Running Total Fields - using formula, but can't get what i want?

Hi All,
I have already searched some forum, but still can't figure out what going wrong. Can anyone help me?, please
I create a view from access named u201CStatementReportu201D and have the following field.
<InvNo>
<CustNameC>
<JobItemNo>
<InvDate>
<JobTypeId>
<JobPrice>
I create three parameter as CustName, StartDate, EndDate, then I create a Group to group <InvNo> as the report detail and a Running Total Fields for calculate the total of <JobPrice>.
So far the report is fine. Showing the grouped <InvNo> and the total amount of <JobPrice>
Then, I want to calculate the <JobPrice> by the condition of <JobTypeId>.
First, I create a new Running Total Fields
Field to summarize = StatemetnReport.JobPrice
Type of summary = sum
Second, I create a formula as following
whileprintingrecords;
global numbervar type1_sum :=0 ;
if {statementRe.JobTypeId} = 1 then
    type1_sum := type1_sum + {statementRe.JobPrice};
type1_sum;
After completed the formula, and i press Ok button.
A dialog appear "Warning: Reset/evaluate condition formula contains variables. Do you want to keep it?"
No matter i click Yes or No, I still can't get anything display on the field.
Edited by: manho88 on Mar 9, 2010 9:42 AM

Hi,
Instead of running total use can try this formula.
Place this formula in the details section.
whileprintingrecords;
numbervar jpsum;
if =111 then
jpsum:=jpsum +
else 0;
You can modify this formula as per your requirement.
Hope this helps.

Similar Messages

  • I can still use Internet but can't get any bars for signal?? Let it says Vodafone uk please help

    I can still use the Internet am receiving emails yet I can't send or receive calls it says Vodafone uk but have no bars for signal please help

    I think you have to restore it but choose to restore with iTunes NOT with iCloud or restore as new! You must back up first and synch with iTunes for not loosing any apps,pics,contacts etc!
    This will help...

  • HT4759 Trying to use Icloud but can not get it to work , says I need I06  , how do I find out my version on this Ipad

    How do I find the details of my operating system on my IPad 2 as I can not sem to get I Cloud to work

    sync the ipad to the computer that has itunes via usb. This is the same computer that you originally used to activate and set up your ipad.

  • I installed windows 8 using bootcamp but can't get back to the apple side.  The windows side can not find the bootcamp app

    I installed windows 8 using boot camp assistance.  I finished and it looks like windows installed successfully.  When I search for boot camp.  It doesn't find it.  When I restart the computer it comes up in windows.  How do i get back to the apple side?

    You did made a backup before you started all of this with BootCamp, didn't you?
    One missed step with BootCamp and the whole Mac side of things can disappear.
    I thought a Recovery boot and Disk Utility would be the quickest way to find out what you did.
    Allan

  • My iTunes won't open it used to but can not get it to open on my laptop today?? Help

    My iTunes on my laptop will not open it opened the other day but I have been trying for an hour and it won't open

    Try uninstalling and reinstalling it
    Go into the control panel and 'add/remove programs'. Uninstall itunes then redownload it and reinstall it.
    If something got really messed up you may just need to start fresh. But it won't affect your content, at least that hasn't been my experience. I've reinstalled iTunes and haven't had to redownload apps, so ti's just the interface you're reinstalling.

  • Would like to use timemachine, but can't get my lacie 160GB drive ...

    ...recognized by the finder.
    There are 2 firewire ports. One is plugged onto my MB PRO. The other goes to my ib g4 and he's not seeing the firewire. What can I do to rescan the firewire, etc.?

    No problem. In case you are wondering the other plug is for connecting another firewire drive. You can `daisy chain' firewire drives.
    Michael

  • Can't set up my email. I use StartLogic but can only get my mail going to their site.

    SL gave me some numbers for the in and out ports but I only saw one port in Advanced.
    Thanks

    Hi Annie,
    Make sure when you are setting up your e-mail account that you enter in your entire e-mail address.  If you have a Yahoo (includes any e-mail account associated with Yahoo), G-mail, or Aol after entering in your password it should automatically set up.  Any other e-mail address you will have to manually set the account up.

  • Iam trying to purchase any of my downloaded appli but I couldnt get what i want always shown is "Please contact Tunes support to complete this transaction ,"but  idont  know where to ask to? pls.tell me what is the problem in my acct.

    any kind of transaction ,purchases from any of the game or appli Idownloaded could not make it  always shown on my screen is"Please contact iTunes support to complete this transaction ,could you please tell me what is the problem with my acct.

    These are user-to-user forums, nobody on here will know what the actual problem is with your account.
    You can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

  • When is gaikai coming to iOS devices cause I'm getting kind of ticked with the same fake lie, gaikai is soon coming to iOS devices crap. What kind of service is this if you can't get what you want when you apparently want it? Apple, do something!

    Apple devices always says for gaikai, "gaikai coming soon to iOS devices" but I have had this iPad for 2generations (updates) iOS 6 and 5 yet there is no change to the same excuse. I smell something fishy and I am getting irritated with the same excuse. Just give people the gaikai folks!
    It's easy as abc and 123. I do not want to erase my contents and sell this device for this cause. Please give the gaikai for the sake of sim lovers out there!

    Contact the Gaikai developers. It isn't apple your mad at

  • Require a formula to calc the diff between 2 running total fields in a crosstab

    Post Author: PJM
    CA Forum: General
    Hi,
    I have built a crosstab in Crystal XI with the following columns:
    PROFILED BUDGET (a)                            EXPENDITURE TO DATE (b)                        VARIANCE (a-b)
    The profiled budget and expenditure to date columns are both running total fields.  I want the variance column to show the difference between the budget and expenditure. 
    To set the variance field up as a running total, I assume that I would have to specify that I want this formula evaluated after the budget and expenditure fields , however, I can't work out how to do this on a crosstab. 
    Moving the crosstab to the report footer has had no impact.
    If I try to create a basic formula using the running totals, I get the error message "A summary has been specified on a  non-recurring field" - I can't find an explanation of this error message on the help menu.
    Can anyone help with this please?

    overtime hours are calculated after 40. If I work 12 on monday, thats 12 regulars hours. not sure about others states laws but here in wisconsin we consider overtime after 40 only, not after 8 daily. at least thats how my company calculates overtime. lets say I work 10 hours a day, monday thru thursday, thats 40 hours regular time. anything after that is overtime. our weekly work schedule starts on sunday and ends on saturday. so on my bi-weekly time log, if i work 10 hrs a day monday thru thursday, i want 10hrs each day in regular hours cell, then when i work friday and or saturday, i want those hours in overtime hours. the main problem im having is: if i reach 40 hours in the middle of a day, i want the regular of that day to end and the overtime to pick up on the same day.
    here is a basic example of how i want regular and overtime to look. of course the values will be duration not just numbers. hope this helps explain what i need a bit better.

  • I can run a slide show using apple tv and itunes but can't get the slides to run in a specific order

    I can run a slideshow (of pictures) using Apple TV and ITunes but can't get the pictures to run in the order I set them up with in my hard drive directory

    Welcome to the Apple Community.
    Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
    I have created a User Tip to list Apps that have been tested with Video Airplay, if you have any Apps that you have tested please leave details in the comments at the bottom of the User Tip or email me if you don't have commenting privileges.

  • I created an imovie that runs 2hrs 14min but can't get it to burn on a DVD

    I creatded an imovie that runs 2hrs 14min but can't get it to burn onto a DVD. 
    Any recommendations?

    Hi
    iDVD - don't care about GBs - ONLY - Time = Movie + Menus - as follows
    iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
    About double on DL DVDs.
    If You NEED to put in more than 120 minutes onto a SL DVD - Then I would use Roxio Toast™ as this can squees in between 7 to 10 hours onto this - BUT AT A BARELY USABLY QUALITY.
    VHS tapes recorded in EP- mode will look brilliant in comparision
    Just as info:
    SP = 240 minutes on a standard VHS tape
    LP = 480 minutes
    EP = 720 or more ?
    Yours Bengt W

  • After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I see my buddy, but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies.

    After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I am using gmail, and I see my buddy (no camera icon next to her name), but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies. My buddy has the same problem as I.  We are able to do video chat through gmail, but I had hoped to use iChat.  I am using OS 10.6.8, iChat v. 5.0.3.  What am I missing?

    HI,
    iChat will Video chat to another iChat in a Jabber Buddy List (Google run a Jabber server for GoogleTalk)
    However it will not Video to the Web Page login to iGoogle or the Web Mail Page login.  (where people can Google Chat as it were in a  Web Browser).
    Nor does it video to the Google Talk Stand alone app for PCs or any other Jabber apps on any platform.
    iChat uses a connection Process called SIP (Session Initiation Protocol) which is also used by other VoIP devices.
    Jabber/XMPP invited the Jingle Protocol for Jabber Applications.
    Google have included this in their Standalone app and the Plug-in for Web Browsers on both PCs and Mac (you can get this as a Standalone Plug-in or as part of Chrome)
    More on this here  This article has been changed several time in the recent months.  It now claims a greater involvement by Google in writing the Jingle Library (Although now Google's version does not work with the others)
    This tends to mean that using the web Login to Google to Chat also cannot video chat to other Jabber apps that are using Jingle.
    If your Buddy is using iChat then check the Video Menu has two items to Enable Camera/Video chat and Microphone/Audio chats are ticked.
    In the View Menu the Show Status Items should be ticked (Selecting them toggles the tick and the function On or Off)
    It could be Internet speed but at this stage I would doubt this at this stage.
    10:27 PM      Saturday; January 21, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Multiple Reset in Running Total Field

    Hello,
    I have defined 2 groups in my report
    I have a running total field that it reset on group #2 changes.
    Sometimes, Group #1 changes but Group #2 doesn't changes therefore the running total field doesn't reset.
    I need to define the running total field that it reset on group #2 changes or on group #1 changes too.
    Thanks,

    I will expand my issue with an example:
    Group #1 : Account Number
          Group #2 : Company Name
    Movements Details, Debit, Credit, Balance (Running Total Field)
    Total Group # 2
    Total Group # 1
    Sometimes, a account number exist in company 1 but not in company 2. Therefore, group #1 changes meanwhile group #2 does'nt change and as a result the Running Total Field does'nt reset.

  • My itunes is on an old computer.  So old that I can't update it and so Haven't used it in two years.  How can I move it to my new laptop and make sure this doesn't happen again?  Very frustrated that I've spend $$ but can't get my music.

    My itunes is on an old computer.  So old that I can't update it and so Haven't used it in two years.  How can I move it to my new laptop and make sure this doesn't happen again?  Very frustrated that I've spend $$ but can't get my music.
    I want so set up itunes on my laptop and make sure that I get all of my old music and any music shared from my sons' itunes accounts.  Do I have to set up itunes on my new laptop first and then use the same logins?  Really concerned about losing any music, etc.

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should  merge the existing data from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

Maybe you are looking for

  • Error occured while creating WAR using DeployTool

    Hi, I am creating a webservice application. I used JAXB to create JAVA implementation of my XML schema. My webservice core is based on JAVA servlets. I have included all required JAXB API / implementation JARs into the lib directory. When I try to pr

  • Error message when downloading video from itunes

    It keeps saying that my disk cannot be read or written to. I've already purchased the video (episode of the Office). Does anyone know what I can do to solve this? Thanks.

  • Null Values to internal tables

    I need to pass Null Value to couple of fields in Internal table and one of them is type i. Any way to do it?

  • Read and average n data from text file

    I acquire numeric data from the oscilloscope [reading a waveform] that is stored in one column in a text file. I need to read in selectable amount of data points to average/plot them. So basically I wanna have a text file with millions of data points

  • Calling Stored function and showing returned value on the UI screen

    I am calling a stored function by using the following steps mentioned as per the below link. The stored function returns a single scalar value http://download.oracle.com/docs/cd/E1790401/web.1111/b31974/bcadvgen.htm#sm0297_ Please verify if I am putt