Reset the Current Number in the Number Ranges

Hello Friends,
Is it possible to change the current number in the number range based on a condition?
My requirement is, I have generated the number using the Function Module NUMBER_GET_NEXT. If the user clicks on Save then the number generated is saved. But if the user doesnt click on save, the number is not saved but the number is wasted. Now if I create a new number that will be the next number in the sequence. I want that if the user has not clicked on save then the same number should be generated again, so that the numbers are not wasted.
regards,
Raju.

Hi
I don't hink it is possible with the number ranges.
Yes, as you said some numbers will be wasted in between.
But in real PRoduction we don't click just like that on SAVe button wasting the numbers.
Check the Tcodes SNUM and SNRO.
Reward points if useful
Regards
Anji

Similar Messages

What is the current magic mouse model number?

What is the current magic mouse model number?

It’s MB829LL/A; the fourth and fifth letters may vary by country.
(116783)

What should be done to include the current controlfile in the database copy

Hi
When trying to create a copy of the database it always fails copying the controlfile
What should be done to include the current controlfile in the database copy with the %b format
RMAN> backup as copy database format 'd:\backup\%b'
2> ;
Starting backup at 13-SEP-10
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile copy
input datafile file number=00001 name=D:\ORACLE\ORADATA\ORCL\SYSTEM01.DBF
output file name=D:\BACKUP\SYSTEM01.DBF tag=TAG20100913T204940 RECID=16 STAMP=729636617
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile file number=00003 name=D:\ORACLE\ORADATA\ORCL\UNDOTBS01.DBF
output file name=D:\BACKUP\UNDOTBS01.DBF tag=TAG20100913T204940 RECID=17 STAMP=729636660
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile file number=00002 name=D:\ORACLE\ORADATA\ORCL\SYSAUX01.DBF
output file name=D:\BACKUP\SYSAUX01.DBF tag=TAG20100913T204940 RECID=18 STAMP=729636692
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
*copying current *control file**
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/13/2010 20:51:36
ORA-19715: invalid format b for generated name
ORA-27302: failure occurred at: slgpn
continuing other job steps, job failed will not be re-run
channel ORA_DISK_1: starting datafile copy
input datafile file number=00004 name=D:\ORACLE\ORADATA\ORCL\USERS01.DBF
output file name=D:\BACKUP\USERS01.DBF tag=TAG20100913T204940 RECID=19 STAMP=729636697
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:01
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
*including current SPFILE in backup set*
channel ORA_DISK_1: starting piece 1 at 13-SEP-10
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/13/2010 20:51:38
ORA-19715: invalid format b for generated name
ORA-27302: failure occurred at: slgpnEdited by: hrishy on Sep 13, 2010 8:26 AM

hrishy wrote:
Allright your trick configure controlfile autobackup on does the trick but i am cluless why it worksWhy clueless? That's a documented and a perfectly normal behavior!
http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/rcmconfb.htm#BRADV89408
HTH
Aman....

What is the current version of the iPod firmware?

Hello,
I'm currently running the "other OS" and can't get iTunes.
Could someone please tell me what the current version of the iPod firmware is? This way, I'll know whether I need to go to a Mac or PC computer to update the firmware of my 5th gen iPod. Thank you very much.

This question is now answered. I wonder if there's a webpage that will post the most current version number when the firmware changes. I guess I could keep asking every now and then. Or one of the Apple iTunes users can update all of us when iTunes lets him know that version has changed.

Unable to upload "filescopied_48862.txt" to update the current view of the

Hi Team,
While applying applications patch I am getting the below error in the patch log file.
Start Processing Snapshot Info
AutoPatch error:
Unable to upload "filescopied_48862.txt" to update the current view of the snapshot.
But when I checked in the ad_bugs table it is showing the bug_number.Actually this patch has to change the version of file fadp6.lpc,but it is not changing it.
We already have updated current view snapshot.
Please suggest me on this.
Thanks,
Suresh

Hi Hussein,
Thanks for quick reply and the details are:
Q)Please post the application release, database version and OS.
ApplicationRelease:R12.1.1
Database Version:11.1.0.7
OS:Windows Server 2008(32 bit)
Q).What is the patch number?
12338963
Q).Is this the complete error message?
In the whole patch log file this is the only error it is showing.
Q).Did the patch continue to run after this error and completed successfully?
Yes It has continued to run after this error and completed successfully.
Q).Please apply the patch again from the beginning and see if you encounter the same issue.
I have applied the patch again from the beginning and we are getting the same error.
The only error in patch log file it is showing is:
Start Processing Snapshot Info
AutoPatch error:
Unable to upload "filescopied_48862.txt" to update the current view of the snapshot.
Q).What is the version of fadp6.lpc you already have? What is the version of fadp6.lpc delivered by this patch? Have you verified the timestamp of the file?
fadp6.lpc 120.36.12010000.7 and the timestamp is:2009/07/28 07:55:40
Version of fadp6.lpc delivered by this patch is:120.36.12010000.13
Thanks,
Suresh

How to interpret the current day of the month

I am a rookie in java and am trying to play with the Calendar class.
The DATE static field of this class says it returns "Field number for get and set indicating the day of the month."
So, Calendar.DATE has to return the current day of the month.
Today is 7th of january. So, it should return 7. But, I am getting a value of 5.
I am very much confused. I fell that my interpretation os wrong.
Please help.............
Thanks in advance.

You must NOT confuse the value of the constant Calendar.DATE (5) and how you can use that constant to retrieve the current day of the month.
        Calendar cal = Calendar.getInstance(); // Gets the current date
        int dayOfMonth = cal.get(Calendar.DATE); // Gets he current day of the month from the current date
                                                 // (Using the Calendar.DATE constant as method parameter).
        System.out.println("Calendar.DATE = " + Calendar.DATE); // Prints the constant
        System.out.println("dayOfMonth = " + dayOfMonth); // Prints the current day of month

Error occurred in deployment step 'Add Solution': Operation is not valid due to the current state of the object

hi,
when i was trying to deploy a SP solution from my vs 2012 solution. this error is displayed.
i tried many things like
1) get the wsp and apply power shell cmds to add and deploy, here also it failed:
Add-SPSolution -LiteralPath d:\mywsp.wsp
Install-SPSolution mywsp.wsp -GacDeployment -AllWebApplications -Local
2) restart the timer services and do iisreset and reboot the server. etc .as mentioned in one of the the below blogs:
http://sharepoint1on1.blogspot.in/2014/04/sharepoint-error-occurred-in-deployment.html
http://suehernandez.wordpress.com/2011/03/31/error-occurred-in-deployment-step-activate-features-operation-is-not-valid-due-to-the-current-state-of-the-object/
http://www.dotnetsharepoint.com/2014/04/error-occurred-in-deployment-step-add.html
http://social.msdn.microsoft.com/Forums/en-US/63adde23-03cf-4b65-923e-1219da94a780/error-occurred-in-deployment-step-add-solution-operation-is-not-valid-due-to-the-current-state-of?forum=sharepointdevelopmentprevious
http://www.shakirmajeed.com/error-occurred-in-deployment-step-activate-features-operation-is-not-valid-due-to-the-current-state-of-the-object/
but even after doing all these steps, the error still persists!. and am not deploying into a remote server, the dev env is in a VM, where sp 2013, vs 2012, sql 2012 are installed.
just wanna share one note: there is a isue in my search admin component. index was reset due to some reason. and from that time onwards my search full/incremental crawls were not working!
will this cause an issue in my wsp deployment ? i hope it wont, still asking...
can anyone help me how to resolve this error.because this is a show stopper for me for the last few days!
help is highly appreciated!

This issue cause because of feature activation failure while WSP deployment.
when you create a WSP using visual studio, it creates WSP package with default deployment configuration settings.
Please restrict feature activation configuration, this will help you to troubleshoot this issue.
- Click on Project in WSP and press F4, it will open "Project Properties"
- set "Active deployment Configuration" - as "No Activation"
- you can activate this features in required sequence after deployment using Activate-SPFeature
If my contribution helps you, please click Mark As Answer on that post and Vote as Helpful
Thanks, ShankarSingh(MCP)

Creation of a Query to show the values for the current month and the last 12 months data.

Dear All,
Good day!
I have to create a Query with the below requirement.
I have to create a Query to show the values for the current month and the last 12 months data.
Can you please guide me how to achieve this ??
thank you,
Regards,
Hema

Hema
explain the exact problem..? as you mentioned you want to create query to show values for current month and last 12 months.. so I think you want to show values for 12 months from current data.. you can achive this by multiple way..
you can have selection screen and field with date .. and restrict based on system current date and 12 months before or you can handle this at your target.. .. I mean there are multiple ways to restrict data by date range..
for some more hints..
http://www.forumtopics.com/busobj/viewtopic.php?t=34393&sid=7fba465d0463bf7ff5ec46c128754ed6
http://businessintelligence.ittoolbox.com/groups/technical-functional/cognos8-l/how-to-display-last-12-months-in-report-based-on-todays-date-3231850
http://scn.sap.com/thread/3217381
search on SDN you will get many other ways..
Thanks,
Bhupesh

A better way to determine the current state of the FLVPlayback component?

Below is the AS3 code I have used to display images (MCs) over an instance of the FLVPlayback component. These images (one for loading, one for the title) are to appear – or disappear – according to the current state of the FLVPlayback component.
It “works,” but when testing, I have noticed that it can be rather finicky. The most common issue that arises is that many times the loadPoster movieclip will still be visible even though the video has entered the playing state.
Also, I wanted a title placeholder image to appear whenever the user stops the video or if the video completes. However, I had to add the conditional statement to the “stoppedStateEntered” case to make everything appear when expected. When the video is first viewed (and has completed buffering), it seems that the FLVPlayback component enters the stopped state before entering the playing state. Thus, the titlePoster would flash on the screen right before it and the loadPoster “should” disappear when the video begins playing.
Even in my limited testing, these issues were very easily re-created. I am definitely looking for a more reliable solution. Is there a better (or more correct) way to go about all this? If possible, I would like to stick with the FLVPlayback component, just for the simple fact of not having to code my own.
Where am I going wrong?
function updateMoviePoster(event:VideoEvent):void
                switch (event.type)
                                case "playingStateEntered":
                                                loadPoster.visible = false;
                                                titlePoster.visible = false;
                                break;
                                case "stoppedStateEntered":
                                                if (loadPoster.visible == false)
                                                                titlePoster.visible = true;
                                break;
                                case "complete":
                                                titlePoster.visible = true;
                                break;
myFLVPlayback.addEventListener(VideoEvent.PLAYING_STATE_ENTERED, updateMoviePoster);
myFLVPlayback.addEventListener(VideoEvent.STOPPED_STATE_ENTERED, updateMoviePoster);
myFLVPlayback.addEventListener(VideoEvent.COMPLETE, updateMoviePoster);

Any suggestions? I would truly appreciate the help.

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive. Help

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

Error_27_Error occurred in deployment step 'Activate Features': Operation is not valid due to the current state of the object.

I created a SharePoint 2013 farm solution project in Visual Studio 2013 (running on the same machine where SharePoint 2013 server is running) with
event receiver. I added web.config at project root level to store connection string (I'm working off external SQL DB) and got the following error during deployement:
Error 27
Error occurred in deployment step 'Activate Features': Operation is not valid due to the current state of the object.
When I commented out the ConfigurationManager.ConnectionStrings["MyConnectionString"].ConnectionString; the error went away. Am I missing something or not supposed to add my own App.config to SharePoint project solution?

Hi,
From your description, you might want to store your connection string in web.config and there is an error during deployment.
It is recommended to store the configuration data of SharePoint solution in either property bags or hierarchical object store.
The links below will provide more information about this:
http://blogs.msdn.com/b/zwsong/archive/2012/03/27/where-should-you-store-your-sharepoint-solution-s-configuration-data.aspx
http://msdn.microsoft.com/en-us/library/ff647766.aspx
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they
help and unmark them if they provide no help. If you have feedback for TechNet
Subscriber Support, contact [email protected]
Patrick Liang
TechNet Community Support

How to get the Current User on the UI page?

All,
Could you please let me know how to get the Current user on the UI input page , i need to display the current user ID when some one clicks the submit button, i want o get the current user to display in the javascript alert box.
Edited by: 951930 on Oct 24, 2012 12:21 PM

lucky,
my schema has already defined for
<user mapField="USER_ID" default="%CurrentUser"/>
and in my UI page
<td oraLabel="user"></td><td oraField="user" id="userId" ></td>
and my javascript
function showUserId () {
var curUser = document.getElementById('userId').value;
alert(curUser);
and i have called this function on my submit button, but i am not able to get Current Logged User ID value to show in the alert nor able to show the current logged user on the UI page.
my requirement is on custom UI page i need to show Current Logged User in one corner of the page and also need to show the same user in alert when he submits the button.
Appreciate for the help.
Edited by: 951930 on Oct 25, 2012 8:42 AM
Edited by: 951930 on Oct 25, 2012 9:06 AM

How to capture the current info in the top-of-page event in Reuse block dis

How to capture the current info in the top-of-page event in Reuse block dis

Hi Geetha,
     If you don't have any information to pass the Heading Block, then why you are using this event ?
     please comment/ remove that TOP_OF_PAGE code. and use subtotal code in field catalog block.
      you can use below code for subtotal.
      FORM field_catalog .
                gs_fcat-do_sum = &2.
          fcat : 'WRBTR' '15' 'X' ' ' ' ' 'WRBTR' 'Amount',
       ENDFORM.
       Regards,
       Kunjan

MS SQL server is going down frequently(10 days of gap) with exception message: "A severe error occurred on the current command. The results, if any, should be discarded".

MS SQL server is going down frequently(10 days of gap) with exception message: "A severe error occurred
on the current command. The results, if any, should be discarded". We are facing this issue for past two month.But funny thing is server will be up automatically with out any service restart manually. Also if we try to restart the SQL
server service manually then SQL server will be in a dead lock situation and it will not come up even if we wait for long time. Then we should do a windows server machine restart to
make the SQL sever up. As a suggestion from Microsoft to fix this kind of similar issue,
we have installed service pack 3 for SQL Server. But even after we are facing same issue.
Server Details:
Server OS: Windows Server 2008 R2
Two type of database servers are installed on server:
1. MS SQL Server 2008 R2
2. My SQL
Also Reporting server is configured for the purpose of generating SSRS report from a dot net website.
NOTE:Immediately after the data retrieval/save, we are closing the connection explicitly by the
application.
we have checked the windows event log and below are the details:
Log Name:      Application
Source:        ASP.NET 4.0.30319.0
Application information:
    Application domain: /LM/W3SVC/5/ROOT-1-130718142067856406
    Trust level: Full
    Application Virtual Path: /
    Application Path: E:\WebSpaceFolder\ACSQuiK\Production\
    Machine name: DBSERVER
Process information:
    Process ID: 148
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: SqlException
    Exception message: A severe error occurred on the current command. The results, if any, should be discarded.
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
Log Name:      Application
Source:        Report Server Windows Service (MSSQLSERVER)
Description:
Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Report Server Windows Service (MSSQLSERVER)" />
    <EventID Qualifiers="0">107</EventID>
Could anybody can suggest any kind of fix for this issue? Thanks in advance.

Hi YesYemPee,
I have tried but still not clear about your issue, I would like you provide more details information about your issue based on below points to better analysis about the issue:
What action did you do and caused the error "A severe error occurred on the current command. The results, if any, should be discarded", did you run report on the web application or something else then the error happen?
If you rendering the report and got the error, please try to provide us more error information in the log files which path like:
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles
If it is not the case in step1, Please try to provide SQL Server Error log(SQL Server Logs) and more details information.
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

How can I get the current user and the current page?

Hi everyone
Question..
It is possible to get the current user (from the user's database on apex) and the current page? (I mean, if I'm in page 4 be able to query a variable / function or something which could give me the current displayed page)
Thank you very much... I'd been researching without success :-S so I'll appreciate your help
Regards,
Fury

Fury,
If the user has authenticated, :APP_USER is the name that was used. The current page id is in :APP_PAGE_ID.
Although I showed bind variable notation for those, & substitution format and v() notation are also available for referencing developer-defined items or built-in names. See the User's Guide for more details.
Scott

Acrobat Pro "save as" function in the file menu does not show the current directory of the file

I have installed CC but Acrobat Pro gives me headaches.
The "save as" function in the file menu does not show the current directory of the file but something I have worked on in the past.
It forces me to navigates through my hard disk for this very straightforward thing in normal conditions. I precise: Acrobat is the only software reacting like that.
I use Windows7 professional 64bits.

I use what seems to be the latest version available on the Cloud:
To illustrate my point, I open a directory with explorer and double-click on the only PDF in there:
So here it is, open:
When I do a "Save as", it takes me to a totally different place on the disk!
Very annoying...
Thanks for your time!
JJ

Reset the Current Number in the Number Ranges

Similar Messages

Maybe you are looking for