Reset non-default parameters in configure dialog of the mapping

OWB 9.0.4
Why after Reconcile inbound on table or cube in any mapping is reset non-default parameters (ex. hints, database link) in configure dialog of the mapping?

Dmitry,
The behavior is intended... And the reason for that is: we could not change it, but then sometimes you do want to change it, sometimes you don't. We could provide flexibility, but then you may have to answer or confirm the selection... which you don't want to do too often. In this case we change, and I am hoping it does not create too many issues for you. Let us know if it does, and we can evaluate the enhancement request.
Thanks,
Mark.

Similar Messages

Migration on windows server 2003 to 2012 r2 by using IIS 6.0 what are parameters are changed means supported and non suported parameters and configurations?

In my project am going to migrate windows server 2003 to 2012 r2 by using IIS 6.0? what are the parameters are changed and what are the parameters are not supported and what are the modules need to change?
Please give the related answer as soon as posssibule. that is more help for me?
Thanks,
vamsikrishna.

1. This seems to be incomplete description.
2. You can enable legacy technologies while installing roles and features.
3. For application pool(s) you should consult respective developer/vendor team(s) for help.
Regards
Milos

Generate configuration file with non-default binding configuration in WCF 4.5

Hi,
I am using WCF 4.5 for generating configuration file.
I have referred following MSDN link for generating configuration file.
https://msdn.microsoft.com/en-us/library/hh309266(v=vs.110).aspx
I want binding property for e.g 'maxReceivedMessageSize' in configuration file.
I changed default value of 'maxReceivedMessageSize' to non-default value, but i could not able to saw 'maxReceivedMessageSize' binding property in configuration file.
Is anyone know why i am not able to see non-default value in configuration file.
Thanks.

Hi Amy,
Thanks for reply. Please see below content of configuration file.
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<system.serviceModel>
<bindings>
<netTcpBinding>
<binding name="TestCustBind_CustomerService" />
</netTcpBinding>
</bindings>
<client>
<endpoint address="net.tcp://ABC/CustTest"
binding="netTcpBinding" bindingConfiguration="TestCustBind_CustomerService"
contract="CustomerService" name="TestCustBind_CustomerService">
<identity>
<userPrincipalName value="[email protected]" />
</identity>
</endpoint>
</client>
</system.serviceModel>
</configuration>
Thanks.

Shortcut for selecting non-default button in dialog boxes

I seem to remember that there was a keyboard shortcut many OSs ago. I can't seem to find it or replicate it. Particularly, I would like to choose the non-default button in a dialog box in Acrobat Pro for productivity's sake.
Thanks, Jon

Hi Jon, and a warm welcome to the forums!
No way to tell if Adobe follows the standard, but TAB generally moves through the Dialog buttons & Space Bar selects that choice where Enter/Return chooses the default blue button. Sometimes the CMD key + the first letter of the button selects it iirc. Sometimes the esc key passes for Cancel.
If it's not, in Sys Prefs change if the “Full keyboard access” under keyboard shortcuts is set to use text boxes and lists only, switch it to “All controls”.
http://forums.macnn.com/90/mac-os-x/401945/keyboard-shortcuts-for-dialog-pop-ups /

Dr. Damien's Development - The Xylophone Project VIII - Configuration Dialog

The Configuration button was made active in this installment. The following changes were made.
A full complement of Get and Set members were added to the NoteCalculations class. These were simply copied from the original members and the names and icons changed. Front panel controls were copied directly from the class control cluster.
In the previous version, an error condition during initialization of the sound acquisition loop would cause a hang. This has been fixed in the loop “start” and “stop” cases.
The configuration dialog concept was modified to include a data analysis time period. The code behind the dialog was then written and the whole thing added to the main library.
The main code was modified to use the configuration dialog.
The sound acquisition loop was modified so that no changes to acquisition occur until the apply configuration VI is called. Previously, the object was queried for the number of points taken, which was calculated from the sample rate and acquisition time. This led to incorrect behavior if the sample rate or acquisition time were changed in the configuration while data was being collected. Now the number of points is cached in a shift register and changed when the configuration changes.
The pulse analysis code was modified to filter out frequencies below 20Hz. See Xyl.lvlib:ConvertNotesToDisplay.vi.
The configuration dialog is a simple dialog pattern. Initialization takes place before an event loop, cleanup afterwards. This design pattern is suitable for simple dialogs. You can already see the scalability limits of this type of design in the large numbers of wires going around the event structure. Use of the sound acquisition and note calculation objects made writing the dialog simple and straightforward. Adding new parameters would not be difficult, but would stretch the ease of maintenance if many more were added. Using a state machine similar to the main program loop is the next step, if this dialog gets too large.
The dialog is modal by design, but is also live — changes to the configuration are immediately applied to see the result. This is why the original configuration is cached so it can be restored on Cancel. An unfortunate side effect of this design is that if an error condition occurs, the user must cancel or change the settings, close the dialog, run again from the main panel, then relaunch the dialog to make changes. There are two straightforward ways to fix this — make the dialog nonmodal or add a restart button to the dialog. Making the dialog nonmodal is easiest, but then the user can lose it behind the main window. Adding a restart button creates a more complex dialog. I am tending to the second option. What do you think?
Note that the dialog close events are discarded by the event structure and handled as if the dialog were cancelled. Cleanup is then properly handled.
Tabbing between controls does not work well with this dialog. Programmatic tabbing would be a good option, due to the presence of the tab control. Setting the tab order using the Edit»Set Tabbing Order... menu item is not easy due to the presence of the tab control.
Neither the OK or Cancel buttons are mapped to the keyboard at the moment. The OK button is usually mapped to <Return>, but this leads to frustration when filling out the dialog. So this binding was removed.
As always, comments and suggestions are welcome and encouraged.
Previous Installments
Data Acquisition Concept
GUI Concepts
Specifications
Core Architecture
Data Acquisition and Note Analysis
Sound Acquisition Revisited
Sound Analysis
This account is no longer active. Contact ShadesOfGray for current posts and information.
Attachments:
Xylophone.zip ‏952 KB

The Configuration button was made active in this installment. The following changes were made.
A full complement of Get and Set members were added to the NoteCalculations class. These were simply copied from the original members and the names and icons changed. Front panel controls were copied directly from the class control cluster.
In the previous version, an error condition during initialization of the sound acquisition loop would cause a hang. This has been fixed in the loop “start” and “stop” cases.
The configuration dialog concept was modified to include a data analysis time period. The code behind the dialog was then written and the whole thing added to the main library.
The main code was modified to use the configuration dialog.
The sound acquisition loop was modified so that no changes to acquisition occur until the apply configuration VI is called. Previously, the object was queried for the number of points taken, which was calculated from the sample rate and acquisition time. This led to incorrect behavior if the sample rate or acquisition time were changed in the configuration while data was being collected. Now the number of points is cached in a shift register and changed when the configuration changes.
The pulse analysis code was modified to filter out frequencies below 20Hz. See Xyl.lvlib:ConvertNotesToDisplay.vi.
The configuration dialog is a simple dialog pattern. Initialization takes place before an event loop, cleanup afterwards. This design pattern is suitable for simple dialogs. You can already see the scalability limits of this type of design in the large numbers of wires going around the event structure. Use of the sound acquisition and note calculation objects made writing the dialog simple and straightforward. Adding new parameters would not be difficult, but would stretch the ease of maintenance if many more were added. Using a state machine similar to the main program loop is the next step, if this dialog gets too large.
The dialog is modal by design, but is also live — changes to the configuration are immediately applied to see the result. This is why the original configuration is cached so it can be restored on Cancel. An unfortunate side effect of this design is that if an error condition occurs, the user must cancel or change the settings, close the dialog, run again from the main panel, then relaunch the dialog to make changes. There are two straightforward ways to fix this — make the dialog nonmodal or add a restart button to the dialog. Making the dialog nonmodal is easiest, but then the user can lose it behind the main window. Adding a restart button creates a more complex dialog. I am tending to the second option. What do you think?
Note that the dialog close events are discarded by the event structure and handled as if the dialog were cancelled. Cleanup is then properly handled.
Tabbing between controls does not work well with this dialog. Programmatic tabbing would be a good option, due to the presence of the tab control. Setting the tab order using the Edit»Set Tabbing Order... menu item is not easy due to the presence of the tab control.
Neither the OK or Cancel buttons are mapped to the keyboard at the moment. The OK button is usually mapped to <Return>, but this leads to frustration when filling out the dialog. So this binding was removed.
As always, comments and suggestions are welcome and encouraged.
Previous Installments
Data Acquisition Concept
GUI Concepts
Specifications
Core Architecture
Data Acquisition and Note Analysis
Sound Acquisition Revisited
Sound Analysis
This account is no longer active. Contact ShadesOfGray for current posts and information.
Attachments:
Xylophone.zip ‏952 KB

GLPLADM Planning profile for new gl - default parameters

i have copied the existing SAPFAGL profile and the layouts belonging to them and created a new profile with the same layouts. i am trying to set default parameters in order to get file description for each of the planning layout. i am able to do in our sandbox but not in the development client. the difference between two clients are sandbox is an upgraded version to 6.0 and the development client is a new box loaded with ECC 6.0. kindly help me on this.i would need to have the file description in order to do a excel planning upload. my excel planning upload works fine for the cost center profile and the layouts. i am having issue with the new g/l planning where the planning is done at the profit center and g/l Account

no errors no issues.. usually when we click on the default parameters it takes us to the screen showing the layout and then we key in data and the excel sheet gets loaded . we key in data or we can save the file description , it is automatically generated and the file description generated by the system gets populated in the file description field of the planning layout in the planning profile. in my case, when i click the default parameters, it doesnt go any further, and no warning or erro messages are issued. the same default parameters take me to the layout screen when i click the default parameters from the Cost center planning profile. i am not able to resolve this, asked many people but of no use. hope you understand my issue.

Default parameters are missing in the cloned EUL

we have discoverer up and running perfectly on our existing instance - SIGMA
now we have a new instance - ALPHA,
we cloned the whole EUL from old instance(SIGMA),
IN ALPHA every thing is working fine, we have all the BA,folders and all the workbooks seem to work fine, but we have a issue with the default parameters.
the default parameters are missing from the workbooks, now this has become an big issue, because we have hundreds of reports and user want need them all with the default parameters
could somebody please help me on this issue
few questions:
when cloned does the default parameters get erased??
Does the default parameters entered in the workbook get saved anywhere in the EUL_Tables??
Could you please give me a best approach to bring in thoese default parameters??
any thoughts are highly appreciated
note: i can edit the worksheet and enter the default parameter and save the worksheet but we have got some hundreds of workbooks

Hi,
when cloned does the default parameters get erased??I would be surprised if the default parameters are erased. More likely is that they are not being used because the default value is not valid anymore or because Discoverer is trying to use the last parameter value. Check the value of the SaveLastUsedParamValue preference setting. Is this the same on Desktop, viewer and Plus?
Does the default parameters entered in the workbook get saved anywhere in the EUL_Tables??The default parameters will be save along with the workbook in the EUL5_DOCUMENTS table. The field is of type LONG RAW so you won't easily be able to see this field. You can use the workbook dump utility to check whether there are default parameters actually set up in the workbook.
Could you please give me a best approach to bring in thoese default parameters??You could try exporting and importing the workbooks into the new environment to see whether this fixes the issue.
Rod West

Reset to default configuration on WLSM

I was configuring AAA on my WLSM and managed to negate console access , how do i reset the WLSM module ot its default cocnfiguration, or at the very least, get the password recovery script needed to get access to my WLSM back!

Hi
It seems like i have the same problem getting Tacacs login to work, i i try to type in
"aaa authentication login default group tacacs+ enable none"
Then i will loos access to the WLSM, however i have not saved my config so i can just restart the module.
have you any new information about AAA for console access ??

Configuring IPIB with non-default partition key

Hello
I want to put IB HCA port into non-default partition to create separate network on my IB fabric. On IB switch (Voltaire ISR9096) I created network with non-default partition key 0x7ffe and add HCA port to this partition.
But this IB-VPPA was displayed as unconfigured on Solaris host
ib::3BA0001004181,ffff,ipib    IB-VPPA      connected    configured   ok
ib::3BA0001004182,fffe,ipib    IB-VPPA      connected    unconfigured unknown
ib::3BA0001004182,ffff,ipib    IB-VPPA      connected    configured   okConfiguration of new VPPA with cfgadm was unsuccessful:
# cfgadm -c configure ib::3BA0001004182,fffe,ipib
Configure the device: /devices/ib:fabric::3BA0001004182,fffe,ipib
This operation will suspend activity on the IB device
Continue (yes/no)? yes
cfgadm: Hardware specific failure: configure operation failed ap_id: /devices/ib:fabric::3BA0001004182,fffe,ipibI unconfigured VPPA with default partition key (0xffff) on HCA port 0x3BA0001004182 and issued cfgadm for VPPA with pkey 0xfffe again - the same effect.
I tried this on Solaris 10 8/07 and OpenSolaris b72 with the same result - no success ;)
Is it possible to configure VPPA with non-default pkey on Solaris ?
Is it possible to configure more than 1 IPIB VPPA on single HCA port ?
How to perform these configurations ?
Thanks in advance.
Regards,
Denis

hi
I was able to setup the listener to serve both databases using netmgr, thanks. Apparently I was trying to use the wrong tool for this previously.
Now i'm able to access the EM Database Control and it seems to be working fine though i get the following error message
Logged in As SYS
Error
java.lang.Exception: Number of responses does not match queries
Database Instance: devel.foo.bar
Now, i'd like to be able to use EM for administering two separate databases (running on the same host). Do i need to migrate the database control somehow to grid control? How do i do that?
What about security? I'd like to use SSL and limit connections to selected clients only.
regards,
aspa

JVM crashes when selecting non-default printer in ReportViewer in NATIVE dialog.

On ReportViewer frame i have the print button active. If i click the print button (Native dialog) and select a printer other than default printer, the JVM crashes. Any idea how to fix it?
Thanks

I wanted to provide little history of what I am trying to achieve. Currently, I have the following code:
PrinterJob printJob = PrinterJob.getPrinterJob();
        if (printJob.printDialog()) {
            String printerName = printJob.getPrintService().getName();
            String printJobName = printJob.getJobName();
            PrintReportOptions printOptions = redirectPrinter(printerName, printJobName);
            sendReportOutputAndClose(reportClientDoc, printOptions);
I want to capture the number of copies user selects from the dialog. When I do printJob.getCopies(), it always returns 1. Not sure how to get that # of copies user selected. I also wanted to the dialog to be in Native mode because I don't want to give access to modify Margins and other page properties which are part of COMMON dialog mode. If I create the dialog printJobAttribute.setDialog(JobAttributes.DialogType.NATIVE); then VM crashes when selecting a non-default printer but I am able to get the number of copies. The key is I need to use NATIVE dialog and get the number of copies. One option is to display in COMMON dialog mode and then hide the "Page Setup" and "Appearance" tabs. Can this be done ? I am new to Java and Crystal so any suggestions would help.

I don't have my navigation bar at all. I tried to start in safe mode but I never get the dialog box the y say you should get to reset to defaults. Help?

i don't have my navigation bar at all. I tried to start in safe mode but I never get the dialog box the y say you should get to reset to defaults. Help? I have even uninstalled and reloaded firefox
== This happened ==
Every time Firefox opened
== My wife hit a button and doesn' know what happened

See if this helps. View > Toolbars, if no check beside Navigation Bar, click on Navigation Bar to check it.
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
''Windows'' Method 2. Tap once on the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
''Windows'' Method 3. Tap once and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See:
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
http://kb.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.18; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r45; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-''In Windows,'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-''In Windows,'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, '''but''' do look at the two bulleted items at the bottom "'''NOTE for IE:'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

Configurable dialog with timeouts and default capabilities

I would like to have a native LabVIEW dialog in the functions pallet that will allow you to set a default value and a time out feature. This allows a user to pick a desired behaviour if present but if not present the dialog times out and program continues to run with the default action in mind. It is relatively easy to create the interface needed but there are times having this already available would be great.

Sure you can make a template as you can with most vi's on the functions pallet. It would be convenient to have this built in so it would be available I suspect many people would find this useful.

2602e Reset to Defaults Except IP not Work over Web GUI

Hello,
1. Set a Static IP
2. Apply & Save Configuration
3. After Reboot the IP is correct.
Then do Reset to Defaults Except IP in the WEB Gui.
After Reboot the AP loos the static IP and get a DHCP Address.
Reset to Defaults Except IP = Reset to Defaults !
Whats Wrong ?

OK, here is:
Writing out the event log to flash:/event.log ...
*Jan 22 17:44:56.675: %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram
*Jan 22 17:44:57.547: %SYS-5-RELOAD: Reload requested by on console. Reload Reason: Reload Command.
Write of event.log done
IOS Bootloader - Starting system.
flash is writable
FLASH CHIP: Numonyx Mirrorbit (0089)
Xmodem file system is available.
flashfs[0]: 212 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 15058432
flashfs[0]: Bytes available: 16939520
flashfs[0]: flashfs fsck took 23 seconds.
Reading cookie from SEEPROM
Base Ethernet MAC address: 10:f3:11:c2:2e:3a
Ethernet speed is 1000 Mb - FULL Duplex
Loading "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a"...##########################
File "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a" uncompressed and installed, entry point: 0x2003000
executing...
Secondary Bootloader - Starting system.
Tide MB - 32MB of flash
Xmodem file system is available.
flashfs[0]: 212 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 15058432
flashfs[0]: Bytes available: 16939520
flashfs[0]: flashfs fsck took 14 seconds.
Base Ethernet MAC address: 10:f3:11:c2:2e:3a
Boot CMD: 'boot flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a;flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a'
Loading "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a"...#######################################
File "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a" uncompressed and installed, entry point: 0x1003000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C3600 Software (AP3G2-K9W7-M), Version 15.2(4)JB3a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 23-Dec-13 08:11 by prod_rel_team
Tide MB - 32MB of flash
Initializing flashfs...
flashfs[3]: 212 files, 7 directories
flashfs[3]: 0 orphaned files, 0 orphaned directories
flashfs[3]: Total bytes: 31739904
flashfs[3]: Bytes used: 15058432
flashfs[3]: Bytes available: 16681472
flashfs[3]: flashfs fsck took 12 seconds.
flashfs[3]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 0 seconds.
flashfs[4]: Initialization complete.
Copying radio files from flash: to ram:
Copy in progress...CCCCC
Copy in progress...CCC
Copy in progress...CCCC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...CCC
Copy in progress...CC
Copy in progress...CCCCC
Uncompressing radio files...
...done Initializing flashfs.
Radio0 present 8764 8000 0 A8000000 A8010000 0
Rate table has 650 entries (20 legacy/224 11n/406 11ac)
POWER TABLE FILENAME = ram:/B2.bin
Radio1 present 8764 8000 0 88000000 88010000 4
POWER TABLE FILENAME = ram:/B5.bin
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-SAP2602E-E-K9 (PowerPC) processor (revision A0) with 204790K/57344K bytes of memory.
Processor board ID FGL1711Z6K6
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 10:F3:11:C2:2E:3A
Part Number                          : 73-14511-02
PCA Assembly Number                  : 800-37898-01
PCA Revision Number                  : A0
PCB Serial Number                    : FOC17093TXF
Top Assembly Part Number             : 800-38357-01
Top Assembly Serial Number           : FGL1711Z6K6
Top Revision Number                  : A0
Product/Model Number                 : AIR-SAP2602E-E-K9
Press RETURN to get started!
*Mar 1 00:00:16.035: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
*Mar 1 00:00:16.151: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (11)APAVC: WlanPAKs 18174 RadioPaks 17566
*Mar 1 00:00:23.131: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:29.443: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:29.503: initializing dot11 onplus
*Mar 1 00:00:29.667: not a autoconfig enabled device!!!
*Mar 1 00:00:31.671: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:32.671: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 1 00:01:18.015: Starting Ethernet promiscuous mode
*Jan 22 17:44:57.000: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Jan 22 17:44:57.000: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Jan 22 17:44:57.007: %CDP_PD-4-POWER_OK: Full power - HIGH_POWER inline power source
*Jan 22 17:44:57.015: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3600 Software (AP3G2-K9W7-M), Version 15.2(4)JB3a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 23-Dec-13 08:11 by prod_rel_team
*Jan 22 17:44:57.015: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start
*Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to downERROR: Failed to configure ethernet promiscuous mode. Interface Descriptor mismatch
*Jan 22 17:45:01.667: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (0-0)
*Jan 22 17:45:01.667: DPAA Initialization Complete
*Jan 22 17:45:01.667: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Jan 22 17:45:02.667: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Jan 22 17:45:06.863: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.16.33.216, mask 255.255.254.0, hostname ap

To get GAL of non default address book from multiple accounts in outlook

I have two domain accounts configured in my outlook, for example [email protected] and [email protected]
There are 2 address books (Please refer to the picture attached). I want to show user to SelectNameDialog by adding the recipients from non-default account's address book. But it adds the names to the selectnamedialog from the default address book and displays.
C# code : Outlook.SelectNamesDialog snd = app.Session.GetSelectNamesDialog();
How to get non-default account’s address book programmatically.
ThankYou for your suggestion.
Note: I am not able to attach the image

Hello,
> Note: I am not able to attach the image
It seems you need to verify your account. See How
to Verify Your MSDN/TechNet Forums Account So that You Can Post Images and Links.
> How
to get non-default account’s address book programmatically.
void DisplayGlobalAddressListForStore()
Outlook.Folder currentFolder =
Application.ActiveExplorer().CurrentFolder
as Outlook.Folder;
Outlook.Store currentStore = currentFolder.Store;
if (currentStore.ExchangeStoreType !=
Outlook.OlExchangeStoreType.olNotExchange)
Outlook.SelectNamesDialog snd =
Application.Session.GetSelectNamesDialog();
Outlook.AddressList addrList =
GetGlobalAddressList(currentStore);
if (addrList != null)
snd.InitialAddressList = addrList;
snd.Display();
public Outlook.AddressList GetGlobalAddressList(Outlook.Store store)
string PR_EMSMDB_SECTION_UID =
@"http://schemas.microsoft.com/mapi/proptag/0x3D150102";
if (store == null)
throw new ArgumentNullException();
Outlook.PropertyAccessor oPAStore = store.PropertyAccessor;
string storeUID = oPAStore.BinaryToString(
oPAStore.GetProperty(PR_EMSMDB_SECTION_UID));
foreach (Outlook.AddressList addrList
in Application.Session.AddressLists)
Outlook.PropertyAccessor oPAAddrList =
addrList.PropertyAccessor;
string addrListUID = oPAAddrList.BinaryToString(
oPAAddrList.GetProperty(PR_EMSMDB_SECTION_UID));
// Return addrList if match on storeUID
// and type is olExchangeGlobalAddressList.
if (addrListUID == storeUID && addrList.AddressListType ==
Outlook.OlAddressListType.olExchangeGlobalAddressList)
return addrList;
return null;
Setting the InitialAddressList property is the programmatic equivalent to selecting an AddressList from the drop-down list for Address Book in
the Select Names dialog box.
In its default state, InitialAddressList is the AddressList that has the property AddressList.IsInitialAddressList set
to True. IsInitialAddressList corresponds to setting Show this address list first in the Addressing dialog
box, which is available by clicking Tools, and then Options in the Address
Book dialog box.
See How to: Get the Global Address List or a Set of Address Lists for a Store for more information.

I have no navigation bar and firefox will not open in safe mode to reset to default config. Reinstalling doesn't work. Any help please.

I have no navigation bar ever since I closed it to gain more space on the screen. It won't re-open. Firefox will not open in safe mode, but opens immediately in normal mode with the new improper config, so I cannot reset to default config. I erased Firefox and re-installed and it still opens with the same faulty config. Why does Firefox not give me the safe mode dialog box, why can I not re-open the nav bar, and how can I do these two things, please? Firefox is currently unusable for me without a nav bar and without access to the default settings in safe mode. I cannot research the extensions I'm running since I have no nav bar to go to Tools, Add-ons, Extensions.
== This happened ==
Every time Firefox opened
== I closed the navigation bar to gain more space on the screen and I couldn't re-open it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar and Navigation bar, so they have a check-mark.

Reset non-default parameters in configure dialog of the mapping

Similar Messages

Maybe you are looking for