Residual item - data copied from invoice

Hi All -
When a residual item is posted in the system, per invoice - say using F-28, the new residual open item will have the Assignment number and reference number copied over from the invoice it is posted against.
I am trying to get other fields such as reference key 1/ ref key 2/ ref key 33 also to copy over to the residual new open item.
Is this achievable? If so, how... any suggestions really appreciated..
Thanks.
Edited by: kanth on Jan 27, 2010 9:22 AM

I found solution myself writing z* prog..

Similar Messages

F-44 F-32 residual item exchange rate from invoice

Hi gurus,
When doing clearing we need exchange rate of the residual item gets from choosen invoice.
We can get the rate from the invoice but could not change residual item's exchange rate.
I have Tried a few BTE's but no result. any user exit,badi or BTE for solution?
Message was edited by: Fatih

I found solution myself writing z* prog..

SRM validate the Catalog Item when copying from old templates

Do SRM validate the Catalog Item when copying from old templates and previous shopping carts? Is this standard functionality?
Thanks,
Rajan

Continuation to my previous post:
My findings based on the analysis I did. Might help people who are looking for similar info.
As Jason mentioned, the Subroutine name is CATALOG_CONTENT_VALIDATE_GET
This is under package BBP_SC --> Function Group: BBP_SC_APP
After making a webservice call to get catalog details, the mapping is done as below.
IF sy-subrc EQ 0.
    READ TABLE lt_enriched_item INDEX 1.
    IF sy-subrc EQ 0.
      ls_item_validate-price      = lt_enriched_item-price.
      ls_item_validate-currency   = lt_enriched_item-currency.
      ls_item_validate-price_unit = lt_enriched_item-price_unit.
      ls_item_validate-deliv_date = lt_enriched_item-deliv_date.
      ls_item_validate-leadtime   = lt_enriched_item-leadtime.
      ls_item_validate-unit       = lt_enriched_item-unit.
    ELSE.
      lv_validate_item_exception = gc_yes.
    ENDIF.
ELSE.
    lv_validate_item_exception = gc_yes.
ENDIF.
If you go one level deeper into subroutine PERFORM sc_itm_copy_to_basket, you can see that following validations are performed.
If EITHER price, currency or price unit changes, we get the message u201C&: Price changed due to catalog validationu201D
If UOM changes, we get the message u201C&: Unit of measure changed in catalog; item not transferredu201D
When Delivery date or lead time changes, no message is raised but the new values are copied.
In a nut shell, the fields that are considered for validation are Price, Currency, Price Unit, UOM, Delivery date, Lead Time.
Thanks,
Seyed

How to disable and hide the menu items of 'copy From' button of Goods Recei

hi expert,
I am new in SAP B1. so please help me.
Q:How to disable and hide the menu items of 'copy From' button of Goods Receipt PO form?
Regards
sanoj

Hi Sanoj,
Try This.....
If pVal.FormType = "143" And pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_ACTIVATE And pVal.BeforeAction = False Then
            oform = sbo_application.Forms.GetFormByTypeAndCount(pVal.FormType, "1")
            Dim oitem As SAPbouiCOM.Item
            oitem = oform.Items.Item("10000330")
            'To Disable the button
            oitem.Enabled = False
            'To hide the button
            'oitem.Visible = False
        End If
Thanks
Shafi
Edited by: shafi_sunshine on Sep 15, 2011 7:35 AM

Account assignment for service item not copied from PR in PO

Hi,
We have a PR created for a service item from SRM. When we run ME59 it automatically creates the PO without issues by copying the account assignment details from the PR. The problem is as follows:
1. If we try to manually create a PO using ME21N from this PR, the account assignment is not getting copied from the PR but it throws the account assignment pop up screen where we manually have to enter the account assignment.
2. The client is using a Z transaction of ME59 which is copy of Me59 but with a few validations (nothing to do with Account assignment). This Z Tcode also fails to create the PO with the error 'no account assignment'. Indicating that the PR account assignment details are not getting copied.
Note: This is happening for all PR's irrespective of whether its created in SRM or created using ME51N.
Please let me know if someone has faced a similar issue
Thanks,
Lakshmi

Hi,
Please check first if notes 1085214 and 1102653
could solve the issue.
Regards,
Edit

Copy Version-Budget data copied from one version to another-How to view Data in Copied Version.

Dear All,
Budget Data is copied from one Version to another Version using Tools>copy Version option. How can you view Data copied to new Version, when you receive a message Version is successfully copied.
I think we can do that by selecting appropriate version in the version dimension while accessing the Forms or in Smart View.
Can you please let me know how to do this or different options available with this process.
Thanks in Advance for your valuable time...

A form to check the data with the correct POV, a Smart View query, excel addin retrieve, financial report, export data, report script, take your pick.
Cheers
John
http://john-goodwin.blogspot.com/

Item not copied from Lead to opportunity (SAP CRM)

Hi guys,
I think that the object of tread is explicative
But i explain my problem: when i save a lead, with a certain status (yet customized), i want to the system create with follow up document an opportunity from my lead.
If i create a lead without product the system create an opportunity very well, but if i insert a product on my lead the systema don't create an opportunity, i see that in activity tab the event raise up but the opportunity is not create.
i have cusomized the action for process type and for category of item but it doesn't work.
Anybody can help me?
Thanks in advance.
Regards,
Luca

Check:
1. if you have set proper copy control between lead and opportunity transaction type under spro>crm>transactions>basic settings>copy control for business transactions>Define Copying Control for Transaction Types (you may wana try first without checkmark "Complete reference")
2. if you have set proper copy control for ITEMS between lead and opportunity ITEM types under spro>crm>transactions>basic settings>copy control for business transactions>Define Copying Control for Item Categories (first set checkmark just for "Copy PO data")
3. if you have set any copy control for ITEMS between lead and opportunity ITEM types under spro>crm>transactions>basic settings>copy control for business transactions>Define Item Category Determination when Copying (I suggest you first try without setting any entries in this customazing for your item types)
4. what method are you using for follow-up (I ussualy use COPY_DOCUMENT method)
Regards.

QM master Data copy from one client to another client

Hi QM guru...
Kindly suggest me how i will copy all qm master data from one client to another client
QM master Data like....Catlogs. MIC inspection method. sampling...etc
Kindly suggest me how i will copy all master data
Thanx
Regards
Akil

Dear Akil,
I think that LSMW can be of help in this case.
Otherwise, please check with your ABAPer whether any BDC is there for mass uploading of master data.
Regards,
Kaushik

How to enhance open Item data source from R/3 ??

Hello All,
I am trying to enhance the business content extractor for open items in R/3 . The data source is 0FC_OP_01. i know this is coming from the table DFKKOP.
I need to add sub GL ffield rom another table from DFKKOPK .
Please advise the step by step to enhance the existing structure and add the new field to the extractor.
Points will be rewarded for any helpful answers.
thanks in advance,
AG..

Hi,
please check out the forums, there are lot of threads about the issue 'how to enhance a datasource'. Just to give you a hint. Use transaction rsa6 in your source system for that. Here you can enhance the extract structure, the datasource and you can do the coding...
regards
Siggi

Items not copied from PR to PO

Hi
thirdparty order was created for 5 different items, same PR was created for all the items. But when user tried to create PO from the given PR system copied only 4 materials and not copied the 5th lineitem.. any possible reasons?
Reg
Shan1242

Hi,
check 4 th item is release or not if u have release procedure at item level
shakir
Edited by: Shakir on Jan 28, 2008 10:02 PM

PO prices and condition pricing date copied from previous PO using ME21N

We have defined a default for buyers with the TAB Price Adoption - "copying of conditions from last purchase order" set to Do Not Copy. We have assigned this default via parameter EVO to all of our buyers. When creating a purchase order using transaction ME21N and creating based upon previous purchase order all of the previous purchase order pricing and the condition pricing date is copied over. Isn't this what the parameter is supposed to prevent?
Any suggestions are appreciated.
Brian

No, copiing a complete PO is something different than creating a new PO where the price is usually taken from last PO if no price conditions are maintained in an info record.
You prevent only the second case with EVO parameter.

Transactional Data Copy from In-Active version to Active version(APO)

Hi
I want to copy the Transactional Planning data from Inactive version to Active version, so that from Active version I can transfer that data to ECC.
Kindly give the valuable inputs for my Query.
Regards
Guru
Edited by: gurvarender singh on Jan 31, 2009 11:18 AM

try the transaction /SAPAPO/VERCOP - to Copy Planning Version
select if u want to copy the entire version (master as well as transaction data)
u can also trigger parallel processing and also restrict
Restriction via
Location Product
Location
Locatn Type
Production Plannr
SNP Plannr
Demnd Plannr
Transptn Plannr
Purch. Group

Data copy from multiple members to multiple members

Guys,
I have a situation at my client where we have to copy data from the children of one hierarchy to children of another hierarchy.
Ex-
Entity(Dimension)
l
HM Entity
l l
l Hierarchy1
l l
l Member1
l Member2
l Member3
l
Entity_Input
l
Hierarchy2
l
Member1_Input
Member2_Input
Member3_Input
i am writing the below script
FIX (FY12, Budget, Final,)
FIX(@relative("HM Entity",0))
DATACOPY @CURRMBR("entity") to @MEMBER(@concatenate(@currmbr("entity"),"_INPUT"));
ENDFIX
ENDFIX
but when i validate it is throwing me an error saying that
"Invalid Calc Script syntax [DATACOPY @CURRMBR]"
can you guys help me on that.
Regards,
Ram.

With datacopy, you need to specify the member names.
e.g. datacopy membera to memberb;
You can use substitution variable, but
function is not working with datacopy.

Data copied from my PC to mac cannot be found

Hai,
I recently bought a mac mini and i have copied my files from my old computer to my new mac min. After migrating i cannot see the data to where it has been copied. But my storage shows there are movies, pictures and photos. when i open8 the folders i cannot fid the data in picutures movies or any other folder. where can i search for this data.

Hi joe,
i used migrate assistant by connecting my PC with a network cable.

Item texts copied from purchase order to delivery

Hi Sales Gurus,
I am facing the following issue.
In the intercompany process we create the delivery based on purchased order.
Our need is to copy the item texts of the purchase order to the item texts of the delivery.
How can i do that?
Thank you
João Fernandes

João,
Transaction VOTXN, Delivery, Item.
Then assign a specific text procedure and Access Sequence with the appropriate text ids.
Regards,
(Boa tarde)
Sérgio

Residual item - data copied from invoice

Similar Messages

Maybe you are looking for