Reset and it bricked

Hi all.
Earlier today i decided to start fresh and clear my ipod. on my ipod, i went to settings, reset and then erase all content and settings. When it was done, i rebooted my ipod and it came up with the apple logo and then the loading symbol underneath, and even when i hard reboot, this keeps coming up and freezes. I cant even connect to itunes now! Can someone help me please????

hi,
i have the same problem. did you ment this: For the iPod touch models, which do not have a Disk Mode, "press and hold the sleep/wake button and the home button at the same time for at least ten seconds until the Apple logo appears" again.
i tried already a few times, didn't work, i still only see the apple logo...

Similar Messages

  • Screen Keeps Dying - Tried Hard Reset and Factory Reset

    I have a playbook which I recieved last spring and lately it has been giving me a lot of problems with the screen.
    Starting around early December, the screen would not turn on after it had gone to sleep unless I pressed the power button on and off a couple times. Then, a few weeks later, that trick stopped working. I tried doing a hard reset where you hold down the power button and volume keys until it forces a hard reset. That worked a couple times also, then stopped working around the end of December.
    Two days ago I did a factory reset by reinstalling the firmware. The device worked for a while, but today it is back to its same old problems.
    I should note that when I say "the screen didn't turn on" in almost every circumstance, the backlight would turn on and a few pale lines would be displayed on the screen.
    Is my playbook completely dead? Does anyone have any ideas what else I could do?

    Lost_at_Sea wrote:
    Try doing a search on this forum or on Crackberry.com. There was a procedure written on downgrading the OS.
    Yes I know, I wanted Johnpiz to explain the suggestion. You have to root the Playbook and render the warranty void, break the agreement you made, and risk bricking the Playbook. Not advised in this forum any more than recommending jailbreaking on the Apple support forum.  
    And it will not fix the problem either.

  • WiFi only works close to router, DNS fail, Signal Bars present but Safari says no Internet, I've deleted and readded through to reset and full reset, I had no problem with 4.3.2 only 4.3.3 both my iPhone4 and my iPad2. I am now beside router - no problem

    Help
    WiFi only works close to router, DNS fail, Signal Bars present but Safari says no Internet, I've deleted and re-added through to reset and full reset, I had no problem with 4.3.2 only 4.3.3 both my iPhone4 and my iPad2. I am now beside router - no problem, but go 20 metres and WiFi becomes unstable. Only way to get either to work is disable WiFi either as a Hot Spot or turn it off and use the 3G connection. This worked with 4.3 & 4.3.2 what has gone wrong? I raised it at the Apple Store in Belfast as a problem but was told that there was no problem with Apple but I must have a faulty router - yeah - that's a lot of faulty routers, my home, my office, my holiday home, Starbucks, my friends house, my son's house. I've tried all the 'fixes'. I think it is a plan to force us to buy Apple Routers

    Two ways out, I added two more Belkin Access Points in my house in Spain so that I'm not more than 10Mtrs away, (Reinforced Concrete & solar glass 2010)
    I bought 3 Apple Airports, 1 x Extreme and 2 x Express (1 as a hard wired AP, 1 as an extender) for my other house (Brick construction 1930's)
    Everthing now works perfectly, as I said 'an apple plot', so either blast them with signal or visit your nearest apple store.
    Early beta iOS5 (iPad) is also much inproved in Beta 3, I have not had any problem with 'Lion'
    Happy hunting!
    john

  • Resetting and reversing a cleared document

    Hello
    I want to reset and reverse a customer clearing document. The clearing document which is 54203512 was posted and matched against the customer invoice in the previous period. When reversing and resetting the document in transaction code FBRA, a pop up screen u201CReversal Datau201D appears. The reversal reason is specified as 01 (Reversal for incorrect posting), posting date is todayu2019s date however the original clearing document 54203512 was posted in 05.09.2008 and in previous period. Click on continue.
    The document is not reset and reversed and I am getting the error message u201CReversal reason 01 only permits posting date 05.09.2008u201D. Not sure why the document is looking at the posting date of original document even though I specified the reversal date as 08.10.2008. Can a document be reset and reversed in different periods?? Or does this cause any issues or problems? Or is this a bug??
    Thanks in advance
    Evelyn

    Hi,
    There are only 2 controls allowed for Reversal reasons:
    1.  Negative posting
    2.  Alternative date for posting
    The symptom you have mentioned would be of a control from somewhere else, i.e. either a user exit or a validation.  An order reason can only restrict it to current date or allow any other date.  At least that is what I have experienced.
    Cheers...

  • My Ipod Classic (160G) no longer synchs completely with iTunes (93G).  Have reset and restored to no avail.  AM about to try roll back to a previous version of iTunes, which has been on auto update.

    My iPod Classic (160G) used to sync flawlessly with iTunes (93G).
    Recently, there seem to be fewer folders syncing.  In particular, it is not syncing more recent adds.  It also occassionally refuses to sync at least one mp3 downloaded from  Amazon.com, giving an unable to sync message with an error code or 50.
    I'm running iTunes version 10.7, and the software (2.04) on myiPod is current.
    I only use the iPod for music.  I have only one playlist.
    Reset and restore did not fix the problem; I'm considering rolling back to a previous version of iTunes.  Are there any other  ideas to consider? 
    Please advise.
    Thanks,
    R

    giving an unable to sync message with an error code or 50
    See this older thread for some possible solutions.
    https://discussions.apple.com/thread/3924425?tstart=0
    iTunes and its sync process with your iPod have been know to choke once the amount of data that needs to be transferred, replaced, or updated, reaches a certain size limit in GBs.
    B-rock

  • Thanks for responding.  Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all.  I had numerous apps, music and videos on this touch.  It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

    Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
    Can you help me?
    Thanks

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • My Ipod has reseted and i lost all my music how can i get it back?

    I have somehow made my ipod reset and i lost all of my music how can i get it back on my ipod?
    I need help.?!?!?!??
    and calling the 1-800 number didnt help.

    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Iphone 4 front camera not working even after reboot,resets and restore.

    i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
    Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

    If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
    How to back up your data and set up as a new device
    Apple - Support - Service Answer Center

  • My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

    My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

    I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
    http://www.apple.com/retail/geniusbar/

  • My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

    my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
    thanks!

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • I recently purchased FaceTime from the Application Store. After approx. ±10 meg, the application resets and starts downloading again. I have tried to download it at different times of the day but with the same results. I have been in contact with Apple su

    I recently purchased FaceTime from the Application Store. After approx. ±10 meg, the application resets and starts downloading again. I have tried to download it at different times of the day but with the same results. I have been in contact with Apple support and have tried different options with the same result. I cannot download a new Version because in my Purchased List the applicaiton (FaceTime) is still there, and because I have halted it it tells me to resume. I can’t, because the same thing is going to happen. I have tried all the various troubleshooting tips supplied by my ISP and also Apple Support with no luck. I am currently working on a IMac OS 10.6.7. Has anybody got any ideas? Any suggestion would help. Thanks

    Amol Soni wrote:
    As I said, I tried everything what the manual says, but hard luck. I have taken an appointment for today, lets see what happens.
    Also there is no activity on unit when I use the remote. The unit is stuck on the first page itself where we have to choose the language. The unit seems to be fine to me but the real problem is remote does'nt have activity. The IR is not responding while pressing any of the button.
    Good luck with your appointment.
    Not much consolation but even new products can have issues and might need a trip to a store to return/replace.
    The reason i asked about the LED on the AppleTV is that occasionally it thinks it's paired with a specific remote and ignores others - the unpair keypress I described is quick and free.
    AC

  • I reset and erased my iphone 4 and now I can`t reinstall it! After I choose a language, region. and wifi, it says Please, try again later or contact customer care

    I reset and erased my iphone 4 and now I can`t reinstall it! After I choose a language, region. and wifi, it says Please, try again later or contact customer care. I tried to do with iTunes, and iTunes even sees this iphone, but it`s like blank, there is nothing I can do in iTunes. It uploaded last software for this iPhone 4, but when it tries to do the reserve copy of iphone first, it shows a mistake. And ask to disconnect and connect the device again, which, obviously, doesn`t help.

    This usually happens if the phone has been Hacked / Jailbroken / Modified...
    Is this the case...?
    If so...
    Then... Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743

  • My husband used my icloud, apple ID info on his iphone 5. we have tried deleting with no luck. Ive done a factory reset and still it won't delete his email as icloud on my phone now.

    We accidently set up my icloud email and apple id on my husbands new ihpne 5. Now on my Iphone 5 I can't get rid of it. I have deleted the account - nothing. I have done a complete factory reset and nothing!
    Everytime I access my email it states my apple id and icloud settings are incorrect. HELP!

    HI,
    It may pay to bookmark this page.
    http://www.apple.com/support/systemstatus/
    8:40 PM      Wednesday; April 10, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HT204053 I previously use an apple id , I have tried to reset and even changed the id on the settings on my phone but each time I try to update an apple apps , I keep getting the same old ID on my phone. What do I do?

    I previously use an apple id called *** @hotmail.co.uk, I have tried to reset and even changed the id on the settings on my phone but each time I try to update an apple apps , I keep getting the same old ID on my phone. What do I do?
    <Email Edited by Host>

    Is the same true for using the App Store with a desktop machine? Someone installed a program on my machine (the IT department) and I would like to install the updates but it was installed under a different Apple ID. This anyone know how to change, or work around this particular issue?
    Any thoughts or suggestions are greatly appreciated.
    Cheers

  • HT1414 My wife gave me her older ipad. I have reset and removed all data. My Apple ID (Ipod touch) is not an email adress, but when I try to stu up the ipad it asks for my Apple ID, then tells me that for security reasons the Apple ID must be in email for

    My wife gave me her older ipad. I have reset and removed all data. My Apple ID (Ipod touch) is not an email adress, but when I try to stu up the ipad it asks for my Apple ID, then tells me that for security reasons the Apple ID must be in email format?

    Change it to an email address.
    -> https://appleid.apple.com/

Maybe you are looking for

  • If I erase my phone completely  and start it over as a new phone does my old backed up memeory get deleted?

    I ask this because I'm looking to erase my phone and start it over completely as new, I want to know by me doing that does that automatically erase my backed up memory or does it just keep it?

  • Select column from user.table

    Hi, I have 100 users. Each one has same table let's say tableA. I want a query that return back the value of a given column in that table for all users with their names. I thought about a join between dba_users (username) and that table. Basically I

  • Purchase Order - service specification - outline hierarchy

    When creating a purchase order for services, I am entering services lines in the SERVICES TAB, I would like to structure the services in the service specification into a hierarchy of outline levels. How I can do this?  How can I activate the Service

  • Get Layout details during run time of the report

    Hi floks,           We are downloading the ALV ouput data through a customised button. Presently, it downloads all the data from the Internal table that is passing to the function module. But the requirement is it should download only those fields wh

  • MS Office (Excel) Toolkit - trouble formatting cells

    I have the MS Office toolkit 1.1 and LabVIEW 7.0. I am using 'Excel easy table' to write arrays of strings (number strings and titles, etc.) to a spreadsheet but I also want to control the number of decimal places and the number format. I want to use