Reset lead selection after refresh in alv grid
Hi experts,
I've a problem with holding the lead selection in an alv grid table view in web dynpro.
After changing an attribute the lead selection in the view gets lost, but is hold in the referenced context node.
Is there a way to change the lead selection in alv by code?
I've found the method "set_index()" in class CL_SALV_WD_TABLE_LEAD_SELECT, can I use that?
Thanks a lot,
Kai
Hi Kai,
I faced a similar problem earlier.
Request you to elaborate about the "attribute" you are changing.
I was also facing a similar issue.
It will be gr8 if I can help you.
Please see the below thread for some reference.
[Not able to select a row in ALV|Not able to select a row in ALV?;
I hope it helps.
Regards,
Sumit Oberoi
Similar Messages
-
ALV OO and refreshing the ALV grid
Hi,
i have some problems with my ALV 00 program.
On screen 1 i have to fill in a material number.
For that material i'm getting some data and show in screen 2 in a ALV grid.
Via BACK-button i'm getting back to screen 1 and can fill in another material number.
But the 2nd (and 3rd, etc) time i fill a material, the ALV grid data from material 1 is shown. Even if the internal table I_ALV where the data is, is changed.
What should i do ?
I have initialized the customer container and the grid, but that didn't solved the problem.
regards,
HansHi,
Try clearing and refreshing the alv grid data table in screen 2.
Check with this code. this code is working fine. If we go back and change the input, it is showing the output corresponding to the second input only.
Have you use this method?
<b> GR_ALVGRID->REFRESH_TABLE_DISPLAY</b>
TYPE-POOLS : SLIS.
* Tables *
TABLES:
VBRK,
VBRP.
* Parameters and select options OR SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
S_VBELN FOR VBRK-VBELN.
SELECTION-SCREEN END OF BLOCK B1.
* Internal Tables *
* work areas
DATA: BEGIN OF IT_VBRP OCCURS 0,
VBELN LIKE VBRK-VBELN,
POSNR LIKE VBRP-POSNR,
UEPOS LIKE VBRP-UEPOS,
FKIMG LIKE VBRP-FKIMG,
NETWR LIKE VBRP-NETWR,
MEINS LIKE VBRP-MEINS.
DATA : END OF IT_VBRP.
* Variables *
DATA : GR_ALVGRID TYPE REF TO CL_GUI_ALV_GRID,
GC_CUSTOM_CONTROL_NAME TYPE SCRFNAME VALUE 'CC_ALV',
GR_CCONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
GT_FIELDCAT TYPE LVC_T_FCAT,
GS_LAYOUT TYPE LVC_S_LAYO,
V_FLAG VALUE 'X'.
* Start of Program *
* INITIALIZATION. *
INITIALIZATION.
S_VBELN-LOW = 1.
S_VBELN-HIGH = 1000000000.
S_VBELN-OPTION = 'EQ'.
S_VBELN-SIGN = 'I'.
APPEND S_VBELN.
* SELECTION-SCREEN *
AT SELECTION-SCREEN.
PERFORM VALIDATION.
* START-OF-SELECTION *
START-OF-SELECTION.
PERFORM GET_DATA.
CALL SCREEN 0100.
* END-OF-SELECTION *
END-OF-SELECTION.
* TOP-OF-PAGE *
TOP-OF-PAGE.
* END-OF-PAGE *
END-OF-PAGE.
* AT USER-COMMAND *
*& Form VALIDATION
* text
* --> p1 text
* <-- p2 text
FORM VALIDATION .
SELECT SINGLE VBELN
FROM VBRK
INTO VBRK-VBELN
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'no billing documents found'.
ENDIF.
ENDFORM. " VALIDATION
*& Form GET_DATA
* text
* --> p1 text
* <-- p2 text
FORM GET_DATA .
SELECT VBELN
POSNR
UEPOS
FKIMG
NETWR
MEINS
FROM VBRP
INTO TABLE IT_VBRP
WHERE VBELN IN S_VBELN.
ENDFORM. " GET_DATA
*& Module DISPLAY_ALV OUTPUT
* text
MODULE DISPLAY_ALV OUTPUT.
IF V_FLAG = 'X'.
PERFORM DISPLAY_ALV.
PERFORM PREPARE_FIELD_CATALOG CHANGING GT_FIELDCAT.
PERFORM PREPARE_LAYOUT CHANGING GS_LAYOUT.
CALL METHOD GR_ALVGRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME = 'VBRP'
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
IS_LAYOUT = GS_LAYOUT
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
IT_OUTTAB = IT_VBRP[]
IT_FIELDCATALOG = GT_FIELDCAT
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CALL METHOD GR_ALVGRID->SET_READY_FOR_INPUT
EXPORTING
I_READY_FOR_INPUT = 1.
ELSE.
<b>CALL METHOD GR_ALVGRID->REFRESH_TABLE_DISPLAY
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
FINISHED = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.</b>
ENDIF.
CLEAR V_FLAG.
ENDIF.
ENDMODULE. " DISPLAY_ALV OUTPUT
*& Form DISPLAY_ALV
* text
* --> p1 text
* <-- p2 text
FORM DISPLAY_ALV .
IF GR_ALVGRID IS INITIAL.
CREATE OBJECT GR_ALVGRID
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
I_PARENT = GR_CCONTAINER
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " DISPLAY_ALV
*& Form PREPARE_FIELD_CATALOG
* text
* <--P_GT_FIELDCAT text
FORM PREPARE_FIELD_CATALOG CHANGING P_GT_FIELDCAT TYPE LVC_T_FCAT.
DATA : LS_FCAT TYPE LVC_S_FCAT,
L_POS TYPE I.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'VBELN'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Billing Document'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'POSNR'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Billing Item'.
LS_FCAT-OUTPUTLEN = '6'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'UEPOS'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Higher Level Item'.
LS_FCAT-OUTPUTLEN = '6'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'FKIMG'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Invoice Quantity'.
LS_FCAT-OUTPUTLEN = '13'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'NETWR'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Net Value'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'MEINS'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Unit of Measure'.
LS_FCAT-OUTPUTLEN = '3'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form PREPARE_LAYOUT
* text
* <--P_GS_LAYOUT text
FORM PREPARE_LAYOUT CHANGING P_GS_LAYOUT TYPE LVC_S_LAYO.
P_GS_LAYOUT-ZEBRA = 'X'.
P_GS_LAYOUT-GRID_TITLE = 'INVOICE DETAILS'.
P_GS_LAYOUT-SMALLTITLE = 'X'.
P_GS_LAYOUT-EDIT = 'X'.
ENDFORM. " PREPARE_LAYOUT
*& Module STATUS_0100 OUTPUT
* text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'CANCEL'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
CALL TRANSACTION 'SE38'.
WHEN 'CHANGE'.
IF GR_ALVGRID->IS_READY_FOR_INPUT( ) = 0.
CALL METHOD GR_ALVGRID->SET_READY_FOR_INPUT
EXPORTING
I_READY_FOR_INPUT = 1.
ELSE.
CALL METHOD GR_ALVGRID->SET_READY_FOR_INPUT
EXPORTING
I_READY_FOR_INPUT = 0.
ENDIF.
ENDCASE.
Regards,
Aswin -
Change Layout in Selection Screen for OO ALV-Grid
Hello everyone,
I got a problem regarding layouts for objectoriented ALV Grid. I want to make it possible that user can take the layout for ALV he wants to on the selection screen. So far thats no problem and it works. But there are some little problems which I do not know how to fix them. But first the facts:
(1) I got my parameter for layout
PARAMETER: p_vari TYPE disvariant-variant.
(2) I fill my global layout structure in initialization
INITIALIZATION.
* Variante vorbelegen
gs_variant-username = sy-uname.
gs_variant-report = sy-repid.
* Layout holen
CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = gs_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc = 0.
p_vari = gs_variant-variant.
ENDIF.
(3) I got my handling for F4-value help on variant parameter
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
CALL FUNCTION 'LVC_VARIANT_F4'
EXPORTING
is_variant = gs_variant
i_save = 'A'
IMPORTING
es_variant = gs_variant
EXCEPTIONS
not_found = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE text-m01 TYPE 'S'.
ELSE.
p_vari = gs_variant-variant.
ENDIF.
(4) I give back my parameters content into the variant structure at start of selection
START-OF-SELECTION.
gs_variant-username = sy-uname.
gs_variant-report = sy-repid.
gs_variant-variant = p_vari.
This works all fine but I got some problems when using default variants/layouts. For example I got a default variant only for me. When starting the selection screen it works fine that the default layout was written. It is displayed automatically in the variant parameter. But I want that if i I empty the content (blank it out) from my variant parameter, that report should start with "normal" layout how it was written in the report and NOT with default layout.
When I clear the gs_variant it works like I want it, but then the alv layout button looks like (without functions for layout), because I do not have the reference to my report.
So what to do? :-)
Regards
MichaelWow that was fast, works great, thanks :-)
I did not use this parameter in set table method but now I fill it dynamically.
Ok next problem, one step harder ;-)
Now I have one selection screen for one ALV-Grid, but four radio buttons which control with which data the ALV gets filled (four different fieldcats, data tables and so on). Each Grid got an own HANDLE so that the layouts can be separated in four categories.
Now I want that by changing the radio button the individual standard layout for the chosen alv grid is getting filled.
This works fine when using it in selection screen output.
AT SELECTION-SCREEN OUTPUT.
CLEAR gs_variant.
* Layout-Handles individuell für Klausel-Radiobuttons setzen
IF p_py IS NOT INITIAL.
gs_variant-username = sy-uname.
gs_variant-report = sy-repid.
gs_variant-handle = 'KLPY'.
ELSEIF p_rh IS NOT INITIAL.
gs_variant-username = sy-uname.
gs_variant-report = sy-repid.
gs_variant-handle = 'KLRH'.
ELSEIF p_aj IS NOT INITIAL.
gs_variant-username = sy-uname.
gs_variant-report = sy-repid.
gs_variant-handle = 'KLAJ'.
ELSEIF p_sr IS NOT INITIAL.
gs_variant-username = sy-uname.
gs_variant-report = sy-repid.
gs_variant-handle = 'KLSR'.
ENDIF.
* Layout holen
CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = gs_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc = 0.
p_vari = gs_variant-variant.
ELSE.
CLEAR p_vari.
ENDIF.
But unfortunately selection screen output is getting passed by EACH changing in the selection screen. This means when I try to clear the default layout in my parameter field, it gets refilled automatically with default layout. If I do a condition around the filling (only if not initial) the default value filling does not work fine in every case, e.g. when clearing the parameters field and then change the radiobutton -> then it does not get filled automatically. -
How to display lead selection ONLY in the ALV
HI All,
User would like display the selected records in ALV .
i suggested that add two button - "Display ALL" & "Display Selected" .
How can i only display the lead selection only in the ALV? or Hide un-selected records.
Please help.
Thank you so much
GordonHi,
Pelase have a look.. same requirement.
get_selected_elements method for ALV
Re: select rows in alv and show them in another alv in another view
Web dynpro ALV table copy selected row
cheers,
Kris. -
Automatic refresh in alv grids
Hi!
I've three containers with three alv grids on my screen.
I've a self made save-button on the toolbar of the first grid.
Now i insert data in grid2 and grid3 ...
When i press now the save-button from grid1 there's no data in the internal tables from grid2 and grid3.
When i first press the refresh-buttons on the toolbars from grid2 and grid3 and then the save-button from grid1 the internal tables from grid2 and grid3 are filled.
Is it possible to simulate first the pressed refresh-buttons from grid2/grid3 when pressing the save-button from grid1?
I've tried to set a "call method grid2->refresh_table_display" and "call method grid2->refresh_table_display" before the code for the save-button but this doesn't work.
Is there any help for me?
Thanks a lot in advance!
IngoHello Ingo
It is important to realise that pushing a toolbar button does <b>NOT </b>trigger PAI of the dynpro where the ALV list is displayed.
In order to refresh the display of the other two ALV grids you need to pass PAI (followed by PBO). How to do that? There are at least two possible ways:
(1) You handle the SAVE command in your method HANDLE_USER_COMMAND. Within this method you update the internal tables for grid2 and grid3 depending on the contents of grid1. At the end of this method you call method CL_GUI_CFW=>set_new_ok_code( 'REFRESH' ). This will trigger PAI of the dynpro. In the PAI module (e.g. USER_COMMAND_0100) you could write the following coding:
CASE gd_okcode.
WHEN 'REFRESH'.
go_grid2->refresh_table_display( ).
go_grid3->refresh_table_display( ).
ENDCASE.
(2) You handle the SAVE command in your method HANDLE_USER_COMMAND and call method CL_GUI_CFW=>set_new_ok_code( 'REFRESH' ) without updating the itab2 and itab3 here. The updating of these itabs occurs in the PAI module.
The following sample report shows you the second approach. On the first ALV grid customers are displayed. If you double-click on a single customer its sales areas (if any) are displayed in the second ALV list.
*& Report ZUS_SDN_TWO_ALV_GRIDS
REPORT zus_sdn_two_alv_grids.
DATA:
gd_okcode TYPE ui_func,
go_docking TYPE REF TO cl_gui_docking_container,
go_splitter TYPE REF TO cl_gui_splitter_container,
go_cell_top TYPE REF TO cl_gui_container,
go_cell_bottom TYPE REF TO cl_gui_container,
go_grid1 TYPE REF TO cl_gui_alv_grid,
go_grid2 TYPE REF TO cl_gui_alv_grid,
gs_layout TYPE lvc_s_layo.
DATA:
gt_knb1 TYPE STANDARD TABLE OF knb1,
gt_knvv TYPE STANDARD TABLE OF knvv.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING
e_row
e_column
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
* define local data
DATA:
ls_knb1 TYPE knb1.
CHECK ( sender = go_grid1 ).
READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row-index.
CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
CALL METHOD go_grid1->set_current_cell_via_id
EXPORTING
* IS_ROW_ID =
* IS_COLUMN_ID =
is_row_no = es_row_no.
* Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DETAIL' ).
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_knb1
WHERE bukrs = '1000'.
* Create docking container
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create splitter container
CREATE OBJECT go_splitter
EXPORTING
parent = go_docking
rows = 2
columns = 1
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = go_cell_top.
CALL METHOD go_splitter->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = go_cell_bottom.
* Create ALV grids
CREATE OBJECT go_grid1
EXPORTING
i_parent = go_cell_top
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid1.
CREATE OBJECT go_grid2
EXPORTING
i_parent = go_cell_bottom
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Display data
gs_layout-grid_title = 'Customers'.
CALL METHOD go_grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'KNB1'
is_layout = gs_layout
CHANGING
it_outtab = gt_knb1
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
gs_layout-grid_title = 'Customers Details (Sales Areas)'.
CALL METHOD go_grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'KNVV'
is_layout = gs_layout
CHANGING
it_outtab = gt_knvv " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
EXPORTING
repid = syst-repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
* Refresh display of detail ALV list
CALL METHOD go_grid2->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
WHEN 'BACK' OR
'END' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
* User has pushed button "Display Details"
WHEN 'DETAIL'.
PERFORM entry_show_details.
WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form ENTRY_SHOW_DETAILS
* text
* --> p1 text
* <-- p2 text
FORM entry_show_details .
* define local data
DATA:
ld_row TYPE i,
ls_knb1 TYPE knb1.
CALL METHOD go_grid1->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_knb1 INTO ls_knb1 INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT * FROM knvv INTO TABLE gt_knvv
WHERE kunnr = ls_knb1-kunnr.
ENDFORM. " ENTRY_SHOW_DETAILS
Regards
Uwe -
Multiple Selection on Matchcode in ALV Grid
I need to implement a Matchcode with multiple selection on a Field in an ALV Grid. On F4 in this specific Field the specific matchcode muss be enable with multiple selection. And after multiple selection by the user, the result muss be concatenate and insert to this field.
Any suggestions or code?
Thanks and Best Regards
FranckCheck the program: BCALV_TEST_GRID_F4_HELP.
IN the code, search foor the fm: F4IF_FIELD_VALUE_REQUEST.
You should pass the parameter MULTIPLE_CHOICE = 'X' for multiple choice in the F4 pop up.
Once you get the returned table, you can concatenate the result and put it it the target field.
Regards,
Ravi -
Selecting Multiple Rows from ALV GRID Display
Hi,
I am having a ALV GRID Display. I want to select multiple rows from the Output and move them to an internal table.
Please let me know how do I acheive this.
Thanks in advance,
Ishaq.Hi,
Have a look on the following code. It displays the selected rows which hv been selected in basic list.
TABLES:
spfli.
TYPE-POOLS:
slis.
DATA:
BEGIN OF t_spfli OCCURS 0,
checkbox.
INCLUDE STRUCTURE spfli.
DATA: END OF t_spfli.
DATA:
t_sspfli LIKE STANDARD TABLE OF t_spfli .
DATA:
fs_spfli LIKE LINE OF t_sspfli.
DATA:
fs_layout TYPE slis_layout_alv,
w_program TYPE sy-repid.
SELECT *
FROM spfli
INTO CORRESPONDING FIELDS OF TABLE t_spfli.
*fs_layout-info_fieldname = 'COLOR'.
fs_layout-box_fieldname = 'CHECKBOX'.
w_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = w_program
i_callback_pf_status_set = 'FLIGHT'
i_callback_user_command = 'SPFLI_INFO'
i_structure_name = 'SPFLI'
is_layout = fs_layout
TABLES
t_outtab = t_spfli
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form FLIGHT
text
-->RT_EXTAB text
FORM flight USING rt_extab TYPE slis_t_extab..
SET PF-STATUS 'FLIGHT' EXCLUDING rt_extab.
ENDFORM. "FLIGHT
*& Form SPFLI_INFO
text
-->UCOMM text
-->SELFIELD text
FORM spfli_info USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
selfield-refresh = 'X'.
CASE ucomm.
WHEN 'FLIGHT'.
LOOP AT t_spfli.
IF t_spfli-checkbox = 'X'.
t_spfli-checkbox = ' '.
t_spfli-color = 'C51'.
MODIFY t_spfli TRANSPORTING checkbox.
fs_spfli = t_spfli.
APPEND fs_spfli TO t_sspfli.
ENDIF.
ENDLOOP.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
CLEAR fs_spfli.
fs_layout-info_fieldname = 'COLOR'.
fs_layout-confirmation_prompt = 'X'.
fs_layout-key_hotspot = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = w_program
i_structure_name = 'SFLIGHT'
is_layout = fs_layout
TABLES
t_outtab = t_sspfli
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH t_sspfli.
ENDFORM. "SPFLI_INFO
Regards,
Chandu -
Selecting multiple rows in alv grid
my requirement is i want to send the data from alv grid to smartforms using check boxes from report output but without using either oo framework or layout-box_fieldname.can anybody give me the solution?
in fieldcatalog you have to use CHECKBOX = 'X' INPUT = 'X' and EDIT = 'X' for the columns which ever you want to be check box .
You need use the Function moduel in the user command to get the updated data with checked value.
GET_GLOBALS_FROM_SLVC_FULLSCR
follow the sample code.
REPORT ZTEST_ALV_CHECK MESSAGE-ID ZZ .
TYPE-POOLS: SLIS.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
L_LAYOUT TYPE SLIS_LAYOUT_ALV,
X_EVENTS TYPE SLIS_ALV_EVENT,
IT_EVENTS TYPE SLIS_T_EVENT.
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
CHK(1),
color(4),
END OF ITAB.
SELECT VBELN
POSNR
FROM VBAP
UP TO 20 ROWS
INTO TABLE ITAB.
X_FIELDCAT-FIELDNAME = 'CHK'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
X_FIELDCAT-INPUT = 'X'.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-CHECKBOX = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-HOTSPOT = 'X'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_LAYOUT-info_fieldname = 'COLOR'.
*L_LAYOUT-ZEBRA = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = L_LAYOUT
I_CALLBACK_PF_STATUS_SET = 'STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM STATUS USING P_EXTAB TYPE SLIS_T_EXTAB.
"Copy the standard program SAPLKKBL , STANDARD status to your program
SET PF-STATUS 'STATUS'.
ENDFORM. " STATUS
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
DATA: GD_REPID LIKE SY-REPID, "Exists
REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
IF REF_GRID IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
CALL METHOD REF_GRID->CHECK_CHANGED_DATA .
ENDIF.
loop at itab where chk = 'X'.
"collect all the records to an internal table here..
endloop.
"Now call your smartform here using SSFFunction module and the get the dynamic function . From there call the Function with the selected values, to show the smartform
RS_SELFIELD-refresh = 'X'.
break-point.
ENDFORM. "USER_COMMAND
Regards
Vijay Babu Dudla -
Multiple selection in DISPLAY only ALV GRID
Hi,
I would like to make the rows of the ALV Grid Display only at the same time I would like to make multiple selection possible.
Multiple selection is possible by giving EDIT = 'X' at the layout level. But then if we give EDIT = ' ' at the fieldcatalogue level or no_input = 'X' at the layout level it is still in Editable mode. Kindly help me.
ThanksHi,
Setting and getting selected rows (Columns) and read line contents
You can read which rows of the grid that has been selected, and dynamic select rows of the grid using methods get_selected_rows and set_selected_rows. There are similar methods for columns.
Note that the grid table always has the rows in the same sequence as displayed in the grid, thus you can use the index of the selected row(s) to read the information in the rows from the table. In the examples below the grid table is named gi_sflight.
Data declaration:
DATA:
Internal table for indexes of selected rows
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
Example 1: Reading index of selected row(s) and using it to read the grid table
CALL METHOD go_grid->get_selected_rows
IMPORTING
et_index_rows = gi_index_rows.
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a valid line'.
EXIT.
ENDIF.
LOOP AT gi_index_rows INTO g_selected_row.
READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
ENDIF.
ENDLOOP.
Example 2: Set selected row(s).
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
CALL METHOD go_grid->set_selected_rows
exporting
it_index_rows = gi_index_rows.
ENDIF.
Make an Exception field ( = Traffic lights)
There can be defined a column in the grid for display of traffic lights. This field is of type Char 1, and can contain the following values:
1 Red
2 Yellow
3 Green
The name of the traffic light field is supplied inh the gs_layout-excp_fname used by method set_table_for_first_display.
Example
TYPES: BEGIN OF st_sflight.
INCLUDE STRUCTURE zsflight.
TYPES: traffic_light TYPE c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
Set the exception field of the table
LOOP AT gi_sflight INTO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
g_wa_sflight-traffic_light = '1'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
ELSE.
g_wa_sflight-traffic_light = '3'.
ENDIF.
MODIFY gi_sflight FROM g_wa_sflight.
ENDLOOP.
Name of the exception field (Traffic light field)
gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_layout = gs_layout
CHANGING it_outtab = gi_sflight.
Color a line
The steps for coloring a line i the grid is much the same as making a traffic light.
To color a line the structure of the table must include a Char 4 field for color properties
TYPES: BEGIN OF st_sflight.
INCLUDE STRUCTURE zsflight.
Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
Loop trough the table to set the color properties of each line. The color properties field is
Char 4 and the characters is set as follows:
Char 1 = C = This is a color property
Char 2 = 6 = Color code (1 - 7)
Char 3 = Intensified on/of = 1 = on
Char 4 = Inverse display = 0 = of
LOOP AT gi_sflight INTO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
g_wa_sflight-line_color = 'C610'.
ENDIF.
MODIFY gi_sflight FROM g_wa_sflight.
ENDLOOP.
Name of the color field
gs_layout-info_fname = 'LINE_COLOR'.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_layout = gs_layout
CHANGING it_outtab = gi_sflight.
Refresh grid display
Use the grid method REFRESH_TABLE_DISPLAY
Example:
CALL METHOD go_grid->refresh_table_display.
ALV Grid Control with column and row selection
Selecting and Deselecting Rows
Use
Depending on where the ALV grid control is used, there are various methods for selecting and deselecting cells and rows:
If no pushbuttons are displayed on the left edge of the list:
You can only select one row at a time.
You can select multiple rows.
If pushbuttons are displayed on the left edge of the list:
You can select several rows or individual cells.
You can select several rows as well as several cells or individual cells.
Procedure
If no pushbuttons are displayed on the left edge of the list, you select a row by clicking an entry in the row.
If pushbuttons are displayed on the left edge of the list, you select a row by clicking the pushbutton on the relevant row.
In this case, you select the relevant cell by selecting the entry in the row.
In both cases:
To select several rows, press the Shift button and choose the cells as described above.
Adjacent rows:
Select a row, choose Shift or Control, and select the desired rows,
or
Choose Shift, and select the first and the last of the desired rows,
or
Select a row, keep the mouse button pressed, and pass over the desired rows.
Rows that are not adjacent:
Select a row, choose Control, and select the desired rows.
All rows:
You can only select all rows at once if pushbuttons are displayed on the left side of your list. To select all rows, choose .
To deselect individual rows, press the Ctrl button and click the relevant row.
Result
The selected cells have an orange background. The position of your cursor is indicated with a yellow background. -
How to get selected records from an ALV Grid in some other internal table
I am using a standard SAP program (RFKKMA02) in a Z program. Now i want to select some rows in ALV and after doing some modification, i want to store those records in some other internal table. I am not using OO concept.
Thanks in advance.u create first internal table of structur of fields that u want to copy and then move taht values to internal table
-
How can I get the selected rows from two ALV grids at the same time?
I have a program that uses two ALV grids in one dialog screen. I'm using the OO ALV model (SALV* classes).
The user can select any number of rows from each grid. Then, when a toolbar pushbutton is pressed, I'd have to retrieve the selected rows from both grids and start some processing with these rows.
It is no problem to assign event handlers to both grids, and use the CL_SALV_TABLE->GET_SELECTIONS and CL_SALV_SELECTIONS->GET_SELECTED_ROWS methods to find out which rows were marked by the user. Trouble is, this only works when I raise an event in each grid separately, for instance via an own function that I added to the grid's toolbar. So, I can only see the selected rows of the same grid where such an event was raised.
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.
As it is right now, I can have an own button in both grid's toolbar, select the rows, click on the extra button in each grid (this will tell me what entries were selected per grid). Then, I'd have to click on a third button (the one in the dialog screen's toolbar), and process the selected rows from both grids.
How can I select the rows, then click on just one button, and process the marked entries from both grids?
Is it somehow possible to raise an event belonging to each grid programmatically, so that then the corresponding CL_SALV_SELECTIONS->GET_SELECTED_ROWS will work?
Thanks.Hello Tamas ,
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.--->
is it possible to have a check box in each grid & get the selected lines in PAI of the screen ?
regards
prabhu -
ABAPer's ,
Does anyone can guide me to select single row only in ALV grid , without OO.Hello,
I did not get u.
But check the below code it may help u.
tables: mara.
TYPE-POOLS: SLIS.
data:repid like sy-repid.
data: itb type mara occurs 0 with header line,
IT_FIELDCAT TYPE STANDARD TABLE OF SLIS_FIELDCAT_ALV WITH HEADER LINE,
IT_LAYOUT TYPE SLIS_LAYOUT_ALV,
ITB1 TYPE MAKT OCCURS 0 WITH HEADER LINE.
selection-screen begin of block b.
parameters: p_matnr type matnr.
selection-screen end of block b.
select * from mara into table itb where matnr = p_matnr.
SELECT * FROM MAKT INTO TABLE ITB1 WHERE MATNR = P_MATNR.
repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'HANDLE_USER_COMMAND'
I_STRUCTURE_NAME = 'MARA'
IS_LAYOUT = IT_LAYOUT
IT_FIELDCAT = IT_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = itb
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM HANDLE_USER_COMMAND USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE
SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
CLEAR IT_FIELDCAT[].
IF RS_SELFIELD-FIELDNAME = 'MATNR'.
READ TABLE ITB1 INDEX RS_SELFIELD-TABINDEX.
WRITE: / ITB1-MAKTX.
ENDIF.
ENDCASE.
ENDFORM. "HANDLE_USER_COMMAND
Regards -
Get Row Data from a selected Row in an ALV Grid
Hello,
I create a Custom Control from an intern table. When i do a double click on a row, i call another dynpro. The data of the marked line should be written into an internal table.
How i implement this?
I tried things like:
Call method alv_list->GET_SELECTED_ROWS_BASE
or
Call method alv_list->GET_SELECTED_ROWSHi Sebastian,
For a double click event we need to register the double click event which goes the following way.
data: lref_alv type ref to cl_gui_alv_grid.
* after initializing ALV
SET HANDLER gref_application->handle_alv_dblclik FOR lref_alv.
Now this double click event needs to be handled in the local class.
eg:
CLASS lcl_application DEFINITION.
PUBLIC SECTION.
METHODS:
* Method to handle double click on ALV grid.............................
handle_alv_dblclik
FOR EVENT double_click
OF cl_gui_alv_grid
IMPORTING e_row
e_column
es_row_no.
endclass.
CLASS lcl_application IMPLEMENTATION.
* Method: HANDLE_ALV_DBLCLICK *
* Text: Event triggers when ALV grid is double clicked *
* -->e_row *
* -->e_column *
* -->es_row_no, *
METHOD handle_alv_dblclik.
data: lv_value(40) TYPE c.
* Get the value of the current cell double clicked......................
CALL METHOD gref_alv->get_current_cell
IMPORTING
e_value = lv_value
* here you can insert the values in the internal table
endmethod.
endclass.
hope this helps.
Regards,
Kinshuk -
Multiple selection of e_ucomm in ALV Grid toolbar
Dear SAP friends,
I have created HR report.
On the selection screen the User enters some initial data and ALV Grid get displayed.
In event Handle_toolbar the program adds a custom button to standard ALV grid toolbar named "ABSENCE/ATTENDANCE".
In event handle_menu_button the program adds functions to this button.
Then in event handle_user_command depending on the function selected "e_ucomm" the program repopulates the ALV Grid.
METHOD handle_toolbar.
* Append a separator to standard toolbar
CLEAR gs_toolbar.
gs_toolbar-butn_type = 3.
APPEND gs_toolbar TO e_object->mt_toolbar.
CLEAR gs_toolbar.
gs_toolbar-function = 'ABSENCE/ATTENDANCE'.
gs_toolbar-icon = icon_position_hr.
gs_toolbar-quickinfo = 'Absence/Attendance Type'.
gs_toolbar-butn_type = 2. " 2-Menu type, 0-single button type
gs_toolbar-disabled = space.
APPEND gs_toolbar TO e_object->mt_toolbar.
ENDMETHOD. "handle_toolbar
METHOD handle_menu_button.
* Handle own menubuttons
IF e_ucomm = 'ABSENCE/ATTENDANCE'.
LOOP AT it_aa INTO it_aa_ln.
MOVE it_aa_ln-type TO w-fcode.
CONCATENATE it_aa_ln-type '=' it_aa_ln-text
INTO w-text
SEPARATED BY SPACE.
CALL METHOD e_object->add_function
EXPORTING
fcode = w-fcode
text = w-text.
ENDLOOP.
ENDIF.
ENDMETHOD. "handle_menu_button
METHOD handle_user_command.
MOVE e_ucomm TO w-abstype.
PERFORM abs_att USING w-abstype.
ENDMETHOD. "handle_user_command
Is there a way to select more than one line or e_ucomm in other words at a time?
I would like to give my user a choice of let's say one report with three types of absences at a time rather than three reports with one type each.
Thanks,
TatyanaThe whole point of a toolbar button is to do a specific function.
What I would actually do here is in your menu button add another option say "User Choice" and when this is clicked throw up another screen say another ALV grid where the user can choose the various combinations or do it via a POPUP. A second grid IMO would be the best way to do it as the user can select easily specific rows.
You can either display the 2nd grid in a 2nd custom container on your main screen where you are showing the ALV grid or pass control to a new screen / program. Using a 2nd container is better as you still will have your instance of the original grid available.
Cheers
Jimbo -
Printing Selection-Screen while printing ALV Grid output display
Hi,
I have a requirement wherein I want to print the Selection Screen also while printing the output in simple ALV grid Display.
Currently when I print the ALV output report, only the header and the Body of the ALV is getting printed. But the requirement is that I also want to print Selection screen along with this.
If anyone has faced a similar situation, plz let me know what needs to be done in order to print the selection screen also while printing the ALV report output.
Rgds,
NitinHi,
You can use given function module to print your
selection screen
RS_REFRESH_FROM_SELECTOPTIONS
>This will get Current contents of selection screen
RS_LIST_SELECTION_TABLE
>This will Generates list according to values in selection table(RSPARAMS)
Sample
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
curr_report = p_repid
TABLES
selection_table = it_int_tab
EXCEPTIONS
not_found = 1
no_report = 2
OTHERS = 3.
IF sy-subrc EQ 0.
WRITE:1 'Selection Criteria'(i19),
/1 sy-uline(18),
/1 'Variant Name'(i21),
23 sy-slset.
*-- This function module lists the Selection Screen contents
CALL FUNCTION 'RS_LIST_SELECTION_TABLE'
EXPORTING
report = p_repid
seltext = 'X'
newpage = space
TABLES
sel_tab = it_int_tab
EXCEPTIONS
sel_tab_empty = 1
OTHERS = 2.
Mark all helpful answers
Maybe you are looking for
-
Problem with losing files in Dreamweaver after they have been saved.
Hello everyone, Presently, I am a student and was working with Dreamweaver in an attempt to build my portfolio Web site. I had my root folder completed and saved my Dreamweaver file, next I and gave it a site, or designated a site, whatever it is cal
-
Sample Servlet Project Please...
Dear All, Can u please send me a sample code using JSP,SERVLET & JAVABEAN with DB Connection Code. with only one attribute called USERNAME. While submitting, it will have to store in the DB and Display the username in the another JSP. It will make me
-
Lockbox Overpayments and tolerance
Hi, Is there a way to post the incoming customer overpayments thru lockbox, to post to customer as " On account"? I tried to do so, but the system still applies the full payment to the invoice ( eg $1000 payment applied to $500 invoice") regardless
-
We plan to deploy 3-tier architecture. Regarding that I have a query im middle tier. Are Forms 6i and Reports 6i part of Oracle 9i AS OR come as a separate products? Thanks in advance. Sundar null
-
Help please.