Reset - evaluate or..

Post Author: shedevel143
CA Forum: Formula
I have a formula : IF {Customers.PriceLevel} = 0 THEN {LineItem.PriceLevel1Amount} ELSEIF {Customers.PriceLevel} = 1 THEN {LineItem.PriceLevel2Amount} ELSEIF {Customers.PriceLevel} = 2 THEN {LineItem.PriceLevel3Amount} ELSEIF {Customers.PriceLevel} = 3 THEN {LineItem.PriceLevel4Amount} ElseIF {Customers.PriceLevel} = 4 THEN {LineItem.PriceLevel5Amount} ElseIF {Customers.PriceLevel} = 5 THEN {LineItem.PriceLevel6Amount} ElseIF {Customers.PriceLevel} = 6 THEN {LineItem.PriceLevel7Amount} ElseIF {Customers.PriceLevel} = 7 THEN {LineItem.PriceLevel8Amount} ElseIF {Customers.PriceLevel} = 8 THEN {LineItem.PriceLevel9Amount} ElseIF {Customers.PriceLevel} = 9 THEN {LineItem.PriceLevel10Amount}
This works if only I on the 4-5 lines. I get no error when I save the formula and dint get data. Also, when it does work it give the right price but I need it to reset or...
My report should looks like this:
customer id               Price level     Item Id    Price level amount
Joe blow                       0                xxx-000     55.00
Joe blow                      0                 xxx-222    65.00
Helen Monkey              1               xxx-000     60.00
Helen Monkey              1               xxx-000   .80.00
However, I only get one line item per customer. I assume I need to tell it to reset or evaluate after each item id. Help!!!
thanks in Advance

Post Author: SKodidine
CA Forum: Formula
C'mon Kai, cut the user some slack. If the post isn't clear then no one will respond and the user will realize that perhaps what they asked for isn't clear. These forums are used by CR developers from all over the world and to expect everyone to post their questions in perfect English is not realistic.
You are usually pretty relaxed in your posts, what's going on mate? You seem pretty 'snappy' today!

Similar Messages

Running Total Fields - using formula, but can't get what i want?

Hi All,
I have already searched some forum, but still can't figure out what going wrong. Can anyone help me?, please
I create a view from access named u201CStatementReportu201D and have the following field.
<InvNo>
<CustNameC>
<JobItemNo>
<InvDate>
<JobTypeId>
<JobPrice>
I create three parameter as CustName, StartDate, EndDate, then I create a Group to group <InvNo> as the report detail and a Running Total Fields for calculate the total of <JobPrice>.
So far the report is fine. Showing the grouped <InvNo> and the total amount of <JobPrice>
Then, I want to calculate the <JobPrice> by the condition of <JobTypeId>.
First, I create a new Running Total Fields
Field to summarize = StatemetnReport.JobPrice
Type of summary = sum
Second, I create a formula as following
whileprintingrecords;
global numbervar type1_sum :=0 ;
if {statementRe.JobTypeId} = 1 then
type1_sum := type1_sum + {statementRe.JobPrice};
type1_sum;
After completed the formula, and i press Ok button.
A dialog appear "Warning: Reset/evaluate condition formula contains variables. Do you want to keep it?"
No matter i click Yes or No, I still can't get anything display on the field.
Edited by: manho88 on Mar 9, 2010 9:42 AM

Hi,
Instead of running total use can try this formula.
Place this formula in the details section.
whileprintingrecords;
numbervar jpsum;
if =111 then
jpsum:=jpsum +
else 0;
You can modify this formula as per your requirement.
Hope this helps.

How to clear/reset "Installed Software" in Software Center?

Hello!
I've done a big mistake with my application objects!
I did have two applications in SCCM 2012 with the same MSI-installation package. The reason for this is because i would like to have one that is deployed as Required (with primary device) and one that is deployed as Available for those without primary device.
Then I decided to only keep the available deployment, so i deleted the required appilcation entierly from SCCM.
Not so wise because now all the required installations is stucked in Software Center, at the "Installed Software"-tab. And there is noway to remove it.
So my question is, is there someway to reset or clear the information from software center? Or any other sulotion to my problem? :)
Best regards,
Johan Lång

It seems like it has removed the entries from the software client automatically now. But I still got problem with the main source of the problem. That I cant push out updates via software center.
Let me explain the main problem.
I had app1 as a MSI, and two application objects (AO). One AO as required and one as available, but the same MSI.
After a while I got an integration-application between app1 and another program, as a MSI so i decided to put that as a dependency to app1, but also pushed it out to all users as a required deployment, because it would not install it otherwise, if not the user
did an uninstall and then a fresh install of app1.
And for a couple of weeks ago I got my eyes on "automatically update any superseeded applications" while deploying. So i decided to use that with one AO instead of two (required/available). In the same time an update came to app1, lets call it
app1.1.
This was a perfect time to try my new discover and disabled app1 and superseeded it with app1.1 with a available deployment, with a dependency of the integration-application.
But the clients could not be updated automatically and when the user tried to update it manually via application catalog it get stucked at the last step "evaluate" before it jumps over to Software Center. And nothing else happen. Until it crasches
and warn about "it could not be evaluated" in the application catalog. Sometimes it pops up anyway in software center but it wont continue to install, and if you try to manually start the installation it get stucked at the status "Waiting"
and nothing happens.
If I login with another user I can start the installation manually and it works fine.
If I uninstall the sccm-client and install it back again, the "installed software" will be cleared and I can start the installations manually, so it pops up under "installed software" again. Without any problems.
It also worked to install if i removed the dependency of the integration-application.
So my guess is that something is getting corrupted in the user profile, but I cant find any files regarding sccm in there exept the log file for software center.
I hope you understand abit of what i try to explain :) Sorry for bad grammar!
Regards,
Johan

HT1430 iphone will not reset

my iphone keeps cutting off and now it wont reset itself or turn on any advice

The first step is to evaluate battery seems like it could be the fault. Try to Restore iPhone Firmware with iTunes on computer. If still problem and you have Warranty or AppleCare Coverage make Genius Reservation and take iPhone to Apple for resolution. If no coverage, you can still take iPhone to Apple for Battery diagnostic testing.

OBIEE 10g RPD Paswword Reset not working

I have gotten 2 10g RPDs, the password of which I do not know. I ma trying to change/ reset the password by making use of the technique wherein "AUTHENTICATION_TYPE = BYPASS_NQS;" is uncommented within the NQSConfig.ini file. It does not seem to be working. I have also changed the Default RPD name within the config file to the new RPD alongside ensuring there are no gaps/ spaces in the RPD name which are the common pitfalls.
The strange part is that it did work with another 10g RPD couple of weeks back but is not working with the two RPDs I got yesterday. I have just the client 10.1.3.4.2 installed so eliminates the possibility of the BI server being up and running.
Is there anything else that could be preventing/ hindering this?

Nope. Did not work. Message returned back is that the existing password does not match the RPD password.
I have pasted the NQSConfig.ini file from "OracleBI\server\Config" below, just in case I am overlooking something that you happen to spot that might be preventing the overwrite:
# NQSConfig.INI
# Copyright (c) 1997-2006 Oracle Corporation, All rights reserved
# INI file parser rules are:
# If values are in literals, digits or _, they can be
# given as such. If values contain characters other than
# literals, digits or _, values must be given in quotes.
# Repository Section
# Repositories are defined as logical repository name - file name
# pairs. ODBC drivers use logical repository name defined in this
# section.
# All repositories must reside in OracleBI\server\Repository
# directory, where OracleBI is the directory in which the Oracle BI
# Server software is installed.
[ REPOSITORY ]
Star     =     tsbrit03_VisualBI.rpd, DEFAULT;
# Query Result Cache Section
[ CACHE ]
ENABLE     =     YES;
// A comma separated list of <directory maxSize> pair(s)
// e.g. DATA_STORAGE_PATHS = "d:\OracleBIData\nQSCache" 500 MB;
DATA_STORAGE_PATHS     =     "C:\OracleBIData\cache" 500 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
MAX_CACHE_ENTRY_SIZE = 1 MB;
MAX_CACHE_ENTRIES = 1000;
POPULATE_AGGREGATE_ROLLUP_HITS = NO;
USE_ADVANCED_HIT_DETECTION = NO;
MAX_SUBEXPR_SEARCH_DEPTH = 7;
// Cluster-aware cache
// GLOBAL_CACHE_STORAGE_PATH = "<directory name>" SIZE;
// MAX_GLOBAL_CACHE_ENTRIES = 1000;
// CACHE_POLL_SECONDS = 300;
// CLUSTER_AWARE_CACHE_LOGGING = NO;
# General Section
# Contains general server default parameters, including localization
# and internationalization, temporary space and memory allocation,
# and other default parameters used to determine how data is returned
# from the server to a client.
[ GENERAL ]
// Localization/Internationalization parameters.
LOCALE     =     "English-usa";
SORT_ORDER_LOCALE     =     "English-usa";
SORT_TYPE = "binary";
// Case sensitivity should be set to match the remote
// target database.
CASE_SENSITIVE_CHARACTER_COMPARISON = OFF ;
// SQLServer65 sorts nulls first, whereas Oracle sorts
// nulls last. This ini file property should conform to
// that of the remote target database, if there is a
// single remote database. Otherwise, choose the order
// that matches the predominant database (i.e. on the
// basis of data volume, frequency of access, sort
// performance, network bandwidth).
NULL_VALUES_SORT_FIRST = OFF;
DATE_TIME_DISPLAY_FORMAT = "yyyy/mm/dd hh:mi:ss" ;
DATE_DISPLAY_FORMAT = "yyyy/mm/dd" ;
TIME_DISPLAY_FORMAT = "hh:mi:ss" ;
// Temporary space, memory, and resource allocation
// parameters.
// You may use KB, MB for memory size.
WORK_DIRECTORY_PATHS     =     "C:\OracleBIData\tmp";
SORT_MEMORY_SIZE = 4 MB ;
SORT_BUFFER_INCREMENT_SIZE = 256 KB ;
VIRTUAL_TABLE_PAGE_SIZE = 128 KB ;
// Analytics Server will return all month and day names as three
// letter abbreviations (e.g., "Jan", "Feb", "Sat", "Sun").
// To use complete names, set the following values to YES.
USE_LONG_MONTH_NAMES = NO;
USE_LONG_DAY_NAMES = NO;
UPPERCASE_USERNAME_FOR_INITBLOCK = NO ; // default is no
// Aggregate Persistence defaults
// The prefix must be between 1 and 8 characters long
// and should not have any special characters ('_' is allowed).
AGGREGATE_PREFIX = "SA_" ;
# Security Section
# Legal value for DEFAULT_PRIVILEGES are:
# NONE READ
[ SECURITY ]
DEFAULT_PRIVILEGES = READ;
PROJECT_INACCESSIBLE_COLUMN_AS_NULL     =     NO;
MINIMUM_PASSWORD_LENGTH     =     0;
#IGNORE_LDAP_PWD_EXPIRY_WARNING = NO; // default is no.
#SSL=NO;
#SSL_CERTIFICATE_FILE="servercert.pem";
#SSL_PRIVATE_KEY_FILE="serverkey.pem";
#SSL_PK_PASSPHRASE_FILE="serverpwd.txt";
#SSL_PK_PASSPHRASE_PROGRAM="sitepwd.exe";
#SSL_VERIFY_PEER=NO;
#SSL_CA_CERTIFICATE_DIR="CACertDIR";
#SSL_CA_CERTIFICATE_FILE="CACertFile";
#SSL_TRUSTED_PEER_DNS="";
#SSL_CERT_VERIFICATION_DEPTH=9;
#SSL_CIPHER_LIST="";
# There are 3 types of authentication. The default is NQS
# You can select only one of them
#----- 1 -----
#AUTHENTICATION_TYPE = NQS; // optional and default
#----- 2 -----
#AUTHENTICATION_TYPE = DATABASE;
# [ DATABASE ]
# DATABASE = "some_data_base";
#----- 3 -----
AUTHENTICATION_TYPE = BYPASS_NQS;
# Server Section
[ SERVER ]
SERVER_NAME = Oracle_BI_Server ;
READ_ONLY_MODE = NO;     // default is "NO". That is, repositories can be edited online.
MAX_SESSION_LIMIT = 2000 ;
MAX_REQUEST_PER_SESSION_LIMIT = 500 ;
SERVER_THREAD_RANGE = 40-100;
SERVER_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
DB_GATEWAY_THREAD_RANGE = 40-200;
DB_GATEWAY_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
MAX_EXPANDED_SUBQUERY_PREDICATES = 8192; // default is 8192
MAX_QUERY_PLAN_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_INFO_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_QUERY_CACHE_ENTRIES = 1024; // default is 1024
INIT_BLOCK_CACHE_ENTRIES = 20; // default is 20
CLIENT_MGMT_THREADS_MAX = 5; // default is 5
# The port number specified with RPC_SERVICE_OR_PORT will NOT be considered if
# a port number is specified in SERVER_HOSTNAME_OR_IP_ADDRESSES.
RPC_SERVICE_OR_PORT = 9703; // default is 9703
# If port is not specified with a host name or IP in the following option, the port
# number specified at RPC_SERVICE_OR_PORT will be considered.
# When port number is specified, it will override the one specified with
# RPC_SERVICE_OR_PORT.
SERVER_HOSTNAME_OR_IP_ADDRESSES = "ALLNICS"; # Example: "hostname" or "hostname":port
# or "IP1","IP2":port or
# "hostname":port,"IP":port2.
# Note: When this option is active,
# CLUSTER_PARTICIPANT should be set to NO.
ENABLE_DB_HINTS = YES; // default is yes
PREVENT_DIVIDE_BY_ZERO = YES;
CLUSTER_PARTICIPANT = NO; # If this is set to "YES", comment out
# SERVER_HOSTNAME_OR_IP_ADDRESSES. No specific NIC support
# for the cluster participant yet.
// Following required if CLUSTER_PARTICIPANT = YES
#REPOSITORY_PUBLISHING_DIRECTORY = "<dirname>";
#REQUIRE_PUBLISHING_DIRECTORY = YES; // Don't join cluster if directory not accessible
DISCONNECTED = NO;
AUTOMATIC_RESTART = YES;
# EVALUATE_SUPPORT_LEVEL:
# 1: evaluate is supported for users with manageRepositories permssion
# 2: evaluate is supported for any user.
# other: evaluate is not supported if the value is anything else.
EVALUATE_SUPPORT_LEVEL = 0;
# Dynamic Library Section
# The dynamic libraries specified in this section
# are categorized by the CLI they support.
[ DB_DYNAMIC_LIBRARY ]
ODBC200 = nqsdbgatewayodbc;
ODBC350 = nqsdbgatewayodbc35;
OCI7 = nqsdbgatewayoci7;
OCI8 = nqsdbgatewayoci8;
OCI8i = nqsdbgatewayoci8i;
OCI10g = nqsdbgatewayoci10g;
DB2CLI = nqsdbgatewaydb2cli;
DB2CLI35 = nqsdbgatewaydb2cli35;
NQSXML = nqsdbgatewayxml;
XMLA = nqsdbgatewayxmla;
ESSBASE = nqsdbgatewayessbasecapi;
# User Log Section
# The user log NQQuery.log is kept in the server\log directory. It logs
# activity about queries when enabled for a user. Entries can be
# viewed using a text editor or the nQLogViewer executable.
[ USER_LOG ]
USER_LOG_FILE_SIZE = 10 MB; // default size
CODE_PAGE = "UTF8"; // ANSI, UTF8, 1252, etc.
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = NO;
//==============================================================================
// Parameters used for writing data to a flat file (i.e. DIRECT_INSERT = NO).
STORAGE_DIRECTORY = "<full directory path>";
CHECKPOINT_INTERVAL_MINUTES = 5;
FILE_ROLLOVER_INTERVAL_MINUTES = 30;
CODE_PAGE = "ANSI"; // ANSI, UTF8, 1252, etc.
//==============================================================================
DIRECT_INSERT = YES;
//==============================================================================
// Parameters used for inserting data into a table (i.e. DIRECT_INSERT = YES).
PHYSICAL_TABLE_NAME = "<Database>"."<Catalog>"."<Schema>"."<Table>" ; // Or "<Database>"."<Schema>"."<Table>" ;
CONNECTION_POOL = "<Database>"."<Connection Pool>" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
//==============================================================================
# Query Optimization Flags
[ OPTIMIZATION_FLAGS ]
STRONG_DATETIME_TYPE_CHECKING = ON ;
# CubeViews Section
[ CUBE_VIEWS ]
DISTINCT_COUNT_SUPPORTED = NO ;
STATISTICAL_FUNCTIONS_SUPPORTED = NO ;
USE_SCHEMA_NAME = YES ;
USE_SCHEMA_NAME_FROM_RPD = YES ;
DEFAULT_SCHEMA_NAME = "ORACLE";
CUBE_VIEWS_SCHEMA_NAME = "ORACLE";
LOG_FAILURES = YES ;
LOG_SUCCESS = NO ;
LOG_FILE_NAME     =     "C:\OracleBI\server\Log\CubeViews.Log";
# MDX Member Name Cache Section
# Cache subsystem for mapping between unique name and caption of
# members for all SAP/BW cubes in the repository.
[ MDX_MEMBER_CACHE ]
// The entry to indicate if the feature is enabled or not, by default it is NO since this only applies to SAP/BW cubes
ENABLE = NO ;
// The path to the location where cache will be persisted, only applied to a single location,
// the number at the end indicates the capacity of the storage. When the feature is enabled,
// administrator needs to replace the "<full directory path>" with a valid path,
// e.g. DATA_STORAGE_PATH = "C:\OracleBI\server\Data\Temp\Cache" 500 MB ;
DATA_STORAGE_PATH     =     "C:\OracleBIData\cache" 500 MB;
// Maximum disk space allowed for each user;
MAX_SIZE_PER_USER = 100 MB ;
// Maximum number of members in a level will be able to be persisted to disk
MAX_MEMBER_PER_LEVEL = 1000 ;
// Maximum size for each individual cache entry size
MAX_CACHE_SIZE = 100 MB ;
# Oracle Dimension Export Section
[ ORA_DIM_EXPORT ]
USE_SCHEMA_NAME_FROM_RPD = YES ; # NO
DEFAULT_SCHEMA_NAME = "ORACLE";
ORA_DIM_SCHEMA_NAME = "ORACLE";
LOGGING = ON ; # OFF, DEBUG
LOG_FILE_NAME     =     "C:\OracleBI\server\Log\OraDimExp.Log";

Reset WLAN network configuration - What .plist file?

I would like to reset my wireless network configurations, delete all network related preferences and settings and start over. This helped me before to solve a problem that I was unable to connect to a network at work.
The 802.11x settings won't load the certificate from the domain that will enable me to connect to my corporate WLAN network.
Can somebody tell me which files these were, so that I can delete them and start again.
Any ideas why this keeps happening and what files these are?
Thanks for any replies and all help.

In Keychain Access, search for the certificate. I don't know how you can check if it is loading. You might just try deleting it and reinstalling.
There are functions in the Keychain Access>Certificate Assistant>Evaluate
See here: http://docs.info.apple.com/article.html?path=Mac/10.5/en/9088.html
And here: http://support.apple.com/kb/HT3326

Approval Resets Price to zero

Hi,
We have a problem in our shopping cart approval. For some materials, there is already a price and a vendor based on a contract. So once the shopping cart is created and approved, it will automatically be converted to a PO. What is happening is that once the shopping cart is approved, the price in the newly created PO becomes zero and it is routed back to the buyer for sourcing.
Why is it that the price resets to zero once the shopping cart has been approved?
Any help would be greatly appreciated.
Thanks in advance.

hi,
Pls refer note 550071.
Some info pertaining to your problem---
The following logic has been designed for price transfer when you transfer shopping baskets from EBP component:
a) If a valid source is assigned to the shopping basket item (for example, an info record or a contract), the price is transferred to the purchase order from the source of supply - unless, the item is created via a catalog and it contains the catalog price.
b) All other items (for example via the free form entry or items with a material number) received the price in the purchase order from the source of supply.
Due to many customer requests, the logic has been changed a little:
a) As soon as an item contains a price higher than 0 - regardless of how the item is created (free entry or catalog) - this is transferred to the purchase order.
b) An exception is items with a material number since the valuation price can never be the purchase price.
c) All items without an explicit price receive the price from the info record or contract.
Reasoning :
A price determination in connection with the assigned source of supply is not carried out since this would mean several remote calls, to determine the correct price. Both info record and outline agreement contain master conditions. This means that the valid price must be determined together with the quantity and the delivery date again (because of price-quantity scales, header conditions, validity periods and so on). A completely new price determination would have to be carried out each time if the user changed the quantity or the date again - this is not carried out for reasons of performance. Since the purchase order resulting from the shopping basket contains the correct price from info record or outline agreement, this only affects creation of the shopping basket and may under certain circumstances influence the release(Workflow).
However in case of local Purchase Orders it can be done without any performance overhead and hence is supported.
If a different behavior is desired, you can implement the BAdI BBP_APPEND_ITEM to get the price of a Shopping Cart item with assigned source of supply from the backend. However the price won't show up in the online transaction while the user creates the Shopping Cart. It is updated by the BAdI when the Shopping Cart is saved. Please evaluate the usage of this BAdI against performance concerns.
HTH.
BR,
Disha.
Pls reward points for useful answers.

Default printer resetting after reboot in Windows 7 x64

I'm managing a domain with roughly 450 clients, all running Windows 7 Ent x64, and about 50 printers. All clients have the same desktop image with the exception of a few desktops need special additional software. I push out printers via GPO and it was
running fine until recently. The client pc would reset it default printer every time the pc reboot or log off. First, there was only a handful and now it spreads to almost half the number of pc are being effect with this problem. I've tried different
approaches, even completely rewrite the GPOs with no success. The pc would reset to either PDFCreator or OneNote or XPS or Fax. I found that if I re-image the client desktop the default printer would remain default but I'm keeping that as the
last option since it involves with data migrating and probably consumes a whole lot of time (200+ effected pc). Any leads or suggestions are much appreciated, my clients are not happy and they are chewing me alive :)
I must add that setting default printer via GPO is not an option for me since people with different groups or branches are sharing the same building/floor.

Hi,
I’m not able to get security clearance to send these files to public, I apologize for that, is there a particular section/part that
I should pay attention to from that report? I went through a report just now and I’m not sure what to look for. Would you mind to give me some direction? Thanks again
>> Please try to review the promon log. The Device value in the following Registry path contains the user's default printer:
HKCU\Software\Microsoft\Windows NT\CurrentVersion\Windows\Device.
We can use process monitor to view what issue cause the registry key reset.
There is a scenarios for your reference:
One or more network printer connection under
HKCU\Printers\Connections\<NetworkPrinterSubkey>
are missing the "Server" registry key.
Resolution:
Start Regedit.exe
Export HKCU\Printers\Connections to have a backup of the key
View the network printer registry subkeys under HKCU\Printers\Connections if on the right hand side it is missing the registry value "Server" then delete the Network Printer subkey under HKCU\Printers\Connections
Longer Term Solution: Remove the bad Network Printer Share from the server and/or update the print driver on the print server.
>>GPMC.log is just to evaluate if there are some policy cause the Default Printer reset.
>>Event Viewer is a User Interface to find the possible problem convenient.
If the issue persist, as the present situation, we cannot get more information for further analysis, please try to contact
directly with a Microsoft Support Professional to analyze the problem.
To obtain the phone numbers for specific technology request please take a look at the web site listed below.
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
If you are outside the US please see
http://support.microsoft.com/directory/overview.asp for regional support phone numbers.
Thank you for your understanding and I hope this will be resolved soon.
Best Regards
Elytis Cheng

Reset non-default parameters in configure dialog of the mapping

OWB 9.0.4
Why after Reconcile inbound on table or cube in any mapping is reset non-default parameters (ex. hints, database link) in configure dialog of the mapping?

Dmitry,
The behavior is intended... And the reason for that is: we could not change it, but then sometimes you do want to change it, sometimes you don't. We could provide flexibility, but then you may have to answer or confirm the selection... which you don't want to do too often. In this case we change, and I am hoping it does not create too many issues for you. Let us know if it does, and we can evaluate the enhancement request.
Thanks,
Mark.

Running total field which evaluates based on another running total field

I'm figuring out how to use running totals in my reports.
For each ProductCategory, there're many Products.
For each Product, there're different ProductVersions.
For each ProductVersion, it takes different Parts.
My report should look like this
Group1: ProductCategory (e.g. Catergory 1)
Group2: Product (e.g. Product1)
Group3: ProductVersion 1
Details: Version 1: 3 * Part1 + 2 * Part2 + 4 * Part3
GpFooter3: Total of 9 parts used
Group3: ProductVersion 2
Details: Version 2: 1 * Part1 + 2 * Part2 + 3 * Part3
GpFooter3: Total of 6 parts used
Group3: ProductVersion 3
Details: Version 3: 2 * Part1 + 2 * Part2 + 3* Part3
GpFooter3: Total of 7 parts used
I've a running total at GpFooter3 to count number of parts, reset on change of Group3.
But for each Product, I'm only interested in the details of the most recent version, that is the version with the greatest version number. So I hide all details and GpFooter3, and want to show
GpFooter2: Product1, ProductVersion3, 7 parts
How can I make a running total at GpFooter2 to select the ProductVersion which has the greatest version number among the Group "Product1"? The problem is, the number of versions for each Prodcut is not fixed, so I can't create a running total which evaluates on a particular version number. I tried to use a running total to obtain the maximum version number per Product, but I can't use this in the running total at GpFooter2 as a evaluation formula.
Your help is much appreciated. Thank you very much.

Create formula fields that are placed in Group Footer 3 that store the value(s) in global variables (basic syntax):
global maxVersion as number
global numParts as number
maxVersion = {version}
numParts = count({part}, {version}) ' Assuming grouped on {version}
formula = ""
Then use other formula fields to retrieve the values:
global maxVersion as number
formula = maxVersion
And similarly for numParts...
HTH,
Carl

My free trial ended in January, but I got an email saying it restarted. But the trial still says expired? Can adobe reset this?

Hi. What is the restart policy for trial versions?

Gageiscool we did reset the trial experience for some of the applications included with the Creative Cloud in January. If you have not installed and utilized these applications since January then please sign out of the Creative Cloud Desktop and sign back in. If the trial is still expired then please evaluate the software on a different computer,
Ned to provide a bit more information we now have the ability to reset the trial experience for all Users for the Creative Cloud applications. This can be beneficial when a new feature is released.
It should be noted however that there is no way for Adobe support to reset the trial experience. The only solution at the moment is to sign out and back in to reapply the licensing files. If the trial is still listed as expired then it will be necessary to either subscribe to a membership or evaluate the software on a different computer.
The only reset which has been done so far was conducted on Photoshop, Illustrator, and InDesign. An e-mail was sent out notifying users in January that the trial experience had been reset. There may be additional resets in the future as new additional new features become available.

Loop counter reset in parallel model ?

Hello,
i am using TestStand 3.1 with parallel model. There is a loop counter for each UUT in RunState.Root.Parameters.TestSocket.UUT.UUTLoopIndex. This increases with every loop that is done.
Now my problem is: If i start the NextUUT, this counter is not set to 0. It just increases.
Is there a different counter that i can use ? Or where can i get the information that the NextUUT button is pressed so that i can reset the counter manually ? Or is there another solution.
Thanks for Help.

Hi,
I don't completely understand, why you want to reset the UUTLoopIndex, because it shows the number of iterations per test socket to check how many uut's have been tested on each. However, you could reset the value with a simple statement before you start the tests. You could do this in the setup step group, e.g. with RunState.Root.Parameters.TestSocket.UUT.UUTLoopIndex = 0. You could add a message popup or evaluate an extra condition or so.
Kind regards,
Philippe Goetz,
Applications Engineer, National Instruments

Why can't I reset my trial like you offered?

I got this email from you stating that you had reset the clock on trial versions - http://view.mail.adobesystems.com/?j=fec716787d61047c&m=fe9d157073640c7e75&ls=fe2215797363 037e731072&l=ff971272&s=fe2315727261077f7d1c78&jb=ff3715737467&ju=fe8f167474600c787d&r=0
There is no update button on the Creative Cloud, and when I try to uninstall and reinstall the creative cloud, it still says my trial has expired. I tried contacting customer support, but they won't help since it's an issue with the trial.
Other people have asked this question on the forum and no one has helped. Why send an offer if you aren't going to back it up?

Hi Davis,
Welcome to Adobe Forum,
In addition to what Rajesh mentioned, I would like to add that :
Adobe reset the trial experience for Photoshop, Illustrator, InDesign, and Muse CC only. This reset allows anyone who previously used a trial of these software titles to evaluate the software title for an additional 30 days.
Sign out using the Adobe Creative Cloud Desktop application.
Then, sign back in. If signing out and back in does not resolve the issue, I would suggest you to use the software on a different computer.
The announcement for resetting of the trial was in January, but yes right now it is not working for few of them.
The engineering Team has been informed about it & they are yet to provide any timeframe for the resolution.
As of now the issue is being looked upon & is under investigation.(I have personally escalated cases for investigation)
Regards,
Rajshree

Trial expired before I could use it. How to reset Trial? [was:Oi! Adobe,...]

Downloaded Lightroom for evaluation a month ago, just tried to open it, but no days left! Your literature said 30 days from opening the product, I have only just had time to evaluate, if you cannot justify your promises, why should I try your product? I want to evaluate it now, last month I had time to download it,not try it, so give me another chance... As a secondary school teacher, Y7-Y11 for you Americans, I have over 30 students studying photography, you do the maths!
Very annoyed

You can normally start a trial for each dot release.
Be interesting to know if that's the case.
I always thought that you can only start one trial for each major version i.e. once LR5.x trial has expired I thought you'd have to wait for LR6.
Be useful to see if trials reset for each dot release.

Ipad mini became hot when charging and now will not come on. All usual resets have been tried

Mini ipad became hot while charging and will not come on. Normal resets have been tried.

I am assuming that you let the device cool down completely before you tried powering up. I don't know what more you might want to try...recharge, restore...the usual troubleshooting steps. Once again, assuming that the device has completely cooled down, I would let the device charge all night, try resetting one more time and if that fails, try restoring the iOS.
If that fails, make an appointment at an Apple Store and let an Apple Genius evaluate the damage.
Use iTunes to restore your iOS device to factory settings

Reset - evaluate or..

Similar Messages

Maybe you are looking for