interesting and an imporatant issue at sales order schedule line.
i created a sales order with 10 qty.and the system proposed a two schedule lines.
let's say to order created date is 27.11.2008.and the requested delivery date is 27.11.2008.
but the stock is not available today then the system proposed two more schedule lines apart from the 27.11.2008.so now there are three schedule lines like below.
schedule line date                      Material availabilyt date   delivery date
27.10.2008 with zero quantity.
28.10.2008 with 5 qty.                28.10.2008                     29.10.2008
02.10.2008 with 5 qty.                02.10.2008                     03.10.2008
now the delivery and pgi already for the schedule line 28.10.2008.
then when i run the availability check on 01.11.2008 system is over writing the material vailability date as today at the scheduleline number two.
now i can able to view only two schedule lines only.
schedule line date                      Material availabilyt date   delivery date
28.10.2008 with 5 qty.                01.11.2008                     29.10.2008
02.10.2008 with 5 qty.                01.11.2008                     02.11.2008
now my concern when we reschedule the avalability check it should notchange the Material availability date of the schedule line which i already delivered.
Regards,
sheshukumar

can any one repsond for this.....

Expired Scheduling Agreements still in Credit Check / Rescheduling

Hello everyone,
I am running into an issue with expired Scheduling Agreements on the SD side (VA31,VA32, etc.). There are many Scheduling Agreements that expired on a range of dates from 2005 to 2009, SA's that customers will not send JIT delivery schedules for anymore and are basically just out in the open and unused. The issue is that these Scheduling Agreements are still being taken into account when a credit check is run. Additionally, when our rescheduling jobs run at off-hour times, the system is still attempting to allocate materials to these orders. The main problem with this is that it causes additional processing time for the rescheduling job.
The current business process for these old Scheduling Agreements is to reject all the line items within the applicable SA, and as a result our rescheduling jobs avoid these orders, and they do not show up in VKM4. However, the Valid To date in the SA is clearly in the past and I'm wondering if there is a way to have these closed without having to reject every line item.
Any help would be greatly appreciated.

Andy
For credit check I would recommend:
1) Using your own routine to exclude expired sch agreements in OVA8- Document controlling- 'No credit check' field.
2) rejecting at header level/ using "mass'.
For Rescheduling
1) Using button "Unconfirmed documents required" checked.
2) Creating your own copy of the program SDV03V02 including document number, document type in the selection fields and creating a variant excluding specific, expired Sch Agreements. To reduce processing time, you may also try the 'divide and rule' policy and execute several parallel/serial runs by using ranges of materials, plants, document types. I am sure you might have already tried this.
Hope this helps.

Rescheduling of Unconfirmed Sales Orders

Dear All,
I was trying to reschedule the sales orders whose schedule lines are not confirmed using a report SDV03V02 (V_V2) but that picks up the confirmed open sales orders also in the process of rescheduling.
My issue is I wanted set some indicator where it can pick only unconfirmed sales orders and not all the open sales orders.
This program is been run in Background daily once so I can not put any specific material number also.
Please let me know if there is any alternative method to reschedule only unconfirmed sales order other than going for a Z program with required selection screen.
Appreciate your quick reply on this
Thank you in advance
Regards
Mahesh

Hi
V_V2 is a collective rescheduling program as such it will do a reschedule all sales orders except for the ones with the fixed date and qty indicator set. You alternatives are:
1. Take a copy of the V_V2 program and have a programmer change it to suit your requirements
2. Set the fix date and qty flag as default in your ATP config and use transaction MASS to set your existing orders. Then the next time you run V_V2 it will ingore all your confirmed schedule lines. However, this may cause you as much trouble elsewhere than it solves.
3. If the number of sales order is not high you can manually allocate the quantities by using transaction CO06
Frank

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Issue of Schedule Lines in MRP List

Hi,
We ran MRP for one material, we observed MRP generated 3 schedules lines with respect to single Schedule Agreement with exception message as 30(Plan Process according to schedule).
Schedule line 1 --- Delivery Date is 10/06/2011 in MD05, Delivery date in Schedule Agreement is 10/04/2011,Rescheduling date is 08/27/2011 Exception message is 30(Plan Process according to schedule(08/27/2011 08/25/2011).
Schedule line 2 --- Delivery Date is 10/06/2011 in MD05, Delivery date in Schedule Agreement is 10/04/2011,Rescheduling date is 10/05/2011 Exception message is 30(Plan Process according to schedule(10/05/2011 10/03/2011).
Schedule line 3 --- Delivery Date is 10/06/2011 in MD05, Delivery date in Schedule Agreement is 10/04/2011,Rescheduling date is 09/08/2011 Exception message is 30(Plan Process according to schedule(09/08/2011 09/06/2011).
But in Schedule Agreement, we are seeing that all the 3 delivery schedules with delivery dates as "10/04/2011" as GR Processing time is 2 days.
Can anyone tell why the MRP has not updated the Schedule Agreement with the new Delivery dates proposed by the exception message 30 in MD05 list.
Thanks in advance.

Hi Vivek,
I am not knowing how to upload the details.
Please find the Material master details for the issue material:-
MRP type- PD, Lot Size - ZE - Period lot size, Sched.2, Split ( Config Setting of this lot size key is provided below),
Minimum lot size-2,000.000, rounding profile-2,000.000, Material type- ROH,Safety Stock - 1224, Pld Delivery time -63 days, GR Processing time- 2 days, Planning Calendar-ZEX.,Consumption mode     2,Bwd consumption per. 999,Fwd consumption per. 999 ,Mixed MRP --      1, Strategy group =      Z1 ( Final assembly & assembly level, i.e., combination of 40 + 70))
Config Setting of Lot size key- ZE are :-
LotSizeProced. P Period lot-sizing procedure ,Lot-size ind.-   K Period lot size as in PPC planning calendar
Scheduling --    2 Period end := delivery date ,No. of periods 1, Splitting Quota - Checked ,Last Lot Exact- Checked.
b) Scheduling Agreement has 3 delivery schedule lines with Delivery Date as "10/04/2011" and scheduled quantities as 2000,1617 and 2000 EA.
As per the MD05 screen,for this material, corresponding to these 3 schedules lines, we have exception message -30 with different delivery dates. Our Question is why MRP does not updated the Delivery dates for the schedule lines in the scheduled agreement proposed by these exception message.
Can you please let me know whether this information is sufficient for you to understand my problem?.
Thanks in advance.

Schedule a webi report to email issue

Hi,
A webi report was scheduled to run and send exel file to email one time. The instance is in a status of "Running" for more than 24 hours. When checked the instance details, it said "waiting for scheduling to complete. Job ID: 15,786, name:[Report Name], kind:Webi in Pending state (FBE 60509) [0 recipients processed.]". After a day passed, the schedule failed. And in the Publication Admin Log, it said
2011-10-17 16:55:22,173 INFO [pool-4-thread-4] BusinessObjects_PublicationAdminLog_Instance_15786 - [Publication ID # 15786] - Running publication instance.
2011-10-17 16:55:22,251 INFO [pool-4-thread-4] BusinessObjects_PublicationAdminLog_Instance_15786 - [Publication ID # 15786] - The global delivery rule for this publication was met; publication processing will now begin.
I don't know why it failed. Is there any option needed to be set such as timeout?
All destinations have been set and enabled. Have restarted and reenabled could not help. A webi report run interactively fine.
We are on version:
BusinessObjects Edge BI 3.1 SP4
Windows Server 2008 R2
SQL Server 2008 R2
Thank you.

Hi Ginelle,
Most likely this problem would be caused by:
1. Wrongly configured email destinations on the Destination Job Server, Webi Job Server and Publication Job Server - you can check in the CMC - Servers area.
2. The source report - check it can be refreshed ok, it could be there are objects which Business Objects does not like. Test by removing fields and rescheduling to see if you can identify which field is causing problems.
3. Also try resaving the source report under a different name and rebuild the publication with this report. Some older reports can become "corrupt", resaving\refreshing can help.
4. Check to see if the source report has any recurrences set, it could be there is an issue with the Job Server waiting fopr a recurrence to run.
I hope this is a very helpful answer to you.
Kind regards,
John

Help! Has anyone else had this? Re: caller ID Issu...

Dear all,
I would understand if you didn't have the time to read my extensive notes below so the short version is the following (if you wanted a good laugh at my expense and a diatribe on the perils of switching ISP then do read it).
My caller ID doesn't work.
Having switched to BT on February 10th it is now two months and my caller ID still doesn't work.
I have called and reported it several times. I have gone through all the line testing. I have plugged my phone into the master socket. I have dialed #234# and it says it's active. I have even bought a new BT phone and tried that.
BT can see no fault on the line. It says caller ID is active. But no caller ID's appear on either of my phones when someone calls in. It just says 'incoming call'. I am convinced it is not the phones. There is no menu option to activate caller ID on the phones. They're gooid quality phones and are supposed to automatically work 'if caller ID is active on the line'.
I am about to call BT again and ask for an engineer visit. But on their last email to me it said "Please note: we'll provide a working service up to and including the main socket in your house. If your problem isn't with your BT service, you might need to pay a £130.00 repair charge. So it's worth checking your own equipment before the visit and cancelling the visit if you fix things."
Before I risk the £130 charge, has anyone else experienced this kind of fault with caller ID?
My extensive notes on my user experience switching from Virgin to BT
Finally decided to get Infinity end of Jan and phoned up Virgin on 21st January to request a MAC code and see what penalty fee I would have to pay for cancelling early. Guy was very helpful, gave me the code and said I would have to pay £44 penalty. Incidentally he also warned me to phone up Virgin after the switch had taken place to ensure everything really had been cancelled.
I subsequently received several emails from Virgin. One was the Mac code – great! Two were duplicated ‘disconnection of phone’ emails. There was no mention of disconnecting the broadband. Which was odd but who am I to guess how this works?
I rang BT and set everything up to be switched over on Tuesday 7th February, which coincidentally was the time when I was using up the last of my annual leave. Engineer appointment was arranged. All seemingly went smooth as! Great!
I subsequently received several emails from BT as well, confirming all the arrangements – great!
Home hub scheduled to be delivered on Friday 3rd Feb to be ready for engineer on Tuesday 7th. I had arranged for the hub to be delivered to my work address. It did not arrive and this was the first black mark against BT. There was an attempted delivery to my home address and we weren’t in…we were at work…hence why I’d asked for it to be delivered there. Hence I had to go to the local sorting office on Saturday 4th Feb to collect it in person. No worries I thought…BT Infinity would be worth it!
So I am enjoying my annual leave and on Monday 6th Feb I get an email and text message to say sorry there is a delay – we will contact you Wednesday 8th Feb to reschedule the engineer visit. WHAT!!!!!? I am on the phone urgently asking what has happened? Will this affect my connection currently? I am told not to worry and they will get back to me early on 8th Feb. Represents second black mark against BT. Don’t make appointments 2 weeks in advance and then cancel the day before. It does not make for happy new customers. But I am too far into the process now and have no power to intervene. So I wait.
Tuesday 7th arrives. No engineer and no Infinity. Virgin send me an email saying my phone is now cancelled and disconnected…still no mention of cancelled broadband like you would expect.
Wednesday 8th Feb. I receive a text and email from BT to say my new engineer visit is 20th Feb. WHAT!!!!!? That is unacceptable when I have taken my last bit of annual leave to be off for the original scheduled visit. I can’t take off more time 12 days later. I phone up and communicate this to BT. Helpful guy says he’ll try and arrange something else and thank god that afternoon he comes through for me and I have the engineer coming, finally, on Friday 10th Feb.
Get emails from BT on 10th and 14th Feb saying broadband is now active and order is complete respectively. No mention of phone which is weird but it still works so what the hell.
On Friday 17th Feb I get an advanced DD notice from Virgin. I am expecting this to be the final bill including the £44 penalty fee. It says they’re taking £30.35 beginning of March. Er….what? I phone them to have the bill deciphered. At the same time I wish to check that I am all cancelled with them. I find out that the phone is cancelled but the Broadband hasn’t been. Honestly I can’t believe this. I demand to know why this is when I’ve been using Infinity for the last week. They blame BT and say BT used the MAC code incorrectly. I immediately cancel it as they confirm I’m still paying for Virgin Broadband. Two advisors are unable to explain the bill to me. I am finally put through to what I presume is the finance section and I speak to ‘Joanne’. She seems to have a brain and is helpful. I need to know how much I need to pay to settle everything, including any penalty fees. I really want rid of Virgin. Joanne tells me that all I owe is £6.96. I query this as that makes even less sense than the first bill. She says that is all that is outstanding on my account. I presume my cancellation has gone through on their system and that is all I owe. I am not going to argue anymore. I pay the £6.96 (payment reference 020835) there and then and I ask Joanne can I now delete the direct debit from my bills account? I know how these things will go and I do not want Virgin taking money from my bills account without explaining anything. Joanne agrees that I can delete the direct debit as I have no outstanding amount on my account. Ok then…I delete the direct debit. As of 02/03/2012 as I write this I have not heard anything more from Virgin.
Back to BT. Having got off the phone from Virgin I bite the bullet and decide to phone BT as well because a) there is no 1571 service on my phone b) there is no caller ID and c) I can’t login to their swanky online system – laughably it says my username, which they have repeatedly sent me in their emails for three weeks, is not recognised. I get through to an Indian call centre and explain these three issues. They are quite helpful and I can mostly understand what they’re saying. The guy says they will activate both phone services immediately – I can’t be bothered to ask why they weren’t already active? He has to transfer me to someone else for the online thing. He transfers me and to cut a long story and lots of waiting with god awful standby music – they can’t sort it out that day as there is some inexplicable software issue and can I call back another time. Ok I’ll let them off – just make sure my phone service is fully operational.
I subsequently get two emails from BT telling me the 1571 and caller ID will be active by 20th Feb in 3 days time.
Note that date of 20th Feb. That was the date that was referred to when they’d cancelled my 7th Feb original engineer visit. I have a strong feeling that all this is due to them changing that original engineer visit.
Note as of 02/03/2012 caller ID doesn’t work on my phone and I am still unable to login to online BT. They did activate 1571 though. I suppose I should be grateful.
It is now 24/03/2012. I have spent the time putting up with no caller ID. I have just realised today I had to register with MyBT on the website which I have now done, but I’m still not sure if this is correct given that they sent me a username and password previously which didn’t work when I tried to login. Anyway I have set it up but still can’t view my bill. Perhaps that will clear. I did buy a BT phone, yet another **bleep** phone, 4th in two years, in the hope that it would miraculously fix my phone fault caller ID but to no avail. It still doesn’t work. I have just phoned BT India again and done all the steps over the phone with the guy, who can’t see a fault on the line when he’s tested it. He has handed it over to the engineers with a promise that it will be fixed by 29th. I won’t hold my breath. If it isn’t fixed it will be a matter of a huge complaint letter. Update: on the evening of the 24th I received a text and email to say it had been fixed. But it hasn’t. It still doesn’t work. Oh BT how you play with my nerdy heart promising simple things and utterly failing to deliver!
01/04/2012: PhoningIndiaabout the caller ID again. Its April Fools I have to try for a third time don’t I? Right so the lady I spoke to didn’t make me go through all the checks from her script, which I appreciated. To be honest I didn’t give her a chance – I began the call and didn’t stop talking and said:
I didn’t want to dial the #234# thing
I didn’t want to try another phone
I didn’t want to do a line test
I couldn’t see any alternative other than an engineer visit
She went off to speak to her supervisor and said she’d call me back. Amusingly, while I was waiting for her to call back I received a call from BT India asking me to rate the efficiency and politeness of the woman I just spoke to. I refused to do this pending the outcome of my problem. Come on BT don’t ask me to give positive feedback when this problem has been going on for two months. Anyway the original lady called me back finally and said her supervisor was escalating the problem to 2nd tier support and they would have it fixed in three days and she would again call me back to make sure everything was ok. I am not holding my breath and there was no mention of arranging an engineer visit. We shall see what transpires.
It is now 10/04/2012. I have never received the call back. I did receive a text and an email to say my fault had been fixed. But of course it hasn’t been fixed. Amusingly, at the bottom of the last email there was this statement – “Please note: we'll provide a working service up to and including the main socket in your house. If your problem isn't with your BT service, you might need to pay a £130.00 repair charge. So it's worth checking your own equipment before the visit and cancelling the visit if you fix things”. So it’s my fault? Before I call back again I am going to post on the BT help forums and see if anyone else has had this problem.

Hi AP_In_Surbiton,
I am really sorry that you have had so much trouble getting your Caller ID up and going. I'll be happy to help you out with this and get it working for you.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Rescheduling issue

Similar Messages

Maybe you are looking for