Resolver Service not created GlobalBank.ESB

Hi,
I followed the below instructions to create sample in Biztalk but didn't created GlobalBank.ESB application. Can any one suggest me what is the wrong?
https://msdn.microsoft.com/en-us/library/ff699854.aspx
Output from the install...
C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESBSource\Source\Samples\Re
solverService\Install\Scripts>sn -p ..\..\..\..\..\Keys\Microsoft.Practices.ESB.
snk C:\Users\nlaxmi\AppData\Local\Temp\__TPK
Microsoft (R) .NET Framework Strong Name Utility Version 4.0.30319.1
Copyright (c) Microsoft Corporation. All rights reserved.
Public key written to C:\Users\nlaxmi\AppData\Local\Temp\__TPK
C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESBSource\Source\Samples\Re
solverService\Install\Scripts>sn -t C:\Users\nlaxmi\AppData\Local\Temp\__TPK 1>
C:\Users\nlaxmi\AppData\Local\Temp\__TPK_TOKEN
C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESBSource\Source\Samples\Re
solverService\Install\Scripts>REM Copy original files
C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESBSource\Source\Samples\Re
solverService\Install\Scripts>copy ..\BRE\Policy\ResolveItinerary_Release.xml ..
\BRE\Policy\ResolveItinerary.xml
1 file(s) copied.
C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESBSource\Source\Samples\Re
solverService\Install\Scripts>copy ..\BRE\Policy\ResolveItineraryWithMessage_Rel
ease.xml ..\BRE\Policy\ResolveItineraryWithMessage.xml
1 file(s) copied.
C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESBSource\Source\Samples\Re
solverService\Install\Scripts>cscript .\ReplacePKToken.wsf "c2c8b2b87f54180a" C:
\Users\nlaxmi\AppData\Local\Temp\__TPK_TOKEN
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Replacing ..\BRE\Policy\ResolveItinerary.xml
ReplaceString - No match was found.
c2c8b2b87f54180a
cb6a5baa17b282fc
Replacing ..\BRE\Policy\ResolveItineraryWithMessage.xml
ReplaceString - No match was found.
c2c8b2b87f54180a
cb6a5baa17b282fc
C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESBSource\Source\Samples\Re
solverService\Install\Scripts>cscript .\ReplacePKToken.wsf "Core_PublickKey" "..
\..\..\..\Install\StringUtils\__TPK_TOKEN"
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Replacing ..\BRE\Policy\ResolveItinerary.xml
Replacing ..\BRE\Policy\ResolveItineraryWithMessage.xml
C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESBSource\Source\Samples\Re
solverService\Install\Scripts>.\ResolverService_Install.cmd
C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESBSource\Source\Samples\Re
solverService\Install\Scripts>powershell .\ResolverService_Install.ps1
WARNING: Running x86 PowerShell...
64 bit Machine
Install path found with value:
C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\
RulesDeployer Path
C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\bin
Solution Path:
C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESBSource\Source\Samples
Found registry entry for BizTalk Management DB.
BizTalk connection string is
server=C1CDT047;database=BizTalkMgmtDb;Integrated Security=SSPI
Microsoft (R) Build Engine version 4.0.30319.18408
[Microsoft .NET Framework, version 4.0.30319.18444]
Copyright (C) Microsoft Corporation. All rights reserved.
Building the projects in this solution one at a time. To enable parallel build,
please add the "/m" switch.
Build started 3/19/2015 2:01:39 PM.
Project "C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESBSource\Source\
Samples\ResolverService\ESB.ResolverService.Test.Client.sln" on node 1 (Rebuild
target(s)).
ValidateSolutionConfiguration:
Building solution configuration "Debug|Any CPU".
Project "C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESBSource\Source\
Samples\ResolverService\ESB.ResolverService.Test.Client.sln" (1) is building "C
:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESBSource\Source\Samples\Re
solverService\Source\ESB.ResolverService.Test.Client\ESB.ResolverService.Test.C
lient.csproj" (2) on node 1 (Rebuild target(s)).
CoreClean:
Creating directory "obj\Debug\".
PrepareForBuild:
Creating directory "bin\Debug\".
GenerateTargetFrameworkMonikerAttribute:
Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output fi
les are up-to-date with respect to the input files.
CoreCompile:
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Csc.exe /noconfig /nowarn:1701,
1702 /nostdlib+ /platform:anycpu32bitpreferred /errorreport:prompt /warn:4 /d
efine:DEBUG;TRACE /highentropyva+ /reference:"C:\Program Files (x86)\Referenc
e Assemblies\Microsoft\Framework\.NETFramework\v4.5\mscorlib.dll" /reference:
"C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramewor
k\v4.5\System.Core.dll" /reference:"C:\Program Files (x86)\Reference Assembli
es\Microsoft\Framework\.NETFramework\v4.5\System.Data.dll" /reference:"C:\Pro
gram Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.5\
System.dll" /reference:"C:\Program Files (x86)\Reference Assemblies\Microsoft
\Framework\.NETFramework\v4.5\System.EnterpriseServices.dll" /reference:"C:\P
rogram Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.
5\System.Runtime.Serialization.dll" /reference:"C:\Program Files (x86)\Refere
nce Assemblies\Microsoft\Framework\.NETFramework\v4.5\System.ServiceModel.dll
" /reference:"C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework
\.NETFramework\v4.5\System.Web.Services.dll" /reference:"C:\Program Files (x8
6)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.5\System.Xml.dll
" /debug+ /debug:full /optimize- /out:obj\Debug\Microsoft.Practices.ESB.Resol
verService.Test.Client.exe /subsystemversion:6.00 /target:exe /utf8output Pro
gram.cs Properties\AssemblyInfo.cs Properties\Settings.Designer.cs ResolverSe
rvice.cs "Web References\localhost\Reference.cs" "C:\Users\nlaxmi\AppData\Loc
al\Temp\.NETFramework,Version=v4.5.AssemblyAttributes.cs"
_CopyAppConfigFile:
Copying file from "app.config" to "bin\Debug\Microsoft.Practices.ESB.Resolver
Service.Test.Client.exe.config".
CopyFilesToOutputDirectory:
Copying file from "obj\Debug\Microsoft.Practices.ESB.ResolverService.Test.Cli
ent.exe" to "bin\Debug\Microsoft.Practices.ESB.ResolverService.Test.Client.ex
e".
ESB.ResolverService.Test.Client -> C:\Program Files (x86)\Microsoft BizTalk E
SB Toolkit\ESBSource\Source\Samples\ResolverService\Source\ESB.ResolverServic
e.Test.Client\bin\Debug\Microsoft.Practices.ESB.ResolverService.Test.Client.e
xe
Copying file from "obj\Debug\Microsoft.Practices.ESB.ResolverService.Test.Cli
ent.pdb" to "bin\Debug\Microsoft.Practices.ESB.ResolverService.Test.Client.pd
b".
Done Building Project "C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESB
Source\Source\Samples\ResolverService\Source\ESB.ResolverService.Test.Client\ES
B.ResolverService.Test.Client.csproj" (Rebuild target(s)).
Done Building Project "C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESB
Source\Source\Samples\ResolverService\ESB.ResolverService.Test.Client.sln" (Reb
uild target(s)).
Build succeeded.
0 Warning(s)
0 Error(s)
Time Elapsed 00:00:06.63
Policy Published Successfully: ResolveItinerary
Undeploying ruleset ResolveItinerary.
Policy Deployed Successfully: ResolveItinerary
Policy Published Successfully: ResolveItineraryWithMessage
Undeploying ruleset ResolveItineraryWithMessage.
Policy Deployed Successfully: ResolveItineraryWithMessage
C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\ESBSource\Source\Samples\Re
solverService\Install\Scripts>pause
Press any key to continue . . .

GlobalBank.ESB application will be created only when you run DynamicResolution
Setup.
run \Source\Samples\DynamicResolution\Install\Scripts\setup_bin.cmd to install GlobalBank.ESB application
on BizTalk Server.
thanks Rachit.

Similar Messages

Invoking a web service not created using oracle web service lib

Hi All,
I have a need to invoke my web service from oracle sql command. My web service not created using oracle web service library, but it is created using axis c++ libraries. Is it possible to do so,
Thanks in advance,
Regards,
Monica

In order to call out from the database process, is SQL (or PL/SQL) you need to generate some client code, that understand the details about the specific of the service you want to invoke and can produce the correct SOAP request. Once this proxy is uploaded in the Database, you can use it.
There is a set of Database Web services samples that should help you get started. You can also take a look at the developer's guide - see Developing a Web Service Client in the Database.
Hope it answers your question.
--eric

Shared Memory Service Not Created Yet

Hi Everyone,
I had to get a new printer because the baby did something to my old one and now it won't print clearly. I got an HP Officejet 4315 because it was the only one that said it supported 10.2.8. When I installed the software, I got a message saying, "Driver Not Installed." I checked the HP website, and they said to install the BSD from my CD's, which I did, now when I click on "HD Assistant" I get a message saying, "Shared Memory Service Not Created Yet."
I can't find anything on the HP or Mac websites about this error message. I e-mailed HP Support, they said to repair permissions and re-boot, which I did, but I still get that error message.
Please don't tell me to buy a new computer so I can get a new OS, because that's not financially feasible at the moment, since I'm a stay-at-home mom.

You're Welcome Lizzy!
Upgrading your Mac to Panther 10.3.x would be quite painless, and depending on whether it meets the Panther System Requirements, and the Additional Panther System Requirements, also relatively inexpensive.
If you know what to look for, a Full Retail Version, of the Panther Install CDs, can also be purchased rather inexpensively, at some additional online Apple retailers, Amazon, eBay, FastMac, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Panther is only on CDs, not DVDs.
Unless purchased from AppleRescue, the discs should look exactly like the images in the above links, and not say Upgrade, or CPU Drop-in DVD, on them.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
Shop Carefully, Examine All Documentation, And I Wish You Success!
Also, Thank You, for extending the courtesy, of awarding in Discussions.
ali b

Management Agent service not created with 10gR2 RAC DB install on Win2003?

Our 10gR2 RAC installation on Win2003 platform didn't create management agent service. After installing and setting up current release of OEM with Grid Control (10.1) and installing Management Agent from 10.1 OEM distribution (install additional management agents option), agent service is up and running. However, there is one small problem:
All target configuration xml files are created under 10.2 Oracle home, and agent running from 10.1 home does not see them - which means database, listener, etc are not registered in OEM.
Is this a known problem, and is there solution for it?
thanks,
Dejan Bogojevic
ps. message posted on metalink also

GlobalBank.ESB application will be created only when you run DynamicResolution
Setup.
run \Source\Samples\DynamicResolution\Install\Scripts\setup_bin.cmd to install GlobalBank.ESB application
on BizTalk Server.
thanks Rachit.

Clone to New Windows Hardware: appsTier Apache Service not Created

I am trying to migrate my production 11.5.9 apps on windows to new hardware. This is a one to one clone. The only things that are changing are:
1. OS User Name
2. Server Names
3. APPL Top, COMN Top, 8.0.6 Home and iAS Home on the target server.
I have completed the move of the dbTier to the new DB Node. When I run perl adcfgclone.pl appsTier on the new server for the APPS and WEB node it completes with no errors and creates a number of non-used servers but does not create the Appace or the Forms services.
Any help would be great!!! I need to have this done before the end of the weekend for testing!!!

I reviewed the logs but did not see anything... but I am not realy sure what to tlook for.
The postclone created 11 services like...
Oracle Web Intergration Service
OracleDiscoverer41_<NEW SID_NAME>
Oracle<NEW SID_NAME>_*

Oracle Management Server Service not created

Hello,
I created a Management Server Repository using OEMCA and an existing SID. According to the details displayed at the end of the wizard I assume that the process was finished successfully:
(NT-Service OracleOraHome81 ManagementServer is started...
Disconnect from oms@instancename....
Returning to connection system@instancename...
Process finished.
Yet the Oracle Management Server Service can not be found in SERVICES in the control panel...and therefore can't be started manually.
I have OS-Administrator Privileges.
I use Oracle 8.1.7 on WinNT.
Any help would be greatly appreciated.
Thanx
Stefan

I have this problem too. (posted a separate thread on
this before I read this one, sorry).
Here is my oms.nohup:
E:\oracle\ora81\sysman\log>tail -f oms.nohup
[main][2003-10-9:18:7:57:599] ORA-01017: invalid
username/password; logon denie
d
: ..../....@jdbc:oracle:oci8:@exorabsp
[main][2003-10-9:18:7:57:599]
VdbSession.processError: invalid connect string
VXA-2018 :
Anmeldung bei OMS-Registrierungsdienst nicht m�glich
oracle.sysman.vxn.VxnBootstrapException:
at
at
at
t
oracle.sysman.vxa.VxaAppServer.startServices(VxaAppSer
er.java:1353)
at
at
at
t
oracle.sysman.vxa.VxaAppServer.main(VxaAppServer.java:
547)
Fehler beim Hochfahren von Oracle Management Server.
Somehow, by reading the responses here - created new repository - I managed to get OMS working again.

Accounting entry against Excise invoice not created for Service Tax sales

Dear all,
I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco) - Domestic(Customer receivable reconciallation) account-Credit entry.
But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
Plz. suggest step by step guideline to resolve this issue.
Thanks & Regards,
Mukesh Pardeshi

Hi ReazuddinMD,
thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
Now i am geeting error as below at the time of saving Excise invoice,
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

Item not created because service agent AG not in reference document

While creating Shipment cost document through VI01 for inbound transportation getting the following error 'Item not created because service agent AG not in reference document '. PLease advice how to resolve this
Regards
Somnath Das

Hi,
Please Refer the following link...it will solve your issue....
VI01 - Item not created because service agent AG not in reference document
Regards,
Udaya.

Lion Server DNS service not working for locally created zones. Caching working fine.

OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?

I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

MSDAORA,IIS,ORA-12154: TNS:could not resolve service name

Hi All,
I have a Web Service that coded in VS2008, using ORACLE DB(9i).
At a time the application working fine and I can access and do everything with database.
Some other time database server is down for scheduled maintenance. If I try to run the application at this point of time it will raise err "ORA-12154: TNS:could not resolve service name".
When i reset iis it start to work fine for a while.Then same problem occurs again.
My connection string is connectionString="provider=MSDAORA.1;data source=***;user id=***;password=***;"
is there any solution?
i tried that;
If theire is multiple copies of OCIW32.dll you have to make sure that there is only one copy of OCIW32.dll which should be in /Bin folder of the oracle home folder.
Add the IUSR_machine name account and the IWAM_machine name account to the Oracle home folder. Give both accounts full control.
Create empty file tnsnames.ora in same directory as aspnet_wp.exe,

Hi,
The issue doesnt make much sense on the surface at least. 12154 means the client couldnt figure out what you were referring to with your Data Source= entry. If the database was taken down, I'd expect an "oracle not available" or some other sort of error, as the client should have still be able to resolve the entry at least, even if the database wasnt up at the time.
What do you mean by "When i reset iis it start to work fine for a while.Then same problem occurs again."? The same problem meaning you get 12154 when you take the database down? Or you get 12154 without a db restart?
Are you using TNSNames.ora for client naming resolution, or something else (ldap, for example)?
Greg

Problem: Socket connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time

Problem: Socket
connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time
Environment: -
OS:
Windows XP SP2/7
Code:
VC 6.0
Dll: MFC
Problem Description: -
We have written a utility program which create socket (Using windows standard method [MFC]), and then make connection with another service (List Display) running
on port 3334 in different machine and retrieve the required list data. This program was working fine in almost all the machines.
But, we have received a severe intermittent issue on two machines. Client is facing issue in displaying the list data from port 3334.
Attempt: -
First we tried to debug code, and we come to know that socket is not creating in utility program. So we tried to telnet on ListDisplay service port 3334 and we were surprised that we were able to telnet, then we opened some more
telnet window on same port 3334 around (6 to 8) window, and each cmd connected properly. But we were not able to create socket from utility program.
Problem is severe because issue is intermittent.
We have tried all the way, but we are not able to figure it out, that what can be the exact problem and what are the conditions, when utility program will not
connect with ListDisplay service on port 3334.
Kindly assist to resolve this issue. For any help, we would be really thankful.

Hi,
According to your description, it seems that you have created an utility program which is making connection with another service port 3334, however, two clients are facing issue in display the data list from port 3334.
Port: 3334/TCP
3334/TCP - Known port assignments (1 record found)
Service
Details
Source
directv-web
Direct TV Webcasting
IANA
Since the port 3334 is used by directv-web service, I'd like to suggest check this service it is working well on the problematic clients.
1. The client can be resolved in DNS well? Please run "nslookup" in the prompt command.
2. Is there any 3rd party application interrupting? Do test in clean boot.
2. Strongly suggest you run process monitor tool to analysis it.
I am looking forward to your reply if you have any updated on your side.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

ORA-12154: TNS:Could not resolve service name. (WIS 10901).

HI Gurus, we have the following scenario...
Weu2019ve installed Busines Objects EDGE 3.1 SP3.
The server of this installation is MS Windows Server 2003 Enterprise Edition SP2, Intel ® Xeon Enterprise TM CPU 2.80 GHz 6.5 RAM.
In the Server we have SAP R/3 Installed over a DB Oracle 9i Enterprise Edition Release 9.2.8.0.
We installed all BO bundle with successful and we can use the Designer Tool for create universe. In the creation of the universe, we created a connection to the database of the SAP R/3 System and the test runs well, we save and export the universe to CMS. Then, we used that universe in the WebI tool of the suite installed in the server, and it runs well (we call the universe, selected fields of the table, and after run the query, it gives us registers of the DB).
After all this, we open the InfoView and used the WebI and execute the same universe and the same steps. And when we execute the query the following error occurs .
A database error occured. The database error text is: ORA-12154: TNS:Could not resolve service name. (WIS 10901)
The connection to DB is through Designer and we use ODBC Oracle to create the Universe with the Client type and we used super user system, validated previously OK.
Any suggestion for this error?.
Thanks.
Betto.
Edited by: Alberto Magaña Chávez on Jul 9, 2011 7:44 PM

Make sure there are no syntax errors in the TNSNAMES.ORA file, look for unmatched parentheses. Also check the SQLNET.ORA file.
Is the environment is clustered, if so then make sure you have the ODBC connection in all the servers.

ORA-12154 Could not to resolve service name

I need some help. We have installed Oracle 8.1.6 for Windows NT on my PC one year ago. I also have Forms 5.0 on my PC that had connection service to Oracle database on Unix mashine. Now we don't have this database on Unix mashine so I desided to create a new small database on my PC in order to run some existing Forms. Using Oracle Net8 easy to config I created new service datamart/datamart@orc0 (It was possible only using IPC(local process) not TCP/IP). Now I can access my database using SQL*PLUS but I cannot to connect to this database using Forms. I have error message:
ORA-12154 Could not to resolve service name. Any Ideas?
Thanks in advance,
Galia

configure tnsnames.ora of home of developer.
Atul

12154: "Could not resolve service name"

[oracle@proton dbs]$ sqlplus system/manager@bcqa
SQL*Plus: Release 8.1.7.0.0 - Production on Fri May 4 16:00:00 2001
(c) Copyright 2000 Oracle Corporation. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve service name
I have read many documentations and I have no clue on what I'm doing wrong.. Here are the contents of a few .ora files:
listener.ora
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = proton.cityxpress.com)(PORT = 1521))
(PROTOCOL_STACK =
(PRESENTATION = TTC)
(SESSION = NS)
tnsnames.ora
PROTON.CITYXPRESS.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.11.19)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = bcqa.cityxpress.com)
sqlnet.ora
NAMES.PREFERRED_SERVERS =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = dbhost)(PORT = 1575))
NAMES.DEFAULT_DOMAIN = cityxpress.com
SQLNET.EXPIRE_TIME = 0
NAMES.DIRECTORY_PATH=(HOSTNAME)
lsnrctl started with no problem and here's the output from lsnrctl status:
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>
[oracle@proton admin]$ lsnrctl status
LSNRCTL for Linux: Version 8.1.7.0.0 - Production on 04-MAY-2001 16:10:13
(c) Copyright 1998 Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=proton.cityxpress.com)(PORT=1521))(PROTOCOL_STACK=(PRESENTATION=TTC)(SESSION=NS)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 8.1.7.0.0 - Production
Start Date 04-MAY-2001 16:10:06
Uptime 0 days 0 hr. 0 min. 7 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File /usr/oracle/network/admin/listener.ora
Listener Log File /usr/oracle/network/log/listener.log
The listener supports no services
The command completed successfully
[oracle@proton admin]$
<HR></BLOCKQUOTE>
Here's the output from using tnsping:
[oracle@proton admin]$ tnsping proton.cityxpress.com
TNS Ping Utility for Linux: Version 8.1.7.0.0 - Production on 04-MAY-2001 16:11:22
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=TCP)(HOST=proton.cityxpress.com)(PORT=1521))
OK (0 msec)
That's good, but look at this one:
[oracle@proton admin]$ tnsping proton
TNS Ping Utility for Linux: Version 8.1.7.0.0 - Production on 04-MAY-2001 16:12:11
(c) Copyright 1997 Oracle Corporation. All rights reserved.
TNS-03506: Failed to create address binding
Any help would be greatly appreciated, thanks.

you have a listener problem at least.
The status request to lsnrctl reports "no service". If the listener does not support any service, no connection.
configure a service using "netasst".
Regards
null

"Database Log In Failed - TNS could not resolve service name"

Hello.
I have an installation of Oracle 10g Release 2 (10.2) for Microsoft Windows (32-Bit) using WinXP Pro on my computer.
I have also installed the compantion CD on the same machine (In a separate home directory) so that I can use PL/SQL.
I have searched through the forum threads but haven't found any similar problem. The solutions that fixed other peoples problem don't seem to be applicable to mine.
I have created a user 'antagning' and some tables and also some PL/SQL procedures that compile fine. When I request
http://localhost:7777/pls/projekt/firsttest
(firsttest is the procedure. doesn't take any params)
I get the famous
Database Log In Failed
TNS could not resolve service name
Verify that the TNS name in the connectstring
entry of the DAD for this URL is valid.
This is my DAD file:
<location /pls/projekt>
SetHandler pls_handler
PlsqlDatabaseUsername antagning
PlsqlDatabasePassword antagning
PlsqlDatabaseConnectString ORCL
PlsqlAuthenticationMode Basic
PlsqlErrorStyle DebugStyle
</location>
and my tnsnames.ora looks like: (there is only one on the machine so there is no conflicting setups I think)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =
localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
finally, this is my sqlnet.ora:
# sqlnet.ora Network Configuration File: c:\oracle10g\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
I haven't set any default domain because the database runs on my local computer and not on a microsoft server in a domain. Is that correctly concluded?
I get an OK message when I ping my TNS with "tnsping orcl" (Maybe that information is not relevant in the context)
My webserver is started and is running fine (I think). If I request:
http://localhost:7777/pls/projekt (without any procedure name)
I get the message that no procedure is specified to run so I get some sort of answer from the webserver, so far so right.
When I log in using sqlplus with my own created user account I have to leave the database field empty or the login will fail. If I specify the field with the string orcl
the login will fail. Does that imply that something is not quite right? Maybe that hasn't got anything to do with the failure message.
/Fredrik

Has anyone resolved the problems with using TNSFormat?
As is, I want to move to a shared server setup and to do that I want to use TNSFormat and point to a tns entry which is setup for IPC+Shared connection.
But the Oracle Home that has the Oracle HTTP Server (from the companion CD) does not have SQL*net installed and does not seem to understand TNS.
I have TNS_ADMIN setup, I have ORACLE_HOME_LISTENER poiting to the DB Home.
for the OHS home, using "sqlplus login/pw@ipcshared" works, but "tnsping ipcshared" does not, since tnsping does not exist in the OHS home.
I cannot install SQL*Net from the CD1, since it requires a dedicated/new home and does not want to install in the OHS Home.
The only format that works in a dedicated OHS Home setup is ServiceNameFormat.
Any help or input would be very helpful.
Regards
ps. This is a redhat linux setup.
Message was edited by:
Oli_t

Resolver Service not created GlobalBank.ESB

Similar Messages

Maybe you are looking for