Reset web service runtime statistics in WLS

can someone pls guide me how to do that with WLST for a particular webservice?
It must be possible since I can do it from the Service Bus console as well.
any infos are appreciated,
thanks,
Barossa

Hi Martin,
From what I can understand ,It seems like the node /sap/bc is not active in sicf.
Do the following:
1) Logon to the ABAP Server
2) Goto transaction "sicf"
3) It takes you to the maintain services screen, click "execute" button
4) On the next screen, under "default host", you can see sap-->bc
5) Right click node "bc" and select "activate". Activate the entire subtree.
This should hopefully solve your problem.
Regards,
Sangeetha

Similar Messages

  • Errors configuring the Web Service Runtime

    Hi All, I'm trying to configure the Web Service Runtime using SRT_ADMIN on SAP Netweaver Trial 7.02.
    I have almost everything working, except three things. I ran SRT_ADMIN_CHECK and i got the following messages:
    Checking cross-system settings
    bgRFC destination is operational
    bgRFC supervisor destination is registered
    WSRM event handler is active
    Task watcher is active
    Data collector for monitoring is not activated
    ICF node is active. /sap/bc/srt/
    ICF node is active. /sap/bc/srt/wsil
    ICF node is active. /sap/bc/srt/wsdl
    ICF node is active. /sap/bc/srt/esf_in
    ICF node is active. /sap/bc/srt/xip
    ICF node is active. /sap/bc/srt/rfc
    ICF node does not exist. /sap/bc/srt/pm
    ICF node is active. /sap/bc/srt/xip/sap
    ICF node does not exist. /sap/bc/srt/scs
    Some of the SRT ICF nodes are inactive or do not exist
    Ending check of cross-system settings
    I checked in SICF and these two services does not exist in the tree. These two unexsting services are a limitation of the trial version?. If not, then how can I create them, if so, what are the parameters? Can I download a note or a manual regarding these two services?. Also how can I activate the data collector?

    Hi Mauro,
    Please check SAP Note 1501709 for the missing nodes issue.
    Regarding the Data Collector, I've never seen this activated anywhere before - without any repercussions. You could maybe try doing some research on a background job called SAP_SRT_COLLECTOR_FOR_MONITORING though.
    Regards, Trevor

  • Web service runtime Config - SRT_ADMIN_CHECK not correct

    Hello to all,
    I have config the web service runtime as it is shown in note 1043195 or in help.sap.com:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/44/2bd53ecb69060be10000000a155369/frameset.htm
    Now I check the configuration with the Report SRT_ADMIN_CHECK.
    The table shows following entries:
    Prüfung der systemübergreifenden Einstellungen
    Die bgRFC Destination  ist nicht betriebsbereit!
    Die bgRFC Supervisor Destination ist registriert
    WSRM Event Handler ist aktiv
    Task Überwacher ist aktiv
    Datenkollektor für Monitoring ist nicht aktiviert!
    ICF Knoten ist aktiv. /sap/bc/srt/
    ICF Knoten ist aktiv. /sap/bc/srt/wsil
    ICF Knoten ist aktiv. /sap/bc/srt/wsdl
    ICF Knoten ist aktiv. /sap/bc/srt/esf_in
    ICF Knoten ist aktiv. /sap/bc/srt/xip
    ICF Knoten ist aktiv. /sap/bc/srt/rfc
    ICF Knoten existiert nicht. /sap/bc/srt/pm
    SRT ICF Knoten sind z.T. nicht aktiv oder nicht vo
    Ende der Prüfung der systemübergreifenden Einstellungen
    Prüfungen der mandantenabhängigen Einstellungen
    Service Destination in Mandant 001 ist nicht konfiguriert
    Service Destination in Mandant 066 ist nicht konfiguriert
    Ende der Prüfungen der mandantenabhängigen Einstellungen
    Mandantenabhängige Verbindungsprüfungen (Destinationen)
    Verbindungstest in Mandant 000 gelungen
    Service Destination in Mandant 001 nicht registriert
    Service Destination in Mandant 066 nicht registriert
    Verbindungstest in Mandant 100 gelungen
    Ende der mandantenabhängigen Verbindungsprüfungen(Destinationen)
    Now my questions:
    1. How could I resolved the problem with the bgRFC destination is not operational?
    2. How could I activate the Data collector for monitoring?
    3. Why do not exists the ICF node /sap/bc/srt/pm and how to resolve this error?
    Thanks and regards
    Martin

    Hi Martin,
    From what I can understand ,It seems like the node /sap/bc is not active in sicf.
    Do the following:
    1) Logon to the ABAP Server
    2) Goto transaction "sicf"
    3) It takes you to the maintain services screen, click "execute" button
    4) On the next screen, under "default host", you can see sap-->bc
    5) Right click node "bc" and select "activate". Activate the entire subtree.
    This should hopefully solve your problem.
    Regards,
    Sangeetha

  • Setting Web service runtime

    Hi
    How can i change the Web Service runtime in the IDE studio from "Apache Axis" to "Sap NetWeaver"?
    Regards
    Raja

    Hi Raja,
    Are you really using the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloads?rid=/library/uuid/da699d27-0b01-0010-99b0-f11458f31ef2">java EE 5 version</a> from SDN? Because it works as described in there.
    -Vladimir

  • Problems with using old web service project with new WLS/OEPE install

    I developed a java web service two years ago using WLS 10.3.3 and OEPE. After development I checked the workspace into Subversion including the .metadata directory. The web service was deployed to a production WLS box and is running fine.
    Now I have a new Windows 7 desktop computer. I have installed WLS 10.3.3 and OEPE on my new desktop and am trying to get the web service I wrote two years ago to run locally. When OEPE launches I point the workspace to the workspace project directory (from two yrs ago) that I have just checked out from Subversion. However when the OEPE IDE comes up I have many errors in the java code. Pretty much every java class is flagged with a "cannot be resolved to a type" error.
    Also, when I try to create a new server and domain, I have a problem there. I select "Oracle WebLogic Server 11gR1 PatchSet 2" as the server type, click Next on the wizard, but then on the next window where you select the Domain, the Domain Directory is disabled and will not let me enter a value, and the link to allow you to create a new Domian is not visible.
    Feeling kind of stupid as this should be really simple to do. Am I proceeding correctly by saving off the entire workspace and then trying to use that workspace in the new WLS/OEPE install? Any help would be greatly appreciated.

    Have you tried creating a new workspace, then import the project from your subversion workspace?

  • Web Service 'Home Page' in WLS 9, can I have one like WLS 8.1 ?

    Hi,
    I've been using Web Services on WebLogic Server for a long time. I've just migrated from WLS 8.1 to WLS 9.2.
    With 8.1, if a user entered the Endpoint of the Web service in a browser they got a nice page which showed the operations for the Web Service.
    With 9.2 I'm getting a very basic page with a link to the WSDL and to the Test Page.
    Is there any way I can get a nice page that looks like the one in 8.1 ?
    Thanks
    Dave

    Not sure if this is an exact match to your problem, but I've had problems with systems based on WebAS 7.00 truncating the hostname when generating the url for the WSDL.  You may want to check the hostname is complete.
    Regards,
    Nick

  • Performance of web services with XMLBeans on WLS 9

    We are planning to use XMLBeans extensively for web services development on WLS. Recently another group within our company did a performance study indicating horrible performance with XMLBeans and WLS 9.2 especially when processing long requests (> 1000 xml elements). This puts in question whether XMLBeans with WLS 9.x is actually the right platform for us to build/host a large number of services.
    XMLBeans is a highly regarded XML<->Java binding tool as explained in numerous past articles both on Dev2Dev and other technology websites. We also understand that it is an integral technology used by other BEA products such as WLI and Liquid Data.
    We are wondering if BEA has any resources/reports on performance of web services (which uses XMLBeans) on WebLogic. Thanks.
    Edited by ductrinh at 06/04/2007 1:05 PM
    Edited by ductrinh at 06/04/2007 1:06 PM

    Hi,
    We test several frameworks and find out that usually JAXB 2.0 performs better than XMLBeans, but that is not a strict rule.
    Regards,
    LG

  • Web Service Runtime error

    Hello everyone
    In our newly built AP0 ( dev, qa & prod ) systems there are many errors of web service and now the systems are being used by Users.
    Error --> 000 SAPSYS WS 4 Error in techincal configuration Error during the retrieval of the  logon data store,
    checked the below link .
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/4420e292b75e3fe10000000a11466f/frameset.htm
    Followed the help and  ran the report SRT_ADMIN_CHECK
    I see that the RFC is not defined and BG job (SAP_SOAP_RUNTIME_MANAGEMENT) is configured.
    The above BG job is not in the standard job list.
    Can someone help me to know more about the need of the web service and Can we stop this error by following sapnote 1163844.
    Thanks in advance
    Medha
    Edited by: MedhaD on Sep 2, 2010 8:52 PM

    Can someone help me plsss !!!!

  • Web Service Runtime

    Hi all,
    I am deploying a web service in a new system, but after I have created a web service correctly:
    1) I cannot see in wsadmin (maybe because it's obsolete?)
    2) I cannot test the service by the web service navigator
    I think some service have to be started, so I started
    1 bc
    2 soap
    3 srt
    4 rfc
    5 sap (namespace where my service are created)
    but I think something is missing
    can anybody please help me?

    hi , WSADMIN is obsolete but still it works
    u can test ur service from there or else u can try form SOAMANAGER
    tyr once again
    cheers
    afzal
    Edited by: mohammad afzal on May 6, 2009 10:20 AM

  • Web service-reset problem

    Hi all,
    i have a dashboard with 10 web services..
    i used label based menu and reset button in first screen .
    when i click reset button , reset button is reseted labels returns first label. and its ok.
    but i want reset web services filters.(exmp:_MAY_Kent filter is Sheet2.A100)
    if i use query with prompt , button resets prompt value.(Sheet2.A100). How can i do this with using web service ?

    Hi
    try to use refresh trigger
    map the output of label base menu to the TRIGGER CELL:

  • Reset of Web Services

    I have a Photosmart Premium model C410a and can not reset my Web Services so I can ePrint? Help.

    Hi Olmstead,
    How have you tried to reset Web Services?  Also, what kinds of issues have you been experiencing with ePrint? 
    Depending on what you've tried so far and what kinds of ePrint issues you're experiencing, the solution may vary.
    One method you can try is pressing the ePrint button on the front of your printer and disable Web Services, then re-enable it the same way.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • RPC web service session beans and local interfaces

    I am wondering if it is possible to use EJB 2.0's local
    interface (vs remote interface) with 6.1's RPC web service
    session beans. Since WLS generates the SOAP servlet that
    invokes the RPC session bean and I do not find
    a way to some how tell SOAP servlet to use local interface to
    get the session bean's local home interface, I am not sure
    this can be done.
    Any comments would be appreciated.
    Thanks.
    Peter

    Ta. Thanks for the info.
    Any idea when Local I/F support is due?
    -Nick
    "Neal Yin" <[email protected]> wrote:
    >
    "Nick Minutello" <[email protected]>
    wrote
    in message news:3d4413a4$[email protected]..
    I was just about to post the very same question - but for WLS 7.0.0.1.
    There are essentially two questions:
    1) (from a functional perspective)
    Can I expose Local Interfaces as SOAP using the auto-generation(servicegen ant
    tasks)?Local Interfaces support is coming.
    2) (from a performance perspective)
    Does the generated SOAP implementation go via the (expensive) RemoteInterface
    (ie marshalling) - or is the RMI marshalling optimised out (by setting<enable-call-by-reference>true</>)?
    You can set this option by yourself on your EJB. Web service runtime
    doesn't
    do any magic in this area.
    Regards,
    Nick
    "Peter" <[email protected]> wrote:
    I am wondering if it is possible to use EJB 2.0's local
    interface (vs remote interface) with 6.1's RPC web service
    session beans. Since WLS generates the SOAP servlet that
    invokes the RPC session bean and I do not find
    a way to some how tell SOAP servlet to use local interface to
    get the session bean's local home interface, I am not sure
    this can be done.
    Any comments would be appreciated.
    Thanks.
    Peter

  • SOAP Web Service Authentication configuration

    Hello,
    I've got a little problem with Web Service authentication configuration.
    I'm working on the SAP NetWeaver CE EHP1 7.11. I also have a XMII application deployed on the server and there are some SOAP Web Services(over XMII Transactions) that require basic authentication.
    I use all Web Services in the EJB layer. So, I've generated proxy using SAP NetWeaver as a Web Service Runtime for generation. And Iuse an injection mechanism to get a service implementation:
    @WebServiceRef(name="GetBatchListService")
    private XacuteWS batchListWS;
    In this case I could use Single Service Administration application in the NetWeaver Administrator@SOA Management@Application and Scenario Communication to configure basic authentication for EVERY Web Service. And this configuration disappears after every redeploy.
    The question is how and where could I configure authentication for all web services?
    I've read a lot of documentation, but, unfortunately, I haven't found needed one. I could see 2 direction of searching now, it might help:
    1) Destination: Configure HTTP Destination or Web Service Template Destination and use it in all Web Services proxies somehow.
    2) Find Configuration way: Create a configuration group or anything else to configure all services from one screen.
    Best Regards,
    Dmitry

    Dimtris,
    If your WSDL url is pointing to the URL of the Adapter Engine as shownin the Hot to Use the SOAP adapter there is no option. You cannot add it to the SOAP Url.
    But, if you change the SOAP Url to the Url shown in this blog by Stefan Grube then you can add the user id and pasword to the url by adding sap- user=userid and sap-password = password.
    The optin shown ion the blog by Grube can be used as long as you do not have to use SOAP attachments and in this  case you would not need both sender SOAP adapter and a sender agreement.
    /people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
    Regards
    Bhavesh
    Regards
    Bhavesh

  • Error while creating Web service

    i have just started working on web service and have installed WAS .
    i am trying to create a simple web service.
    After creating an EJB when i try to click on Context Web Services-->>Create Web Service i get an error "IWAB0234E An internal error occurred.".
    Thanks In advance.
    pankaj

    Hi Pankaj,
    This is a known WTP problem. See for example http://www.eclipse.org/webtools/jst/components/ws/M5/news/jst-ws-m5news.html and especially <a href="https://bugs.eclipse.org/bugs/show_bug.cgi?id=99728">Bug 99728</a>.
    Hopefully, if you select the configuration as "Server: SAP Server" and "Web service runtime: SAP Netweaver" on the first page of the wizard, this should work.
    HTH!
    -Vladimir

  • How to use call back and user session id based conversation with web service in weblogic 6.1 sp2 ?????????

    Hi, every one:
    Here's my question of my day - >>>
    I am using weblogic 6.1 SP2 right now - running on Unix and Win 2K, and
    I got a web service up and running called Price Update web service through
    which user can pick up a price and push a deal to another web service
    called: deal service, the deal service will take the user deal and book the
    deal ( sending a JMS message to a Queue, a MD will pick up and do the work,
    then send the confirmation to another JMS Queue ), then the confirmation
    will be picked up and sent to another web service , called: User Deal
    Confirmation Service, here's the question:
    1. Since the client application is only allowed to see its own confirmed
    deals, how I can make the confirmed deal encrypted based on a server
    generated key or the session id that client application provides
    2. Now, I have 3 webservices: update, deal and confirm, each of them has a
    client.jar file available - from the client application point of view, do I
    need all these 3 client.jar, or I just need one of them ?????
    3. How can I use web service call back in wls 6.1 sp2 ?????? - in the 7.0
    beta, you can do this easily in the workshop, in the second question above,
    I think I need some how relate the confirmation to the client conversation
    id ??
    thanks a lot for the input, have a nice day.
    regards,
    mark.

    Any comments ?
    mark
    "markhu" <[email protected]> wrote in message
    news:[email protected]..
    Hi, every one:
    Here's my question of my day - >>>
    I am using weblogic 6.1 SP2 right now - running on Unix and Win 2K,and
    I got a web service up and running called Price Update web service through
    which user can pick up a price and push a deal to another web service
    called: deal service, the deal service will take the user deal and bookthe
    deal ( sending a JMS message to a Queue, a MD will pick up and do thework,
    then send the confirmation to another JMS Queue ), then the confirmation
    will be picked up and sent to another web service , called: User Deal
    Confirmation Service, here's the question:
    1. Since the client application is only allowed to see its own confirmed
    deals, how I can make the confirmed deal encrypted based on a server
    generated key or the session id that client application provides
    2. Now, I have 3 webservices: update, deal and confirm, each of them has a
    client.jar file available - from the client application point of view, doI
    need all these 3 client.jar, or I just need one of them ?????
    3. How can I use web service call back in wls 6.1 sp2 ?????? - in the 7.0
    beta, you can do this easily in the workshop, in the second questionabove,
    I think I need some how relate the confirmation to the client conversation
    id ??
    thanks a lot for the input, have a nice day.
    regards,
    mark.

Maybe you are looking for