Resolve error msg 26 In the Mrp list

Dear Gm,
How to resolve the below Error in the MRP list
26 Excess in Individual segment
Regards
Arun kumar K

hi
always post the error message number to provide solution for the errors in quick manner

Similar Messages

Error msg. states: the iPad "iPad" could not be updated. An unknow error occurrred (-1).

error msg. states: the iPad "iPad" could not be updated. An unknown error occurred (-1). My iPad is 16gb series 2 i believe wifi enabled

Hey there charlottefromwilliamsburg,
I see that you are experiencing and issue when attempting to update your iPad. Here is an article for you that may help you address this error:
Resolve iOS update and restore errors - Apple Support
http://support.apple.com/en-kw/TS3694
I would suggest that you particularly pay attention to the information in the following section, which addresses error codes such as the one you have been given:
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Hide the error msg for the mandatory fields

hi
how can i hide the error msg for the mandatory fields when they are not entered?? when i don't put a value in a mandatory field and commit the form, an error msg occurs teelling to enter the value for that mandatory field, but the error msg is not friendly at all and i want to hide it.
thnaks

User,
I'll assume you are talking about ADF Faces + ADF Business Components application, since you don't mention it.
If you are talking about the pop-up Javascript dialog box that pops up, you can do the following:
1). Set required=false on those fields in your JSP.
2). Set showrequired=true on those same fields so that there is a visual indication that the fields are required
3). Ensure the attribute to which the fields are bound have "mandatory" set to true in the BC's
Now, when you commit the form, you will not see the Javascript pop-up, but you will see a message in the af:messages component.
Best,
john

I have been having scripting errors that have not been able to be resolved by any of the measures listed on your Help page.

I've gone through the Help list under "Unresponsive Script Errors": I don't have Webroot SpySweeper; I tried letting the scripts run longer (selecting "Continue") but they keep coming up; my errors come up all the time, not just on certain websites; and I tried disabling add-ons to see if they were causing the problem, but they weren't. I have also completely cleared my cache several times and then updated Java, since I've heard outdated versions of this can cause scripting errors. I finally tried uninstalling and reinstalling Firefox (a clean reinstall, with no preferences saved), but that didn't work, either. Then I downloaded FileHippo and downloaded all other the updates it detected as being needed for my system, including Firefox Beta. Could my low RAM possibly cause my continued problems? Also, are scripting errors related to No Response errors? I am still getting these, too, after performing all except the most complicated remedial actions for them recommended on the Help page. (Both these types of errors started occurring for me at the same time.)

The error often has the name of the extension in it in some manner, '''supply the message wording''' then at least we'd have an idea of what you see. Plus we really don't know what you did look at, or what you actually tried of what you did look at.
For instance "AVG Free" shows something like tavgp in the message, if I recall correctly, so they aren't always real obvious unless you've seen it before.
But if you really went through some of help pages you would have tried in Safe Mode, gone through the diagnostics, and almost certainly gone through all your extensions turning half off then have of those on or have of those just turned off back on again and repeat -- not fun but it doesn't take a real long time, but I'd rather try other ways first, because I have a lot of extensions and many are already turned off because of Firefox changes for the worse, certainly not because I don't need them.

Error while saving the custom list created in visual studio 2010

Dear all,
when I am saving the list; I am getting the following error. I do not know where this could be wrong.
Any inputs will help. Now I am recreating a new list - thinking that the objects used in the earlier projects might conflict. Also few lists in the list tab - were throwing error of the same type - which is not functioning well.
warm regards,
sathya

To give more information on the code
Registration list
//Reference this Feature's parent object, which is SPWeb in this case
SPWeb currentWeb = properties.Feature.Parent as SPWeb;
//Reference the lists we need to manipulate.
SPList tList = currentWeb.Lists["TrainingTrainers"];
SPList rList = currentWeb.Lists["TrainingRegistration"];
//Reference the fields in the lists
SPFieldCollection rFields = rList.Fields;
SPFieldCollection tFields = tList.Fields;
//changes to the Trainers List
SPField fullNameField = tList.Fields["Full Name"];
SPField emailAddressField = tList.Fields["E-mail Address"];
SPField firstNameField = tList.Fields["First Name"];
SPField lastNameField = tList.Fields["Last Name"];
fullNameField.Required = true;
emailAddressField.Required = true;
firstNameField.Required = true;
lastNameField.Required = true;
fullNameField.Update();
emailAddressField.Update();
firstNameField.Update();
lastNameField.Update();
//Changes to the Registrations List
//Change the Display Name of the Title Field
SPField titleField = rFields["Title"];
titleField.Title = "RegistrationID";
titleField.Update();
//Add additional fields as necessary
rFields.Add("First Name", SPFieldType.Text, true);
rFields.Add("Last Name", SPFieldType.Text, true);
rFields.Add("E-mail Address", SPFieldType.Text, true);
rFields.Add("Phone Number", SPFieldType.Text, false);
rFields.Add("ClassID", SPFieldType.Text, false);
rList.Update();
//Make the ClassID column read-only because i will set this later
SPField classIDField = rList.Fields["ClassID"];
classIDField.ReadOnlyField = true;
classIDField.Update();
//Remove the Attachments column from the default view of the Trainers list
SPView tDefaultView = tList.DefaultView;
tDefaultView.ViewFields.Delete("Attachments");
tDefaultView.Update();
//Add new fields to the default view of the Registrations list
SPView rDefaultView = rList.DefaultView;
rDefaultView.ViewFields.Delete("Attachments");
rDefaultView.ViewFields.Add("First Name");
rDefaultView.ViewFields.Add("Last Name");
rDefaultView.ViewFields.Add("E-mail Address");
rDefaultView.ViewFields.Add("Phone Number");
rDefaultView.Update();
Classes list
//Reference the newly created Classes list and perform the following
//1. Set the display name of the "Title" column to "ClassID" and hide it from the New and Edit Forms
//2. Make the "ClassID" column not required
//3. Set the default value of the Registrations column to 0 and do not display it on the new form
//4. Add the built-in "Start Date" and "End Date" columns
//Reference the newly created classes list
SPWeb currentWeb = properties.Feature.Parent as SPWeb;
SPList classesList = currentWeb.Lists["Classes-List"];
//Title column update
SPField titleField = classesList.Fields["Title"];
titleField.Required = false;
titleField.ShowInNewForm = false;
titleField.ShowInEditForm = false;
titleField.Title = "ClassID";
titleField.Update();
//Registrations column updates
SPField registrationField = classesList.Fields["Registrations"];
registrationField.DefaultValue = "0";
registrationField.ShowInNewForm = false;
registrationField.Update();
//Add the Start Date and End Date columns to the list, ensure they both display Date and Time, and add them to the default view of the list
SPFieldDateTime startDate = currentWeb.Fields["Start Date"] as SPFieldDateTime;
startDate.DisplayFormat = SPDateTimeFieldFormatType.DateTime;
SPFieldDateTime endDate = currentWeb.Fields["End Date"] as SPFieldDateTime;
endDate.DisplayFormat = SPDateTimeFieldFormatType.DateTime;
classesList.Fields.Add(startDate);
classesList.Fields.Add(endDate);
SPView defaultView = classesList.DefaultView;
defaultView.ViewFields.Add(startDate);
defaultView.ViewFields.Add(endDate);
defaultView.Update();
classesList.Update();
To my sense - when I add the classes list - the error pops up.
the classid is tied to both these lists.

Costing error while change the mrp data

Hi dears,
This is Rem process. when i try to change the material master MRP data ex. ( mrp type M1 to M0)
system not allow to change and show the error as
Product cost collector 000000750122 is still active (assigned to PrCtr 50601-025)
pls give some hints to clear
Any program is there to change the MRP data for the material master in production server directly
thanks

Dear ,
Did you try MASS or MM70 Transction ?
If you do not want to go for Deletion flag of PCC , you need to settle the REM qty .You need to do product cost for semi finished product and finsihed product in KKF6N and after that you have to do mark and release in CK24N .For standard cat Estimate create std Cost estimation(CK11n) and std cost Estimation Mark & release(CK24) .
1.Backflush (confirmation) the Planned order - MFBF. Results planned order will Reduced and GR,GI, activity cost will be posted. U need not convert the planned order to production order, Confirmation for planned order only.
2.To see Backflushed documents MF12
3.Then Goto KKF6n to see the Manufaturing cost.
4.Over head calculation - (Co42)
5. Variance calculation (KKS6)
6.Settlement(KK87)
Try and revert back
Regards
JH

Error while executing the call list maintenance from the UI ???

Hello All
I am using CRM 6.0
I am want to open the call list maintenance from the IC manager screen the system sues transaction launcher to open it, the URL link defined in the back end is :
sap/bc/gui/sap/its/webgui/!?~transaction=CRMD_TM_CLDIST
but when the system calls the transaction, I got the error:
Transaction CRMD_TM_CLDIST?SAP-C is unknown
Then I have the SAP menu
Regards
Jacopo Françoise

Hi
i think this transaction can be called only in SAP GUI.
SAP has left some transactions (especially those for managers) in SAP GUI.
Regards
Radek

Unable to open PDF portfolio (Error Msg: "For the best experience, open this PDF portfolio in...)

I am having a problem opening an important PDF portfolio document using Adobe Reader (version 11.0.02) for Mac (Mountain Lion version 10.8.3).
When I attempt to open the file, I come up with the error message: "For the best experience, open this PDF portfolio in Acrobat 9 or Adobe Reader 9, or later", and I am unable to view the document. This is becoming very frustrating, as I am attempting to open the document with the new version of Adobe Reader (which I have downloaded multiple times).
If anyone has a solution for this problem that would be very helpful!
Thanks in advance.

Hi,
Thanks for the reply. No I'm not using iPad, I have a MacBookPro. I just wasn't sure which forum was best to post this question in.
I have flash but Adobe still won't open my documents.
Anyway, thanks for your help.
Lauren

Where can I see the error msg in the below code.

Hi Gurus,
Please have a look at the code.
 if abc is initial.
 return-message = cl_bsp_runtime=>get_otr_text( 'ZXYZ/ERR_EMPID' ).
 append test to test_tab.
 endif.
In the above code, Emp id input field is being checked as its mandatory. I would like to know where can I see the error message per the above code. what is get_otr_test??

go to SE63 and see it from there..
SE63-> Translation->OTR Objects->Short Text
in field Package key in 'ZXYZ'
and in field Text from OTR key in 'ERR_EMPID'
and go forward.
I hope this helps.
For more info see the link below
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/6ad43aa654be55e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/93/bccd3a00746f4ae10000000a11402f/frameset.htm
If useful answer..reward points and close the thread.
A.

Error in displaying the Global List of entries

Hi,
   I VC 7.0 i defined a Global List of Products for a Combo Box and written a Formula for filter based on user Selected Values...
   Filter is working good...
WHen the user selected drop down box on Product insted of displaying Text Values of the entres i defined in Global List it is displaying Key Values of the entries i defined in Global List
How can i correct this error
Thanks

Hi,
for this use this function module.so that it can display it full.
PARAMETER P_FILE LIKE IBIPPARMS-PATH.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = 'P_FILE'
    IMPORTING
      FILE_NAME     = P_FILE.

ECC 6.0 FI-AA Error msg AA480 The quantity on asset X will become negative

When trying to reverse an asset acquisition either from FI (AB08) or through a credit memo posting (ABGL), we get the error message AA480. Assets are quantity managed.
We have just upgraded to ECC 6.0 from 4.6C.
There are no relative notes for new release.
I will be greatfull if any one has any idea to solve the problem.
Thanks in advance,
Lily

Symptom
You post a complete retirement of a fixed asset that manages quantities. The fixed asset also permits negative values within at least one area. Next you attempt to reverse the retirement. The system displays error AA480 'The quantity on asset & & will become negative from this posting'.
Additional key words
XNEGA, AMSS_DOCUMENT_REVERSE, LAMDPU14, AA480, MENGE, MEINS
Cause and prerequisites
1. If the fixed asset contains negative values this results in positive amounts during the retirement.
2. The fixed asset manages quantities.
3. The cause is a program error.
Solution
Implement the source code corrections.

I am getting a error msg that The TMS configuration is inconsistent

hi everybody, can anyone tell me that how to do the configuration in STMS tcode, i trying to transport the release req but i am getting an error that The "TMS configuration is inconsistent". can any help out in this.....
Moderator message: a topic for "Netweaver Administrator", but please (re)search yourself before asking there.
Edited by: Thomas Zloch on Jul 15, 2010 12:52 PM

What is the file type?

Trying to set up photosmart d110a with mac and not able to. error msg..the software for this printer

HP Photosmart D110a
OS X Lion
The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software.

Asautomatically retrieving the software from Apple Software Update fails, manually downloading and indtalling the complete HP Printer Softwate package below should do the trick.
Then add the printer by clicking the Plus sign under Print & Scan:
http://support.apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers2.7.2.dmg
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Error Msg at the bottom of the screen while displText in SO10 transaction

we are in the process of upgrade sand box, If you go to SO10 transaction and select a text name field choose display button it displays the text, but at the left bottom of the screen showing the following message. I have clicked on it, it displays the message as shown below, will anyone give solution for it.
Full points for the answer.
Observe name ranges: Y,Z for customers, J_NC for partners, A..X for SAP
Message no. TD728
Diagnosis
You are editing a standard text whose name or ID does not correspond to the name range defined by SAP. Standard texts from the SAP standard version and customer-specific standard texts need to have separate name ranges to prevent data loss during a release upgrade.
In the case of standard texts, the initial letters Y and Z for text names and Y and Z for the text ID are reserved for customers.
System Response
The system sends an appropriate message.
Procedure
If you are working in a customer system, only create standard texts using the following naming convention:
Initial letter Y or Z in the text name with any text ID
or
Initial letter Y or Z in the text ID with any text name
If you are working in an SAP development system, only use the letters Y and Z for temporary test standard texts and delete them once they have been tested.

it is an infomessage. Just klick enter to proceed.
If your message does not start with Y or Z, then the texts can be overwritten by SAP with any update, release, patch... You must just remember this, when creating your texts.

When I switched over to the new 7.2 I inserted the password into my wife,s apple account here she started to get all my contacts, the problem was resolved but I lost the entire list of contact on my phoe, what to do now?

How do I reload all my contact, I lost it when I upgraded to 7.2, to no fault of apple, the bag is all mine.

Apps are forever tied to the Apple ID under which they were purchased. If your friend wants to be able to manage apps on their device using their own Apple ID, they will need to delete all the apps purchased using your Apple ID and buy their own.
Hopefully, you just updated your own Apple ID with the new email and didn't make the mistake of creating a new Apple ID. If you created a new ID, stop using it now, don't buy anything using it and go back and update the ID under which you purchased your apps.

Resolve error msg 26 In the Mrp list

Similar Messages

Maybe you are looking for