[resolved] mkinitcpio fills screen with errors after update to 3.4.4-3

bizzare errors, its trying to load every module it can think of? never had anything like this happen before.
when i tried to mkinitcpio myself after the auto fail, it looked for the old kernel.
[testuser@arch2 ~]$ sudo pac linux
resolving dependencies...
looking for inter-conflicts...
Targets (1): linux-3.4.4-3
Total Download Size: 40.52 MiB
Total Installed Size: 57.61 MiB
Net Upgrade Size: 0.05 MiB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
linux-3.4.4-3-x86_64 40.5 MiB 107K/s 06:29 [##########################################] 100%
(1/1) checking package integrity [##########################################] 100%
(1/1) loading package files [##########################################] 100%
(1/1) checking for file conflicts [##########################################] 100%
(1/1) checking available disk space [##########################################] 100%
(1/1) upgrading linux [##########################################] 100%
>>> Updating module dependencies. Please wait ...
ERROR: could not open directory /lib/modules/3.4.4-3-ARCH: No such file or directory
FATAL: could not search modules: No such file or directory
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.4.4-3-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [usb]
-> Running build hook: [keymap]
-> Running build hook: [fsck]
-> Running build hook: [sata]
-> Running build hook: [encrypt]
==> ERROR: module not found: `dm-crypt'
==> ERROR: module not found: `padlock_sha'
==> ERROR: module not found: `padlock_aes'
==> ERROR: module not found: `blowfish_common'
==> ERROR: module not found: `twofish_common'
==> ERROR: module not found: `cast6'
==> ERROR: module not found: `xts'
==> ERROR: module not found: `aes_generic'
==> ERROR: module not found: `rmd256'
==> ERROR: module not found: `crypto_user'
==> ERROR: module not found: `cryptd'
==> ERROR: module not found: `tgr192'
==> ERROR: module not found: `salsa20_generic'
==> ERROR: module not found: `vmac'
==> ERROR: module not found: `xor'
==> ERROR: module not found: `cts'
==> ERROR: module not found: `async_memcpy'
==> ERROR: module not found: `async_pq'
==> ERROR: module not found: `raid6test'
==> ERROR: module not found: `async_raid6_recov'
==> ERROR: module not found: `async_xor'
==> ERROR: module not found: `async_tx'
==> ERROR: module not found: `cast5'
==> ERROR: module not found: `deflate'
==> ERROR: module not found: `fcrypt'
==> ERROR: module not found: `algif_hash'
==> ERROR: module not found: `xcbc'
==> ERROR: module not found: `cbc'
==> ERROR: module not found: `seed'
==> ERROR: module not found: `tcrypt'
==> ERROR: module not found: `twofish_generic'
==> ERROR: module not found: `wp512'
==> ERROR: module not found: `sha256_generic'
==> ERROR: module not found: `sha512_generic'
==> ERROR: module not found: `crypto_null'
==> ERROR: module not found: `rmd160'
==> ERROR: module not found: `rmd320'
==> ERROR: module not found: `gf128mul'
==> ERROR: module not found: `authencesn'
==> ERROR: module not found: `pcrypt'
==> ERROR: module not found: `ansi_cprng'
==> ERROR: module not found: `ccm'
==> ERROR: module not found: `ecb'
==> ERROR: module not found: `arc4'
==> ERROR: module not found: `michael_mic'
==> ERROR: module not found: `lrw'
==> ERROR: module not found: `seqiv'
==> ERROR: module not found: `md4'
==> ERROR: module not found: `anubis'
==> ERROR: module not found: `tea'
==> ERROR: module not found: `camellia_generic'
==> ERROR: module not found: `sha1_generic'
==> ERROR: module not found: `md5'
==> ERROR: module not found: `af_alg'
==> ERROR: module not found: `rmd128'
==> ERROR: module not found: `crc32c'
==> ERROR: module not found: `algif_skcipher'
==> ERROR: module not found: `des_generic'
==> ERROR: module not found: `ctr'
==> ERROR: module not found: `blowfish_generic'
==> ERROR: module not found: `khazad'
==> ERROR: module not found: `pcbc'
==> ERROR: module not found: `ghash_generic'
==> ERROR: module not found: `hmac'
==> ERROR: module not found: `gcm'
==> ERROR: module not found: `zlib'
==> ERROR: module not found: `authenc'
==> ERROR: module not found: `serpent_generic'
==> ERROR: module not found: `sha1_ssse3'
==> ERROR: module not found: `aes_x86_64'
==> ERROR: module not found: `serpent_sse2_x86_64'
==> ERROR: module not found: `ghash_clmulni_intel'
==> ERROR: module not found: `aesni_intel'
==> ERROR: module not found: `twofish_x86_64'
==> ERROR: module not found: `twofish_x86_64_3way'
==> ERROR: module not found: `camellia_x86_64'
==> ERROR: module not found: `salsa20_x86_64'
==> ERROR: module not found: `blowfish_x86_64'
==> ERROR: module not found: `crc32c_intel'
-> Running build hook: [filesystems]
==> WARNING: No modules were added to the image. This is probably not what you want.
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.4.4-3-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [usb]
==> ERROR: module not found: `hwa_hc'
==> ERROR: module not found: `uhci_hcd'
==> ERROR: module not found: `ehci_hcd'
==> ERROR: module not found: `u132_hcd'
==> ERROR: module not found: `oxu210hp_hcd'
==> ERROR: module not found: `isp116x_hcd'
==> ERROR: module not found: `whci_hcd'
==> ERROR: module not found: `r8a66597_hcd'
==> ERROR: module not found: `ohci_hcd'
==> ERROR: module not found: `xhci_hcd'
==> ERROR: module not found: `sl811_hcd'
==> ERROR: module not found: `isp1362_hcd'
==> ERROR: module not found: `isp1760'
==> ERROR: module not found: `ums_sddr09'
==> ERROR: module not found: `ums_onetouch'
==> ERROR: module not found: `ums_karma'
==> ERROR: module not found: `ums_isd200'
==> ERROR: module not found: `ums_alauda'
==> ERROR: module not found: `ums_cypress'
==> ERROR: module not found: `ums_sddr55'
==> ERROR: module not found: `ums_eneub6250'
==> ERROR: module not found: `ums_datafab'
==> ERROR: module not found: `ums_jumpshot'
==> ERROR: module not found: `ums_freecom'
==> ERROR: module not found: `ums_usbat'
==> ERROR: module not found: `ums_realtek'
-> Running build hook: [keymap]
-> Running build hook: [fsck]
-> Running build hook: [sata]
==> ERROR: module not found: `eata'
==> ERROR: module not found: `sx8'
==> ERROR: module not found: `sata_svw'
==> ERROR: module not found: `sata_inic162x'
==> ERROR: module not found: `sata_vsc'
==> ERROR: module not found: `sata_sil'
==> ERROR: module not found: `sata_uli'
==> ERROR: module not found: `sata_mv'
==> ERROR: module not found: `sata_sis'
==> ERROR: module not found: `sata_sx4'
==> ERROR: module not found: `sata_via'
==> ERROR: module not found: `sata_qstor'
==> ERROR: module not found: `sata_nv'
==> ERROR: module not found: `sata_sil24'
==> ERROR: module not found: `sata_promise'
==> ERROR: module not found: `ahci'
==> ERROR: module not found: `ahci_platform'
==> ERROR: module not found: `pdc_adma'
==> ERROR: module not found: `ata_piix'
-> Running build hook: [encrypt]
==> ERROR: module not found: `dm-crypt'
==> ERROR: module not found: `padlock_sha'
==> ERROR: module not found: `padlock_aes'
==> ERROR: module not found: `blowfish_common'
==> ERROR: module not found: `twofish_common'
==> ERROR: module not found: `cast6'
==> ERROR: module not found: `xts'
==> ERROR: module not found: `aes_generic'
==> ERROR: module not found: `rmd256'
==> ERROR: module not found: `crypto_user'
==> ERROR: module not found: `cryptd'
==> ERROR: module not found: `tgr192'
==> ERROR: module not found: `salsa20_generic'
==> ERROR: module not found: `vmac'
==> ERROR: module not found: `xor'
==> ERROR: module not found: `cts'
==> ERROR: module not found: `async_memcpy'
==> ERROR: module not found: `async_pq'
==> ERROR: module not found: `raid6test'
==> ERROR: module not found: `async_raid6_recov'
==> ERROR: module not found: `async_xor'
==> ERROR: module not found: `async_tx'
==> ERROR: module not found: `cast5'
==> ERROR: module not found: `deflate'
==> ERROR: module not found: `fcrypt'
==> ERROR: module not found: `algif_hash'
==> ERROR: module not found: `xcbc'
==> ERROR: module not found: `cbc'
==> ERROR: module not found: `seed'
==> ERROR: module not found: `tcrypt'
==> ERROR: module not found: `twofish_generic'
==> ERROR: module not found: `wp512'
==> ERROR: module not found: `sha256_generic'
==> ERROR: module not found: `sha512_generic'
==> ERROR: module not found: `crypto_null'
==> ERROR: module not found: `rmd160'
==> ERROR: module not found: `rmd320'
==> ERROR: module not found: `gf128mul'
==> ERROR: module not found: `authencesn'
==> ERROR: module not found: `pcrypt'
==> ERROR: module not found: `ansi_cprng'
==> ERROR: module not found: `ccm'
==> ERROR: module not found: `ecb'
==> ERROR: module not found: `arc4'
==> ERROR: module not found: `michael_mic'
==> ERROR: module not found: `lrw'
==> ERROR: module not found: `seqiv'
==> ERROR: module not found: `md4'
==> ERROR: module not found: `anubis'
==> ERROR: module not found: `tea'
==> ERROR: module not found: `camellia_generic'
==> ERROR: module not found: `sha1_generic'
==> ERROR: module not found: `md5'
==> ERROR: module not found: `af_alg'
==> ERROR: module not found: `rmd128'
==> ERROR: module not found: `crc32c'
==> ERROR: module not found: `algif_skcipher'
==> ERROR: module not found: `des_generic'
==> ERROR: module not found: `ctr'
==> ERROR: module not found: `blowfish_generic'
==> ERROR: module not found: `khazad'
==> ERROR: module not found: `pcbc'
==> ERROR: module not found: `ghash_generic'
==> ERROR: module not found: `hmac'
==> ERROR: module not found: `gcm'
==> ERROR: module not found: `zlib'
==> ERROR: module not found: `authenc'
==> ERROR: module not found: `serpent_generic'
==> ERROR: module not found: `sha1_ssse3'
==> ERROR: module not found: `aes_x86_64'
==> ERROR: module not found: `serpent_sse2_x86_64'
==> ERROR: module not found: `ghash_clmulni_intel'
==> ERROR: module not found: `aesni_intel'
==> ERROR: module not found: `twofish_x86_64'
==> ERROR: module not found: `twofish_x86_64_3way'
==> ERROR: module not found: `camellia_x86_64'
==> ERROR: module not found: `salsa20_x86_64'
==> ERROR: module not found: `blowfish_x86_64'
==> ERROR: module not found: `crc32c_intel'
-> Running build hook: [filesystems]
==> ERROR: module not found: `gfs2'
==> ERROR: module not found: `libore'
==> ERROR: module not found: `exofs'
==> ERROR: module not found: `jfs'
==> ERROR: module not found: `lockd'
==> ERROR: module not found: `isofs'
==> ERROR: module not found: `cachefiles'
==> ERROR: module not found: `ext4'
==> ERROR: module not found: `ubifs'
==> ERROR: module not found: `jffs2'
==> ERROR: module not found: `hfs'
==> ERROR: module not found: `9p'
==> ERROR: module not found: `mbcache'
==> ERROR: module not found: `dlm'
==> ERROR: module not found: `cramfs'
==> ERROR: module not found: `quota_v2'
==> ERROR: module not found: `quota_tree'
==> ERROR: module not found: `quota_v1'
==> ERROR: module not found: `xfs'
==> ERROR: module not found: `hfsplus'
==> ERROR: module not found: `omfs'
==> ERROR: module not found: `autofs4'
==> ERROR: module not found: `ceph'
==> ERROR: module not found: `affs'
==> ERROR: module not found: `minix'
==> ERROR: module not found: `cifs'
==> ERROR: module not found: `vfat'
==> ERROR: module not found: `msdos'
==> ERROR: module not found: `fat'
==> ERROR: module not found: `ntfs'
==> ERROR: module not found: `fuse'
==> ERROR: module not found: `cuse'
==> ERROR: module not found: `ocfs2_dlm'
==> ERROR: module not found: `ocfs2_nodemanager'
==> ERROR: module not found: `ocfs2_stackglue'
==> ERROR: module not found: `ocfs2_stack_user'
==> ERROR: module not found: `ocfs2_stack_o2cb'
==> ERROR: module not found: `ocfs2'
==> ERROR: module not found: `ocfs2_dlmfs'
==> ERROR: module not found: `ncpfs'
==> ERROR: module not found: `jbd2'
==> ERROR: module not found: `nfs_acl'
==> ERROR: module not found: `btrfs'
==> ERROR: module not found: `kafs'
==> ERROR: module not found: `ufs'
==> ERROR: module not found: `fscache'
==> ERROR: module not found: `nilfs2'
==> ERROR: module not found: `nfs'
==> ERROR: module not found: `exportfs'
==> ERROR: module not found: `reiserfs'
==> ERROR: module not found: `ecryptfs'
==> ERROR: module not found: `befs'
==> ERROR: module not found: `logfs'
==> ERROR: module not found: `udf'
==> ERROR: module not found: `configfs'
==> ERROR: module not found: `nfsd'
==> ERROR: module not found: `squashfs'
==> ERROR: module not found: `coda'
==> WARNING: No modules were added to the image. This is probably not what you want.
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
[testuser@arch2 ~]$
[testuser@arch2 ~]$ sudo mkinitcpio
Password:
==> ERROR: unable to locate module directory for kernel `3.4.4-2-ARCH'
Last edited by hkmike (2012-07-18 15:15:57)

as suspected, i can't boot.
it looks like the udev hook isn't working, because when crypt is run it can't find /dev/sda8, and on the console there's no sd* in /dev/. udev was listed three times, as an early hook, normal hook, and clean up hook.
starting to think i'm going to need a recovery cd, but at a year old, will it even work?
na forget that, i'm chrooted in from fedora, debian wouldn't let me for some reason. edit: i think it was mounted noexec...
I've done:
pacman -Syu --ignore glibc
and that went fine
then tried
pacman -Su
and found i needed to delete those old kernel headers
then tried again and i get
error: failed to commit transaction (conflicting files)
glibc: /lib exists in filesystem
Errors occurred, no packages were upgraded.
but when i do this
[root@nb lib]# find /lib -exec pacman -Qo -- {} +|grep -v glibc
error: cannot determine ownership of directory '/lib'
[root@nb lib]#
it looks like everything unrelated to glibc is already gone, just the folder /lib itself is causing problems.
also i did a pacman -S linux, like i shouldn't have to begin with, but this time it was able to properly make a mkinitcpio image.
here's the other command the news page suggested to help fix the problem
[root@nb lib]# grep '^lib/' /var/lib/pacman/local/*/files
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/ld-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/ld-linux-x86-64.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libBrokenLocale-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libBrokenLocale.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libSegFault.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libanl-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libanl.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libc-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libc.so.6
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libcidn-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libcidn.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libcrypt-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libcrypt.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libdl-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libdl.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libm-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libm.so.6
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libmemusage.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnsl-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnsl.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_compat-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_compat.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_db-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_db.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_dns-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_dns.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_files-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_files.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_hesiod-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_hesiod.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_nis-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_nis.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_nisplus-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_nisplus.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libpcprofile.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libpthread-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libpthread.so.0
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libresolv-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libresolv.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/librt-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/librt.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libthread_db-1.0.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libthread_db.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libutil-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libutil.so.1
/var/lib/pacman/local/ld-lsb-3-3/files:lib/
/var/lib/pacman/local/ld-lsb-3-3/files:lib/ld-lsb.so.3
[root@nb lib]#
ok i see it now., its fixed. need to fix my terminal colours.
Last edited by hkmike (2012-07-18 15:15:04)

Similar Messages

  • Black screen with underscore after updating ubuntu on Lenovo G560

    hello everybody, I'm new here. I looked for this problem online during the past few days but I haven't found a solution. I have a Lenovo G560 and I divided my hard drive into two partition, I installed Ubuntu on C:\ and Windows on D:\ and I haven't had any problem, but after updating ubuntu to version 14 my computer couldn't boot anymore. the bios loads and I see the Lenovo icon but then I just get a black screen with an underscore (not a blinking underscore), I tried booting from a bootable USB stick but the same thing happened (I put it as the first device to boot from in BIOS settings). can anyone please tell me what are my other options ? what should I try now ? thanks in advance and have a good day !

    Hi s, and welcome to Apple Discussions.
    Try this:
    Hold down the Option+Command (Apple)PR keys, boot/restart your MBP while continuing to hold down those four keys, and after you hear the startup chime for the second time, release the keys. That should reset your PRAM and resolve the issue.
    If the issue persists, while you're booted into Open Firmware, just after the prompt, type in:
    reset-nvram
    then press return, then type in:
    reset-all
    and press return. This should restart your MBP and it should go back to starting normally.

  • Screen with gradients after update 10.4.6

    After installing the software update 10.4.6 i restarted my imac g5 intel and when i was going to the desktop my screen add gradients from yellow to red and black. I realized that the desktop was working as the gradients moved when i did expose of the windows, and itunes can play songs with the apple control remote.
    I hope you could help me with this,
    thanks regards

    I have the same thing happening on my Intel iMac. Installed 10.4.6, reboot and just get a black screen with yellow and red gradients across the top. I can't do anything!
    It works if I boot holding down the shift key, but does anyone have any suggestion, or an explanation on how to roll back the update?

  • I get white screen with logo after update OS 10.6.6

    Yesterday I download the update, get the message intall and turn off so I did it.
    Today i turn on the imac and it wont start, i get the white screen with the logo. I´ve triied almost everything...
    Change disc permissions
    Veryfy disc
    Restart on safe mode
    Turn on and off
    Please help!

    Try booting from your install disc again. Make sure that error was corrected.
    Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu and launch Disk Utility.
    (In Mac OS X 10.4 or later, you must select your language first from the installer menu)
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your startup disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 15% free space.

  • I had to reboot my iMac, it froze... When I went to reboot it started up as usual... Made power sound, showed apple logo (white screen)... And pin wheel started after 3 to 4 mins., went tblack screen with error messages. Rebooted 5x, won't go paspinwheel

    I had to reboot my iMac, it froze... When I went to reboot it started up as usual... Made power sound, showed apple logo (white screen)... And pin wheel started after 3 to 4 mins., went to black screen with error messages. Rebooted 5x, shot off power source, disconnected external devices... Now won't go past pinwheel... Since it does not go to black screen, I cannot convey error messages... Please advise what I could try... Thank you... I have an iMac 2009... Upgrade operating system to new system this spring... Don.

    It is guitardad's again... I read past topics on this issue... As I am not overly computer savvy, I want to be careful that I don't mess things up further... Of course the extended warranty is done... There is talk about booting from the system disc...  I'm not sure if this is the first thing to do or not... Can the support community, advise me on what logical steps I should take ( in order) or direct me to a website and/ or you tube video that walks one safely through the processes... Once again thank you for reading and offering your advice... I am on fixed $$$ so I'm trying to avoid calling apple, unless I have no options and/or the suggestions do not resolve the issues... Tx again Don.

  • I have an ipad mini with ios 7.1.1 it lags a lot and the lower part of the screen is shaky after updating to ios 7.1.1

    i have an ipad mini with ios 7.1.1 it lags a lot and the lower part of the screen is shaky after updating to ios 7.1.1

    Thank you for the advice Randy. Very helpful of you to jump in with a post that adds so much value for the OP.
    A bit of advice for you as a new user. Please refrain from making assumptions and using hyperbole. Both get in the way of providing useful support. Not "everyone" has tried the basics, let alone know what they are. That's why they're here. These first steps in troubleshooting often fix the issue being asked. If this thread doesn't answer your question, move on and find one that does. Feel free to skip the thousands that advise a reset.

  • Blue screen with error code and I have no recovery disks for HP Pavilion dv6-1260se

    I have a HP Pavilion dv6-1260se with factory installed operating system of Vista. When booting up the computer, I receive a blue screen with this error message: STOP:  c000021a {Fatal System Error}.
                                                                The verification of a KnownDLL failed.  system process terminated unexpectedly with
                                                                 a status of 0x0000221  (0x007fb9c0  0x00000000).
                                                                 The system has been shut down.
    I do not have recovery disks for this computer.  I tried to order them but them seem to not be available.  This is my daughter's computer.  She says she started to have trouble after downloading Frost Wire (music share) and then she removed it.  We tried going back to an earlier time and that didn't help and then the blue screen with error message appeared. What do I do now?
    This question was solved.
    View Solution.

    Hi,
    Assuming your in the US, recovery discs are available to order for that model here.  That may be the best option.
    You should also be able to do a recovery without the discs as well.  Take a look at this document: Recover Windows Vista Operating System Using HP Recovery, and look for the section Restore the PC to its original condition with the HP Recovery Manager if Windows Vista is not accessible.  This should allow you to recover the PC.
    R
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • My macbook13in has a blue screen with error code 10813

    my macbook 13in has a blue screen with error code 10813

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Also see:
    Reinstall OS X Without Erasing the Drive
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)

    File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
    Hi all,
      im having some troubles after the installation of SP19 (from SP16 in NW04) with File Adapter (File->Idoc scenario).
    In message monitoring (Adapter Engine), I have several messages with status "System Error". The error text is :
    <i>Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR
    ErrorText:   ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace 'http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,</i>
    Im sure that the Integration Directory settings have not been changed. So I tried the following, but the problem persists:
    - Deactivation/Activation of File Adapter channel
    - check that user XIISUSER is not locked
    - checked SXI_CACHE (it seems ok)
    - Many CPA full refresh
    - Dummy modifications of File Adapter channels (a dummy modification of the description)
    - Reboot J2EE
    I've seen that someone else had problems after upgrading to SP19. I'd really appreciate any suggestion of how to solve my issue.
    Thank you
    Manuel

    Hi Prabhu,
      I've already tried to restart server, but nothing happened. (Before update to SP19, the interface worked well).
    This is the error log from message monitoring:
    <i> 2007-01-16 16:37:34 Success Channel cc_File_Snd_Bolle: Entire file content converted to XML format
    2007-01-16 16:37:34 Success Send binary file  "BOLLE_20061229142059.CSV" from FTP server "AS810T:/sapinbound", size 8733 bytes with QoS EOIO
    2007-01-16 16:37:34 Success Application attempting to send an XI message asynchronously using connection AFW.
    2007-01-16 16:37:34 Success Trying to put the message into the send queue.
    2007-01-16 16:37:35 Success Message successfully put into the queue.
    2007-01-16 16:37:35 Success The application sent the message asynchronously using connection AFW. Returning to application.
    2007-01-16 16:37:35 Success The message was successfully retrieved from the send queue.
    2007-01-16 16:37:35 Success File "BOLLE_20061229142059.CSV" successfully archived on FTP server "AS810T" as "/sapinbound/bolle/20070116-163735-245_BOLLE_20061229142059.CSV"
    2007-01-16 16:37:35 Success The message status set to DLNG.
    <b>2007-01-16 16:37:35 Error Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText:   ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
    2007-01-16 16:37:35 Error Transmitting the message to endpoint http://SERVERNAME:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:. </b>
    2007-01-16 16:37:35 Success The asynchronous message was successfully scheduled to be delivered at Tue Jan 16 16:42:35 CET 2007.
    2007-01-16 16:37:35 Success The message status set to WAIT.
    2007-01-16 16:42:35 Success Retrying to send message. Retry: 1</i>
    After this, the system try to resend the message, and the same error appears several times.
    Ty,
    Manuel

  • IE8 unsupported error after updating to ZCM 11 Support Pack 1 (11.1)

    Does any experience this problem after updating to ZCM11sp1?
    I keep getting IE8 unsupported error after updating to ZCM 11 Support
    Pack 1 (11.1) although I am running on IE8 already. Now remote
    management is not working because of this incompatible browser errors. I
    tried this following
    link:http://www.novell.com/support/viewCo...9158&sliceId=1
    But it does not help.
    Any suggestion or idea would be greatly appreciated!!!

    On 8/29/2011 8:26 AM, craig wilson wrote:
    > Double Check all of your settings there, including the option to view
    > Intranet sites in compatibility mode.
    >
    > For some reason, your IE8 is reporting itself as IE7 and running in IE7
    > mode which is no longer supported.
    >
    > On 8/29/2011 9:17 AM, April wrote:
    >> Does any experience this problem after updating to ZCM11sp1?
    >>
    >> I keep getting IE8 unsupported error after updating to ZCM 11 Support
    >> Pack 1 (11.1) although I am running on IE8 already. Now remote
    >> management is not working because of this incompatible browser errors. I
    >> tried this following
    >> link:http://www.novell.com/support/viewCo...9158&sliceId=1
    >>
    >>
    >>
    >> But it does not help.
    >>
    >> Any suggestion or idea would be greatly appreciated!!!
    >
    >
    Thank you for your responding. I have already checked to view Internet
    sites in compatibility mode with no luck. I tried several different
    computers with IE8 but they all got the same problem.

  • Trouble with safari after updating SL 10.6.8

    I updated my OS last night to 10.6.8  and today, in Safari I find that I cannot view amazon.com  When I open a page, much of it is blank.  Anyone else having trouble with amazon after updating to 10.6.8?
    michelle

    (This is a copy of my post in this thread.)
    I updated to 10.6.8 too, was suddenly unable to print to my before perfectly working printer (an HP Color LaserJet CP1515n hooked up to an AirPort Express), and started scouring the web for solutions. The more I tried, the more disappointed and frustrated I became. Then I came here, read about a possible solution in this very thread (the disk image 'Repair10.6.8.dmg') and became hopeful again.
    But alas...
    Sadly, this isn't working for me at all. I ran the script that supposedly fixes the print problems introduced in 10.6.8, but the print jobs still all pause the printer and fail with a 'broken pipe' error. It has nothing to do with the USB cable, as I can print just fine with the printer directly hooked up to my Mac wit that very same cable. I reinstalled the drivers, updated my printer's firmware, ran the repair script twice just to be sure, reset the printing system, even deleted all preference files with 'hp' in the name and having to do with printing, restarted my Mac. All with no result.
    Man, this is so frustrating! Anybody with any other suggestions or possible solutions?

  • HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

    I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

    Hi were you able to resolve yours?
    I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
    Perform a hard reboot
    Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

  • Error after update : "Method 'Upgrade' does not have an implementation"

    Hello,
    After installing the last Updates for my SharePoint Farm 2013, I ran into an issue. When I try to connect to the site, I get this error :
    Method 'Upgrade' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy'
    from assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0, Culture=neutral,
    PublicKeyToken=71e9bce111e9429c' does not have an implementation.
    And there is a lot of strange behaviours within my farm. I cannot run a psconfig, the services FIMService
    and FIMSynchronizationService cannot start, I can see the category "Office 365" in Central Administration but I have a SharePoint Server 2013, not online or any 365 thing... And I cannot uninstall previous SharePoint Updates...
    Any idea ?
    Thanks in advance for your answer.
    Mike

    Hi Mike,
    If you are using SharePoint 2013 Server edition, please re-download the
    SharePoint Server 2013 SP1(KB2880552) instead of SharePoint Foundation version, then install it on the server and check results again, here is another post with similar
    issue you can take a look.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/ee5c9cee-2b8c-473a-adc6-05d74aac9511/error-after-update-installation-method-method-upgrade-in-type-?forum=sharepointadmin
    http://blogs.technet.com/b/stefan_gossner/archive/2014/04/22/sp1-for-sharepoint-2013-has-been-rereleased.aspx
    http://thesharepointfarm.com/2014/05/ms14-022-known-issues/
    Thanks
    Daniel Yang
    TechNet Community Support

  • Error after update Oracle SQL Developer Migration Tools

    Hi,
    I'm receiving a error after the update of Oracle SQL Developer (v.1.1.3.27.66) to work with mySQL migration tool.
    This error appear when it´s restarting:
    Exception Stack Trace:
    java.lang.IllegalAccessError: tried to access class oracle.ide.net.IdeURLStreamHandler from class oracle.ide.net.URLFileSystem$1
         at oracle.ide.net.URLFileSystem$1.createURLStreamHandler(URLFileSystem.java:87)
         at oracle.ide.boot.URLStreamHandlerFactoryQueue.createURLStreamHandler(URLStreamHandlerFactoryQueue.java:119)
         at java.net.URL.getURLStreamHandler(URL.java:1106)
         at java.net.URL.<init>(URL.java:393)
         at java.net.URL.<init>(URL.java:283)
         at oracle.ide.net.URLFactory.newURL(URLFactory.java:636)
         at oracle.ide.layout.URL2String.toURL(URL2String.java:104)
         at oracle.ideimpl.editor.EditorUtil.getURL(EditorUtil.java:150)
         at oracle.ideimpl.editor.EditorUtil.getNode(EditorUtil.java:122)
         at oracle.ideimpl.editor.EditorUtil.loadContext(EditorUtil.java:91)
         at oracle.ideimpl.editor.TabGroupState.loadStateInfo(TabGroupState.java:950)
         at oracle.ideimpl.editor.TabGroup.loadLayout(TabGroup.java:1751)
         at oracle.ideimpl.editor.TabGroupXMLLayoutPersistence.loadComponent(TabGroupXMLLayoutPersistence.java:31)
         at oracle.ideimpl.controls.dockLayout.DockLayoutInfoLeaf.loadLayout(DockLayoutInfoLeaf.java:123)
         at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:631)
         at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:628)
         at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:614)
         at oracle.ideimpl.controls.dockLayout.DockLayout.loadLayout(DockLayout.java:302)
         at oracle.ideimpl.controls.dockLayout.DockLayoutPanel.loadLayout(DockLayoutPanel.java:128)
         at oracle.ideimpl.editor.Desktop.loadLayout(Desktop.java:356)
         at oracle.ideimpl.editor.EditorManagerImpl.init(EditorManagerImpl.java:1879)
         at oracle.ide.layout.Layouts.activate(Layouts.java:784)
         at oracle.ide.layout.Layouts.activateLayout(Layouts.java:186)
         at oracle.ideimpl.MainWindowImpl$6.runImpl(MainWindowImpl.java:734)
         at oracle.javatools.util.SwingClosure$1Closure.run(SwingClosure.java:50)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
    Anyone knows why that is happining?
    Thanks in advance,
    Felipe.
    Message was edited by:
    felipe.b

    Hello,
    I get the same error after updating through Help->Check for Updates. I am at version 1.1.2.25 and the update does not change the version number of Oracle SQL Developer (Help->About), it remains at 1.1.2.25 (although if I look in extensions tab, it says: oracle.sqldeveloper 1.1.3.27.66 Loaded, possible bug in displaying version number?). These are the updates applied:
    Upgraded Extensions
    Oracle Microsoft Access Browser version 1.1.3.27.66
    Oracle SQL Developer - Snippet version 10.1.3.27.66
    Oracle SQL Developer version 1.1.3.27.66
    Oracle SQL Developer - Reports version 10.1.3.27.66
    Oracle SQL Server Browser version 1.1.3.27.66
    Oracle MySQL Browser version 1.1.3.27.66
    Oracle SQL Developer - Worksheet version 10.1.3.27.66
    Oracle SQL Developer - Extras version 1.1.3.27.66
    Oracle SQL Developer - SearchBar version 10.1.3.27.66
    Oracle SQL Developer - Object Viewer version 10.1.3.27.66
    I ran the update several times and was able to reproduce the error under a specific condition. If I am connected to a database at the time of the update I get the error. If I am not conneceted at the time of the update I do not get the error.
    As stated, by Donal, sql developer seems to get over the problem after restarting itself twice.
    Mark

  • Uncheck "Fill screen with one page at a time"

    Is it possible to set a javascript to turn off the preference "Fill screen with one page at a time" when entering in Full Screen mode? So that way, it will override Acrobat or Reader application preferences when the PDF is open on users computers.

    Everything that's supported is documented here: http://livedocs.adobe.com/acrobat_sdk/11/Acrobat11_HTMLHelp/JS_API_AcroJS.89.768.html
    Unfortunately, what you want isn't supported.

Maybe you are looking for

  • Finding query access frequency or how many times a query has been executed?

    Dear Experts I need to find the total number of access frequency of individual queries that are requested by the users say at a particular time. Say there are 20 distinct queries requested in the time difference of 3 hours. All of the 20 queries or s

  • How to restore itunes music and playlists but run from external HD?

    Hi all, I recently upgraded my macbook from Tiger to Snow Lepoard.  I backed up my entire HD onto my exteral harddrive and fromated my HD and rebooted with Snow Lepoard.  Is it possible to restore itunes to exactly how it used to be i.e. playlists et

  • Mandatory update not working on Mountain Lion...

    Is anyone else having problems installing the Folio Builder Panel update on Mountain Lion? I tried downloading the update from two different browsers and I'm getting the following error message every time: Any suggestions?

  • Camera iPod touch is not working

    Camera is not working. Tried resetting. Stopping app. Any good advice?

  • Two managed servers in one apache.

    Hi, I do not have too much experience with WLS, now I have two or more managed servers, each one run different apps, but I want to use the same apache server for the Front End(proxy). How to do it? I have tried this: in httpd.conf: <Location /weblogi